2014.04 HAR - ASHRAE Houston

Golden Gavel ’72-’73 James Beach
’12-’13 Alan Neely
Jack Thompson Award ’10-’11 Keith Reihl
’12-’13 Alan Neely
President’s Message
Who is loving the low dewpoints and
absolute humidity? I know I am! Our
weather has been fantastic, and I hope
you’ve been outside basking in it.
without crutches is like.
On a different note, I never knew how
simple and enjoyable walking could be
uninhibited. I broke my foot
snowboarding over spring break (I will
never learn!). And life on crutches has
been brutal! After 4 weeks I am having a
hard time remembering what walking
We have a great spring on tap. We start next Wednesday MORNING
with a commissioning panel of experts with our popular Q&A
format. We then move on to our world famous SPRING GOLF
Tournament on May 5th at Longwood Golf Club. It has been
rumored that Longwood is going to play host to the Shell Houston
Open in 2028 and potentially the US Open in 2040.
We have a strong contingency going to ASHRAE CRC this year. The
Arkansas chapter is going all out to make this the best CRC ever!
Look forward to seeing everyone at the next meeting, the SPRING
GOLF Tournament, and CRC.
Trivia Question: What is the significance of the
number 1130 to ASHRAE Golf Tournament? (The first
person to tell me will get a crisp $20 bill at the April
meeting).
Onward and Upward,
Mike Donovan / 2013-2014 ASHRAE Houston Chapter President
This Month’s Meeting
April 16, 2014
ASHRAE Breakfast Meeting
April 16, 2014
7:30 AM - 9:30 AM
HESS Building
5430 Westheimer Road
Houston, TX 77056
http://www.hessclub.com/
TOPIC: Panel Discussion on Commissioning
Costs:
Members: $25
Non-members: $35
Consulting Engineers Express Members: Free
Regular Express Members: Free
Breakfast Program:
The April 16, 2013 program will be a panel discussion on Commissioning - Where it
offers the most value and where it is most overrated. The panel speakers will be as
follows:
Justin Garner, P.E., LEED AP, CxA
Engineered Air Balance
Brian Ogle
Department of Facilities Planning, Design & Construction
MD Anderson
Jim Thornton, CxA, LEED AP
Senior Associate
CCRD
Format:
7:30-7:50 a.m. – Networking and Sign In and Start Breakfast Line
7:50-8:10 a.m. – Announcements
8:10 p.m. – 9:10 a.m. – Program/Presentation
9:10- 9:20 a.m. – Q&A
9:20 a.m. – conclude
Meeting Minutes
ASHRAE
Technology for a Better Environment
REGION VIII HOUSTON CHAPTER MEETING MINUTES
ASHRAE Mission: To advance the arts and sciences of heating, ventilating, air conditioning and refrigerating to serve
humanity and promote a sustainable world.
ASHRAE Vision: ASHRAE will be the global leader, the foremost source of technical and educational information, and the
primary provider of opportunity for professional growth in the arts and sciences of heating, ventilating, air conditioning and
refrigerating.
In Attendance (Meeting Held via conference call 03/20/14)
Mike Donovan / President / HTS Texas
Kimberly Thompson P.E./ Treasurer / HTS Texas
Bill Chalmers P.E. / Secretary / Johnson Controls
Alan Neely / Past President 2012-2013 / Pittsburgh Corning Insulation
Kenneth Shifflett P.E. / Student Activities / Distribaire, Inc.
Bruce Flaniken P.E. / Historian Emeritus / The Methodist Hospital
Kurt McCulloch / Membership / The Hunton Group
John Walik / HAR Editor - Webmaster / H.D. Grant Company, Inc.
Time Called to Order 4:00 pm / Time Called to End 4:30 pm
o
o
o
o
o
o
Mike Donovan / President:
April 16 breakfast meeting starts at 7:30 am and ends at 9:10. BOG meeting
starts immediately afterwards. Objective is to finish by 10:00 am. May meeting is
about large central plant uses including TECO, Enwave,Greenway Properties.
Golf tournament is on the web site. Course is being very accommodating. Mike
would like it to be as much fun as last year. Sponsorships are well subscribed
but companies are encouraged to participate.
