Tuesday 2nd September 2014 Social visit to Museum De Cruquius Here we will discover documents and objects illustrating the technical evolution of the struggle against 10:30 - 13:00 water and the creation of the polders, notably models and an original steam engine from the pumping station dating from 1849. A coach will depart from the conference venue at 10.30 and will return at approximately 13:00. Technical visit to KLM Overhaul Facility KLM Engineering & Maintenance has one of the most modern and environmentally friendly engine overhaul shops in the world. In addition it is one of the largest General Electric (GE) aircraft engine overhaul shops in aircraft MRO business. A guided tour in the engine shop will show you all the latest technologies, such as; 14:30 - 16:00 EB-welding, LASER-cladding, Dabber-TIG-welding, High Energy Plasma Spraying, Closed Loop Electric Arc Spraying and much more. Transport will depart from the conference venue from 14:30, and will return at approximately 16:00. Attendees are required to bring their passport for admittance to the facility. Wednesday 3rd September 2014 Where you see the laptop symbol, we will be loading presentations 08:15 - 09:00 Registration with Refreshments in the Business Lounge 09:00 - 09:05 BHR Group Introduction 09:05 - 09:50 Key Note Address: The Sciences of Water Jet Cutting Presented by Dr. Mohamed Hashish, Flow International Corporation, USA Session 1 - Aerospace Part 1 Method for the Material-Specific Repair Preparation of Carbon Fiber Reinforced Plastic Structures 09:50 - 10:20 D Zaremba, S Wachsmuth, H J Maier, T Hassel, Leibniz Universität Hannover; P Schneider, W Hufenbach, TU Dresden, Germany Improvement of Fatigue Strength of Duralumin Plate With a Hole by a Cavitating Jet 10:20 - 10:50 H Soyama, Tohoku University, Japan 10:50 - 11:20 Water Jetting of Carbon Fibre Reinforced Polymers with Recycled Abrasive G A Escobar-Palafox , R S Gault, K Ridgway, University of Sheffield, UK Page No: 45 57 67 11:20 - 11:45 Refreshments with the Exhibitors in the Business Lounge Session 2 - Fundamentals Page No: Experimental Study on Cutting Striation by Abrasive Waterjet 11:45 - 12:15 C-W Guo, China University of Mining and Technology; D-P Zhou, Huaibei Blasting Technology Research Institute; S Jiang, J Xia, Hoojet Co. Ltd., China 13 Water Jetting in Bones: The Influence of Jet Time on Drilling Depth Variation 12:15 - 12:45 S den Dunnen, Delft University of Technology; G Tuijthof, Delft University of Technology / Academic Medical Centre, The Netherlands Kinetic Power Density in Waterjet Cutting 12:45 - 13:15 M Hashish, Flow International Corporation, USA 21 27 13:15 - 13:20 Exhibitors Presentation - OMAX Corporation 13:20 - 14:20 Lunch in the Restaurant Session 3 - Equipment Part 1 14:20 - 14:50 New Valve Technology for AWSJ Cutting M Bauer, F Eiben, Fr-W Bach, H J Maier, T Hassel, Leibniz Universität Hannover, Germany Effect of Cutting Parameters on Vertical Force in AWJ Cutting A I Hassan, Benha University, Egypt; R Kovacevic, Southern Methodist University, USA The Sign of High-End Ultra-High Pressure Water Jet Cutting Machine Development Level 15:20 - 15:50 S-X Xue, Z-W Chen, C-H Han, Q-L Ren, Hefei General Machinery Research Institute, China 14:50 - 15:20 Page No: 99 109 119 15:50 - 15:55 Exhibitors Presentation - BHDT GmbH 15:55 - 16:30 Refreshments with the Exhibitors in the Business Lounge Session 4 - Machining Part 1 Page No: 16:30 - 17:00 Roles of Abrasives in AWJ Meso-Micro Machining H - T Liu, W Sagawa, OMAX Corporation, USA 151 17:00 - 17:30 Abrasive Recovery and Recycle in AWJ and ASJ Cutting Operations R Ciccu, University of Cagliari, Italy 175 17:30 - 18:30 Welcome Reception in the Business Lounge Sponsored by BHDT GmbH Thursday 4th September 2014 08:30 - 09:00 Refreshments with the Exhibitors in the Business Lounge 09:00 - 09:45 Keynote Address: Cutting Edge Watertechnology Presented by Prof. Bert Geerken, Delft University of Technology, The Netherlands Session 5 - Machining Part 2 Page No: 09:45 - 10:15 Effect of Abrasive Water Jet Turning Parameters on Depth of Cut of AISI 1050 Steel F Kartal, Kastamonu University; H Gökkaya, Karabuk University, Turkey 189 10:15 - 10:45 Quality and Surface Integrity of Waterjet Machined Automotive Composites M