WS-1WCA Individual Coverall Wall Shower • Quick, Easy Installation • Completely Preassembled Wall Shower Unit Specifications Materials Shower panel is type 304 stainless steel. All other exposed parts are stainless steel or chrome-plated brass. Valve bodies are brass casting. Supply inlets are flexible stainless steel hoses. Standard Equipment Flow Control A 2.0 GPM (7.6 LPM) flow control is standard. Actual flow may vary, but will not exceed 2.5 GPM (9.5 LPM) Max. Shower Panel Constructed of 18 gauge stainless steel with stainless steel soap tray mounted to panel. Shower panel top and bottom covers are sloped, and constructed of 16 gauge stainless steel. Showerhead Standard fixed direction adjustable spray showerhead. Supply Inlets Supply inlets are flexible, stainless steel hoses with 1/2 NPT connections. Inlets are accessible through the back of the shower or through knockouts in the top and bottom covers. WS-1WCA Standard Selections (Must select one from each category) Valve Type (select one) Hot/Tempered and Cold Supplies Equa-Flo Pressure Balancing Valve EF HD Equa-Flo HD Pressure Balancing Valve TMV Thermostatic Mixing Valve HC Hot and Cold Compression Valve* Single Tempered/Cold Supply Infrared Metering Valve* ** AZ PM Presto 50B Mechanical Metering Valve AST Air Metering Valve SV Single Compression Valve TT TouchTime® Metering Valve** Optional Selections Showerhead Variations SX Severe Service Showerhead SF Deluxe Showerhead with Ball Joint ES Economy Soft Flow with Ball Joint Optional Flow Control (Not available with SF Showerhead) G 1.5 GPM Flow Control Volume Control (Not available with SX or ES Showerhead) ¨AKV ¨THV Allen Key Volume Control T-Handle Volume Control Ball Joint (Not available with SX or ES Showerhead) LBJ Lockable Ball Joint *Non-cancelable, non-returnable **AZ and TT valves require optional 24V Class 2 transformers, available as a separate item from Bradley. PT (S83-134) 24V Plug In Transformer (1/2 amp) Up to 2 showers. 4RT (S45-2045) 24V Remote Transformer (2amp) Up to 4 showers. Page 1 of 2 7/21/2014 This information is subject to change without notice. Bradley_IndividualShowers_WS-1WCA Miscellaneous SHV Vertical Shroud: Showerhead Height _______________ Floor to Ceiling Height _____________ SHH Horizontal Shroud (Per 3' Section)* RSD Recessed Soap Dish ST Stops in Supply for Valves (included with EF, HD and TMV valves) VS Vandal Resistant Screws © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com WS-1WCA Individual Coverall Wall Shower Dimensions With Optional Vertical Shroud 4" (102) 7-1/2" (191) 7-1/2" (191) 4" (102) 4" (102) *6-1/4" (159) 4" (102) (mm) 1/2" (13) Shroud Bracket Top Cap 6-3/4" (171) 8-1/2" (216) Standard Height to Floor 6'-0" Juvenile Height to Floor 5'-6" Standard Height to Floor 6'-0" Juvenile Height to Floor 5'-6" 14-1/4" (362) 32-5/8" (829) 14-1/4" (362) 31-3/4" (806) 33-1/2" (851) 34-1/4" (870) *6-1/4" (159) *6-1/4" (159) * Typical of both top and bottom cover plate mounting tab. Page 2 of 2 7/21/2014 This information is subject to change without notice. Bradley_IndividualShowers_WS-1WCA © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com
© Copyright 2024 ExpyDoc