April 10 or 11 CRC workshop is being scheduled for preparation of the chapter
presentations which include: PowerPoint of the years accomplishments Golden
Gavel submission Chapter executive summary report. Information must be
accurate to ensure the Regional Vice Chairs do not find faults.
Houston’s research goal is $63,000. $22,000 has been remitted.
Board must vote on the incoming board member at the next meeting.
Board must vote on the amount the chapter is submitting to research promotion
at the next meeting. Because the golf tournament is after CRC, it is difficult to
make a commitment to the final contribution.
Kimberly Thompson P.E. / Treasurer:
o The chapter finances are healthy. She pointed out that student night is an
expensive evening. The cost is approximately $3,000 with income of only
$1,100. The board should consider other venues for next week.
Kenneth Shifflett P.E. / Student Activities:
o Student night draws more people when held at St. Arnolds that when it is held at
Hess. Thirteen students attended. Five got scholarships. The students were
grateful. The chapter thanks Paul Alexander, Glenn Booker, Bruce Flaniken and
Steve Redding for their excellent presentations.
Bruce Flaniken P.E. / Chase Williamson / Historian:
o 700 PAOE points and meeting all MBOs.
Kurt McCulloch / Membership:
o No news this month.
Nick Badke E.I.T. / Product Roster & Directory:
o Director is being mailed next week.
o Discussion ensued regarding promoting sales of the directory to contractors.
Mike is emailing Paul Alexander asking how this can happen.
John Walik / BOG / Editor / Webmaster:
o Hot Air Recorder deadline is March 31.
Spring Golf Classic
Monday, May 5th
Shotgun Starts at 12:30!
Longwood Golf Club
13300 Longwood Trace
Cypress, TX 77429
For more info or to Register visit:
www.ashraehouston.org
Available Sponsorship Opportunities:
Tailgate Sponsor - $2,500 (6)
Dinner Sponsor - $1,500
Lunch Sponsor - $1000 - Straus
Koozie Sponsor - $750
Goodie Sponsor - $750
Luggage Tag Sponsor - $1500
Golf Ball Pouch Sponsor - $1000
Beverage Cart Sponsor - $2,000
Snack sponsor - $1000
Tiger hole Sponsor - $500
Flag Sponsor - $900
Tee Box Sponsor - $250
All Proceeds go to ASHRAE RESEARCH
Questions? Contact Michael Langton at 832-328-1010 x1106 or (832) 867-7149 (mobile)
[email protected]
Webinar
April 17, 2014
ASHRAE Webinar
April 17, 2014
12:00 PM - 3:00 PM Central Time
HTS Texas
3350 Yale Street
Houston, TX 77018
Buildings in Balance: IEQ and Energy Efficiency
ATLANTA – Registration for the free 2014 ASHRAE Webcast, “Buildings in Balance: IEQ and Energy Efficiency,”
is now open at www.ashrae.org/ieqwebcast.
The webcast will broadcast live on April 17, 2014, from 12-3PM CENTRAL TIME.
NOTE: IF YOU WISH TO WATCH THE WEBINAR AT HTS CALL 832.328.1010 AND RESERVE YOUR SPOT WITH THE
RECEPTIONIST. MAX ATTENDANCE IS 20.
“The webcast will identify the link between energy efficiency and indoor environmental quality (IEQ) through
the integrated design process,” Andy Cochrane, chair of ASHRAE’s Chapter Technology Transfer Committee,
which oversees the event, said. “Participants will be able to recognize the importance of the four cornerstones
of IEQ and explain how system selection can benefit energy efficiency and IEQ. The presenters will describe
best practices for performance measurement protocols and explain the role of post occupancy evaluation in
fine-tuning building performance. Viewers will also learn about the common design, commissioning and
operational pitfalls of IEQ. ‘Buildings in Balance’ will describe how energy and efficiency can be achieved,
without compromising IEQ.”
Webcast presenters are:
2013-14 ASHRAE President William P. “Bill” Bahnfleth, Ph.D., P.E., Fellow ASHRAE, ASME Fellow, professor of
Architectural Engineering , director of Indoor Environmental Center, The Pennsylvania State University
James W. Bochat, president, Commissioning Concepts, Phoenix, Ariz.
