8 7 6 4 5 ECO REV 10179 E 1 2 3 DESCRIPTION DATE 14-Apr-2014 ANGULARITY ADDED; KNURL DIMN & TOLERANCE ADJUSTED PIN INSERTION INCLUDED ANGLE OF 1.0° MAX OFFSET FROM CL F F 2.39±0.03 .094±.001 MATING PIN DIAMETER INCLUDING PLATE 2.54 .100 TOP PIN LEAD-IN 5.3 .21 5.5 .22 MINIMUM FULL DIAMETER PIN ENGAGEMENT INSIDE TOP SURFACE METHODE PINS HAVE OPTIMUM LEAD-IN GEOMETRY FOR ENGAGEMENT E E 13.2 .52 5.673±0.025 .2233±.0010 3.2 .13 OR GREATER BEST MECHANICAL RESTRAIN STRAIGHT KNURL PRESS-FIT PRESS-FIT HOLE 5.595±0.013 .2203±.0005 SEE NOTE 5 4.2 .16 30.0° 7.2 .28 D 1.0 .04 0.35 .014 0.25 .010 2.59 .102 BOTTOM PIN LEAD-IN DIAMETER D CL EBC INSTALLATION PRESS-IN DIRECTION C C CL INSTALLATION PRESS SURFACE METHODE PINS HAVE OPTIMUM LEAD-IN GEOMETRY FOR ENGAGEMENT NOTES: B 13.0 .51 MINIMUM FULL DIAMETER PIN ENGAGEMENT INSIDE BOTTOM SURFACE EBC 2.4 MM PB SOCKET PN: 1101-06638-01104 UNLESS OTHERWISE SPECIFIED 1. CONTACT NAME AND PART NUMBER: NAME: EMBEDDED BUSBAR CONNECTOR (EBC) POWERBUD® SIZE 2.4 MM PART NUMBER: 1101-06638-01104 B 2. MATERIALS: SOCKET CONTACTS: COPPER ALLOY SOCKET BODY: COPPER ALLOY FLANGE / FERRULE: COPPER ALLOY EBC PART NUMBER LISTED IN NOTE 1 & DRAWING NUMBER BELOW IN TITLE BLOCK 3. FINISHES: SOCKET CONTACTS: SILVER PLATING OVER NICKEL UNDER PLATING SOCKET BODY: SILVER PLATING OVER NICKEL UNDER PLATING FLANGE / FERRULE: NICKEL PLATING A NAME THIRD ANGLE PROJECTION 4. REFERENCE DIMENSIONS IN PARENTHESIS (X.XX) ARE WITHOUT TOLERANCE AND USED FOR INFORMATION ONLY. TOLERANCES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: 5. PRESS-FIT HOLE DIMENSION SHOWN PROVIDES A 0.08 MM [.003"] NOMINAL DIAMETER INTERFERENCE FOR USE IN SOLID COPPER INSTALLATIONS ONLY. THESE VALUES ARE GUIDLINES. ACTUAL CONDUTOR THICKNESS HOLE DIAMETER AND LEAD IN SHOLD BE CHARACTERISED BY THE USER FOR THEIR PARTICULAR APPLICATION. DECIMALS X.X 0.2 X.XX 0.08 X.XXX 0.013 SURFACE FINISH: N/A 8 7 6 5 4 ANGLES 2.0 ORIG: R. Larsen 03/19/2009 ENGR: R. Larsen 03/19/2009 CHECKED: H . Han 12/09/2009 PROPRIETARY AND CONFIDENTIAL NOTICE ALL INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY INFORMATION AND IS NOT TO BE DISTRIBUTED, COPIED, OR SHARED EXCEPT WITH PRIOR WRITTEN APPROVAL OF METHODE ELECTRONICS, INC. POWER SOLUTIONS GROUP. 3 METHODE ELECTRONICS, INC. POWER SOLUTIONS GROUP DATE 1750 Junction Avenue, San Jose, CA 95112 (408) 453-9500 TITLE: USER DRAWING, EBC PB SIZE 2.4 MM PIN STRAIGHT KNURL SIZE DRAWING NUMBER: C REV C1101-06638-01104 SCALE: 5:1 2 FILENAME: A E SHEET 1 OF 1 1101-06638-01104 1
© Copyright 2024 ExpyDoc
