HARGON 350

HARGON 350
line extender/end amplifier for DOCSIS 3.1
RF Parameters
Forward Channel
Bandwidth
85...260 – 1218 MHz
Gain @1.2GHz
2 x 37 ± 1 dB
Noise figure
< 7 / 8.5 dB
1
Flatness 2
90 ÷ 862 MHz
90 ÷ 1006 MHz
90 ÷ 1212 MHz
Slope
≥ -0.5 and ≤ +0.5 dB
≥ -0.75 and ≤ +0.75 dB
≥ -1.0 and ≤ +1.0 dB
± 1 dB
Output level
CTB ≤ -60dBc, flat
CSO ≤ -60dBc, flat
2 x 110 dBμV
2 x 113 dBμV
Return loss 4
> 18 dB
Input testpoint (bi-directional)
-20 ± 1.5 dB
Output testpoints (directional)
-20 ± 0.5 dB
Forward gain (A), slope (E) control:
A1, E1 (ATG)
A2, E2 (ATG)
E0 (jumper)
0 – 20 step 1 dB
0 – 20 step 1 dB
0 / 14 dB
3:
Reverse Channel
Bandwidth
5 – 65...200 MHz
Flatness 5
± 0.5 dB
Return loss
6
1.2GHz technology
Extended bandwidth in downstream up to 1.2GHz
> 18 dB
Gain 7
2 x 22 / -8 dB
HUM modulation 8
≤ -60 dBc
Possibility of extending bandwidth in upstream up to 200MHz
Reverse gain (A), slope (E) control:
A3, A4, A5, E3
0 – 20 step 0.5 dB
GREEN mode – Intelligent Power Consumption
Noise figure 9
< 6 dB
200MHz technology
Significant reduction of power consumption through
optimization of its use
VIG (VECTOR INGRESS GUARD) system
compliant
Others
Voltage range:
remote powering
mains powering
30 – 65 V AC
230 ± 10% V AC
Max. current for RF ports
7A
Max. current for AC IN port
4A
Power consumption
< 11 W
Operation temperature range
- 40 – 60 ºC
Connectors
IEC / 2 x F
Protection class 10
IP 44
Dimensions (W x L x H)
202 x 172 x 80 mm
Weight
2 kg
Verification and elimination of the source of ingress in the network
JXP configuration
Simple and cost-effective configuration of devices through plug-in
modules
GaN Technology
Improved output parameters for analog and digital carriers, at a lower
power consumption
1. N.F. < 7dB for 862MHz; N.F. < 7.5dB for ≤ 1002MHz, N.F. < 8.5dB for ≤ 1218MHz typical value
2. Valid 15MHz after the starting frequency of the selected diplex filter
3. Typical value, According to EN50083-3, 0dB interstage slope, 42 channels CENELEC,
4. 18dB for f ≤ 40MHz, 18dB -1.5dB/oct for f >40MHz
5. For 5 – 60MHz with DF65G
6. >16dB for 5MHz < f < 8MHz; > 18dB for f > 8MHz
7. For active return path / passive return path; +/- 1dB
8. For f >16MHz, remote current < 6A @25ºC, typical value
9. Up to 200MHz, with diplex filters, typical value, NF <7 for f=200MHz
10. With AC IN connector; IP 65 without AC IN connector
Unless otherwise specified, all specifications are tested with 65/85 diplex filters installed; GREEN=0,
at room temperature 25°C
www.vector.net
HARGON 3730
distribution amplifier for DOCSIS 3.1
RF Parameters
Forward Channel
Bandwidth
85...260 – 1218 MHz
Gain @1,2GHz
2 x 43 ± 0.75 dB
Noise figure, typical value
< 8 dB
Flatness 1
± 0.75 dB
Slope
± 1 dB
Output level 2, 3:
CTB ≤ -60dBc
CSO ≤ -60dBc
118 dBμV
118 dBμV
Return loss 4
> 18 dB
Input testpoint (bi-directional)
-20 ± 1.5 dB
Output testpoints (directional)
-20 ± 0.5 dB
Forward gain (A), slope (E) control:
A1, E1
A2, A3
E2, E3
0 – 20 step 0.5 dB
0 – 20 step 0.5 dB
0 – 15 step 0.5 dB
Reverse Channel
Bandwidth
5 – 65...200 MHz
Flatness 5
± 0.75 dB
Return loss 6
> 18 dB
Gain
25 / -11 dB
HUM modulation 7
≤ -60 dBc
Reverse gain (A), slope (E) control:
A4, A5, A6, E4
0 – 20 step 0.5 dB
Others
1,2 GHz technology
Extended bandwidth in downstream up to 1,2 GHz
200MHz technology
Possibility of extending bandwidth in upstream up to 200MHz
GREEN mode – Intelligent Power Consumption
Voltage range:
remote powering 8
Mains powering
30 – 65 V AC
230 ± 10% V AC
Max. current for RF ports
10 A
Max. current for AC IN port
12A
Power consumption 9
36 W
Operation temperature range
- 40 – 60 ºC
Connectors
PG11 (others on request)
Protection class
IP 67
Dimensions (W x L x H)
245 x 215 x 91 mm
Weight
3 kg
Available versions
Significant reduction of power consumption through
optimization of its use
VIG (VECTOR INGRESS GUARD) system
compliant
Verification and elimination of the source of ingress in the network
GaN Technology
Improved output parameters for analog and digital carriers,
at a lower power consumption
NMS transponder
Reduced operating costs thanks to remote monitoring
and configuration
HHT (Hand Held Terminal) support
HARGON 2730 /BP33G 089Y
remote powering
HARGON 2730 /BP33G 089M
mains powering
Quick and intuitive configuration of devices, and electronic
documentation of the network
CMS (Craft Management Software) compliant
Easy and convenient network documentation thanks
to CMS software
1. Valid 15MHz above the starting frequency of the selected diplex filter
2. According to EN50083-3, 9dB interstage slope, 42 channels CENELEC, typical value
3. GREEN 0 (CTB/CSO = 118/118), GREEN 1 (CTB/CSO = 116/118), GREEN 2 (CTB/CSO =
114/118)
4. 18dB for f ≤ 40MHz, 18dB -1.5dB/oct for f >40MHz
5. 7MHz < f < 63MHz
6. >16dB for 5 – 8MHz; > 18dB for f > 8MHz + 1.5dB/oct. for f>40MHz
7. For f >18MHz, remote current <8A @25ºC, typical value
8. With NMS transponder 30 – 65V AC
9. Without NMS transponder @25ºC @65V AC, GREEN 0; 31W = GREEN 1; 28W = GREEN 2
Unless otherwise specified, all specifications are tested with 65/85 diplex filters installed; GREEN=0,
at room temperature 25°C
Specifications are subject to change without notice.
www.vector.net

Download Report