Technical data sheet · LÜTZE SUPERFLEX® N (C) PVC UL For high requirements PVC control cables · C-track compatible · shielded Subject to technical modification A1391404 Identification Use/Area of application Application Properties Technical data UL approval Type Part-No. (4G2,5) A1391404 • Shielded cable suitable for control, monitoring and measurement with continuous flexing cycles • As well as tools, industrial robots, conveyor belts and other continuous moving devices in the industrial environment • For bending equipment like C-tracks or other linear-flexible applications • Compatible with all common C-track versions • Very small cable diameters due to special TPE conductor insulation (HGI) according to UL standard • Reduced friction due to very smooth conductor insulation (HGI) for high mechanical loads • Low capacitance, very good electrical properties • Especially developed PVC jacket according to UL class 43 • Filler without wick effect • Low adhesion, Abrasion-resistant, Tear resistant • Hydrolysis-resistant, microbe-resistant, and rot-resistant • Use in dry or damp environment • Silicone free • RoHS-compliant AWM 2570 09.08.2014 – Subject to technical modification Part-No. A1391404 USA: LUTZE INC. 13330 South Ridge Drive • Charlotte, NC 28273, USA Tel. +1 (704) 504-0222 • Fax +1 (704) 504-0223 www.lutze.com • [email protected] United Kingdom: LÜTZE Ltd. Unit 3, Sandy Hill Park Sandy Way, Amington • GB-Tamworth, Staffs B77 4DU Tel. +44 (0)1827 31333-0 • Fax +44 (0)1827 31333-2 www.lutze.com • [email protected] page 1 of 3 Technical data sheet · LÜTZE SUPERFLEX® N (C) PVC UL For high requirements Nominal voltage Test voltage Insulation resistance Temperature range Minimum bending radius Jacket material Burning behavor Approvals Outer-∅ Weight Cu-Index Design Number of conductors/cross-section Conductor structure 600 V 80 °C 3000 V min. 100 MΩ × km moving -5 °C to +80 °C fixed -40 °C to +80 °C moving D × 10 fixed D×6 PVC Flame-retardant according to UL VW-1; DIN EN 50265-2-1, FT1 cURus AWM Style 2570 CSA AWM I/II A/B 80 °C 600 V FT1, CE UL Oil res 80 °C DIN EN 60811-2-1 11.0 approx. mm 23.1 kg/100 m 13.4 kg/100 m Jacket colour (4G2.5) Bare copper wire, finest multi-strand according to DIN VDE 0295 class 6, IEC 60228 class 6 Special TPE/HGI conductor insulation, UL certified Conductors black with white number print according to DIN EN 50334 green/yellow according to DIN EN 50334 Conductors twisted without mechanical stress, pitch layer optimised Non-woven material over the stranded cable PVC Braid from tinned copper wire, optical covering ≥ 85 % Oil-resistant PVC jacket with high load capacity according to UL class 43/VDE 0207 TM5 grey RAL 7001 General Note CE These products are in conformity with the EU Low Voltage Directive 2006/95/EC Conductor insulation Conductor labelling Ground conductor Stranding Banding Inside jacket Overall shield Outer jacket Logo 09.08.2014 – Subject to technical modification Part-No. A1391404 USA: LUTZE INC. 13330 South Ridge Drive • Charlotte, NC 28273, USA Tel. +1 (704) 504-0222 • Fax +1 (704) 504-0223 www.lutze.com • [email protected] United Kingdom: LÜTZE Ltd. Unit 3, Sandy Hill Park Sandy Way, Amington • GB-Tamworth, Staffs B77 4DU Tel. +44 (0)1827 31333-0 • Fax +44 (0)1827 31333-2 www.lutze.com • [email protected] page 2 of 3 Technical data sheet · LÜTZE SUPERFLEX® N (C) PVC UL For high requirements 09.08.2014 – Subject to technical modification Part-No. A1391404 USA: LUTZE INC. 13330 South Ridge Drive • Charlotte, NC 28273, USA Tel. +1 (704) 504-0222 • Fax +1 (704) 504-0223 www.lutze.com • [email protected] United Kingdom: LÜTZE Ltd. Unit 3, Sandy Hill Park Sandy Way, Amington • GB-Tamworth, Staffs B77 4DU Tel. +44 (0)1827 31333-0 • Fax +44 (0)1827 31333-2 www.lutze.com • [email protected] page 3 of 3
© Copyright 2025 ExpyDoc
