R BEKA PRODUCT OVERVIEW INDUSTRIAL LUBRICATION revision 03/2013 BEKA 1090200384 1090200384 state: 03.13EN BEKA © BEKA 2013 All rights reserved! © BEKA 2012 All rights BAIER + KÖPPEL GmbH + Co. KG reserved!PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] Central lubrication systems Product overview Table of contents Product overview Single Line Lubrication Systems Gear pump units .................................................................................................................................. Pneumatic pump units .......................................................................................................................... Hydraulic pump units ............................................................................................................................ Manual piston pumps Proportioning valves, metering valves .................................................................................................. Metering distributor block, Metering unit ............................................................................................... Distributor strips ................................................................................................................................... Single line distributor (NV, UEN, IV) 01-1-10-05 01-1-10-07 01-1-10-08 01-1-10-09 01-1-10-10 01-1-10-11 Progressive Central Lubrication Systems Progressive distributors ........................................................................................................................ 01-1-10-12 (MX-F, MX-I, LX-2, LX-3, SX-1, SX-2, SX-3, SX-5, UX, SXE-2, SXE-2R, SXE-3, SXD, SXW-1, SXW-2) Dual Line Central Lubrication Systems Dual line distributors (BV, BW, BZ, UXZ )............................................................................................. Components for main line controlling Components for change-over monitoring 01-1-10-13 Piston pumps Oil Lubrication Pumps Series TDM .......................................................................................................................................... Series A ...................................................................................................... Series D Series C ..................................................................................................... Series OKG - electric drive ................................................................................................ Drive electro magnetic (K 407, K 412, K 442, K400, MP 2646) Drive pneumatic (P2663, P2664, P2669, P2686, PAU) ...................................................................... Drive mechanic single piston-tappet pump (EHS) or tappet pump (SP) Drive hydraulic (FAZ02142-05, FAZ02142-06) 01-1-10-14 01-1-10-15 01-1-10-16 01-1-10-17 01-1-10-18 Series FK (FKR, FKP, FKG, FKG-V, FKG-S, FKG-A) ........................................................................... Series FK and FVAM (FKGM, FKMS, FVAM) - electric drive Series PICO - electric drive ................................................................................................................... Series FK...-OC / FK...-EP - electric drive or rotating .............................................................................. Series F (F6, F-super, F-super 3) ......................................................................................................... Drive electro magnetic (MP-2643) ........................................................................................................ Drive mechanic (FHX-2, FH-2535, FHX, FHX-MX) Drive pneumatic (P-2103, PP-1) Drive hydraulic (HP-1, PH-2104, HKP-1, HPM-2, HPH-2) .................................................................... 01-1-10-19 01-1-10-20 01-1-10-21 01-1-10-22 01-1-10-23 01-1-10-24 Circulating Lubrication Systems Flow control valve, Flow limiting device, Volume flow control FXE ........................................................ 01-1-10-25 Gear pumps ......................................................................................................................................... 01-1-10-26 Internal gear pumps Special lubrication systems Barrel pumps (EFP-1, EFPM-2, HFP-3U, Qmaxx) ................................................................................ 01-1-10-27 Lubrication pinions for gears................................................................................................................... 01-1-10-28 Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 00-1-10-02 state: 03.13EN Grease Lubrication Pumps Singleline Central Lubrication Systems Product overview industrial lubrication PU-lubrication pinion for gearings and chains ......................................................................................... 