Tim McGinn, P.Eng., ASHRAE-Certified High Performance Building Design Professional, principal, DIALOG,
Calgary, Alberta, Canada
Jerry M. Sipes, Ph.D., P.E., vice president of engineering, Price Industries, Inc., Suwanee, Ga.
The IEQ Webcast has been approved for three Learning Units (LUs) by the American Institute of Architects
(AIA) and three Continuing Education Hours (CEs) by GBCI. The state of New York also recognizes AIA course
approval.
Visit www.ashrae.org/ieqwebcast for more information on the Webcast and continuing education credits, as
well as ASHRAE IEQ resources.
Bartos Industries
HVAC Sales Engineer - Houston
Career Opportunity
Bartos Industries has recently expanded to the Greater Houston Area. We recognize
people as our most valuable asset. We welcome talented individuals looking to further
their career and help Bartos in its continued success in the HVAC market.
Job Description/Requirements:
Bartos Industries is seeking an HVAC Sales Engineer for the Greater Houston
Area. Our sales team takes a counselor approach to sales. Therefore, candidates will
have a strong understanding of building and maintaining client relationships, and have
experience calling on mechanical engineers, architects, contractors and owners. The
ideal candidate will be a P.E., have 5+ years experience in generating basis of design
HVAC equipment specifications and possess outstanding verbal/presentation skills.
Bartos Industries has been in business since 1964 and is a well-respected source for
HVAC products in the Dallas-Fort Worth area and has expanded to Houston with
Product Lines that include: Samsung VRF Systems and Ductless Products; Modine
Dedicated Outside Air Systems and Unit Heaters; RenewAire Energy Recovery
Ventilators; Roberts Gordon Heating Products; American Cooling Towers; Dri-Steem
Humidifiers and much more.
Bartos Industries offers a competitive salary, bonus and benefits package.
Thank you for your interest in a career with Bartos Industries. If you would like to apply
for the Houston HVAC Sales Engineer Position please see below and submit your
resume for review.
Please send resumes to: [email protected]
Student Activities
ASHRAE Student Activities Update 03/31/2014
Submitted by Kenneth Shifflett, P.E. / Student Activities Chair
What an awesome student night we had at St. Arnold's Brewery a couple
weeks ago! There were 13 members of the Texas A&M ASHRAE student
branch, plus their faculty advisor Dr. Culp, in addition to the many local
Houston chapter members that enjoyed a night of good food,
tasty beverages, and networking. There were also tours of the unique
refrigeration system designed by our chapter’s own Steve Roche and Steve
donated several HVAC related books to the Texas A&M student
chapter. The Houston ASHRAE chapter awarded 5 scholarships to deserving
Texas A&M students. A special thanks to Elliot Millican for serving on the
scholarship review committee. Please see elsewhere in the HAR for a thank
you letter to the Houston chapter from the Texas A&M students.
Also a special thanks to our ASHRAE Houston past presidents, Bruce Flaniken,
Steve Redding, Paul Alexander, and Glenn Booker that spoke to the students
on the benefits of ASHRAE from the perspective of building owner,
MEP consulting engineer, mechanical contractor, and manufacturers
representative, respectively.
The Texas A&M ASHRAE chapter is planning to attend the ASHRAE summer
meeting in Seattle and are seeking funds for travel. If you are feeling
generous, please contact myself or the other ASHRAE board members.
As in years past my ongoing efforts will be to grow student interest in
ASHRAE within the local colleges (University of Houston, Rice, LoneStar
college, ect..) and increase chapter participation of K-12 activities and
involvement in Engineers Week. If anyone has contact information for
potential interest or involvement, please email me at
[email protected].
Please see the letter from TAMU ASHRAE Student Chapter on the following page…..
Last Month’s Meeting
Some photos taken at St. Arnold’s Brewery for ASHRAE
Houston Chapter Student Night….
