Pecco SK 140 - Allied Crane

Pecco SK 140
Slipring Section
14'-0" (4.27m)
185 ft (56.3m)
S16/P14 Transition
1'-9" (0.53m)
4,400 lbs
2 000 kg
168 ft (51.2m)
5,300 lbs
2 400 kg
S35/S16 Transition
1'-1" (0.32m)
1 x P14
4 x 14'-9"(4.5m) = 59'-1" (18.0m)
Standard S16 tower sections
10 x14'-9" (4.5m) = 147'-8" (45.0m)
151 ft (46.1m)
6,200 lbs
2 800 kg
135 ft (41.0m)
7 x 19'4" (5.9m) = 135'-6" (41.3m)
Standard S35 tower sections
5.9m
7,300 lbs
3 300 kg
19'-4"
Standard S16 tower sections
S16/P14 Transition
1'-9" (0.53m)
1 x P14
Slipring Section
14'-0" (4.27m)
Allied
101 ft (30.8m)
FREESTANDING
10,360 lbs
4 700 kg
Stationary
Hook Heights
No. of
Towers
Tower
Configuration
l
Height
Under Hook
Tower
Configuration
ll
Height
Under Hook
1
S35
ft
31.2
m
9.5
S16
ft
25.9
m
7.9
2
S35
50.6
15.4
S16
40.7
12.4
3
S35
70.0
21.3
S16
55.4
16.9
4
S35
89.3
27.2
S16
70.2
21.4
5
S35
108.7 33.1
S16
85.0
25.9
8'-0"
6
S35
128.1 39.0
S16
99.7
30.4
2.4m
7
S35
147.4 44.9
S16
114.5 34.9
S35/S16 Transition 148.5 45.3
Configuration II
S16
129.3 39.4
9
S16
163.2 49.8
S16
144.1 43.9
10
11
S16
178.0 54.3
S16**
158.8 48.4
S16
S16*
192.8 58.8
S16/P14 Transition
—
—
P14 Slipring
—
—
8
Configuration I
207.6 63.3
12
13 S16/P14 Transition —
—
14
P14 Slipring
—
—
* Remove top climbing unit from crane prior to operating crane at maximum hook height.
** Lower top climbing unit to base of crane prior to operating crane at maximum hook height.
Other tower combinations are possible.
www.alliedcraneltd.ca
604-467-4130
[email protected]
50'-3"
190'-8"
15.3m
57.9m
9'-1"
2.77m
Pecco SK 140
7.95m
26'-1"
Configurations
6.07m
19'-11"
Allied
6'-3"
1.9m
9'-4"
7'-6"
2.29m
39.3m
128'-11"
4.5m
14'-9"
S16 Tower section
Reinforcing steel
Elevation
9.1m min.
Anchor (4)
Concrete pad (4)
Reinforcing steel
each way

6'-7"

