RINGS FORUM RINGS is an LED specific lighting system by FORUM. Cutting PRODUCT edge diffusion technology, minimalistic hardware, and DESCRIPTION remote mounted electronics provides superior lighting Arial font performance in an ultra-sleek Size 9 or larger low-profile design. Multiple size configurations, output levels and mounting scenarios are available. The JOB TYPE SURFACE/ DIRECT SUSPENDED/ DIRECT-INDIRECT ORDERING CODE Indirect RNG Series Size RINGS 18 = 18” OD By FORUM 24 = 24” OD 36 = 36” OD 48 = 48” OD Direct Mounting LED Spec Color Distribution Shielding S = Surface * LED = LED SC = Straight ** Cable CC = Conical ** Cable H = Rigid *** Stem 3H = Triple ** Stem D = Direct I = Indirect 5050 = 50% Direct/Indirect 27 = 2700K 30 = 3000K 40 = 4000K 50 = 5000K 65 = 6500K Voltage Finish SAT = Satin Frosted 120V WOL = White Opal 277V CAL = Clear Acrylic UNV Option 1 Option 2 WH = White EC = Emergency Circuit S = Silver DIM = Dimming ** BRZ = Bronze ID = Integral Driver BLK = Black BRA = Brushed Aluminum CC = Custom Color * * Please provide custom color RAL # ________________________________ * Direct light only ** Please specify overall distance from ceiling (24” 36” or 48”) TECHNICAL DRAWINGS PRODUCT IMAGE ** Please specify dimming manufacturer/model (if required) ______________________ * Dimensions provided as general information. Please see shop drawings for specific rough in dimension 0.875 Ø Ø Ø Ø 43.0625 31.750 18.625 14.8125 Ø Ø Ø Ø 45.5625 34.250 21.125 17.3125 0.875 this information at any time - UPDATED 2/4/14 Ø 43.0625* Forum reserves the right toØ change 45.5625 SPECIFICATION Ø 31.750 Ø 34.250 HOUSING: 1/8” thick spun formed Aluminum DIFFUSION: 6mm thick edge-lit diffusor housing. 7/8” low Ø profile design for surface, stem, Ø 21.125 with native 50/50 direct/indirect properties 18.625 and cable mounted applications. with clear protective inlay standard. Additional Ø 14.8125 Ø 17.3125 frosted and white options are available for MOUNTING: Cable suspended configurations utilize 3/64” aircraft cable in straight or conical setups. Stem mounts utilize a single rigid 3/8” pipe stem. Surface mounted units affix via a 1/8” aluminum backing plate directly to junction boxes. desired effects. POWER: All configurations utilize a remotely located LED driver unit. Unit is UL listed and IP 65 rated. Low voltage lines can then be run to specific install location. DRIVER: 120V, 227, and Universal voltage drivers available with 0-10V dimming. Please consult factory for special driver requirements and warranty information. LISTING: All fixtures bare an AFL-CIO/IBEW union label and are UL listed dry location. For alternative location configurations, please consult factory. Forum, Inc. - 100 Chapel Harbor Dr. - Pittsburgh, Pennsylvania 15238 - T: (412) 781-5970 F: (412) 781-5971 - www.forumlighting.com
© Copyright 2024 ExpyDoc
