RAIL PRODUCTS GDT Surge Protectors Novaris GDT surge protectors provides a means to electrically clamp different earthing systems together during transient disturbances, thereby limiting the damaging potential differences normally seen during a surge. Once the disturbance has passed the earth clamp will automatically reset and electronic systems can return to normal operation, thereby minimising costly GDT-100-350-RPU downtime. IEC Electrical Specifications Connection Type Shunt Active element Gas Discharge Tube (GDT) DC spark over voltage Uc Voltage tolerance 350V ± 20% Discharge current 8/20µs Imax Voltage Protection @ 3kA (8/20µs) UP 100kA <1.5kV Isolation resistance >1010Ω Capacitance <10pF Mechanical Specifications Operating temperature / humidity Connection type -40 to +65ºC / 0 to 90% non-condensing M10x1.5 theaded shaft, M10 cable lug Environmental IP 20 Weight 180g Standards Compliance AS/NZS 1768 IEEE C62.41 Dimensions BS 6651 Width 72mm CP 33 Height 16mm IEC 61643 Depth 25mm www.novaris.com.au Email: [email protected] Telephone: +61 3 6229 7233
© Copyright 2024 ExpyDoc