Texas A&M Campus
History
What is now DBR was actually started by one man, David W. Day, way back in
1972. With a portfolio of K-mart stores and the like, David opened up his
engineering practice with one employee, his wife, as his bookkeeper. His
practice grew and in 1985 became Day Brown Rice, Inc., taking on partners Ron
Brown and James D. Rice. His project types at that time had broadened to
commercial, retail, educational, and liturgical, and the firm had multiplied to
thirteen people. In 2000 David, Ron, and Jim took on three more partners, and
changed the company name to DBR Engineering Consultants. Ron Brown and
Jim Rice have since gone their own ways and established successful companies.
At present date, DBR has 98 employees in five offices, Houston, San Antonio,
McAllen, Corpus Christi, and Austin, and seven partners, Randy Curry, Ayman
Ashkar, David Pruitt, Brian Ulrich, Brian Jenkins, Kevin Pfeiffer, and Carlo
Sechi.
Service, Quality, Integrity, and Sustainability are the pillars of DBR’s business,
and we continually strive to uphold these core values in all our work. We treat
our clients and our employees like we expect to be treated.
The firm has a healthy mix of project experience including Commercial Office
Buildings and Tenant Interiors, K-12, Higher Education, Laboratory,
Government, Hospitality, Liturgical, and Retail. Other services offered are
IT/Security Design, LEED® Consulting, and Building Commissioning. We have
engineered more than 60 LEED® projects, including Eagle Veterinary Hospital,
San Antonio’s first LEED Platinum facility.
We are especially proud of our recent work, the office buildings at Hughes
Landing and at the Woodlands Waterway, Energy Towers I, II, III, & IV, Texas
Instruments Sugar Land Campus, Fairway Pines/The Woodlands Conference
Center and Resort, Kelsey Seybold, Phase I of the Corps Dorm Renovation at
Texas A&M, Student Housing at UTSA and Baylor, and Cy-Fair Elementary #53.
Submitted By Chase Williamson / History Chairman
History Section
History Section
History Section
History Section
History Section
Membership
The American Society of Heating, Refrigerating and Air-Conditioning Engineers advances the
arts and sciences of heating, ventilation, air conditioning and refrigeration to serve humanity
and promote a sustainable world. Membership is open to any person associated with the field
including indoor air quality, building design and operation, and environmental control for
food processing and industry.
Membership in ASHRAE allows access to information about state-of-the-art HVAC&R
technology and provides many opportunities to participate in the development of that
technology. Participation is available locally, through chapters, and through membership on
Society committees, such as standards projects committees, which are responsible for the
development of standards, and technical committees which advise the Society on research
needs, emerging technologies, and technical matters.
To join renew or update your membership go to https://www.ashrae.org/ and look for the
Membership Tab on the top right side of the page.
New ASHRAE Houston Members for the April HAR Issue:
Submitted by Kurt McCulloch – Membership Chairman
Name
Company Or School
Affiliate: Member, YEA
or Student
Rufus Jackson
TIRR Memorial Hermann
Member
Carlanna Cunningham
Grundfos
YEA
Jeffrey Ryman, Jr
Automated Logic
YEA
Matthew Sullivan
MLN Company
YEA
Forrest Creasy
Baylor Scott & White
Member
Christopher Clifton
Grundfos
YEA
Adam Schwarz
Grundfos
YEA
Juan Contreras
DBR
Member
Wilfred Inko-Tariah
ASME, SAE
Member
Andrew Hohler
Kitz Corporation of America
YEA
Scott Eunson
The Cooling Tower Company
Member
Sustainability Corner
ANSI/ASHRAE/USGBC/IES Standard 189.1-2011: Standard for the Design of
High Performance, Green Buildings Except Low-Rise Residential Buildings –
The Building’s Impact on the Atmosphere, Materials, and Resources
Submitted By Keagan Cothern and Brian Dunne
The ninth section of ANSI/ ASHRAE/ USGBC/ IES Standard 189.1-2011 “Standard for the Design of HighPerformance Green Buildings” (commonly known as 189.1) is entitled “The Building’s Impact on the
Atmosphere, Materials, and Resources”. This section deals with proper waste management during construction,
use of refrigerants, recycling, and reduced impact materials.
Mandatory Provisions are those that apply to any project looking to comply with 189.1.
