Hot Melt Adhesive Applicators Series SB60‐BoD Parts List P/N 7179970_04 - English Issued 06/14 NORDSON ENGINEERING GMBH D LÜNEBURG D GERMANY Note This document is valid for the entire series. Order number P/N = Order number for Nordson products Notice This is a Nordson Corporation publication which is protected by copyright. Original copyright date 2013. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Nordson Corporation. The information contained in this publication is subject to change without notice. E 2014 All rights reserved. - Original Document Trademarks AccuJet, AeroCharge, Apogee, AquaGuard, Asymtek, Automove, Autotech, Baitgun, Blue Box, Bowtie, Build‐A‐Part, CanWorks, Century, CF, CleanSleeve, CleanSpray, Color‐on‐Demand, ColorMax, Control Coat, Coolwave, Cross‐Cut, cScan+, Dage, Dispensejet, DispenseMate, DuraBlue, DuraDrum, Durafiber, DuraPail, Dura‐Screen, Durasystem, Easy Coat, Easymove Plus, Ecodry, Econo‐Coat, e.DOT, EFD, Emerald, Encore, ESP, e stylized, ETI‐stylized, Excel 2000, Fibrijet, Fillmaster, FlexiCoat, Flexi‐Spray, Flex‐O‐Coat, Flow Sentry, Fluidmove, FoamMelt, FoamMix, Fulfill, GreenUV, HDLV, Heli‐flow, Helix, Horizon, Hot Shot, iControl, iDry, iFlow, Isocoil, Isocore, Iso‐Flo, iTRAX, JR, KB30, Kinetix, LEAN CELL, Little Squirt, LogiComm, Magnastatic, March, Maverick, MEG, Meltex, Microcoat, Micromark, Micromedics, MicroSet, Millenium, Mini Squirt, Moist‐Cure, Mountaingate, MultiScan, Nordson, Optimum, Package of Values, PatternView, PermaFlo, PicoDot, PluraFoam, Porous Coat, PowderGrid, Powderware, Precisecoat, PRIMARC, Printplus, Prism, ProBlue, Prodigy, Pro‐Flo, ProLink, Pro‐Meter, Pro‐Stream, RBX, Rhino, Saturn, Saturn with rings, Scoreguard, SC5, S. design stylized, Seal Sentry, Select Charge, Select Coat, Select Cure, Signature, Slautterback, Smart‐Coat, Solder Plus, Spectrum, Speed‐Coat, Spraymelt, Spray Squirt, Super Squirt, SureBead, Sure Clean, Sure Coat, Sure‐Max, Sure Wrap, Tela‐Therm, Tracking Plus, TRAK, Trends, Tribomatic, TrueBlue, TrueCoat, Tubesetter, Ultra, UniScan, UpTime, u‐TAH, Value Plastics, Vantage, Veritec, VersaBlue, Versa‐Coat, VersaDrum, VersaPail, Versa‐Screen, Versa‐Spray, VP Quick Fit, Walcom, Watermark, When you expect more. are registered trademarks - ® - of Nordson Corporation. Accubar, Active Nozzle, Advanced Plasma Systems, AeroDeck, AeroWash, AltaBlue, AltaSlot, Alta Spray, AquaCure, Artiste, ATS, Auto‐Flo, AutoScan, Axiom, Best Choice, BetterBook, Blue Series, Bravura, CanNeck, CanPro, Celero, Chameleon, Champion, Check Mate, ClassicBlue, Classic IX, Clean Coat, Cobalt, ContourCoat, Controlled Fiberization, Control Weave, CPX, cSelect, Cyclo‐Kinetic, DispensLink, DropCure, Dry Cure, DuraBraid, DuraCoat, e.dot+, E‐Nordson, Easy Clean, EasyOn, EasyPW, Eclipse, Equalizer, EquiBead, Exchange Plus, FillEasy, Fill Sentry, Flow Coat, Fluxplus, G‐Net, G‐Site, Get Green With Blue, Gluie, Ink‐Dot, IntelliJet, iON, Iso‐Flex, iTrend, KVLP, Lacquer Cure, Maxima, Mesa, MicroFin, MicroMax, Mikros, MiniBlue, MiniEdge, Minimeter, MonoCure, Multifil, MultiScan, Myritex, Nano, NexJet, OmniScan, OptiMix, OptiStroke, Origin, Partnership+Plus, PatternJet, PatternPro, PCI, Pinnacle, Plasmod, PluraMix, Powder Pilot, Powder Port, Powercure, Process Sentry, Pulse