CUVERRO PRICE LIST AS OF JULY 2014 TRIMCO Cat Sec. DESCRIPTION 553 Drawer Pull 3" ctc 40.00 D 562-3 Drawer Pull 3-1/2" ctc 26.00 D 562-4 Drawer Pull 4" ctc 28.00 D 562-96(mm) Drawer Pull 96mm ctc 28.00 Add $0.40 LIST for screws over 1-1/2" long 571-6 Cabinet Pull - 6" ctc 42.00 urb 571-8 Cabinet Pull - 8" ctc 48.00 urb 571-10 Cabinet Pull - 10" ctc 55.00 urb 1001-1 1001-1CFC Push Plate 3" x 12" Push Plate 3" x 12" - Cut for Cyl 40.00 D D 1001-2 1001-2CFC Push Plate 3-1/2" X 15" Push Plate 3-1/2" X 15" Cut for Cyl 38.00 D D 1001-3 1001-3CFC Push Plate 4" x 16" Push Plate 4" x 16" - Cut for Cyl 45.00 D D 1001-9 1001-9CFC Push Plate 6" x 16" Push Plate 6" x 16" - Cut for Cyl 64.00 D D Push Plate 8" x 16" 72.00 D 1001-11 Standard Cut for Cylinder is 1-1/4" dia. hole, 2" from top of plate, centered to center of hole. CFC = Cut for Cylinder 1015-2 Pull Plate 3-1/2" x 15" 125.00 D 1015-3 with 6" ctc Pull Pull Plate 4" x 16" 130.00 D 1015-3B with 6" ctc Pull Pull Plate 4" x 16" 135.00 D with 8" ctc Pull ADA 1017-2 Pull Plate 3-1/2" x 15" 88.00 D 1017-2B with 6" ctc Pull Pull Plate 3-1/2" x 15" 98.00 D 1017-3 with 8" ctc Pull Pull Plate 4" x 16" 95.00 D 1017-3B with 6" ctc Pull Pull Plate 4" x 16" 105.00 D 1017-3C with 8" ctc Pull Pull Plate 4" x 16" 120.00 D 120.00 D with 10" ctc Pull ADA 1018-2 Pull Plate 3-1/2" x 15" with 8" ctc Pull 1 CUVERRO PRICE LIST AS OF JULY 2014 TRIMCO 1018-2B 138.00 Cat Sec. D 130.00 D 150.00 D 110.00 D 105.00 D 244.00 D 338.00 D 465.00 D 210.00 D 210.00 D 220.00 D 65.00 D 130.00 D 65.00 D 160.00 D DESCRIPTION Pull Plate 3-1/2" x 15" with 10" ctc Pull 1018-3 Pull Plate 4" x 16" with 8" ctc Pull 1018-3B Pull Plate 4" x 16" with 10" ctc Pull ADA 1060 Flush Pull 2-3/4" x 4-1/4" 1061 Flush Pull 2-1/16" x 3-1/8" NOT ADA For Same Finish Inside Cup and Outside add 20% NOTE: This Part will be made of all CuVerro alloy - NO PVC Edge on Pull 1069 Pocket Door - Push/Pull ADA 1069L Pocket Door Pull - Passage latchset ADA 1069FP Pocket Door Pull - FULL PRIVACY (with emergency key) -SPECIFY HANDING ADA 1111A Flush Pull - 5" x 5" Mounting holes in Cup ADA BTB not available use the 1111B 1111B* Flush Pull - 5" x 5" Mounting Holes in Face Plate ADA *Special BTB Application Available 1111C* Flush Pull - 6" x 6" Mounting holes in Cup Meets California Disability Requirements ADA *Special BTB Application Available 1115 Flush Pull 3-1/2" x 4-3/4" 1115B Flush Pull - BTB / Pair 3-1/2" x 4-3/4" 1115C Flush Pull 3-1/2" x 4-3/4" Mounting in Cup 1115P Flush Pull - BTB with Lugs 3-1/2" x 4-3/4" 2 CUVERRO PRICE LIST AS OF JULY 2014 TRIMCO 1134* Cat Sec. DESCRIPTION Hospital Pull - 6" ctc 200.00 ADA 1134B* Hospital Pull - 4-7/8" ctc 420.00 BTB / Pair ADA *For finishes 605, 606, & 609 10 piece minimum 1135 Hospital Pull - 6" ctc 225.00 D 70.00 D 79.00 D 90.00 D 96.00 D ADA For finishes 605, 606, & 609 10 piece minimum 1139-1* Pull - 6" ctc ADA 1139-2* Pull - 8" ctc ADA Special BTB Application Available *For finishes 605, 606, & 609 10 piece minimum 1150 1/2" dia. Pull - 6" ctc ADA 1151* 1/2" dia. Pull - 8" ctc ADA *Special BTB Application Available 1163 1" dia. Straight Door Pull - Solid Price By Quotation with 3/4" dia. Posts Rounded Ends - ADA 1163-1 1164 1164-1 1165 1" dia. Pull 3/4" Post Round ends - Tube- ADA Price By Quotation 1-1/4" dia. Straight Door Pull - Solid with 1" dia. Posts Rounded Ends - ADA Price By Quotation 1-1/4" dia Pull 1" Post Round end - Tube - ADA Price By Quotation 1-1/2" dia. Straight Door Pull with 1-1/4" dia. Posts Rounded Ends - ADA Price By Quotation Available With 3 CUVERRO PRICE LIST AS OF JULY 2014 TRIMCO 1170 Cat Sec. DESCRIPTION 1" dia. Door Pull Price By