Section 9.3 “Mandatory Provisions” contains requirements for managing construction waste, materials used in
construction, refrigerants, and recycling. At least 50% of the non-hazardous waste produced during demolition
and construction must be recycled or reused. The goal of this requirement is to reduce the strain on landfills.
Total waste for new building projects is limited to 42 cubic yards or 12,000 pounds per 10,000 square feet of
new floor area. This requirement applies to the absolute total of all waste, whether it was diverted from landfills
or otherwise. Unless the wood being used is reclaimed, the building project may not use wood from endangered
wood species. There is an exception if the wood meets the requirements of the Convention on International
Trade in Endangered Species of Wild Fauna and Flora (CITES). The requirements for refrigeration are very simple:
no CFC based refrigerants are allowed in HVAC systems and no ozone-depleting substances (CFCs, HCFCs, or
Halons) allowed in fire suppression systems. 189.1 requires that the building project have a dedicated room for
the collection and storage of non-hazardous recyclables. This area should be designed to maximize the efficiency
and effectiveness of the recycling process and pickup services, but no specific requirements are designated in
the 2011 version of 189.1. Residential building projects shall have a single specific area with the purpose of
collecting unwanted items that are in good condition to be given to charitable organizations. One final area
designed for the collection and proper disposal/recycling of fluorescent and HID lamps and ballasts must be
provided to serve the building.
Prescriptive and Performance Options are either/or options that the project team can choose between. One or
the other path must be selected, but the project teams can chose which based on individual project goals.
Section 9.4 “Prescriptive Option” contains requirements for using reduced impact materials in the building’s
construction. The sum of post-consumer recycled materials and one half of the pre consumer recycled materials
must constitute a minimum of 10% of the cost of the total materials used in the project. It is important to note a
few things: components from mechanical, electrical, plumbing, fire safety, and transportation systems shall not
be included in the calculation except for piping, plumbing fixtures, ductwork, conduit, wiring, cabling, and
elevator and escalator framing. Additionally, it is acceptable to use 45% of the total construction cost instead of
the actual total material cost. At least 15% of the total building materials used, by cost, must be produced from
within a 500 mile radius of the project site. The goal of this requirement is to reduce the pollution created by the
vehicle transporting the materials. As such, materials that are shipped by the more efficient forms of
transportation (rail and water) are allowed to be shipped from further away than 500 miles. The portion of the
distance traveled on rail or water is multiplied by 0.25 and then added to the portion of the trip not provided by
rail or water, this combined total must still be less than 500 miles when calculated out. At least 5% of the cost of
building materials must be used to buy bio-based materials.
The “Performance Option” in section 9.5 is to perform a life cycle assessment (LCA) of the project building. Two
alternative designs must be modeled and assessed considering the materials designated in the prescriptive
option. Each modeled building must have a service life matching its type. A temporary building must last up to
10 years, a medium life building must last at least 25 years and a long life building (for this performance option
only) must last at least 75 years. The chosen design of the alternatives must have a 5% or greater advantage
over the others in at least two of the impact categories. The impact categories are as follows: land use, resource
use, climate change, ozone layer depletion, human health effects, eco-toxicity, smog, acidification, and
eutrophication.
Please note that there are exceptions and details associated with each category and option that we don’t have
room to talk about here. But we hope to give a general outline of the requirements within 189.1 so that our
readers will have a feel for the requirements if their clients ask about it. If interest is strong we may address
specific topics in more detail or attempt a side by side comparison between 189.1 and LEED. Next month we
plan on talking about Section 10: Construction and Plans for Operation.
For All Pictures
Origin of the phrase, “She put me through the wringer”
”Click
On The Photo Album to see all pictures”
For Release From Society National
For Release:
April 4, 2014
Contact: Jodi Scott
Public Relations
678-539-1140
[email protected]
ASHRAE Proposes to Move All Residential IAQ Requirements to Standard
62.2
ATLANTA – Dwelling units of multifamily buildings of any height would fall under
ASHRAE’s residential ventilation standard, 62.2, under a proposed change
designed to provide consistency of ventilation requirements.