01-1-10-28 Special units ......................................................................................................................................... 01-1-10-29 Oil-air units ........................................................................................................................................... 01-1-10-30 Oil-air mixing distributor Accessories 01-1-10-03 1090200384 state: 03.13EN Oil reservoir .......................................................................................................................................... 01-1-10-31 Product overview industrial lubrication Table of contents © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] Singleline Central Lubrication Systems Product overview industrial lubrication Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 01-1-10-04 state: 03.13EN Product overview industrial lubrication Table of contents Singleline Central Lubrication Systems Pump units Overview BEKA Xlube Type EA 1,5 oil 2727 EA 1,5 fluid grease 2728 BEKA Xlube 2712 Super 3 EA-tronic left Super 3 EA-tronic right Model Type Super 3 EA-tronic left Super 3 EA-tronic right Super EA-tronic with 4 l-reservoir Super EA-tronic with 6 l-reservoir Mini EA-tronic with 3 l-reservoir Mini 2 EA-tronic 1090200384 Delivery volume Oper. pressure Reservoir (l/min) max. (bar) content (l) 0,4 40 3 0,25 28 1,2 Super EA-tronic with 4 l-reservoir Reservoir material Operating voltage oil, 20 - 700 mm²/s 400 V AC / fluid grease a/t 3~ plastic, release list transparent oil, 20 - 700 mm²/s or 230 V AC fluid grease a/t release list Super EA-tronic with 6 l-reservoir Delivery volume Oper. pressure Reservoir (l/min) max. (bar) content (l) Lubricant Mini EA-tronic with 3 l-reservoir Reservoir material Mini 2 EA-tronic Lubricant Operating voltage 2805 3 2806 0,4 plastic, transparent 4 aluminium 6 steel 35 2800 3 2810 1,5 oil 20 - 700 mm²/s or fluid grease acc.to release list plastic, transparent © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK 115 V AC 230 V AC 24 V DC 115 V AC 230 V AC Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] state: 03.13EN Model 01-1-10-05 EA 1,5 Pump units Gear pump units Singleline Central Lubrication Systems Pump units Overview ES ES 2711 with 3 l-reservoir Model ES (w/o reservoir) ES 2711 with 3 l-reservoir ES 2711 with 6 l-reservoir ES 2711 with 13 l-reservoir ES 2711 with 16 l-reservoir ES 2711 with 30 l-reservoir EA 3 EA 6 state: 03.13EN Type 2710 2711 EA 3 / EA 6 with 3 l-reservoir Model 01-1-10-06 ES 2711 with 6 l-reservoir EA 3 / EA 6 (without reservoir) EA 3 / EA 6 with 3 l-reservoir EA 3 / EA 6 with 6 l-reservoir EA 3 / EA 6 with 13 l-reservoir EA 3 / EA 6 with 16 l-reservoir EA 3 / EA 6 with 30 l-reservoir 2700 2705 ES 2711 with 16 l-reservoir Delivery volume Oper. pressure Reservoir (l/min) max. (bar) content (l) 3 0,4 EA 3 / EA 6 with 6 l-reservoir Type ES 2711 with 13 l-reservoir 35 EA 3 / EA 6 with 13 l-reservoir 6 steel 13 aluminium 16 steel 30 aluminium EA 3 / EA 6 with 16 l-reservoir Delivery volume Oper. pressure Reservoir (l/min) max. (bar) content (l) - 1 or 2 Reservoir material - 3 aluminium 6 steel 35 13 aluminium 16 steel 30 aluminium Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Reservoir material aluminium ES 2711 with 30 l-reservoir Lubricant oil 20 - 700 mm²/s or fluid grease acc.to release list Operating voltage 400 V AC / 3~ EA 3 / EA 6 with 30 l-reservoir Lubricant oil 20 - 700 mm²/s Operating voltage 400 V AC / 3~ © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 Pump units Gear pump units Singleline Central Lubrication Systems Pump units Overview 2564 with 2,7 l-reservoir Model P30.2 to P50.8 2564 with 2,7 l-reservoir P30-6 with 6 l-reservoir P5.2 / P8.4 / P8.8 P5.6 / P8.6 with 6 l-reservoir P30 and P50 without reservoir P5.2 / P8.4 / P8.8 with reservoir Type Delivery volume (cm³/stroke) Pressure reduction Drive press. (bar) 2564 30 or 50 1:9 5 - 10 2563 2565 10 15 1:11 1:8 P605 without reservoir Model Type P30 and P50 (without reservoir) P605 (without reservoir) 2564 P5.1,2 and P8.1,2 with 1,2 l-reservoir PPF-1 2562 2566 2161 4-8 P5.1,2 and P8.1,2 with 1,2 l-reservoir Delivery volume (cm³/stroke) 30 or 50 Pressure reduction 1:9 3 9,5 15 10 15 50 1:32 1:12 1:8 1:11 1:8 1:5 P5.6 / P8.6 with 6 l-reservoir Reservoir content (l) 2,5 / 4,2 / 8 2,7 Reservoir material plastic, transparent 6 steel 2,5 / 4,2 / 8 6 plastic, tr. steel Lubricant oil 20 - 700 mm²/s or fluid grease acc.to release list PPF-1 with 4 l reservoir Drive press. (bar) 5 - 10 Reservoir content (l) Reservoir material - - 4-8 1,2 plastic, transparent 6 - 10 4 3-8 Lubricant Oil 20 - 700 mm²/s or fluid grease acc.to release list 01-1-10-07 1090200384 P30-6 with 6 l-reservoir state: 03.13EN P30.2 to P50.8 with reservoir Pump units Pneumatic pump units © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] Singleline Central Lubrication Systems Pump units Overview Pump