BOTTOM CLIMBING
with S16 Tower Sections
Inside Structure

Plan View

6'-7"
2 000mm
IMPORTANT!Please consult crane‘s operation manual before erecting, operating,climbing and dismantling crane.
FOUNDATION DETAILS
with S16 Tower Sections
Concrete Slab
2 000mm
9'
2
82
-3
3/
9m 8"
m
30'-0" min.**
8 x 14'-9" (4.5m) = 118'-2" (36.0m)
2.84m
Configurations
Pecco SK 140
Allied
* Lower the top climbing unit to the uppermost tie-in prior to operating
crane at maximum hook height.
** NOTE! When bottom climbing, the minimum distance between
climbing frames is determined by the number of tower sections installed
above uppermost frame and length of jib assembly installed.
137'-11" (42.0m) max.*
NOTE! If hook height exceeds 330 ft (100m), the number of tower
sections above the uppermost tie-in location MUST be reduced by 1
tower section.
*Hydraulic Top
Climbing Unit
[Site conditions dependent]
Direction of jib
when climbing.
[Site conditions dependen]
Tie-in
Collar
Tie-in
Struts
➜
6'-3" min.
1.9m min.
44'-3" (13.5m) min.
Face of
Structure
Tie-In
Assembly
113'-2" (34.5m) max.
Centerline
of Crane
88'-6" (27.0m) max.
Anchor
Shoe
TIE-IN ASSEMBLY
Plan View
NOTE! The tie-in assembly shown above is an example of a typical
installation. Please note, however, that factors determining the installation of tie-in assemblies may vary due to project specific criteria.
TOP CLIMBING
with S16 Tower Sections
Tied to Structure
Radius and Capacities
Pecco SK 140
2-Part Line
Maximum
Hook
Radius Capacity – Radius
185 ft
56.3m
168 ft
51.2m
151 ft
46.1m
135 ft
41.0m
101 ft
30.8m
13,800 lbs – 71 ft
6,250 kg – 21.8m
13,800 lbs – 75 ft
6,250 kg – 22.8m
13,800 lbs – 76 ft
6,250 kg – 23.2m
13,800 lbs – 77 ft
6,250 kg – 23.6m
13,800 lbs – 78 ft
6 250 kg – 23.9m
ft
43
53
62
72
82
92
m
13.0
16.0
19.0
22.0
25.0
28.0
101 112 121 128 135 144 151 161 168 177 185
30.8 34.0 37.0 39.0 41.0 44.0 46.1 49.0 51.2 54.0 56.3
lbs 13,808 13,800 13,800 13,640 11,840 10,360 9,190 8,250 7,450 6,990 6,570 6,020 5,560 5,270 4,890 4,650
4,400
kg 6,250 6,250 6,250 6,200 5,370 4,700 4,170 3,740 3,380 3,170 2,980 2,730 2,520 2,390 2,220 2,110
2,000
lbs 13,800 13,800 13,800 13,800 12,480 10,930 9,720 8,710 7,870 7,390 6,970 6,390 5,890 5,600 5,300
kg 6,250 6,250 6,250 6,250 5,660 4,960 4,410 3,950 3,570 3,350 3,160 2,900 2,670 2,540 2,400
lbs 13,800 13,800 13,800 13,800 12,740 11,180 9,920 8,910 8,050 7,560 7,120 6,530
6,200
kg 6,250 6,250 6,250 6,250 5,780 5,070 4,500 4,040 3,650 3,430 3,230 2,960
2,800
lbs 13,800 13,800 13,800 13,800 13,010 11,400 10,140 9,080 8,220 7,720 7,300
kg 6,250 6,250 6,250 6,250 5,900 5,170 4,600 4,120 3,730 3,500 3,300
lbs 13,800 13,800 13,800 13,800 13,230 11,680 10,360
kg 6,250 6,250 6,250 6,250 6,000 5,300 4,700
Capacity
14,000 lbs/6 350 kg
13,800 lbs (6 250 kg)
2-Part Line
12,000 lbs/5 440 kg
10,360 lbs
4 700 kg
10,000 lbs/4 540 kg
7,300 lbs
3 300 kg
8,000 lbs /3 630 kg
6,200 lbs
2 800 kg
5,300 lbs
2 400 kg
6,000 lbs /2 720 kg
4,400 lbs
2 000 kg
4,000 lbs/1 815 kg
2,000 lbs /905 kg
0
Jib Radius in feet
In meters
30
9.1
40
12.2
50
60
70
80
90
15.2 18.3 21.3 24.4 27.4
101 110
30.8 33.5
120
36.6
135
41.0
151 160 168
46.1 48.8 51.2
185
56.3
Specifications
Pecco SK 140
Hoist Speed and Capacity
Hoist Unit
2-Part Line
Gear
105 hp (78 kW) AC hoist unit
4-speed gearbox
Remote-controlled gear shifting
Eddy current brake
CapacityLine Speed CapacityLine Speed
1
up to 13,800 lbs
@ 110 fpm
up to 6 250 kg
@ 34 m/min
2
3
4
up to 13,800 lbs
@ 178 fpm
up to 6 250 kg
@ 54 m/min
up to 9,260 lbs
@ 282 fpm
up to 4 200 kg
@ 86 m/min
up to 5,500 lbs
@ 440 fpm
up to 2 500 kg
@134 m/min
NOTE! Capacities and line speeds indicated will vary depending on the amount of hoist rope installed. This crane model may be equipped with a hoist unit other than that
specified in the data above. To verify, check the serial number of the crane and refer to the Pecco SK 140 Operation Manual for additional information.
Motor Information
Drive Unit
Trolley (2 part line)
Swing
Horsepower
Kilowatts
6.5 hp
4.8 kW
2 x 6.5 hp
2 x 4.8 kW
Speed
12.5 – 250 fpm
Power Requirements
480 Volts — 3-phase — 60-cycle — 250 Amperes service with 105 hp (78 kW) hoist unit
Specifications subject to change without notice.
4 – 76 m/min
1.0 rpm
Specifications
Dimensions
Description
LxWxH
Tower Top
H
L
Turntable (Complete)
Upper & Lower Parts
W
H
L
W
Turntable
Upper Part1
L
W
Turntable
Lower Part2
L
W
H
H
Hoist Unit with Frame3
(105 hp/78 kW)
H
L
W
Operator’s Cab
H
L
W
Cab Access Platform
H
L
Counterjib 4
Pecco SK 140
W
H