Currently, ANSI/ASHRAE Standard 62.1-2013, Ventilation for Acceptable Indoor
Air Quality, has responsibility for multifamily residential buildings 4 stories or
more, while ANSI/ASHRAE Standard 62.2-2013, Ventilation and Acceptable
Indoor Air Quality in Low-Rise Residential Buildings, has responsibility for
residential buildings 3 stories and less.
“The Standards 62.1 and 62.2 committees are proposing scope changes that
would result in the dwelling units of all multifamily buildings being covered by
Standard 62.2,” Paul Francisco, chair of the Standard 62.2 committee, said.
“Common areas would be covered by 62.1. This will provide consistency of
ventilation requirements for dwelling units regardless of building height. For new
construction, this will result in a change of requirements for dwelling units in 4+
story buildings. For the retrofit market, this change will result in coverage by
ASHRAE ventilation standards for the first time in 4+ story buildings.”
The proposed changes are being made via addendum a to Standard 62.1-2013
and addendum g to Standard 62.2-2013, which are open for public review from
April 4 to May 4, 2014. For more information or to submit comments, visit
www.ashrae.org/publicreviews.
The ventilation rates for dwelling units in Standard 62.1 are different from the
rates in Standard 62.2, and this inconsistency has caused concern for some,
according to 62.1 committee chair Roger Hedrick. Additionally, Standard 62.1
does not address modest retrofits whereas Standard 62.2 does.
“The retrofit market is a major user of ASHRAE ventilation standards,” he said.
“This will allow for consistency across dwelling units and also allow application of
ASHRAE ventilation standards to the multifamily retrofit market.”
Francisco agreed, saying, “Given the growth of the retrofit industry in multifamily
dwellings it is important to ensure that these situations are covered in ASHRAE’s
ventilation standards.”
ASHRAE, founded in 1894, is a building technology society with more than
50,000 members worldwide. The Society and its members focus on building
systems, energy efficiency, indoor air quality, refrigeration and sustainability.
Through research, standards writing, publishing, certification and continuing
education, ASHRAE shapes tomorrow’s built environment today.
###
For Release:
April 10, 2014
Contact: Jodi Scott
Public Relations
678-539-1140
[email protected]
Supply Water Temperature Classification New Addition to Updated
Guidance on Cooling Data Centers
ATLANTA— Data center rack heat loads are steadily climbing, creating a need
for liquid cooling solutions to reduce the volume of airflow needed, as well as
lower processor temperatures for better computer performance. “Liquid Cooling
Guidelines for Datacom Equipment Centers,” second edition, recently published
by ASHRAE, provides best practice guidance for implementing liquid cooling
systems in data centers.
“There is an increasing interest in liquid cooled IT equipment at the rack,
equipment and component levels,” Don Beaty, publication chair of Technical
Committee 9.9., Mission Critical Facilities, Data Centers, Technology Spaces and
Electronic Equipment, said. “There is also increased interest in reuse of the heat
rejected from IT equipment. One of the more important changes to the second
edition is the addition of supply water temperature classification.”
Beaty claims that the addition of liquid classes can have a similar effect on the
industry as the creation of supply air temperature classes did—which was the
critical enabler to the use of economizers in data centers.
“There are five water temperature classes with the highest temperature class
being >45 C (113 F), which opens up possibilities for using the rejected heat for
building heating systems,” he said.
The guide bridges the liquid cooling systems by providing guidelines on interface
requirements between the chilled-water system and the technology cooling
system and on the requirements of liquid-cooled systems that attach to a
datacom electronics rack to aid in data center thermal management.
Also included are updated references and further information on approach
temperatures and liquid immersion cooling, plus guidance on water quality
problems and wetted material requirements.
Additionally, the guide covers definitions for liquid and air cooling as they apply to
IT equipment, along with an overview of chilled-water and condenser water
systems and other datacom equipment cooling options.
This book is the fourth in the ASHRAE Datacom Series, authored by ASHRAE
TC 9.9.
