D es c r iption Eon 303-P1 is a compact, low profile, dimmable, fixed, ground mounted LED pathway luminaire. It provides downlight only via a fixed head. Eon mounts directly to an ingrade junction box (supplied by others) and comes standard with a universal input LED driver (120 - 277V, 50/60 Hz). Dimming is achieved with a standard ELV, reverse phase dimming driver or an optional 0 - 10V dimming driver. Eon fixtures may be used indoors or outdoors and carry an IP66 rating. Catalog # Type Project Comments Date Prepared by Spe c ific a tion F ea t u r e s Material The Luminaire is precision machined from corrosion-resistant 6061-T6 aluminum, Consult factory for additional premium material options. Finish Fixtures constructed from aluminum are double protected by a RoHS compliant chemical film undercoating and polyester powdercoat paint finish, surpassing the rigorous demands of the outdoor environment. A variety of standard colors are available. Aluminum fixtures can also be brushed and clear coat painted. Brass, Bronze, Copper or Stainless Steel Fixtures constructed from brass, bronze, copper or stainless steel are left unpainted to reveal the natural beauty of the material. Brass, bronze and copper will patina over time. Gasket A gasket is provided around 1/2 NPSM threaded stem to prevent water intrusion into jbox (supplied by others). Lens Clear, tempered glass lens, factory sealed with high temperature adhesive to prevent water intrusion and breakage due to thermal shock. EDGE LIT option: when specified with the EDGE option, the glass will be slightly thicker, clear, tempered and sealed in the same manner referenced above. The added glass thickness will offer a brighter line of light around the edge of the glass that will accentuate the fixture’s aesthetics and styling. Diffused, tempered glass lens, factory sealed with high temperature adhesive to prevent water intrusion and breakage due to thermal shock. Mounting Eon 303 - P1 mounts directly to an ingrade junction box (supplied by others) via 1/2 NPSM threaded stem. Hardware Stainless steel hardware is standard to provide maximum corrosion resistance. Electrical Eon 303 - P1 comes standard with a universal input LED driver (120277, 50/60Hz). The standard driver is ELV reverse phase dimmable. An optional 0 - 10V dimming driver is also available. LED LEDs are included and available in three color temperatures (2700K, 3000K & 4000K) and a variety of optics. Both color temperature and distribution must be specified when ordering - see reverse side for details and catalog logic. Labels & Approvals UL and cUL listed, standard wet label. IP66 rated. Warranty Lumiere warrants it’s fixtures against defects in materials & workmanship for five (5) years. Auxiliary equipment such as transformers, ballasts and LED drivers carry the original manufacturer’s warranty. 303-P1 8.8W LED LED Dimens ions Pathway 3.25” 83mm 4.75” 121mm 0.85” 21mm IP66 12.00” 305mm 18.00” 457mm 24.00” 609mm ADL121467 2014-1-27 12:34:36 L ED inf or m a tion LED Watts Beam Spread CBCP* °K Life (hrs.) Volts T2, 2700K 8.5 Type II - Lateral Throw 478 2700 50000 120V - 277V, 50/60 Hz T2, 3000K 8.5 Type II 514 3000 50000 120V - 277V, 50/60 Hz T2, 4000K 8.5 Type II 724 4000 50000 120V - 277V, 50/60 Hz T4, 2700K 8.5 Type IV - Forward Throw 419 2700 50000 120V - 277V, 50/60 Hz T4, 3000K 8.5 Type IV 489 3000 50000 120V - 277V, 50/60 Hz T4, 4000K 8.5 Type IV 688 4000 50000 120V - 277V, 50/60 Hz T5X, 2700K 8.5 Type V - Flood 467 2700 50000 120V - 277V, 50/60 Hz T5X, 3000K 8.5 Type V 503 3000 50000 120V - 277V, 50/60 Hz T5X, 4000K 8.5 Type V 708 4000 50000 120V - 277V, 50/60 Hz Notes a nd F or m ul a s • Apply appropriate light loss factors where necessary. • Photometry is LM-79 compliant. *All test data performed using 4000K color temperature - 2700K and 3000K are calculated from 4000K. Or der ing infor m a tion Sample Number: 303 - P1 - LEDB1 - 3000 - UNV - T5X - BK Color Temperature 2700= 2700K 3000= 3000K Series 303-P1 = LED single head adjustable ground mount 4000= 4000K Optics T2 = Type II, Lateral Throw T4 = Type IV, Forward Throw T5X = Type V, Extra Wide Flood Consult Factory for Other Optics Quantity of Mini Lightbars LEDB1 = Light Emitting Diode, Rev B., Single Mini Lightbar Notes: Input Voltage UNV= Universal 120 - 277V, 50/60Hz Dimming DIMELV = Trailing Edge Phase Dimming Driver DIM10 = 0 - 10V Dimming Driver Finish Painted BK = Black Options 12= 12” Stem 18= 18” Stem 24= 24” Stem BZ = Bronze CS = City Silver VE = Verde WT = White Premium Material BA = Brushed Aluminum * Consult your Cooper Lighting representative for additional options and finishes * Direct burial junction box provided by others Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Eaton’s Cooper Lighting Business 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.com Specifications and dimensions subject to change without notice. ADL121467 2014-1-27 12:34:36
© Copyright 2024 ExpyDoc