Ramulu, T Briggs, University of Washington; M Hashish, Flow International Corporation, USA 197 10:45 - 11:15 Refreshments with the Exhibitors in the Business Lounge Session 6 - Cleaning and Preparation Part 1 On-line HP Water Jet Washing Robot Boosts the Efficiency of the Power Plant N Chen, W Peng, China University of Mining and Technology, China Stripping of Coatings and Prepping of Surfaces with Waterjets: Basic Considerations 11:45 - 12:15 M Vijay, A Tieu, W Yan, B Daniels, M Xu; VLN Advanced Technologies Inc., Canada 11:15 - 11:45 Page No: 241 223 12:15 - 12:20 Exhibitors Presentation - TST Sweden 12:20 - 13:20 Lunch in the Restaurant - Sponsored by TST Sweden Session 7 - Safety, Fire and Rescue Research on Hazard Range of High-Pressure Water Jet [Penetrating Injury by Abrasive 13:20 - 13:50 Jet] H Katakura, T Mita, Tokyo University of Technology, Japan Abrasive Suspension Jets – Fire, Rescue and Demolition but not Precision Machining? 13:50 - 14:20 D S Miller, Miller Innovations, UK The Design and Engineering Challenges of a Water-Abrasive Cutting and Misting System 14:20 - 14:50 for Fire Suppression P Fuller, G McNulty, BHR Group Ltd, UK Page No: 259 269 277 14:50 - 15:20 Refreshments with the Exhibitors in the Business Lounge Session 8 - Equipment Part 2 Research that Estimates Perforation Depth Opened Using Abrasive Water Jet for 15:20 - 15:50 Concrete Material by Sound Resonance Propagation Model F Inoue, Shonan Institute of Technology; T Ogawa, Y Outa, Waseda University, Japan Effect of Pressure on Abrasive Waterjet Cutting Performance 15:50 - 16:20 A Henning, P Miles, OMAX Corporation, USA 16:20 - 17:00 Live Demonstration - BHR Group Will Demonstrate Their High Pressure Water Cutting System Gala Dinner The conference dinner will be held at the highly regarded Claus Event Centre. Coaches depart from the conference venue at 18:30 and will return at 22.30. 18:30 - 22:30 Guests will be welcomed with a champagne reception, followed by a three course dinner. The dress code is smart. Attendance at the Gala dinner is included in the full delegate rate, and additional dinner tickets are available to purchase. During Dinner Presentation of the Best Paper Award Sponsored by Barton International In Memory of Janet Folkes Page No: 127 137 Friday 5th September 2014 08:30 - 09:00 Refreshments with the Exhibitors in the Business Lounge Keynote Address: Twenty Years of Experience Using the UHPW Process for Stripping Thermal 09:00 - 09:40 Spray Coatings Presented by Marcel van Wonderen, KLM Royal Dutch Airlines, The Netherlands Page No: Session 9 - Aerospace Part 2 Tensile Test Specimen Preparing Three Different Cutting Method Influence 09:40 - 10:10 on the AA 6061-T6 F Kartal, Z Yerlikaya, Kastamonu University; H Gokkaya, R Polat, Karabuk University, Turkey Abrasive Water Jet Machining (AWJ) of Hybrid Titanium/Graphite Composite Laminate: 10:10 - 10:40 Preliminary Results R Pahuja, M Ramulu, University of Washington, M Hashish, Flow International, USA 75 83 10:40 - 11:10 Refreshments with the Exhibitors in the Business Lounge Session 10 - Cleaning and Preparation Part 2 Material Removal Characteristics of an Abrasive Fan Jet S Shimizu, T Suzuki, G Peng, Nihon University, Japan Experimental Study on Resist Removal with Pure Water Jet in Air 11:40 - 12:10 Y Sugimoto, K Sato, Kanazawa Institute of Technology, Japan 11:10 - 11:40 Page No: 215 249 12:10 - 12:15 Exhibitors Presentation - The Water Jetting Association 12:15 - 13:15 Lunch in the Restaurant Page No: Session 11 - Processing Nano-Level Processing of Titanium Oxide and Platinum Co-Catalyst Particles by Cavitation to Improve the Photocatalytic Properties 13:15 - 13:45 T Yoshimura, K Shiraishi, T Takeshima, Tokyo University of Science; M Komura, T Iyoda, Tokyo Institute of Technology; K Sato, Babcock-Hitachi K. K., Japan 295 Micronization of Carbonate Copper Ore with High-Pressure Water Jet Method 13:45 - 14:15 P Borkowski, KGHM Cuprum Research & Development Centre; J Borkowski, M Bielecki, Koszalin University of Technology, Poland 305 14:15 - 14:45 The Synthesis of Waterjet Cutting with ‘Hot-Glass’ for the Creation of Murrini S Doolan, V Cutler, University of Wales Trinity Saint David; O Johnson, Royal College of Art, UK Conference Close 315
© Copyright 2024 ExpyDoc