units Hydraulic pump units PH1/ PH6/ PH10 without reservoir Model PH1 PH6 PH10 without reservoir PH1-6 PH6-6 PH10-6 with 6 l-reservoir PH1-6 / PH6-6 / PH10-6 with 6 l-reservoir Type 2577 Delivery volume (cm³/stroke) 1 6 10 Pressure reduction 1:2 1 6 10 1:2 Operating press. (bar) Relief press. Reservoir Reservoir (bar) content (l) material max. 55 2578 - - 6 steel 1:1 1-2 1:1 Lubric. oil 20 - 700 mm²/s or fluid gre. acc.to release list Manual piston pumps Manual pump 2532 Manual pump 2533 Type 2532 2533 Delivery volume (cm³/stroke) 6 / 10 / 15 6 / 10 Operating Reservoir press. (bar) content (l) 30 1,2 Reservoir material plastic, transparent Lubricant oil, 20 - 700 mm²/s or fluid grease acc.to release list 01-1-10-08 state: 03.13EN Model Manual pump 2533 Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 Manual pump 2532 Singleline Central Lubrication Systems Metering elements Overview Size 1 with bolted connection for pipe Ø 4 Model Z31ZV1 Z31ZV2 Z31ZV3 Z31ZV5 Z31ZV10 Z31ZV15 Z31ZV20 Z31ZV40 Z31ZV50 Z31ZV60 Z31ZV100 Size 1 with bolted connection for pipe Ø 6 Meter. volume (mm³/stroke) 10 20 30 50 100 150 200 400 500 600 1000 Size 1 2 Size 1 with plug connection for PA pipes Type / Connection type Size 1 with plug connection for PA-pipes with chamfer Relief press. (bar) 4036 / 4036 / plug-type plug-type connection connection 4030 / for for PA pipes bolted PA-pipes and connection chamfers Operating Metering press. (bar) medium max. 1 15 - 40 3 Metering elements Metering valves (dynamic system) oil 50 - 700 mm²/s or fluid grease acc.to Freigabeliste Metering valves (static system) 1090200384 Z31DV3 Z31DV5 Z31DV10 Z31DV15 Z31DV20 Z31DDV3 Z31DDV6 Z31DDV10 Z31DDV16 Metering volume (mm³/stroke) 30 50 100 150 200 30 60 100 160 Type Z31DV.. with elbow plug connection Relief press. max. (bar) Connection type - 4031 4032 Bolted connection Plug-type conn. for polyamide pipes - elbow plug-type conn. for polyamide pipes - Bolted connection Plug-type conn. 4 1 Operating Material Metering press. medium (bar) steel oil or 20 - 700 mm²/s 15 - 40 V2A or fluid grease (1.4305) acc.to release list 12 - 40 © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK steel oil 20 - 700 mm²/s state: 03.13EN Model Z31DV.. / Z31DDV.. with plug connection 01-1-10-09 Z31DV.. / Z31DDV.. with bolted connection Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] Singleline Central Lubrication Systems Metering elements Overview Metering elements Metering distributor blocks Size 1 4018 Bolted connection Size 1 2 3 Size 2 40181 Plug connection Meter.volume (mm³/stroke) 10 30 60 100 160 100 200 300 400 600 200 400 600 1000 1500 Type Connection type 4180 Bolted connection Number of lube points 4181 Plug connection Connections main lube line line Size 3 41823 41841 Bolted connection Plug connection Relief Operating press. max. press. (bar) (bar) Metering medium 4018 Bolted connection M10x1 40181 Plug-type connection 4180 Bolted connection 3 12 - 50 1 to 10 M12x1 4181 Plug-type connection 41820/ 41823/ 41824 Bolted connection M8x1 pipe Ø 4 mm 4 16 - 50 oil 10 - 1000 mm²/s or fluid grease acc.to release list M12x1 or G 1/8 1 to 3 41840/ 41841/ 41842 Plug-type connection Design A Design A B C D E (pivotable) F (pivotable) Design B Version G L T W LS TS Design C Meter. volume (mm³/stroke) Type Connection type 30 60 100 4176 Bolted connection 4174 Relief press. (bar) Operating press. (bar) max. 1 max. 35 Plug-type conn. Ø 4 mm for polyamide pipes Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Design D Metering medium oil 40 - 250 mm²/s fluid grease n. release list oil 40 - 250 mm²/s © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 01-1-10-10 state: 03.13EN Metering units for direct lubrication point connection (static system) Singleline Central Lubrication Systems Metering elements Overview Size 1 Z32VL3 or Z33VL6 Size Size 1 Z32VL4 or Z33VL8 Model Outlets Z32VL1 - Z32VL12 Z33VL2 - Z33VL24 Z32VL1/2 - Z32VL10/2 Z33VL2/2 - Z33VL20/2 Size 1 Z32VL5 or Z33VL10 Type one-sided Number of outlets 1 to 12 two-sided one-sided two-sided 2x1 to 2x12 1 to 10 2x1 to 2x10 4020 1 2 Connection inlets with or without union nut (M10x1, pipe-Ø 6, with olive Connection Material outlets M8x1 steel, galv. M10x1 or 1.4305 steel, M10x1 galvanized Metering elements Distributor blocks Single line distributor 4020 45 1 to 6* M16x1,5 M8x1 4124 300 1 to 12** G 1/4 M10x1 NV UEN 4126 120 1 to 15 Inlet Outlet connection connections M10x1 G 3/8 NPT 3/8” G 3/4 IV-11 NPT 3/4” * no. of outlets can be enlarged when combining ** no. of outlet can be enlarged by a connection element 4125 240 1 to 6 M8x1 G 1/8 NPT 1/8” G 1/4 NPT 1/4” Material Housing: GD-Zn additional part: brass IV-11 / IV-1 2-outlets Metering vol. optional (mm³ / stroke and outlet) 100 - 1000 25 - 400 steel, ZnNicoating acc. to DIN 50979 steel, galvanized 16 - 50 200 - 1200 