Spray, PURBlue, PURJet, PurTech, Quad Cure, Ready Coat, RediCoat, RollVIA, Royal Blue, Select Series, Sensomatic, Shaftshield, SheetAire, Smart, Smartfil, SolidBlue, Spectral, Spectronic, SpeedKing, Spray Works, StediFlo, Summit, Sure Brand, SureFoam, SureMix, SureSeal, Swirl Coat, TAH, Tempus, ThruWave, TinyCure, Trade Plus, Trilogy, Ultra FoamMix, UltraMax, Ultrasaver, Ultrasmart, Universal, ValueMate, Versa, Viper, Vista, WebCure, YESTECH, 2 Rings (Design) are trademarks - T - of Nordson Corporation. Designations and trademarks stated in this document may be brands that, when used by third parties for their own purposes, could lead to violation of the owners' rights. P/N 7179970_04 SB60_Parts E 2014 Nordson Corporation Table of Contents I Table of Contents How to Use Illustrated Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . Assembly Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ship-With-Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tight‐Fit Screws + Disc Springs . . . . . . . . . . . . . . . . . . . . . . . . . . Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Guiding Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Threaded Bush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O‐Rings for Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solenoid Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjustable Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E 2014 Nordson Corporation SB60_Parts 1 1 2 4 6 7 7 8 9 10 12 13 14 15 17 P/N 7179970_04 II Table of Contents P/N 7179970_04 SB60_Parts E 2014 Nordson Corporation Spare Parts 1 How to Use Illustrated Parts List The parts lists are divided into the following columns: Item Identifies parts shown. Part Nordson part number. A row of hyphens (- - - - -) indicates that this part can not be ordered separately. Description This column contains the name of the part and, when appropriate, its dimensions and other properties. The points in the column Description show the relationship between assemblies, subassemblies and single parts. Quantity The quantity needed per unit, assembly or subassembly. The abbreviation AR (as required) is used when this item is a bulk item or when the quantity per assembly depends on the product version or model. Number in parentheses = additional quantity as spares. Assembly Overview Fig. 1 Item Part - 7187575 Applicator SB60-BoD AB1-60 SB1x3mm 1 Fig. 2 NS 7183064 S Kit-INST Ship-with kit SB60-BoD 1 Fig. 5 E 2014 Nordson Corporation Description SB60_Parts Quantity Note P/N 7179970_04 2 Spare Parts Applicator 6 1 3 2 7 5 4 see fig. 3 8 Fig. 2 P/N 7179970_04 SB60_Parts E 2014 Nordson Corporation Spare Parts Item Part 1 ----- Guide plates 2 Fig. 9 2 ----- Clamp SB60-BoD compl 1 Fig. 8 3 7183079 Nozzle 1 Fig. 4 4 ----- Trigger Bar SB60-BoD 1 5 ----- Adjustable device 1 Fig. 14 NS ----- Threaded bush 1 Fig. 11 6 7183068 Control module SB60 3,5 fl. val. Tandem 1 A 7 7140961 Cord set w/ Ni120 temperature sensor KO/MI/0,650/1xNI120/1xTS UL 1 8 204999 S Solenoid valve 5/2ways 24V/1,8W NC flg. 1 - ----- Safety signs 1 Note Description Quantity 3 Note Fig. 15 A: Use new o‐rings when replacing modules. Refer to page 13, O‐Rings for Modules NS: Not Shown 2 1 Fig. 3 Item Part 1 444248 Heater cartridge 1/4"x1,5" 230V-50W