Specifications - Therma

HEAVY DUTY GAS COUNTER RADIANT AND CHAR ROCK BROILERS
Therma-Tek Range Corp.
115 Rotary Drive, Valmont Industrial Park
West Hazleton, PA 18202
HEAVY DUTY GAS COUNTER RADIANT AND CHAR ROCK BROILERS
GENERAL SPECIFICATIONS
Heavy duty gas counter broilers built on welded angle iron frame construction for strength and durability.
Removable grease container is provided for easy cleaning. Standard model sizes are 12” (305 mm), 24” (610
mm), 36”(915 mm), 48”(1,219mm), 60” (1,524 mm) and 72”(1,829 mm). All counter models are range
match when placed on our equipment stand.
STANDARD FEATURES
✹ Fully stainless steel exterior.
✹ 4” (101.5 mm) adjustable legs.
✹ Gas pressure regulator.
✹ One year limited parts and labor warranty.
RADIANT BROILERS
✹ One heavy-duty cast-iron H-Type burner per 12” section; at 30,000 BTU/hr.
✹ Heavy cast-iron radiants with multiple heat sinks retain heat, minimize recovery time during peak periods,
and protect the burner from blockage and flare-ups. (2) radiants per burner.
✹ Each burner is specifically baffled to reflect usable heat away from the drip pan and into the cooking zone.
✹ Heavy-duty cast-iron grates for maximum heat retention and cooking efficiency by minimizing recovery
time during peak periods.
TC24-24RB
✹ Single piece precision brass valves with infinite heat control.
✹ Spatula width grease trough.
✹ Easy to remove drip pans.
CHAR ROCK BROILERS
✹ One heavy-duty cast-iron H-Type burner per 12” section; at 30,000 BTU/hr.
✹ High quality lava rocks on cast iron supports provide maximum heat retention for excellent broiling.
✹ Burners protected by heat shield to prevent blockage of ports and pilot.
✹ Heavy-duty cast-iron grates for maximum heat retention and cooking efficiency by minimizing recovery
time during peak periods.
✹ Single piece precision brass valves with infinite heat control.
✹ Spatula width grease trough.
✹ Easy to remove drip pans.
OPTIONAL FEATURES
TC60SC
✹ OPTION: 89015 Lava Rock (bag) NOTE: One bag of Lava Rock covers one 12” broiler sections
✹ Stainless steel equipment stand with stainless steel bottom shelf and chrome plated leveling feet.
✹ Available sizes 12” (305 mm), 24” (610 mm), 36”(915 mm), 48”(1,219mm), 60” (1,524 mm) and
72”(1,829 mm)
✹ Model example: TC60S
✹A
dd optional casters with suffix C. Model example: TC60SC
THERMA-TEK Sales
Toll Free: 877-843-7835 Tel: 570-455-3000 Fax: 570-455-9491 [email protected] www.therma-tek.com
HEAVY DUTY GAS COUNTER RADIANT AND CHAR ROCK BROILERS
113
16 "
[46.04mm]
Therma-Tek Range Corp.
115 Rotary Drive, Valmont Industrial Park
West Hazleton, PA 18202
113
16 "
[46.04mm]
1
30 41 " 30 4 "
[768.35mm]
[768.35mm]
8"
8"
[203.20mm]
[203.20mm]
3/4" NPT
3/4" NPT
4"
4"
[101.41mm]
[101.41mm]
Operating Manifold Gas Pressure
“WC
5
mbar
12.45
Propane
“WC
10
TC24CRB
Total BTU/Hr
30,000
113
16 "
[46.04mm]
113
16 "
[46.04mm]
TC12-12RB / CRB
12” Radiant OR Char Rock Broiler
TC24-24RB / CRB
24” Radiant OR Char Rock Broiler
TC36-36RB / CRB
36” Radiant OR Char Rock Broiler
TC48-48RB / CRB
48” Radiant OR Char Rock Broiler
TC60-60RB / CRB
60” Radiant OR Char Rock Broiler
TC72-72RB / CRB
72” Radiant OR Char Rock Broiler
NOTE: Add suffix “N” for natural gas, and “L” for propane.