adjustable 1000 - 11000 adjustable © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Metering medium oils; fluid grease NLGI 000, 00 fluid grease; grease up to NLGI 2 oil; fluid grease NLGI 000, 00 fluid grease, grease up to NLGI Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] state: 03.13EN Number of outlets Type IV-1 1090200384 GVO-1 Operating pressure max. (bar) Model GVO-1 UEN 01-1-10-11 NV-6 Progressive Central Lubrication Systems Progressive distributors Overview MX-F MX-I SX-1 LX-2 SX-2 Model Type MX-F MX-I LX-2 LX-3 4010 3979 3972 3973 SX-1 SX-2 SX-3 SX-5 UX 4000 3989 4008 3983 4005 SX-3 Number of rev. Operat. max. press. (revol./min) max. (bar) 180 60 180 60 300 180 No. of outlets max. SX-5 Inlet Outlet connection connection 24 16 M10x1 250 G 1/8 G 1/8 G 3/8 G 1/2 G 1/4 G 3/8 Segment construction Model Type SXE-2 SXE-2R SXE-3 SXD SXW-1 SXW-2 4003 3971 3985 3998 3977 3978 SXE-3 SXD No. of revol. Oper. No. of max. press. outlets (revol./min) max. max. (bar) G 1/4 G 3/8 200 150 20 G 1/4 G 1/2 G 1/8 M11x1 G 1/4 G 3/8 G 1/4 G 3/8 Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK steel, galv. 1.4404 steel, ZnNi 1.4404 1.4401 steel, galv. 1.4301 steel, galv. Metering vol. optional (mm³ /stroke and outlet) 25 - 105 45 - 105 200 68 - 430 Metermedium oils and greases up to NLGI-cl. 2 75 - 470 1130 - 2000 SXW-1 Inlet Outlet connection connection 300 180 Material UX Sandwich construction 01-1-10-12 state: 03.13EN SXE-2 / SXE-2R (with return) M10x1 20 60 180 LX-3 Material SXW-2 Meterin vol. optional (mm³ / stroke and outlet) steel, galvanized 100 - 760 steel, galv., connec. plate. aluminium 100 - 900 900 - 3700 Metering medium oils and greases up to NLGI 2 © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 Progressive distributors Disk construction Dualline Central Lubrication Systems Dual line components Overview BW Model Type BV BW BZ 3981 3980 4001 Operating pressure max. (bar) 300 (min. 35) 400 No. of outlets max. BZ Connection Connection inlet outlet G 1/4 8 G 1/4 G 3/8 UXZ 4006 150 UXZ 20 G 3/8 Material steel, galvanized steel, galvaniz. or 1.4305 steel, galvaniz. Metering volume optional (mm³ / stroke and outlet) 70 - 300 300 - 1500 250 - 3000 (regelbar) 1130 - 2000 For controlling the main line 4/2-way control valve For controlling the changeover Pressure changeover switch Differentiall press. control device electrical Operating pressure (bar) 400 Flow volume (l/min) 8 electro-pneumatic hydraulical 350 150 / 300 20 8 Connection main line G 1/2 G 3/4 G 3/8 G 1/4 electrical 400 - G 3/8 Component Type Actuation 4/3-waycontrol valve 4340 4/2-waycontrol valve Pressure changeover switch Differential pressure control device electron. press. sensor 4065 0421 Oils and greases up to NLGI-cl. 2 Material electronic press. sensor Lubricant GG-25 steel, galvanized 4305 0421 oils and greases up to NLGI-Cl. 2 - 01-1-10-13 1090200384 4/3-way control valve Metering medium state: 03.13EN BV Dual line components Dual line distributors © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] Multiline Central Lubrication Systems Oil lubrication pumps Overview TDM-FSU Model TDM-FSU TDM-FSU-M TDM-FS 4 TDM-FS 4-M TDM-FS 4 Type 2200 2201 2204 2205 No. of outlets state: 03.13EN Type TDM 2 rotating TDM 2-M electric TDM 4 rotating TDM 4-M electric TDM 8 rotating TDM 8-M electric TDM-M with motor 2210 Input speed max. (rev / min) Operating pressure max. (bar) Suction height max. (mm) 0,1 33:1 300 - 1800 3 300 3-4 TDM 4 Model Ratio 1-2 TDM 2 01-1-10-14 Delivery volume adjustable, max. (cm³ / stroke and outlet) No. of outlets TDM 8 Delivery volume adjustable, max. (cm³ / stroke and outlet) Ratio TDM 4-M 230/400 V AC / 3~ Input speed max. (rev / min) Operating pressure max. (bar) Suction height max. (mm) 500 - 3000 3/5 300 1-2 2211 71,5:1 - 428:1 2212 3-4 0,039 - 0,088 2213 2214 5-8 92:1 - 1050:1 2215 Power requirement: 0,09 / 0,11 kW; available for all pumps of series TDM, see TDM-FSU-M, TDM-FS 4-M, TDM 2-M, TDM 4-M, TDM 8-M Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 Oil lubrication pumps Series TDM Multiline Central Lubrication Systems Oil lubrication pumps Overview AZU Model AZU rotating AZP oscillating AF rotating AFG rotating AFG-M elektrisch APG-M electric AZP Type Outlets max. AF AFG Delivery volume adjustable, max. (cm³ / stroke and outlet) 2240 AFG-M 400 V AC / 3~ Reduction 8:1 / 16:1 25:1 / 50:1 1:1 2242 2244 12 18:1 / 25:1 / 36:1 80:1 / 160:1 / 320:1 / 640:1 50:1 / 80:1 / 160:1 / 320:1 / 640:1 400:1 / 288:1 0,06 2248 2250 2243 Input speed max. (rev / min) 200 / 400 600 / 1300 40 APG-M DC Operating pressure max. (bar) Suction height max. (mm) 10 500 500 / 600 / 1400 2400 2800 1500 / 1800 Oil lubrication pumps Series A - drive see table 2900 / 3000 Series D - drive see table 1090200384 DU rotating DP oscillating DG rotating DFG rotating DFG-M electric Type