VALIANT COMMUNICATIONS VCL-4 E1 + Ethernet PDH Optical Multiplexer Data Sheet U.K. U.S.A. INDIA Valiant Communications (UK) Ltd 1, Acton Hill Mews, 310-328 Uxbridge Road, London W3 9QN, United Kingdom Valcomm Technologies Inc. 4000 Ponce de Leon, Suite 470 Coral Gables, FL 33146 U.S.A. Valiant Communications Limited 71/1, Shivaji Marg, New Delhi - 110015, India Copyright: Valiant Communications Limited - 2014 1 VCL-4 E1 + Ethernet PDH Optical Multiplexer Product Overview VCL-4 E1 + Ethernet PDH Optical Multiplexer is a point to point high performance optical line transmission equipment, combines 4, ITU-T G.703 compliant standard electrical E1s plus 100BaseT ethernet signal into an optical data stream for transport over fiber optic pairs. Several transmitter options for different cable types and wave-lengths are available. 1+1 optical path redundancy is offered and available as an option. Features and Highlights Integrated E1 Plus Ethernet Optical Multiplexer ! Compact design that performs E1 and Ethernet channel multiplexing & de-multiplexing to an ! optical output Provides visible and audible alarm indication ! Provide Remote power detection (RPD) ! Low power consumption ! Orderwire (EOW) channel for end to end installation and maintenance ! Local and remote loop back test for diagnostics ! 1+1 Fiber Path protection ! ALS (Auto Laser Shutdown) facility for eye safety ! 10/100M Ethernet Port - 100 Mbps Ethernet data transmission rate complies with IEEE8 02.3 ! Supports auto negotiation and flow control (pause) ! Clock options: internal/loop-timed ! Provides visible and audible alarm indications ! Local & remote loopback controls for diagnostics and troubleshooting ! Local configuration management through RS232 Serial Port ! Provide a customer RS232 transparent data channel upto 115.2 Kbps ! Remote configuration and management through 10/100BaseT Ethernet Port - Telnet (english ! text commands) SNMP (V1 and V2C). ! Application Diagram 4 E1s+1, 10BaseT Ethernet 1+1 Protection on Optical Path VCL-4 E1 + Ethernet PDH Optical Multiplexer (Local) Copyright: Valiant Communications Limited - 2014 4 E1s+1, 10BaseT Ethernet VCL-4 E1 + Ethernet PDH Optical Multiplexer (Remote) 2 VCL-4 E1 + Ethernet PDH Optical Multiplexer Technical Specifications E1 Interface Electrical Interface Channel Capacity Bit Rate Line Code Frame Structure Electrical Interface Nominal Impedance Jitter Character Connectors E1 Upto 4E1 2.048 Mbps + 50 ppm HDB3 As per G.704 As per G.703 120 Ohms balanced / 75 Ohms unbalanced (optional) ITU-T G.742, G.823 compliant DB37 interface with RJ-45 connectors (120 Ohms balanced) DB37 interface with BNC coaxial connectors (75 Ohms unbalanced) Optical Interface Type of Transmitter Class 1 Laser Transmitter power >- 3dBm, >- 6dBm, >- 9dBm options, as ordered Bit rate 155 Mbps Wavelength 850/1310/1550nm (optional) Optical connector FC/PC Receiver Sensitivity < - 36 dBm Typical output power > -9dBm Fully Compliant with ITU-T G.957, G.958 Specification Class 1 Laser Product, Compliant with IEC 60825-1 Compliant with Telcordia (Bellcore) GR-468-CORE Safety Class 1 Laser Auto Laser Shut Down in the event of fiber break. Ethernet Interface 10/100BaseT (optional) Number of Interfaces Interface Compliance Interface Rate Connector Flow Control 1 RJ45 Ethernet 10BaseT or 100BaseT-TX (auto sensing) Ethernet Version 2.0 IEEE802.3 10Base-T & 100Base-TX Activity, Full/half duplex. 100 Mbps Ethernet data transmission rate RJ-45 Pause Copyright: Valiant Communications Limited - 2014 3 VCL-4 E1 + Ethernet PDH Optical Multiplexer Order Wire Interface Phone set Bandwidth Coding Standard 2-wire phone set 64Kb/s PCM RS232 Interface Bit Rate Data Width Stop Bit Parity Check Bit Connector 9600b/s 8 Bits 1 Bit None DB9 System Management and Access Windows XP and Windows 7 compatible Graphical User Interface (GUI) Telnet - CLI (Command Line Interface) SNMP V2 (MIB File provided with the equipment). Management and Control Ports Serial Management Port (RS232) - COM Port 10/100BaseT for remote management over a LAN / TCP/IP network. Power