Quotation with Cast Offset Posts Square Ends - ADA 1171 1-1/4" dia. Door Pull with Cast Offset Posts Square Ends - ADA Price By Quotation 1172 1-1/2" dia. Door Pull - Solid with Cast Offset Posts Square Ends - ADA Price By Quotation 1-1/2" Offset Pull 1" Post Square End - Tube - ADA Price By Quotation 1" dia. Door Pull Price By Quotation 1172-1 1173 with Cast Offset Posts Rounded Ends - ADA 1174 1-1/4" dia. Door Pull with Cast Offset Posts Rounded Ends - ADA Price By Quotation 1175 1-1/2" dia. Door Pull with Cast Offset Posts Rounded Ends - ADA Price By Quotation Available With 1191-1 3/4" dia. 90º Offset Pull - 8" ctc ADA 150.00 D D 1191-2 3/4" dia. 90º Offset Pull - 10" ctc 170.00 D ADA D 1191-3 1" dia. 90º Offset Pull - 10" ctc 170.00 D ADA D 1191-4 1" dia. 90º Offset Pull - 12" ctc 160.00 D ADA D 1191-4J 1-1/4" dia. 90º Offset Pull - 12" ctc 380.00 D ADA D 1191-5 1" dia. 90º Offset Pull - 18" ctc 260.00 D ADA D 1191-5J 1-1/4" dia. 90º Offset Pull - 18" ctc 415.00 D ADA D 4 CUVERRO PRICE LIST AS OF JULY 2014 TRIMCO 1194-1 Cat Sec. DESCRIPTION 3/4" dia. Straight Pull - 6" ctc 50.00 D 60.00 D 65.00 D 75.00 D 60.00 D 100.00 D 110.00 D ADA 1194-2 3/4" dia. Straight Pull - 8" ctc ADA 1194-3 3/4" dia. Straight Pull - 10" ctc ADA 1194-4 3/4" dia. Straight Pull - 12" ctc ADA 1195-1 1" dia. Straight Pull - 8" ctc ADA 1195-2 1" dia. Straight Pull - 10" ctc ADA 1195-3 1" dia. Straight Pull - 12" ctc ADA 1195-3J 1-1/4" dia. Straight Pull - 12" ctc D ADA 1195-6 1" dia. Straight Pull - 18" ctc 150.00 D ADA 1195-6J 1-1/4" dia. Straight Pull - 18" ctc D ADA 1198-1 CuVerro Grab Bar 1562A Push/Pull Latch 12"-$155 30"-$191 48"-$293 18"-$167 36"-$204 24"-$179 42"-$248 See Left 440.00 C 462.00 C Both Levers Down 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. 1562AP Push/Pull Latch Both Levers Down - Engraved 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. 1562L 1562HL (Locking) Privacy Push/Pull Set 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. (Horizontal) Passage Push/Pull Set 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. ANTI-MICROBIAL COPPER CAN BE SUPPLIED ON PADDLES AND COVERS-CONTACT FACTORY 5 CUVERRO PRICE LIST AS OF JULY 2014 TRIMCO 1562Q55 Cat Sec. DESCRIPTION PDQ Mortise Push/Pull Lockset 907.50 C Both Levers Down 2-3/4" Backset ONLY ADA For the Mortise locks manufactured by other than PDQ or Corbin add $150.00 List Specify Handing, Backset and Strike when ordering. The 1562Q Series has a 2 year Limited Warranty. 1562M55 Corbin Mortise Push/Pull Lockset 950.00 Both Levers Down 2-3/4" Backset ONLY ADA For the Mortise locks manufactured by other than PDQ or Corbin add $150.00 List Specify Handing when ordering. 1562AE Exit / Entrance Latch 396.00 C 440.00 C 462.00 C 440.00 C 462.00 C Lever Down -Has Lever on ONE side ONLY 5" Backset and 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. 1563A Push/Pull Latch Both Levers Up 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. 1563AP Push/Pull Latch Both Levers Up - Engraved 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. 1580A Push/Pull Latch Push Lever Up / Pull Lever Down 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. 1580AP Push/Pull Latch Push Lever Up / Pull Lever Down - Engraved 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. ANTI-MICROBIAL COPPER CAN BE SUPPLIED ON PADDLES AND COVERS-CONTACT FACTORY If Substituting 4-7/8" Strike add $5.00 LIST. Add $100.00 List each for Lead Lined Escutcheon Plate (1592LLE) and/or Lead Lined Tube (1592LLT) 6 CUVERRO PRICE LIST AS OF JULY 2014 TRIMCO Cat Sec. DESCRIPTION PDQ Mortise chassis supplied as standard for the 1562Q series. Alternate chassis are available at an additional cost of $150 list and longer lead-time. 1581A Push/Pull Latch 440.00 C 462.00 C 418.00 C 440.00 C 450.00 E 490.00 E Push Lever Down / Pull Lever Up 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. 