Position Count Description 1 CRN 32-2 A-G-G-E-KUBE Product photo could vary from the actual product Product No.: 97744230 Vertical, non-self-priming, multistage, in-line, centrifugal pump for installation in pipe systems and mounting on a foundation. The pump has the following characteristics: - Impellers, intermediate chambers and outer sleeve are made of Stainless steel, DIN W.-Nr. 1.4401. - Pump head cover and base are made of Stainless steel, DIN W.-Nr. 1.4408. - The shaft seal has assembly length according to EN 12756. - Power transmission is via cast iron split coupling. flanges/couplings. The motor is a 3-phase AC motor. Liquid: Liquid temperature range: Liquid temp: Density: 32 .. 248 °F 68 °F 62.29 lb/ft³ Technical: Speed for pump data: Rated flow: Rated head: Shaft seal: Curve tolerance: 3467 rpm 159 US gpm 133 ft KUBE ISO 9906:1999 Annex A Materials: Pump housing: Impeller: Stainless steel DIN W.-Nr. 1.4408 AISI 316 LN Stainless steel DIN W.-Nr. 1.4401 AISI 316 Installation: Maximum ambient temperature: 140 °F Max pressure at stated temperature: 232 psi / 250 °F Pipe connection: 2 1/2" Printed from Grundfos CAPS [2014.01.046] 1/5 Position Count Description Pressure stage: Flange size for motor: 150 Lb. 213TC Electrical data: Motor type: Rated power - P2: Phase: Service factor: Rated speed: 132FA 10 HP 3 1,15 3480-3500 rpm Others: Net weight: Gross weight: 216 lb 234 lb Printed from Grundfos CAPS [2014.01.046] 2/5 97744230 CRN 32-2 60 Hz H [ft] CRN 32-2, 60Hz eta [%] Q = 155 US gpm H = 136 ft Pumped liquid = Water Liquid temperature = 68 °F Density = 62.29 lb/ft³ 200 180 160 140 120 100 100 80 80 60 60 40 40 20 20 Eff pump = 74.1 % 0 0 20 40 60 80 100 120 140 160 180 200 0 Q [US gpm] P2 [HP] NPSH [ft] 8 80 7 70 6 60 5 50 4 40 3 30 2 20 1 0 Printed from Grundfos CAPS [2014.01.046] 10 P2 = 7.14 HP NPSH = 9.19 ft 0 3/5 Product name: Product No.: EAN: Price: CRN 32-2 A-G-G-E-KUBE 97744230 5710623617879 On request Technical: Speed for pump data: Actual calculated flow: Resulting head of the pump: Impellers: Shaft seal: Curve tolerance: Stages: Pump version: Model: Cooling: 3467 rpm 155 US gpm 136 ft 2 KUBE ISO 9906:1999 Annex A 2 A A TEFC eta [%] 180 160 Liquid: Liquid temperature range: Liquid temp: Density: 32 .. 248 °F 68 °F 62.29 lb/ft³ Electrical data: Motor type: Rated power - P2: Phase: Service factor: Rated speed: Motor protection: Thermal protec: Motor Number: 132FA 10 HP 3 1,15 3480-3500 rpm PTC external 85903410 Others: Net weight: Gross weight: 216 lb 234 lb Printed from Grundfos CAPS [2014.01.046] 100 80 80 60 60 40 40 20 20 Eff pump = 74.1 % 0 0 50 100 150 0 Q [US gpm] P2 [HP] NPSH [ft] 7 70 6 60 5 50 4 40 3 30 2 20 P2 = 7.14 HP NPSH = 9.19 ft 1 0 10 0 8 3/4" 5 3/8" PRIMING PORT (G 1/2) G 1/2 PLUG WITH 1/4"TAP FOR GAUGE/ SENSOR G 1/2" 2 1/2" ANSI 150 LB R.F. 4x ø3/4" 6 11/16" 8 7/8" 12 5/8" 7" 140 °F 232 psi / 250 °F G 2 1/2" 150 Lb. 213TC 100 4 1/4" Installation: Maximum ambient temperature: Max pressure at stated temperature: Connect code: Pipe connection: Pressure stage: Flange size for motor: 120 5 1/2" Stainless steel DIN W.-Nr. 1.4408 AISI 316 LN Stainless steel DIN W.-Nr. 1.4401 AISI 316 G E 140 1 3/16" Material code: Code for rubber: 200 4 1/8" Impeller: CRN 32-2, 60Hz Q = 155 US gpm H = 136 ft Pumped liquid = Water Liquid temperature = 68 °F Density = 62.29 lb/ft³ 15 5/8" Materials: Pump housing: H [ft] Value 22 3/4" Description 2 15/16" 4x ø9/16" 9 7/16" 11 3/4" 4/5 97744230 CRN 32-2 60 Hz 4 1/4" 4x ø9/16" 4x ø3/4" 2 1/2" ANSI 150 LB R.F. 11 3/4" 5 1/2" 9 7/16" 2 15/16" G 1/2" 7" 12 5/8" 8 7/8" 6 11/16" G 1/2 PLUG WITH 1/4"TAP FOR GAUGE/ SENSOR 5 3/8" 4 1/8" 8 3/4" PRIMING PORT (G 1/2) 1 3/16" 22 3/4" 15 5/8" Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos CAPS [2014.01.046] 5/5
© Copyright 2024 ExpyDoc