DG Outlets max. Delivery volume adjustable, max. (cm³ / stroke and outlet) DFG Reduction DFG-M 400 V AC / 3~ Input speed max. (U / min) 500 - 750 2260 12:1 / 18:1 / 36:1 2262 2:1 80 80:1 / 160:1 / 320:1 / 640:1 160:1 / 320:1 / 640:1 2500 80:1 / 160:1 / 320:1 / 640:1 Power demand 0,25 kW 2266 12 2268 2270 0,15 Operating pressure max. (bar) Suction height max. (mm) 50 1000 2500 © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] state: 03.13EN Model DP 01-1-10-15 DU Multiline Central Lubrication Systems Oil lubrication pumps Overview C 1,5 oscillating CS 3 rotating CCS 3 rotating Model Drive rotating oscillating rotating CS 1,5 oscillating rotating C3 oscillating rotating CS 3 oscillating rotating CC 3 oscillating rotating CCS 3 oscillating rotating CC 6 oscillating rotating CCS 6 oscillating rotating CC 30 oscillating oscillating CCS 30 rotating CC 30 M w. motor CCS 30 M w. motor Type 2300 2301 2302 2303 2310 2311 2312 2313 2320 2321 2322 2323 2340 2341 2342 2343 2360 2361 2362 2363 2364 2368 CC 30 rotating Out- Deliv. volume Res. lets adjustable, max. capa(cm³ / stroke max. city and outlet) (l) 12 6 1,8 3 12 6 24 12 0,15 24 3 6 12 48 24 30 48 24 CCS 30 oscillating Input speed max. (rev / min) Reduction 12/18/36 or 72:1 1:1 / 3,15:1 12/18/36 or 72:1 1:1 / 3,15:1 12/18/36 or 72:1 1:1 / 3,15:1 12/18/36 or 72:1 1:1 / 3,15:1 12/18/36 or 72:1 1:1 / 3,15:1 12/18/36 or 72:1 1:1 / 3,15:1 12/18/36 or 72:1 1:1 / 3,15:1 12/18/36 or 72:1 1:1 / 3,15:1 12/18/36 or 72:1 1:1 / 3,15:1 1:1 / 3,15:1 12/18/36 or 72:1 80/120/180/240/ 360 oder 720:1 500/ 750/ 1400/ 2600 40 / 125 500/ 750/ 1400/ 2600 40 / 125 500/ 750/ 1400/ 2600 40 / 125 500/ 750/ 1400/ 2600 40 /125 500/ 750/ 1400/ 2600 40 / 125 500/ 750/ 1400/ 2600 40 / 125 500/ 750/ 1400/ 2600 40 / 125 500/ 750/ 1400/ 2600 40 / 125 500/ 750/ 1400/ 2600 40 / 125 40 / 125 500/ 750/ 1400/ 2600 1500/ 1800 Operating pressure max. (bar) 50 01-1-10-16 state: 03.13EN C 1,5 CCS 6 oscillating CS 3 oscillating Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 Oil lubrication pumps Series C - drive see table Multiline Central Lubrication Systems Oil lubrication pumps Overview OKGGM-OC DC Model OKGGM-OC OKGGM-OC with PSU OKGGM-OC with PSU, 115 or 230 V AC Type Outlets max. OKGM-OC 400 V AC / 3~ Delivery Reser. volume content max. (kg) (cm³ / stroke and outlet) OKGGM-EP DC OKGM-EP 400 V AC / 3~ Input speed motor / shaft (rev. / min) Pump speed 1 rev. = 1 stroke (rev. / min) - - 15 80:1 / 150:1 / 300:1 / 400:1 / 600:1 / 1200:1 1350 at 50 Hz 1600 at 60 Hz Reduction Press. Operating max. voltage (bar) 2035 0,005 0,010 0,015 0,025 0,050 2029 21 OKGM-OC 2017 OKGGM-EP 2040 OKGGM-EP with PSU 2038 200 2,5 4,2 8,0 3 OKGM-EP OKGGM-EP with PSU, 115 or 230 V AC 2011 0,06 0,12 0,17 - - 15 350** (80:1)* / 150:1 / 1350 at 50 Hz 300:1 / 400:1 / 1600 at 60 Hz 600:1 / 1200:1 6 - Oil lubrication pumps Series OKG - electric drive 12 V DC 24 V DC 115 V AC 230 V AC 400 V AC / 3~ 12 V DC 24 V DC 115 V AC 230 V AC 400 V AC / 3~ * Special request after consultation ** Pressure limiting valve adjusted to 280 bar, = power supply unit Model K-412 Type K-407 K-412 K-442 2652 2653 2640 K-400 2654 2641 2646 Outlets K-442 Delivery volume max. (cm³ / stroke and outlet) 1090200384 1-6 MP-2646 K-400 or MP-2646 Reservoir capacity (l) 0,75 1,2 4,2 0,040 0,100 without reservoir Reservoir material plastic Duty ratio Operating voltage plastic, transparent 40 % 24 V DC 25 % 230 V AC 24 V DC 180 V DC - © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 01-1-10-17 K-407 state: 03.13EN Electro magnetic drive Multiline Central Lubrication Systems Oil lubrication pumps Overview Oil lubrication pumps Pneumatic drive P2663 Model P2669 Type P-2663 P-2664 P-2669 P-2686 2663 2664 2669 2686 PAU 2685 Outlets max. Delivery volume max. (cm³ / stroke and outlet) 0,025 5 0,010 0,005 - 0,015 0,025 - 0,050 10 4 1 Reservoir content (l) 0,5 1,2 0,5 - Reservoir material Pressure ratio plastic 1:20 - 1:84 1:47 1:20 Drive press. (bar) 6 - 10 Mechanic drive EHS 0,6 / EHS 0,15 S55 Model EHS 0,6 EHS 0,15 S55 SP 0,56 SP 1,12 Type 2140 2141 2605 Outlets max. 4 Delivery volume max. (cm³ / stroke and outlet) 0,15 Operating press. max. (bar) 12 Suct. height max. (mm) 300 1 0,56 1,12 80 - state: 03.13EN Hydraulic drive Model FAZ02142-05 FAZ02142-06 FAZ02142-06 Type 2122 Outlets max. 10 1 Delivery volume max. (cm³/stroke and outlet) 2 / 3 / 4,5 / 6 / 7,5 6 Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Operating pressure Drive pressure max. (bar) (bar) 200 60 - 200 © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 01-1-10-18 FAZ02142-05 Multiline Central Lubrication Systems Grease lubrication pumps Overview FKR rotating FKP oscillating Model type FKR rotating FKP oscillating FKG rotating vertical 2000 FKG rotating vertical FKG-V rotating pivotable by 90° Delivery volume Reser. Outlets adjustable, max. capacity