A-10C MP SADL Guide

A-10C Multiplayer SADL Guide
( xx ) = Hotas command
[ xx ] = Keyboard command
Setup (All with TAD as SOI):
•
•
•
•
JTRS set to On.
Network - NET OSB10:
◦ Callsign - Type on CDU - Enter on TAD OSB17.
◦ Own ID - Type on CDU - Enter on TAD OSB07.
◦ Group ID - Type on CDU- Enter on TAD OSB08.
SPI Display to ALL - Profile OSB01 - CHG-SET OSB16 - UP/DWN OSB19+20 - TOGGLE OSB18
SPI Broadcast On/Off - TOGGLE ON/OFF - ( DMS Left Long ) [ Delete Long ]
Target Assignment:
•
•
•
•
•
TGP SOI - Find target / targets
TGP Point - ( TMS Fwd Short ) [ L-Ctrl+UP Short ]
TGP SPI - ( TMS Fwd Long ) [ L-Ctrl+UP Long ]
Lase to Target - ( NWS ) [ INS ]
TAD SOI - Slew to recieptient - ( TMS Fwd Short ) [ L-Ctrl+UP Short ] – Send OSB07
Target Reception:
Recieve ”NEW TASKING”
◦ Accept - TAD SOI - Wilco OSB19
◦ Refuse - TAD SOI - Cntco OSB07
• Set TAD to EXP1 or EXP2 mode - ( China Hat Fwd Short ) [ V short ]
• Slew TAD to assigned target (Red triangle) (Zoom if nessesary)
• Set Hookline - ( TMS Fwd short ) [ L-Ctrl+UP Short ]
• Set as SPI - ( TMS Fwd Long ) [ L-Ctrl+UP Long ]
◦ Slew TGP or MAV to TAD SOI - ( China Hat Fwd Long ) [ V Long ]
• Engage targets.
--------------------------------------------------------------------------------------------------------------------------------------------• To De-Clutterm TAD:
◦ TAD SOI - slew TAD to triangle – CNC OSB07
•
Messaging (R-MFCD all with MSG OSB12 selected):
•
Sending:
◦ Type message on CDU (Max 24 characters)
◦ R-MFCD - MOD TEXT OSB06
▪ Repeate until all message is displayed on R-MFCD (Max 10 lines)
◦ TAD SOI - Slew to recieptient - Note recieptient ID (If ID not known)
◦ Type recieptient ID on CDU - R-MFCD - Enter recieptient ID OSB18
◦ Send message OSB17
•
Recieving:
◦ R-MFCD - MSG OSB12
▪ Recieved - OSB02
▪ Delete - OSB03
▪ Reply to sender - OSB18 via OSB01
◦ Clear note - ( TMS Left Long ) [ L-Ctrl+Left Long ]
1

Download Report