AGILiGATE PROFINET IO - Profibus International

EQUIPMENTS FOR INDUSTRIAL NETWORKS
Gateway
AGILiGATE
PROFINET IO
Gateway PROFINET IO to serial link
Réf. : AG-P013
Application areas
AGILiGATE PROFINET IO is a gateway to exchange data between a PROFINET IO network and
equipments with a serial link.
AGILiGATE PROFINET is an IO-Device.
The serial link is fully configured via the IOController A wide range of PROFINET data
modules allows the exchange of serial data
inputs and outputs.
Relevant diagnostic alarms, together with
straightforward indicators and an embedded webserver, speed-up troubleshooting,
in case of serial link failure for example.
The embedded web server is also available for I&M information, user manual, download GSD file,
manageable switch statistics.
Customized web pages can be downloaded in the AGILiGATE file system, and interact with I/O
data. AGILiGATE runs at the same time as a MODBUS/TCP server or gateway.
AGILiGATE PROFINET IO uk rev. A
Page 1
AGILiGATE PROFINET IO
AGILiGATE allows real time data exchange between a MODBUS RTU equipment or serial link and a
PROFINET IO controller.
Easy integration of your equipement in PROFINET
tools
AGILiGATE can be used in any PROFINET IO configuration
tool, after insertion of its GSD file in the catalog.
AGILiGATE is fully initialized via extended parameters.
The automation engineer can choose modules and
parameters necessary, according to the amount of I/O data
to exchange.
Setting parameters via the
configuration tool of the PLC
Process or diagnostic alarms can also be notified to the IO
controller, in case of problem on the serial link.
Serial link RS232/RS485
Ethernet switch 2 ports
Status indicators
Digital IN
Digital OUT
IP configuration
RS485 termination
Page 2
AGILiGATE PROFINET IO
Technical features
PROFINET IO DEVICE
 Physical layer 100Base-T (Fast Ethernet)
 Integrated switch 2 ports
 Redundancy MRP client
 RJ45 connector
 Autonegociation and autocross
 Inputs : Up to 512 bytes
 Outputs : Up to 512 bytes
 Name of the equipment set by DCP
 Support PROFINET LLDP and SNMP
 Conformance Class B
 Min cycle time : 2 ms
MODBUS/TCP server or gateway
 Access to AGILiGATE internal data via MODBUS
TCP
 Access data from serial equipments
 Up to 3 simultaneous connections
 UDP/TCP, port 502
Embedded web server
 HTTP v1.1 supported
 Identification and maintenance data
 Access to the user manual and GSDML file
 Access to the file system
 Firmware update
 Statistics from the 2-ports switch
 CGI server for a dynamic update of the datas
 JavaScript library to create AJAX requests in the
customized web pages
Serial link
 Up to 115200 bits/s
 7 or 8 data bits
 RS232 or RS485. Selection by switch
 Full duplex in RS232
 Termination can be activated by switch or RS485
 Removable terminals
Transparent mode
 Configurable for any serial protocol
 End of frame detection can be set
 Frame trigger can be set (cyclic or change)
Intelligent MODBUS serial mode
 Master or slave
 RTU or ASCII
 Implemented functions 1, 2, 3, 4, 5, 6, 7, 15, 16, 23
 Adjustable trigger mode for each frame
Local I/O
 1 insulated digital input
 1 relay output. Driven by PROFINET alarms or
PROFINET cyclic outputs
Mechanical
 IP 20 plastic case. For DIN-rail
 Size : 120 x 100 x 23 mm (L x w x h)
 Use and storage temperature : -25°C…+70°C
Power supply
 24 VDC +/-10%
 1,7W
File system and FTP server
 File system for the storage of customized web
pages (8 Mo)
 Access to the documentation and GSDML file via
FTP
 Updated by FTP
Bâtiment B
1, rue de la Briaudière
Z.A de la Châtaigneraie
37 510 BALLAN – MIRE
Tel. 02 47 76 10 20
Fax 02 47 37 95 54
E-mail : [email protected]
http://www.agilicom.fr
Page 3

Download Report