max. (cm³ / stroke and outlet) (kg) 2001 2002 12 0,1 2004 FKG-V rotating pivotable by 90° FKG-S rotating vertical FKG-A rotating vertical 1 1,5 2 4 2005 2006 8 FKG-S rotating vertical FKG-A rotating vertical Press. max. (bar) Reduction Input speed (rev / min) 14:1 / 19:1 / 28:1 / 57:1 3,5:1 min.: 28/38/56/114 max.: 210/300/430/850 35 84:1 / 150:1 / 300:1 / 400:1 / 600:1 / 1200:1 Grease lubrication pumps Series FK - drive see table 50 84:1 / 150:1 / 300:1 / 400:1 / 600:1 / 1200:1 300 - 2800 300:1 / 450:1 / 900:1 FKMS with motor Model Type FKGM with motor FKMS with motor FVAM with motor 2007 Outlets max. Delivery volume adjustable, max. (cm³/h and outlet) 12 0,1 8 0,15 2008 2030 FVAM with motor Reservoir capacity Reduction (kg) 1 84:1 / 150:1 / 1,5 300:1 / 400:1 / 2 600:1 / 1200:1 4 1 / 1,5 / 420:1 / 560:1 / 2 / 4 / 10 750:1 Input Operating speed press. max. (rev / min) (bar) 1420 at 50 Hz 50 1700 at 60 Hz © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK 100 Operating voltage 230 / 400 V AC / 3~ 400 V AC / 3~ 230 / 400 V AC / 3~ Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 01-1-10-19 1090200384 FKGM with motor state: 03.13EN Series FK and FVAM - electric drive Multiline Central Lubrication Systems Grease lubrication pumps Overview Grease lubrication pumps PICO - electric drive Model 2185 OutDeliv. volume Reservoir lets max. (cm³ / stroke content System max. and outlet) (kg) type 0,005 / 0,010 / 8 0,015 / 0,025 / 1,2 multi line 0,05 2 0,12 progressive Pump speed 1 rev. = 1 stroke (rev. / min) 15 Operating Operating press. max. voltage (bar) 200 12 V DC 24 V DC 280 Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 01-1-10-20 state: 03.13EN PICO Type Multiline Central Lubrication Systems Grease lubrication pumps Overview FKGM-EP 400 V AC / 3~ FKGM-OC FKGGM-EP 2018 FKGGM-OC FKGGM-OC with PSU FKGGM-EP DC FKGM-EP with norm motor, 400 V AC / 3~ Delivering Outlets volume Type max. max. (cm³ / stroke and outlet) 2154 0,005 2024 0,010 21 0,015 0,025 2016 0,050 Model 2037 FKGGM-EP with PSU FKGGM-EPC 2036 with control 2013 FKGM-EP FKGM-EP with norm motor 2014 FKG-EP with flange 56 C acc. to NEMA rotating 2015 FKR-EP rotating 1090200384 FKGM-OC 400 V AC / 3~ Reser. capacity (kg) FKGGM-EP with PSU, 115 or 230 V AC FKG-EP rotating, with flange 56 C acc. to NEMA (USA) Reduction Input speed motor / shaft (rev / min) - - 80:1 / 150:1 / 300:1 / 400:1 / 600:1 / 1200:1 1350 at 50 Hz 1600 at 60 Hz 1,9 2,5 4,2 8,0 - 6 8 No. of pump rev. 1 rev. = 1 stroke (rev / min) Press. Operating max. voltage (bar) 15 1,9 2,5 4,2 8,0 - steel) - - - min. 1 max. 25 12 V DC 24 V DC 115 V AC 230 V AC 400 V AC / 3~ 12 V DC 24 V DC 115 V AC 230 V AC 100 V bis 250 V AC 15 1350 at 50 Hz 1600 at 60 Hz (80:1)* / 150:1 / 1500 at 50 Hz 300:1 / 400:1 / 1800 at 60 Hz 600:1 / 1200:1 (2 / 4 7 FKR-EP rotating 200 3 0,06 0,12 0,17 FKGGM-EPC with control, 100 to 250 V AC 350** 400 V AC / 3~ - 14:1 / 19:1 / 28:1 / 57:1 * special requests after consultation ** Pressure limiting valve adjusted to max. 280 bar © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ state: 03.13EN FKGGM-OC with PSU, 115 or 230 V AC 01-1-10-21 FKGGM-OC DC Grease lubrication pumps Series FK...-OC / FK...-EP - electric or rotating drive TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] Multiline Central Lubrication Systems Grease lubrication pumps Overview Grease lubrication pumps Series F - drive see table F6 rotating Model F6 rotating F6 w. geared motor F-super w. geared motor F6 with geared motor Type Outlets max. F-super with geared motor Delivery Reserv. volume content (kg) max. (cm³ / stroke and outlet) 2032 5 7,5 10 20 2034 0,06 0,12 0,17 2050 21 5 10 20 48 100 2051 2052 2053 2054 2055 3 (4= Special version 9:1 / 18:1 / 25:1 / 36:1 / 50:1 135:1 / 270:1 / 375:1 / 450:1 / 540:1 / 600:1 / 750:1 / 900:1 / 1250:1/1800:1/ 2500:1 88:1 / 165:1 / 280:1 / 410:1 / 600:1 / 800:1 / 1000:1 15:1 / 22,5:1 / 45:1 2,5:1 46:1 F-super 3 with geared motor Input speed motor / shaft (rev. / min) - F-super 3 oscillating Pump speed Press. Operating 1 rev. = max. voltage (bar) 1 stroke (rev. / min) min. 1 max. 25 - 2800 at 50 Hz 3300 at 60 Hz - 250 230 / 400 V AC / 3~ 1420 at 50 Hz 1700 at 60 Hz - min. 1 max. 25 - 1420 at 50 Hz 1700 at 60 Hz - 230 / 400 V AC / 3~ - min. 1 max. 25 0,56 400 15:1 / 22,5:1 / 45:1 2,5:1 - Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 01-1-10-22 state: 03.13EN F-super rotating oscillating F-super 3 w. geared motor F-super 3 rotating oscillating Reduction F-super rotating Multiline Central Lubrication Systems Grease lubrication pumps Overview Model MP-2643 Type 2643 Outlets max. 1-6 Delivery volume max. (cm³ / stroke and outlet) 0,015 / 0,025 / 0,035 Reservoir content (l) 0,4 Reservoir material plastic, transparent Duty ratio 25 % Operating voltage 24 V DC Grease lubrication pumps Electro-magnetic