Wi-Fi® Corded Lamp Switch and Dimmer Description The Savant Wi-Fi Corded Lamp Switch (CLS-0WFXXX) and the Wi-Fi Corded Lamp Dimmer (CLD-0WFXXX) are wireless lamp modules designed to operate as part of a Savant SmartLighting system communicating via the Wi-Fi network. Without the need for additional highvoltage or control wiring, the CLD-0WFXXX easily acts in place of a standard in-wall dimmer for conventional floor and table lamps. Similarly, the CLS-0WFXXX acts in place of a standard in-wall light switch for conventional floor and table lamps, or electronic devices. A typical use case would be to have the lamp module— that is plugged into a wall outlet and connected to a floor lamp—be able to control and dim the load via WiFi communications. One lamp can be connected per unit. Both the dimmer and the switch must have a lighting controller: for example, an SSL-P018 or SSL-P002 (wired) via a network router, to operate correctly. A controller can support up to 50 CLS-0WFXXX or CLD-0WFXXX units. The Savant SmartConnect Accessory and the SmartConnect app enable the CLS-0WFXXX or CLD-0WFXXX to be configured with an iOS user interface. Feature Summary • Lamp module that functions as a dimmer or a switch within a SmartLighting configuration • Supports Wi-Fi™ (IEEE 802.11 b/g) • Ideal for retro-fit solutions where a re-wire is not feasible • Dimmers work with the following load types: incandescent, magnetic low voltage, or LED • Supports Ad Hoc Mode, DHCP, and static IP address assignment • Supports Android Virtual Device (AVD) • Supports WEP, WPA, WPA2 • Controlled by Savant Lighting app or Savant TrueControl app • White only, matte finish • Configure Wi-Fi using the Savant SmartConnect app and accessory, and an iOS device • Use LiteWare™ to configure lighting in Savant SmartLighting control system • Use RacePoint Blueprint™ design tool to integrate into Savant Systems Front of Wi-Fi Corded Lamp Switch or Dimmer (cord removed) Dimensions The next figures show the dimensions of a Savant Wi-Fi Corded Lamp Switch (CLS-0WFXXX) or Savant Wi-Fi Corded Lamp Dimmer (CLD-0WFXXX). Receptacle View Cord View without Faceplate 1 of 3 021014 009-1133-00 Wi-Fi® Corded Lamp Switch and Dimmer Specifications Environmental Temperature 32° to 104° F (0° to 40° C) Humidity 10% to 90% Relative Humidity (non-condensing) Dimensions Height 1.41 in / 3.6 cm Width 4.1 in / 10.4 cm Depth 4.1 in / 10.4 cm Power Supply 120 VAC 60 Hz | 240 VAC 50 Hz Load Power Maximum 700 Watts—or 6 Amps maximum (CLS-0WFXXX) | 550 Watts (CLD-0WFXXX) Wi-Fi Support 802.11 b/g WEP, WPA, WPA2 Ad Hoc Mode DHCP Static IP address assignment Compliance Safety and Emissions FCC Part 15 | CE Mark | C-Tick | UL RoHS Compliant Minimum Requirement: Release LiteWare 5.2.3 Regulatory The following statements are applicable to the CLS-0WFXXX or the CLD-0WFXXX. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications of this product, not approved by manufacturer will void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 2 of 3 021014 009-1133-00 Wi-Fi® Corded Lamp Switch and Dimmer Included Items The items included with the Savant Wi-Fi Corded Lamp Switch (CLS-0WFXXX) or Savant Wi-Fi Corded Lamp Dimmer (CLD-0WFXXX) are outlined in the next table. Description Quantity Power Cord C13 North America 6 feet 1 Metal Bracket 1 #2X.250 Tri-Lob Thread Form Screw 2 Quick Reference Guide 1 Required System Components The system components required for use with the Savant Wi-Fi Corded Lamp Switch (CLS-0WFXXX) or Savant Wi-Fi Corded Lamp Dimmer (CLD-0WFXXX) are outlined in the next table. Description Model Number Savant SmartLighting Controller WCC-2XXXXX, SSL-W002, SSL-P002 or SSL-P018 Ethernet Network Enterprise-grade network deployment Savant SmartConnect Accessory SCA-CONF or SCA-CONFL Savant SmartConnect app, refer to the iTunes® App Store for free download Optional System Component A system component that is optional for use with the Savant Wi-Fi Corded Lamp Switch (CLS-0WFXXX) or Savant Wi-Fi Corded Lamp Dimmer (CLD-0WFXXX) is outlined in the next table. Description Model Number Table Top Keypad KTP-03BW1 or KTP-03EW1 Copyright © 2014 Savant Systems, LLC. SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC. All brand names, product names and trademarks are the property of their respective owners. Savant Systems, LLC reserves the right to change product specifications without notice. 3 of 3 021014 009-1133-00
© Copyright 2024 ExpyDoc