The cost of “Liquid Cooling Guidelines for Datacom Equipment Centers,” second
edition, is $54 ($46 ASHRAE members). To order, contact ASHRAE Customer
Contact Center at 1-800-527-4723 (United States and Canada) or 404-636-8400
(worldwide), fax 678-539-2129, or visit www.ashrae.org/bookstore.
ASHRAE, founded in 1894, is a global society advancing human well-being
through sustainable technology for the built environment. The Society and its
more than 50,000 members worldwide focus on building systems, energy
efficiency, indoor air quality, refrigeration and sustainability. Through research,
standards writing, publishing, certification and continuing education, ASHRAE
shapes tomorrow’s built environment today. More information can be found at
www.ashrae.org/news.
###
2014 Past Presidents Night Sponsors
Bartos Industries
Burner Combustion Systems
Carrier
Cougar Sales
Diffusion Components
Distribaire
Dynamic Systems, Inc.
Flexmaster
HD Grant Company
HTS Texas
Hunton Trane
JL Powell & Associates
Oslin Nation
Ramsey & Company
Mitsubishi Electric
Roessler Equipment
Straus Systems
Taxman and Associates
Texas AirSystems
Tillman & Associates
United A/C Supply
Vicon Equipment
The ASHRAE Houston Chapter Greatly
Appreciates The Patronage Of Our
Supporting Membership
TableTop Sponsors
August
AIR FILTERS, INCORPORATED
September
BARTOS INDUSTRIES
October
LASHLEY & ASSOCIATES, INC.
November
HTS Texas
December
No Meeting - Get Under the MistleToe
January
Past Presidents and Casino Night
February
ENCEPTIA
March
Open The Books For Student Night
April
BARTOS INDUSTRIES
May
POWER VAC AMERICA
It's Only $150 Clams.
Call Walik To Participate.
Dun did fill'er up...
ASHRAE Houston Chapter Roster
Position
President
Name
Mike Donovan
TelePhone
(832) 328-1010
President Elect
Elliot Millican
(713) 580-8817
Vice President
Michael Langton
(832) 328-1010
Treasurer
Kimberly Thompson
(832) 328-1010
Secretary
Bill Chalmers
(713) 924-2417
Alan Neely
(281) 432-9864
Technology Transfer
Elliot Millican
(713) 580-8817
Resource Promotion
Michael Langton
(832) 328-1010
Programs
Elliot Millican
(713) 580-8817
"R" in ASHRAE
Steve Roche
(281) 292-6842
Honors & Awards
Bryan Bagley
(713) 237-8900
Chase Williamson
(832) 342-7004
Bruce Flaniken
(713) 441-9624
Nick Badke
(713) 237-9800
Past President 2012-2013
Historian
Historian Emeritus
Roster & Product Directory
Education & Student Activities Kenneth Shifflett
Advocacy
(713) 266-1761
Jerry Garcia
(713) 780-7563
Membership Promotion
Kurt McCulloch
(713) 328-3775
Membership Promotion
Xuan Le
(281) 676-2444
Chaplain
Don Nye
(713) 580-8870
Chaplain Emeritus
Hank Fry
(713) 774-4922
Sustainability
Brian Dunne
(713) 933-1001
Sustainability
James Principe
(713) 237-9800
Young Engineers In ASHRAE
Brennan Vierra
(832) 328-1010
Young Engineers In ASHRAE
Cory Detten
(713) 237-8900
Board of Governors
Alan Neely
(281) 432-9864
Board of Governors
Don Nye
(713) 580-8870
Board of Governors
John Walik
(713) 462-8888
Attendance & Reception
Brandon Williams
(713) 983-6500
Attendance & Reception
Misty Wilson
(832) 328-1010
C.I.C Delegate
Keith Reihl
(713) 459-1044
C.I.C Delegate
Bruce Flaniken
(713) 441-9624
C.R.C. Delegate
Elliot Millican
(713) 580-8817
C.R.C Alternate
Michael Langton
(832) 328-1010
PAOE Administrator
David Schurk
(832) 328-1010
Photographer
Skip Williams
(713) 782-2701
Photographer
Valerie Roberts
(281) 500-8136
Editor, Hot Air Recorder
John Walik
(713) 830-4523
Webmaster
John Walik
(713) 830-4523

Download Report