UL 9 2 7147786 Thermostat 230°C ±5°C UL 1 A 7186196 Thermostat 230°C ±5°C UL 1 B Note Description Quantity Note A: Max. operating temperature: 200 °C (see ID plate) - until June 2014 B: Max. operating temperature: 170 °C (see ID plate) - beginning July 2014 E 2014 Nordson Corporation SB60_Parts P/N 7179970_04 4 Spare Parts Nozzle 1 6 10 9 3 2 11 5 8 7 10 4 Fig. 4 P/N 7179970_04 SB60_Parts E 2014 Nordson Corporation Spare Parts Item Part 1 7183079 2 Description 5 Quantity Coating nozzle SB60-BoD rh AB1-60 S0.8 1 ----- S Mouthpiece 2 SB60-BoD-VB2 rh AB1-60 1 3 ----- S Mouthpiece SB60-BoD rh AB1-60 VX 1 NS ----- S Limiter dia 8.1 vol. comp. SB60-BoD VX 1 4 ----- S Limiter dia 9.7 vol. comp. SB60-BoD VX 1 5 ----- S Clamping bar SB60/EB60-Flex VX 1 6 ----- S Piston spindle SB60-BoD M8x1,25 1 7 7183077 S Slide SB60/EB60-Flex 1 8 ----- S Tight-fit screw M5x20 D6 Sp. 4 NS ----- S Shim ring PW-S D12.5 d8,5 t0,1 3 9 ----- S Spindle nut screw PW-S M14x1 D8,5 1 NS ----- S Spindle nut PW-S dM8 D12,9 1 10 ----- S Allan head cap screw M3X16 V2A DIN912 2 11 ----- S Allan head cap screw M6x20 DIN912 SST 3 NS ----- S Set screw M3x4/45H DIN915 4 NS ----- S Parallel pin D3m6x20 DIN6325-D 1 NS ----- S Parallel pin D4m6x12 DIN6325-D 2 NS ----- S Disc spring D12,5 GR1 DIN2093 type A 48 NS ----- S O‐ring 5x1,5 Viton 2 NS ----- S O-ring 7x1,5 Vito 2 NS ----- S QUADRING 8,2x1,78 1 NS ----- S SEALING CORD D2 16 mm NS: Not Shown E 2014 Nordson Corporation SB60_Parts P/N 7179970_04 6 Spare Parts Ship-With-Kit 1 5 2 3 4 6 7 Fig. 5 Item Part - 7183064 1 Description Quantity Kit-INST Ship-with kit SB60‐BoD 1 ----- S High-temperature grease, 250g 1 2 ----- S O-ring 5x1,5 Viton 4 3 ----- S O-ring 7x1,5 Viton 4 4 ----- S SEALING CORD D2 5 ----- S Measuring magnifier 8x 1 6 ----- S Feeler gauge complete 1 7 ----- S Quadring 8,2 x 1,78 2 P/N 7179970_04 16 mm SB60_Parts E 2014 Nordson Corporation Spare Parts 7 Service Kits Seals 2 1 4 3 Fig. 6 Item Part - 7183086 1 ----- S O-ring 5x1,5 Viton 2 (+2) 2 ----- S O-ring 7x1,5 Viton 2 (+2) 3 ----- S QUADRING 8,2x1,78 1 (+1) 4 ----- S SEALING CORD D2 16 mm Note Description Kit-SVC SB60-BoD seals Quantity Note 1 A A A: Also part of Ship-With-Kit P/N 7183064, see fig. 5 E 2014 Nordson Corporation SB60_Parts P/N 7179970_04 8 Spare Parts Tight‐Fit Screws + Disc Springs 3 7 2 1 Fig. 7 Item Part - 7183087 1 ----- S Tight-fit screw M5x20 D6 Sp. 4 (+1) Fig. 8 2 ----- S Disc spring A16x8,2x0,9 DIN2093 type A 48 (+4) Fig. 8 3 ----- S Tight-fit screw M5x8 D6 Sp. 4 (+4) P/N 7179970_04 Description Kit-SVC SB60-BoD tight-fit screws + disc springs SB60_Parts Quantity Note 1 E 2014 Nordson Corporation Spare Parts 9 Clamp 1 3 2 Fig. 8 Item Part - 7183088 1 Description Quantity Note Kit-SVC SB60-BoD clamping bar 1 ----- S Clamping bar SB60‐BoD 1 2 ----- S Tight-fit screw M5x20 D6 Sp. 7 A 3 ----- S Disc spring D12,5 GR1 DIN2093 type A 48 A 4 ----- S Slide SB60-BoD 1 Note A: Also part of tight-fit screws + disc springs kit P/N 7183087, see fig. 7 E 2014 Nordson Corporation SB60_Parts P/N 7179970_04 10 Spare Parts Guiding Plates 4 1 0,8x3 2 3 Fig. 9 Item Part - 7183094 1 Description Quantity Note Kit-SVC SB60-BoD guide pl. s.glue: 0.8x3 1 A ----- S Tight-fit screw M5x8 D6 Sp. 4 B 2 ----- S Guiding plate lh SB60 side glue 0.8x3 1 3 ----- S Guiding plate rh SB60 side glue 0,8x3 1 4 ----- S High-temp.grease GLS 595/N2 can:10g Note A: Only 7183094 is included in the scope of delivery. C: Also part of tight-fit screws + disc springs kit P/N 735625, see fig. 7 P/N 7179970_04 SB60_Parts E 2014 Nordson Corporation Spare Parts Guiding Plates 11 (Forts.) 