Mechanic drive FHX-2 FH-2535 Model Type Outlets FHX-2 2534 1 FH-2535 2535 1 FHX FHX-MX (w. progre. distributor MX-F) 2081 1 FHX FHX-MX with MX Delivery volume max. (cm³ / stroke) 1,5 3 1,5 3 Reserv. content (l) 1,2 2 0,4 (kg) Reservoir material plastic, transparent steel 1 / 1,5 / 2 / 3 / 4 (kg) Pressure max. (bar) 300 150 300 150 400 300 cartridge Model Type P-2103 2103 PP-1 2153 * pressure limiting valve adjusted to 280 bar ** at drive pressure 8 bar PP-1 Out- Delivery volume Reservoir lets max. (cm³ / stroke content max. and outlet) (kg) 2 1,2 1 4 6 1 / 1,5 / 2 / 3 / 4 1,9 / 2,5 / 3 0,06 - 0,17 4,2 / 8 2/4 Reservoir material plastic, transparent steel plastic, transparent steel Drive Pressure ratio 1:32 1:18 1:10 250** 140** 80** 4-8 - 350* 6 - 10 © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Drive pressure (bar) Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 01-1-10-23 1090200384 P2103 state: 03.13EN Pneumatic pumps Multiline Central Lubrication Systems Grease lubrication pumps Overview Grease lubrication pumps Hydraulic drive HP-1 Model PH-2104 HKP-1 Type Outlets HP-1 2163 1-6 Delivery vol. (cm³/stroke and outlet) 0,06 - 0,17 PH-2104 2104 1 1/2/3/4/6 HKP-1 HPM-2 HPH-2 2120 2574 2574 2 1 1 0,2 - 2,0 0,1 - 1,0 Reservoir content (kg) 1,9 / 2,5 / 4 / 8 2/4 1,2 1 / 1,5 / 2 / 3 / 4 2,5 0,4 HPM-2 Reservoir material plastic, transparent steel plastic, transparent steel plastic, transparent cartridge HPH-2 Operating press. max. (bar) 350* Drive pressure (bar) 30** - 250 280* 25 - 160 (min. 60) - 250 100 - 220 250 - 350 85 - 275 130 - 250 ab 100 Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 01-1-10-24 state: 03.13EN * pressure limiting valve adjusted to 280 bar ** min. drive pressure depends on counterpressure of lubrication system Circulating Lubrication Systems Accessories Overview Type 4060 Operating pressure (bar) 10 - 250 Pressure drop (bar) 7 Volume flow (l/min) 0,1 - 8 Material Weight (kg) 1,65 steel Lubricant Zubehör Flow control valve oils 10 - 1000 mm²/s Flow limiting device Type 4365 Operating pressure (bar) 5 - 200 (without add-ons) Pressure drop (bar) ³5 Volume Material flow (l/min) 1,15 - 3,00 steel (dep. on oriffice disc-Ø) Weight (kg) 0,39 Lubricant oils ON synt. a. mineral. basis 20 - 600 mm²/s Type 1090200384 FXE 250 with conn. plate without conn. plate 4063 4064 Oper. pressure max. (bar) 250 Volume flow (l/min) 0,05 - 12 Meßvolume (cm³) 1,2 Material steel (cover Al) Weight (kg) 0,7 + 0,85 © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Lubricant Oils 20 - 1000 mm²/s Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 01-1-10-25 Model state: 03.13EN Volume flow control Circulating Lubrication Systems Gear pumps Overview Zahnradpumps Gear pumps Flange pumps Foot pump Series Motor pumps horizontal Pump type FL 0,5 MZ 0,5 MZE 0,5 FL 0 MZ 0 FL 1 to 5 U 1 to 5 MZN 1 to 5 MZE 1 to 5 Motor pumps vertical Delivery volume (l/min) Operating pressure max. (bar) 0,06 - 3,00 35 0,25 - 2,40 50 1 - 65 30 flange pumps motor pumps, horizontal motor pumps, vertical flange pumps motor pumps, vertical flange pumps foot pumps motor pumps, horizontal motor pumps, vertical Internal gear pumps FLI and UI Connections radial FLIS and UIS Connections at front MZIR Connections radial MZI Connections at front MZIR Pump type MZI Delivery volume (l/min) Operating pressure max. (bar) 4 - 32 100 Flange and foot pumps Motor pumps 01-1-10-26 state: 03.13EN Series FLIS and UIS Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 FLI and UI Special Lubrication Systems Barrel pumps EFP-1 Model EFP-1 EFPM-2 HFP-3U with or without pump cover, follower piston, level sensor Qmaxx 2 EFPM-2 Type HFP-3U (complete) HFP-3U Qmaxx 2 (w/o pump cover, with hoist w/o follower piston, with hand crank w/o visual level sensor) Drive Delivery vol. max. (cm³ / stroke) electric 0,33 Barrel size (kg) 2196 Qmaxx with electric hoist Operating voltage 24 V DC 20 / 25 / 50 / 200 hydraulic 26 2179 hydraulic 9000 (cm³/min) 3000 / 9000 (cm³/min) 26 Qmaxx 2187 electric PFP-...-U 2690 pneumatic Drive pressure (bar) / -volume (l/min) - Operat. press. max. (bar) 300* 2197 2198 PFP-...-U Barrel pumps, Lubrication pinion Overview 115 V AC 230/400 V AC/3~ 35 bis 60 / max. 4,5 - 200 400/500 V AC/3~ 20 / 25 / 50 / 200 - - max. 100 / max. 40 4-6/ max. 134 350** 100 300* 01-1-10-27 1090200384 state: 03.13EN * pressure limiting valve adjusted to max. 280 bar ** pressure limiting valve adjusted to max. 300 bar © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] Special Lubrication Systems Lubrication pinion Overview Segmented Lubrication pinion PU-lube pinion PU-lube pinion lubrication pin. for gears for gears for chains Special units for gears Material lubrication pinion Segmented lubrication pinion for gears Aluminium, plastic Lubrication pinion for gears Aluminium PU-lube pinion for gears Polyurethane-foam