Recessed Wall Lights Block/Brick 100W Max. HID

9630/9640
CATALOG
NUMBER
Recessed Wall Lights
Block/Brick
100W Max. HID
NOTES
TYPE
DESCRIPTION
These unique recessed wall lights provide lighting performance never before available. State-of-the-art glare
control modular technology together with a stunning
look make this series desirable for many applications.
These units are designed for mounting in block or brick
walls and are suitable for wet locations. The lamp module
and power modules are factory sealed and connected
by a water tight connector. Round or square models are
standard with a choice of trim styles.
Specifications
L:
See Diagram To Right
W:
See Diagram To Right
H:
See Diagram To Right
EXAMPLE: 9600 A 100M 120 HW P FBX SF LP BZ
ORDERING INFORMATION
9630
A
100M
120
HW
Model
Material
Lamp Type
Voltage
Distribution
9630
Square
A
Aluminum
INCANDESCENT
9640
Round
B
Bronze
50I
A-19, Med. Base
MH
100I
A-19, Med. Base
1
120
HN
Horizontal Narrow
35CMT6
T6, G12
208
HNL2
Horizontal Narrow, Left
70CMT67
T6, G12
220
HNR2
Horizontal Narrow, Right
QUARTZ HALOGEN1
50M8
E-17, Med. Base
240
HW
Horizontal Wide
100Q
70M7
E-17, Med. Base
277
HWLD2
Horizontal Wide, Left
COMPACT FLUORESCENT
100M
E-17, Med. Base
347
HWRD2
Horizontal Wide, Right
9DTT
G23 2-pin
HPS
13DTT
GX24Q-1 4-pin
35S1
E-17, Med. Base
MVOLT
(120-277)
26TRT
GX24Q-3 4-pin
50S6
E-17, Med. Base
32TRT
GX24Q-3 4-pin
70S
E-17, Med. Base
100S
E-17, Med. Base
T-4 mini-can
34B
P
SF
LP
BZ
Conduit Entries
Trim
Options
Lamp
Finish5
12B
Two 1/2” NPT Back
P
Plain bezel
Fusing
12S
Two 1/2” NPT Sides
E
Eyelid
SF3
34B
Two 3/4” NPT Back
G
Grill
34S
Two 3/4” NPT Sides
LLV
Louver
DF4
BL
Black
Single
Fusing
LP
BZ
Bronze
DDB
Dark Bronze
Double
Fusing
DNA Natural Aluminum
Lamp Installed
Ballasting
GEB
9
Electronic
Ballast
GN
Green
GR
Gray
SND
Sand
STG
Steel Gray
TVG
Terra Verde Green
WH
White
CF
Custom
__Z13 Zinc Undercoat (i.e. BLZ)
TRIM OPTIONS
L LOUVERS
Notes:
1 Available in 120 Volt only.
2 Recommended for stair or ramp applications only.
3 SF is only available with 120, 277 or 347 volts on HID only.
4 DF is only available with 208, 220 or 240 volts on HID only.
5 Finish is only available on fixtures with aluminum material.
6 Only available in 120 or 277 Volts.
7 Not available in 220 Volt.
8 Only available in 120, 277 or MVOLT.
9 Only available with MH Lamps.
10 Add Zinc undercoat for harsh environments.
G GRILLS
E EYELIDS
NOTE: Hydrel Reserves The Right To Modify Specification Without Notice. Any dimension on this sheet is to
be assumed as a reference dimension: “Used for information purposes only. It does not govern manufacturing or inspection requirements.” (ANSI Y14.5-1973)
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014 Acuity Brands Lighting, Inc.
6/13/14
9630_9640_BB
FEATURES & SPECIFICATIONS
MATERIAL: Cast aluminum or bronze trim is standard with integral lamp module assembly.
VOLTAGE: See ordering guide.
ROUGH-IN SECTION: Formed from ABS polymer with cast aluminum or bronze front mount ring.
The integrally molded J-box is larger than standard, with 40 cubic inches (655 cm3) of volume. Two
conduit entries are provided with back and side holes available.
DISTRIBUTION: See ordering guide.
GLARE CONTROL: Distributions come standard with Glarefoil, an internal micro louver
screen developed to provide sharp cutoff.
LAMP MODULE: Heavy wall Hydro-formed aluminum reflector housing that is factory sealed and
purged of all moisture. A custom silicone gasket seals the module. The water tight disconnect
connector is integral with the lamp module and sealed using epoxy encapsulation.
ACCESSORIES: Trim options include: P-plain, E-eyelid, G-rock guard, LLV-louvered.
POWER MODULE: Triple sealed encapsulated ballast system is easily installed in rough-insection and attached to lamp module with quick disconnects. High power factor HID and
Fluorescent ballasts are standard.
LISTING: U.L., CSA
FINISH: Super durable Polyester TGIC powder coat finish (standard). Optional Zinc
undercoat for harsh environments.
LAMP: Incandescent: A-19 lamp to 100 W,
Quartz Halogen: T-4, mini-can to 100W.
Fluorescent: Compact twin tube lamps to 13W, triple tube lamps to 32 W.
HID: E-17 lamps to 100W, T-6 G-12 lamps to 70W.
SOCKET:
Incandescent: Medium base
Quartz Halogen: Mini-can base
Fluorescent: 2-pin or 4-pin
HID: Medium base or G12 bi-pin
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014 Acuity Brands Lighting, Inc.
6/13/14
9630_9640_BB

Download Report