L
W
27'-4" x 6'-7" x 8'-5"
8.3m x 2.0m x 2.57m
3,800 lbs
1 725 kg
8'-0" x 7'-9" x 6'-4"
2.43m x 2.35m x 1.94m
9,300 lbs
4 220 kg
8'-0" x 7'-9" x 3'-9"
2.43m x 2.35m x 1.15m
5,600 lbs
2,540 kg
6'-3" x 6'-1" x 2'-7"
1.9m x 1.85m x 0.79m
3,700 lbs
1,680 kg
8'-4" x 5'-1" x 3'-6"
2.54m x 1.55m x 1.07m
5,800 lbs
2, 630 kg
6'-1" x 3'-11" x 6'-11"
1.85m x 1.2m x 2.1m
Dimensions
Weight
50'-10" x 6'-2" x 8'-0"
15.5m x 1.89m x 2.43m
6,400 lbs
2,905 kg
51'-2" x 5'-7" x 7'-4"
15.6m x 1.69m x 2.24m
5,500 lbs
2,495 kg
H
34'-5" x 5'-7" x 6'-8"
10.5m x 1.69m x 2.03m
2,800 lbs
1,270 kg
H
34'-5" x 5'-6" x 6'-7"
10.5m x 1.68m x 2.02m
1,900 lbs
860 kg
H
17'-8" x 5'-6" x 7'-0"
5.38m x 1.68m x 2.14m
1,000 lbs
455 kg
H
2'-9" x 6'-1" x 7'-5"
0.85m x 1.86m x 2.26m
450 lbs
205 kg
Weight Description
800 lbs
365 kg
LxWxH
Jib Section➀
H
L
W
Jib Section➁
H
L
W
Jib Section➂
L
W
L
W
Jib Section➃
Jib Section➄
L
W
Jib Section➅

L
W
1,200 lbs
545 kg
Jib Assembly 5
185-ft (56.3m)
➀➁➂➃➄➅
186'-2" x 6'-2" x 8'-0"
19,550 lbs
56.75m x 1.89m x 2.43m 8,870 kg
46'-4" x 5'-11" x 7'-4"
16,500 lbs
14.1m x 1.8m x 2.23m
7,485 kg
Jib Assembly5
168-ft (51.2m)
➀➁➂➃➅
169'-5" x 6'-2" x 8'-0"
18,550 lbs
51.65m x 1.89m x 2.43m 8,415 kg
8'-0" x 1'-2" x 7'-0"
7,715 lbs
2 .45m x 0.35m x 2.13m 3,500 kg
Jib Assembly 5
151-ft (46.1m)
➀➁➂➄➅
152'-9" x 6'-2" x 8'-0"
17,650 lbs
46.55m x 1.89m x 2.43m 8,005 kg
4'-6" x 1'-2" x 4'-8"
1.38m x 0.35m x 1.42m
3,305 lbs
1,500 kg
Jib Assembly 5
135-ft (41.0m)
➀➁➂➅
136'-0" x 6'-2" x 8'-0"
16,650 lbs
41.45m x 1.89m x 2.43m 7,550 kg
14'-11" x 7'-7" x 7'-7"
5,500 lbs
4.55m x 2.3m x 2.3m 2,500 kg
Jib Assembly 5
101-ft (30.8m)
➀➁➅
102'-6" x 6'-2" x 8'-0"
15,035 lbs
31.25m x 1.89m x 2.43m 6,820 kg
8'-7" x 8'-7" x 2'-0"
2.6m x 2.6m x 0.61m
4,000 lbs
1,815 kg
Top Climbing Unit
with Hydraulics (S16)
19'-5" x 7'-10" x 8'-0"
5.92m x 2.4m x 2.44m
8,900 lbs
4,040 kg
Tie-in Collar
(S16)
8'-1" x 7'-9" x 1'-1"
2.46m x 2.36m x 0.33m
1,610 lbs
730 kg
Trolley
14'-0" x 6'-2" x 6'-2"
4.27m x 1.88m x 1.88m
4,250 lbs
1,930 kg
Hook Block
10'-4" x 6'-0" x 4'-9"
3.14m x 1.82m x 1.45m

Counterweight
Block A
H
L

Counterweight
Block B
H
L
Tower Section
S16
Transition Section
S16/P14
Slipring Tower Section
(P14)
W
H
L
W
H
L
Tower Section
S35
Transition Section
S35/S16
W
W
H
L
W
H
L
W
H
L
W
23'-6" x 9'-9" x 9'-3"
13,200 lbs
7.16m x 2.97m x 2.82m 5,990 kg
H
L
W
H
L
W
H

L
W
H
L
W
10'-11" x 1'-7" x 10'-2"
3.33m x 0.48m x 3.1m
3,300 lbs
1,500 kg
6'-7" x 6'-3" x 3'-2"
2.0m x 1.9m x 0.97m
750 lbs
340 kg
2'-2" x 1'-0" x 3'-8"
0.66m x 0.3m x 1.12m
800 lbs
365 kg
NOTE: Weights and dimensions are approximate. Scale components before lifting.
1
2
3
4
5
Turntable Upper Part includes swing motors. Does not include slewing ring and slewing ring support.
Turntable Lower Part includes slewing ring and slewing ring support. Does not include Upper Part with swing motors.
Does not include wire rope.
Includes 105 hp (78 kW) hoist unit, electrical panel, handrails and suspension. Does not include wire rope.
Jib Assemblies include jib sections, pendant cables, trolley drive unit, trolley wire rope, trolley and hook block.
www.alliedcraneltd.ca
604-467-4130
[email protected]

Download Report