1581AP Push/Pull Latch Push Lever Down / Pull Lever Up - Engraved ADA Specify Handing, Backset and Strike when ordering. ANTI-MICROBIAL COPPER CAN BE SUPPLIED ON PADDLES AND COVERS-CONTACT FACTORY 1591A Reverse Push or Pull Latch Push Lever Down 5" Backset x 2-3/4" T-Strike (Standard) ADA Specify Handing, Backset and Strike when ordering. 1591AP Reverse Push or Pull Latch, Engraved ADA Specify Handing, Backset, Strike and whether it is a push or pull when ordering. The 1591's are made to order and may not be returned. 1643 5/8" dia. Push Bar Set 3 Bar Set Brackets - 5/8" x 8" 1644 5/8" dia. Push Bar Set 4 Bar Set Brackets - 5/8" x 11" CTC is required when placing order For finishes 605, 606, & 609 10 piece minimum 1661 1" dia. Push Bar 400.00 E 1662 1" dia. Push Bar 490.00 E 310.00 D 96.00 D 160.00 D 2 Bar Set ADA For finishes 605, 606, & 609 10 piece minimum 1802-4 Pull Plate 4" x 16" CTC is required when placing order with 6" CTC Pull (1"x3/8" bar) ADA 1807-4 Push Plate 4" x 16" with Rounded Bevel Top & Bottom Edges 1807-25 Push Plate 4" x 25" with Rounded Bevel Top & Bottom Edges 7 CUVERRO PRICE LIST AS OF JULY 2014 TRIMCO 1809-4 Cat Sec. DESCRIPTION Push Plate 4" x 16" 120.00 D Push/Pull Plate 3-1/2" x 16-1/2" 90.00 D Push/Pull Plate 8" x 16-1/2" 140.00 D Cylinder Pull 55.00 D 60.00 D D B4E 1820 1820-11 1822 2" x 3-3/4" 1822-1 Cylinder Pull No Cutout--Screw Mount 1822-2 Deadbolt Only 2-1/8" dia. Opening--Adhesive Mount Anti-Rotation Pin 75.00 1894-3 Push/Pull Plate Combo 260.00 3-1/2" x 15" with 3/4" dia. 6" ctc Pull with Rounded Bevel Top & Bottom Edges ADA 1894-3B Push/Pull Plate Combo 260.00 3-1/2" x 15" with 3/4" dia. 8" ctc Pull with Rounded Bevel Top & Bottom Edges ADA 1894-4 Push/Pull Plate Combo D 260.00 4" x 16" with 3/4" dia. 6" ctc Pull with Rounded Bevel Top & Bottom Edges ADA 1894-4B Push/Pull Plate Combo 300.00 4" x 16" with 3/4" dia. 8" ctc Pull with Rounded Bevel Top & Bottom Edges ADA 1895-3 Push/Pull Plate Combo 3-1/2" x 15" with 1" dia. 8" ctc Pull with Rounded Bevel Top & Bottom Edges 290.00 ADA 1895-3B Push/Pull Plate Combo 3-1/2" x 15" with 1" dia. 10" ctc Pull with Rounded Bevel Top & Bottom Edges 300.00 ADA 1895-4 Push/Pull Plate Combo 300.00 D 4" x 16" with 1" dia. 8" ctc Pull with Rounded Bevel Top & Bottom Edges ADA 8 CUVERRO PRICE LIST AS OF JULY 2014 TRIMCO 1895-4B Cat Sec. DESCRIPTION Push/Pull Plate Combo 310.00 4" x 16" with 1" dia. 10" ctc Pull with Rounded Bevel Top & Bottom Edges ADA 1896-4B Push/Pull Plate 4" x 16" Grip 10" CC 1" dia 330.00 with Rounded Bevel Top & Bottom Edges ADA Note: In addition to the unique products below, a large number of exterior pull handles and push/pull bar sets may be made to fOCAL styling. For handles, add $16.00 List each, for push/pull sets, add $32.00 List per set. Look for the fOCAL symbol. 3072 CuVerro Robe Hook 125.00 3080 CuVerro Double Toilet Paper Holder 389.15 3082 CuVerro Towel Bar and Shelf 7001 fOCAL Push Plate-4x16 1,560.00 70.00 A No Screw Holes x Adhesive Mounting 7009 fOCAL Push Plate-6x16 No Screw Holes x Adhesive Mounting 90.00 Note: fOCAL Products Are Made to Order and ARE NOT Returnable PBT8000-1 VD Snap on Exit Device Cover Qty: Stanley/Precision Snap on Exit Device Cover 1-47--$150 ea. 96-143--additional 5% discount 48-95-additional 3% discount over 144--additional 10% discount PBT8100 VD Trapeze Exit CuVerro Bar Replacement 360.00 9
© Copyright 2025 ExpyDoc