open celled PU-lube pinion for chains Polyurethane-foam open celled retainer, shaft: steel Halter, Welle: Stahl grease up to NLGI 2 -20 to +70 °C grease up to NLGI 2 -20 to +70 °C axis: steel galvanized or stainless steel oils and greases up to NLGI 2 -30 to +150 °C axis: steel galvanized or stainless steel oils and greases up to NLGI 2 -30 to +150 °C segmented one part two parts three parts four parts gears: straight sloping right sloping left Simplex Duplex Triplex Lubricant Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 01-1-10-28 state: 03.13EN Operating temperature Version Special Lubrication Systems Special units Overview 01-1-10-29 1090200384 state: 03.13EN Oil - air unit and mixing distributor BEKA manufactures lubrication- and hydraulic units according to customer’s request. Planning and construction are done according to the customer’s specifications. Pictures are exemplary © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] Special lubrication units Oil air units and mixing distributors Overview Accessories Oil - air units Pictures are in process Drawing Type No. of lubrication points Metering volume (mm³ / stroke) FAZ03512_00 FAZ03519_00 FAZ03692_00 4086 1-6 30 / 60 / 100 / 160 Operating voltage 115 V AC 230 V AC Oil - air mixing distributor FAZ02751_01 Type FAZ04057_01 4299 FAZ01822_02 4089 FAZ04185_01 FAZ02751_01 FAZ03088_00 4092 4283 4089 No. of Metering Operating press. (bar)Connection Connection Press. connection lubrication volume Metering Sprayed Metering Sprayed oil - air mixture points (mm³ / stroke) medium air medium air 2/4/6/8 10 / 20 / 10 - 50 3-6 M10x1 M10x1 pipe Ø 4 30 / 50 (plug-type conn.) 1-6 30 / 60 / 10 - 50 1 - 10 G 1/8 G 1/4 pipe Ø 4 or Ø 6 100 / 160 2-5 30 / 60 / 100 12 - 50 4-8 M10x1 G 1/4 M10x1 2 - 10 50 max. 50 1-5 M10x1 M10x1 pipe Ø 2,5 or Ø 4 1-6 30 / 60 / 10 - 50 1 - 10 G 1/8 G 1/4 pipe Ø 4 or Ø 6 100 / 160 (plug-type conn.) Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 Drawing 01-1-10-30 state: 03.13EN FAZ01822_02 Accessories Overview FAZ03455_00 FAZ01918_03 Model FAZ03433_02 Type FAZ03455_00 FAZ01918_03 FAZ03433_02 FAZ03433_00 FAZ03532_00 FAZ03433_00 Reservoir content (l) 2,5 1,2 4,2 2 4 Reservoir material PA PE PA 01-1-10-31 1090200384 state: 03.13EN 0457 FAZ03532_00 Accessories Oil reservoir © BEKA 2013 All rights reserved! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK Subject to alterations! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] AUSTRIA BEKA-Lube GmbH Carola-Blome-Str. 7 5020 Salzburg fon +43 / 662 / 43 84 40 fax +43 / 662 / 43 84 403 e-mail [email protected] CHINA EAST TSANHAIR COMPANY LTD. 7A Building, Medicine Valley No.1, No.9 Tianfu Street, Bio-Medicine Park, Zhongguancun Science Park, Daxing District, Beijing, China 102600 fon +86 / 10 / 83 681 526 fax +86 / 10 / 83 681 520 e-mail [email protected] KOREA BEKA AHWON 326-1 Danggung Dong Gunpo Si Kyungki Do Korea fon +82 / 31 / 451 / 0628 fax +82 / 31 / 451 / 0974 e-mail [email protected] TURKEY BEKAMAKS MAKINA SANAYI ve TICARET LTD. STI. Kucukyali Ticaret Merkezi B Blok No. 7 Girne Mah. 34852 Maltepe / Istanbul fon +90 / 216 / 367 34 00 fax +90 / 216 / 367 33 85 e-mail [email protected] BELGIUM BEKA LUBE N.V.S.A. Demerstraat 32 BE 3200 Aarschot fon +32 / 16 / 64 09 26 fax +32 / 16 / 64 05 48 e-mail [email protected] FRANCE BEKALUBE FRANCE 4, bis Rue de l’Artisanat 89100 Paron fon +33 / 386 / 83 39 06 fax +33 / 386 / 65 52 24 e-mail [email protected] NETHERLANDS BEKA NEDERLAND B.V. Wagenmakerij 11 4762 AV Zevenbergen fon +31 / 168 / 37 15 38 fax +31 / 168 / 33 83 29 e-mail [email protected] USA BEKA-MAX of America 2600 North America Drive Suite 8 P.O. Box 615 West Seneca, NY 14224 fon +1 / 905 / 821 / 1050 fax +1 / 905 / 858 / 05 97 e-mail [email protected] CANADA BEKA-LUBE Products Inc. 2830 Argentia Road, Unit 9 Mississauga ON L5N 8G4 fon +1 / 905 / 821 / 1050 fax +1 / 905 / 858 / 0597 e-mail [email protected] ITALY BEKALUBE s.r.l. Via Rossi 152 20043 Arcore fon +39 / 039 / 618 00 88 fax +39 / 039 / 61 75 23 e-mail [email protected] SPAIN BEKA-LUBE IBERICA S.L. Avda. de Suiza, 3 P.A.L. Coslada 28820 Coslada (Madrid) fon +34 / 91 / 670 7800 fax +34 / 91 / 670 78413 e-mail [email protected] Subsidiaries Argentinia Australia Belarus Bosnia Brazil Croatia Czechia Denmark Estonia Finland Great Britain Greece Hong Kong Hungaria India Indonesia Iceland Ireland Japan Latvia Lithuania Luxemburg Malaysia New Zealand Norway Poland Portugal Russia Serbia Slovakia Slovenia South Africa Sweden Switzerland and others Subject to alterations! BAIER + KÖPPEL GmbH + Co. KG PRÄZISIONSAPPARATEFABRIK © BEKA 2013 All rights reserved! BEETHOVENSTR. 14 D-91257 PEGNITZ POSTFACH 1320 D-91253 PEGNITZ TEL.: +49 9241 729-0 FAX: +49 9241 729-50 WEB: www.beka-lube.de E-MAIL: [email protected] 1090200384 state: 03.13EN Partners
© Copyright 2024 ExpyDoc