Supply Power Input DC Power AC Power Power Consumption AC, DC, AC + DC DC - 48V (-36~-72V) / DC 24V Optional AC 220V (100~240V) 12 Watts Maximum Environment Temperature Humidity 0 0 - 5 C ~ + 55 C for operation - 400C to + 700C for storage 5% to 95% (350C) - non-condensing Mechanical Width Depth Height Weight Rack Type 434 mm 155 mm 44 mm 2 kg. EIA 19-Inch Copyright: Valiant Communications Limited - 2014 4 VCL-4 E1 + Ethernet PDH Optical Multiplexer Ordering Information VCL-4E1 + Ethernet PDH Optical (1+1) Multiplexer without PSUs S. No. 1 Part No. 2041:1-4E1-120-ETH -1310SM-040 2 2041:1-4E1-075-ETH -1310SM-040 3 2041:1-4E1-120-ETH -1550SM-080 4 2041:1-4E1-075-ETH -1550SM-080 Description Remarks VCL-4E1 + Ethernet PDH Optical (1+1) Multiplexer CORE 19" Metal box / case 1U High Rack Mount Version UNIT Without Supports: PSUs - 4 x E1 [120 Ohm DB37 (M)] - 1 x Ethernet [100Mbps, Electrical RJ45 (F)] - 2 x Optical [155Mbps, Duplex FC, 1310nm, 40Km, Single-Mode, Dual-Fiber - 1 x System Core Cables, Installation accessories, Documentation, System User Manual / Disk etc (Set) - OAM: EOW (order wire), SNMP, NMS & Telnet * Add Power Supply Option from below VCL-4E1 + Ethernet PDH Optical (1+1) Multiplexer 19" Metal box / case 1U High Rack Mount Version Supports: - 4 x E1 [75 Ohms DB37 (M)] - 1 x Ethernet [100Mbps, Electrical RJ45 (F)] - 2 x Optical [155Mbps, Duplex FC, 1310nm, 40Km, - Single-Mode, Dual-Fiber] - 1 x System Core Cables, Installation accessories, Documentation, System User Manual / Disk etc (Set) - OAM: EOW (order wire), SNMP, NMS & Telnet * Add Power Supply Option from below VCL-4E1 + Ethernet PDH Optical (1+1) Multiplexer 19" Metal box / case 1U High Rack Mount Version Supports: - 4 x E1 [120 Ohms DB37 (M)] - 1 x Ethernet [100Mbps, Electrical RJ45 (F)] - 2 x Optical [155Mbps, Duplex FC, 1550nm, 80Km, Single-Mode, Dual-Fiber] - 1 x System Core Cables, Installation accessories, Documentation, System User Manual / Disk etc (Set) - OAM: EOW (order wire), SNMP, NMS & Telnet * Add Power Supply Option from below VCL-4E1 + Ethernet PDH Optical (1+1) Multiplexer 19" Metal box / case 1U High Rack Mount Version Supports: - 4 x E1 [75 Ohms DB37 (M)] - 1 x Ethernet [100Mbps, Electrical RJ45 (F)] - 2 x Optical [155Mbps, Duplex FC, 1550nm, 80Km, Single-Mode, Dual-Fiber] - 1 x System Core Cables, Installation accessories, Documentation, System User Manual / Disk etc (Set) - OAM: EOW (order wire), SNMP, NMS & Telnet * Add Power Supply Option from below Copyright: Valiant Communications Limited - 2014 5 VCL-4 E1 + Ethernet PDH Optical Multiplexer Power Supply Option S. No. 1 2 3 Part No. AC220 DC048 ACDC Description 1 x 100-240V AC Power Supply Input 1 x (-) 48V DC Power Supply Input 1 x 100-240V AC Power Supply Input 1 x (-) 48V DC Power Supply Input Remarks Any one Option Cables and Accessories Options S. No. 1 2 2 Part No. VCL-HRNS 1260 VCL-HRNS-1245 VCL-HRNS 1240 3 VCL-HRNS 1242 4 VCL-HRNS 1276 5 VCL-HRNS 1243 6 VCL-HRNS 1257 7 8 9 VCL-ECON 1173 VCL-ECON 1187 VCL-ECON 1198 Description 4E1 120 Ohm Connectorized Cable [DB37F-4RJ45F] 4E1 75 Ohms Connectorized Cable [DB37F-8BNCF] Optical Patch Cord Connectorized Cable [FC-FC, 10m, SM] Optical Patch Cord Connectorized Cable [FC-LC, 10m, SM] Optical Patch Cord Connectorized Cable [2FC-2FC, 10m, SM] Optical Patch Cord Connectorized Cable [2FC-2LC, 10m, SM] Optical Patch Cord Connectorized Cable [2FC-2SC, 10m, SM] Connector (Attenuator LC-LC (20 db.)) Connector (Attenuator FC-FC (20 db.)) Connector (Attenuator SC-SC (20 db.)) Remarks As per Site require ment. Technical specifications are subject to changes without notice. All brand name and trademarks are the property of their respective owners. Revision 10 - March 05, 2014 U.K. U.S.A. INDIA Valiant Communications (UK) Ltd 1, Acton Hill Mews, 310-328 Uxbridge Road, London W3 9QN, United Kingdom Valcomm Technologies Inc. 4000 Ponce de Leon, Suite 470 Coral Gables, FL 33146 U.S.A. Valiant Communications Limited 71/1, Shivaji Marg, New Delhi - 110015, India Copyright: Valiant Communications Limited - 2014 6
© Copyright 2024 ExpyDoc