4 1 2 3 Fig. 10 Item Part - 7196553 1 Description Quantity Note Kit-SVC SB60-BoD guide pl. w/o side glue: 1 A ----- S Tight-fit screw M5x8 D6 Sp. 4 B 2 ----- S Guiding plate lh SB60 w/o side glue 1 3 ----- S Guiding plate rh SB60 w/o side glue 1 4 ----- S High-temp.grease GLS 595/N2 can:10g Note A: Only 7196553 is included in the scope of delivery. D: Also part of tight-fit screws + disc springs kit P/N 735625, see fig. 7 E 2014 Nordson Corporation SB60_Parts P/N 7179970_04 12 Spare Parts Threaded Bush 4 2 3 1 Fig. 11 Item Part - 7183089 1 Description Quantity Kit-SVC SB60-BoD threaded bush M8x1,25 1 ----- S Spindle nut PW-S dM8 D12,9 1 2 ----- S Spindle nut screw PW-S M14x1 D8,5 1 3 ----- S Shim ring PW-S D12.5 d8,5 t0,1 4 4 ----- S Parallel pin D3m6x20 DIN6325-D 1 P/N 7179970_04 SB60_Parts Note E 2014 Nordson Corporation Spare Parts 13 O‐Rings for Modules 1 2 Fig. 12 Item Part - 7183091 Kit-SVC SB60-BoD o-rings for modules 1 1 250257 S o-ring 16x2 Viton 80 shore A black 1 (+4) 2 251764 S o-ring 14x2 Viton 1 (+4) E 2014 Nordson Corporation Description SB60_Parts Quantity P/N 7179970_04 14 Spare Parts Solenoid Valve 1 3 2 Fig. 13 Item Part - 7183100 1 Description Quantity Kit-SVC SB60-BoD solenoid valve 5/2ways 1 ----- S Solenoid valve 5/2ways 24V/1,8W NC flg. 1 2 ----- S Seal EP48-V 27,3x15x3 1 3 ----- S Allan head cap screw M3x20 DIN912 A2 2 P/N 7179970_04 SB60_Parts Note E 2014 Nordson Corporation Spare Parts 15 Adjustable Device 5 1 10 7 8 6 3 9 2 4 Fig. 14 E 2014 Nordson Corporation SB60_Parts P/N 7179970_04 16 Spare Parts Item Part - 7183090 Kit-SVC SB60-BoD adjustable device 1 1 ----- S Piston spindle SB60-BoD M8x1,25 1 2 ----- S Bracket spindle bearing, SB60-BoD 1 3 ----- S Adapter spindle bearing, SB60-BoD 1 4 ----- S Spindle bearing support, SB60-BoD 1 NS ----- S Angular ball bearing two-row d12D32B15,9 1 5 ----- S Shaft nut M12x1 KM1 1 NS ----- S Circlip bore D32 t=1,2 DIN472 1 NS ----- S Lock washer D9-12 DIN6799 SST 1 6 ----- S Spoke handwheel D100/d10 type:GN522.3 1 NS ----- S Feather key A 3x3x14 DIN6885 1 NS ----- S Washer D4,3 DIN9021 type B 1 NS ----- S Allan head cap screw M4x10 DIN912A270 1 7 ----- S Allan head cap screw M5x12 DIN912 SST 1 8 ----- S Allan head cap screw M5x16 DIN912 A2-70 1 9 ----- S ALLAN HEAD CAP SCREW M5x50 DIN912 SST 1 NS ----- S ALLAN HEAD CAP SCREW M3x8 DIN912 SST 4 NS ----- S Setscrew M3 x 4 DIN 916 VZ 3 10 ----- S Sicherungsscheibe S M5 / B53070 3 P/N 7179970_04 Description SB60_Parts Quantity E 2014 Nordson Corporation Spare Parts 17 Safety Signs 3 1 4 2 Fig. 15 Item Part - 7157181 Kit-SVC SB60-BoD warning signs 1 1 290082 S Sign, hot surface, general UL 1 2 290083 S Sign dangerous voltage 2 3 ----- S NOTCHED TAPER PIN 1,7x4 DIN1476 4 ----- S Notched taper pin 2,5x5 DIN1476 E 2014 Nordson Corporation Description SB60_Parts Quantity Note 2 (+1) 4 P/N 7179970_04 18 Spare Parts P/N 7179970_04 SB60_Parts E 2014 Nordson Corporation
© Copyright 2024 ExpyDoc