TC24CRB
CLEARANCES
Sides
Non Combustible
0”
For use in Non Combustible locations only.
TC12-12RB
TC12-12CRB
TC24-24RB
TC24-24CRB
TC36CRB
"A"
"A"
30 41 "
[768.35mm]
1"
72
[190.50mm]
TC12G
TC12TG
12"
[304.80mm]
T
TC
T
TC
113
16 "
[46.04mm]
TC60CRB
30 41 "
[768.35mm]
1"
72
[190.50mm]
TC48-48RB
TC48-48CRB
4"
[101.41mm]
[609
TC24G
TC24TG
113
16 "
[46.04mm]
TC72CRB
TC60CRB
TC72CRB
TC60CRB
Because of continuing product improvement, these specifications are subject to change without notice.
113
16 "
[46.04mm]
4"
[101.41mm]
T
T
113
16 "
[46.04mm]
113
16 "
[46.04mm]
Installation Notes
TC60-60RB
This product is NOT approved for residential use.
TC60-60CRB
Please advise us of installation over 2000ft. (610m) altitude.
Installation clearance reduction applies only where local codes permit.
All Therma-Tek products are covered by a one year limited parts and labor warranty.
A detailed warranty is included with the appliance or is available upon request.
Installation and/or operation by other than manufacturer’s recommendations may void warranty.
THERMA-TEK Sales
4"
[101.41mm]
113
16 "
[46.04mm]
113
16 "
[46.04mm]
113
16 "
[46.04mm]
TC48CRB
8"
[203.20mm]
113
16 "
[46.04mm]
113
16 "
[46.04mm]
113
16 "
[46.04mm]
8"
[203.20mm]
3/4" NPT
61.29
140.74
143.01
190.68
236.08
317.80
8.79
17.59
26.38
35.17
43.96
52.75
TC60CRB
3/4" NPT
4"
[101.41mm]
135
310
315
420
520
700
30,000
60,000
90,000
120,000
150,000
180,000
TC36-36RB 8"
TC36-36CRB[203.20mm]
TC48CRB
8"
[203.20mm]
"A"
Kg
113
16 "
[46.04mm]
TC48CRB
3/4" NPT
Lbs.
kW
113
16 "
[46.04mm]
113
16 "
[46.04mm]
113
16 "
[46.04mm]
12305
24
610
36
915
48
1219
60
1524
72
1829
Total BTU/Hr
TC48CRB
Back
0”
3
[768.3
Gross Weight
3/4" NPT
TC36CRB
mm
"A"
Total gas consumption per model
TC48CRB
TC36CRB
113
16 "
[46.04mm]
Dimension “A”
TC36CRB
Description
113
16 "
[46.04mm]
3/
inches
TC12-12RB / CRB
TC24-24RB / CRB
TC36-36RB / CRB
TC48-48RB / CRB
TC60-60RB / CRB
TC72-72RB / CRB
kW
8.79
113
16 "
[46.04mm]
Model Number
113
16 "
[46.04mm]
Model Number
TC36CRB
TC24CRB
Manifold Connection Input Rating per Burner
mbar
24.9
3/4” NPT
T
TC
T
TC
1 " 71 "
72
2
[190.50mm]
[190.50mm]
113
16 "
[46.04mm]
GAS REQUIREMENTS
CRB
6CRB
TC24CRB
113
16 "
[46.04mm]
Natural
TC36-36RB
TC36-36CRB
113
16 "
[46.04mm]
TC36-36RB
TC36-36CRB
3/4" NPT
TC24CRB
"A" "A"
113
16 "
[46.04mm]
TC72-72RB
TC72-72CRB
TC36G
TC36TG
Printed March 2014
Printed in the USA
CHAR BROILERS
113
16 "
[46.04mm]
Toll Free: 877-843-7835 Tel: 570-455-3000 Fax: 570-455-9491 [email protected] www.therma-tek.com
113
16 "
[46.04mm]
113
16 "
[46.04mm]
CHAR BROILERS
TT
113
16 "