MIMS Machinery Movers mimsriggers.com

MIMS Machinery Movers mimsriggers.com
A
# 3 2 7 Diamond Dresser — Diamond N i b may be
positioned i n front or on either side. Clamp opens
to 2 % " .
# 1 0 5 5 M i l l i n g Head Bracket—Mounts on vertical
miller spindle. Permits mounting the grinder at any
desired angle. 2-9/16" bore. (Special bores at extra
cost)
# 1 1 6 5 , # 2 1 6 5 , and # 1 2 6 5 Surface Grinder Brackets
— M o u n t on surface grinder spindle housing aftei
wheel and guard have been removed. Permits positioning the grinder at any desired angle.
#1165—31/4" diameter bore.
# 2 1 6 5 — 3 " diameter bore.
(Special bores at extra cost).
# 1 2 6 5 — B o r e d to order any diameter from SVa" to
41/2".
w
THE McGONEGAL MANUFACTURING CO.
EAST RUTHERFORD, NEW JERSEY 07073
Area Code 201 — Tel. 438-2313
,
'
\ P a g e 16
.
MIMS Machinery Movers mimsriggers.com
with #1525 Spindle
Assembly
Recommended for Lathes
9 " Swing or Smaller
(
^^^^^^
Equipment
Included
Specifications
2 Belts. 2 Wheel Collars 1". # 1 7 3 Clamp N u t ( I V s x
13/4x1/4"). Clamp Head Lock P i n . 4 Pulleys.
2 Wrenches.
Grinding Wheel: 2x3^x5/16".
• T H E M A C Motmted Wheels ( w i t h # 5 - 4 0 threaded
mandrel):—Vsx % "—1/4x1/4 " — Vax 1/4 "—V^x V& ".
#1542 Belt—7%x7/16"
# 1 5 4 9 Belt—7-15/16x7/16"
P u l l e y s : - # 1 — % " ; #2—29/32"; #3—1-5/64";
#4—1-23/64".
# 1 5 0 8 Wheel Guard can be supplied as extra equipment.
i/s H.P. Universal A.C. and D.C.
Speeds:—10,500—15,000—19,000 .
24,000—34,500—50,000
Grinding Wheels:—Vs" to 2" Diameter.
Grinding Spindle Extension — For external-grinding the grinding wheel is % " from end of spindle
housing, 1 % " from end of motor housing. For internal grinding w i t h T H E M A C threaded shank mounted
wheel 2-5/16". The clamp head screw is on a center
line w i t h the armature shaft.
Packed i n Steel Carrying Case.
The machine complete weighs 5 Lbs.
Shipping Weight 10 Lbs.
For other details see Pages 2, 3 and 6
J-15A
with #1575 Spindle
Assembly
Recommended for Lathes
9" Swing or Smaller
•
Equipment
Included
Specifications
2 Belts. 2 Wheel Collars 1". # 1 7 3 Clamp N u t ( I V s x
l % x i / 4 " ) . C l a m p H e a d L o c k - Pin. 4 Pulleys.
2 Wrenches.
Grinding Wheel:—2x3/8x5/16".
# 1 5 9 0 - i/s" Chuck Body w i t h Sleeve, lAxiAxVs",
i/axiAxi/s" Mounted Wheels.
# 1 5 2 1 - 2 % " Extension Spindle w/Arbor and Collar
1 Ea. 3/8, Vs and 3/4" Dia. x 1/4x14" Recessed Wheels.
#1542 Belt—7%"x7/16"
# 1 5 4 9 Belt—7-15/16"x7/16"
Pulleys:—#1—%"; #2—29/32"; #3—1-5/64";
#4—1-23/64".
# 1 5 0 8 Wheel Guard can be supplied as extra equipment.
Page 15
Vs H.P. Universal A.C. and D.C.
Speeds:—10,500—15,000—19,000
24,000—34,500—50,000
Grinding Wheels:—1/4" t o 2 " Diameter!
Grinding Spindle Extension — For external grinding the grinding wheel is % " from end of spindle
housing, 1 ^ " from end of motor housing. For internal
grinding w i t h chuck or extension spindle 2V2". T h e
clamp head screw is on a center line w i t h the armature shaft.
Packed i n Steel Carrying Case.
The machine complete weighs 5 Lbs.
Shipping Weight 10 Lbs.
For other details see Pages 2, 3 and 6
MIMS Machinery Movers mimsriggers.com
Type
with #945T Spindle
Assembly
Recommended for Lathes
13" Swing or Larger
M Wim.
Equlpmenf
Included
3 Belts. 2 Wheel Collars 21/2". Wheel Guard.
# 9 7 3 Clamp N u t (13/4x23/8x3/8"). Hollow Head Cap
Screw w i t h key. 5 Pulleys. 3 Wrenches.
Grinding Wheel:
#2097—1/4" Chuck Extension Spindle w i t h Sleeve.
Mounted Wheel:—1x1/4x1/4".
6xy2x3^".
#902 Belt—13-7/16"xl"
#2067—^External Extension Spindle w i t h 2 Wheel
Collars IV2" w i t h Nut. G r i n d i n g W h e e l s : —
# 9 4 2 Belt—15-1 l / 1 6 " x l "
21/2x1/2x1/2" — 4x1/2x1/2".
# 9 4 9 Belt—173/8"xl"
# 2 0 2 0 Internal Extension Spindle 2 " w i t h Arbor. 1
Wheel Collar 1/2" and 2 Wheel Collars 3/4".
Grinding Wheel 1x1/2x1/4".
Pulleys:
—
#1—1";
# 2 — 1 - 6 1 / 6 4 " ; #3—21/2";
# 4 — 3 - 9 / 3 2 " ; #5—41/8".
Specifications
Grinding Spindle Extension — For external grind-
1 H.P. Universal A.C. and D.C.
ing w i t h 6 " wheel the grinding wheel is % " from end
of spindle housing, 1%" from end of motor housing.
For internal grinding w i t h # 2 0 6 7 extension spindle
35/8". W i t h # 2 0 2 0 extension spindle 41/2". W i t h
mounted wheels 4 " .
Speeds:— 3,900— 4,800— 8,300
12,000—17,000—27,000
Grinding Wheels 1 " t o 6 " Diameter.
The clamp head screw is 2Va" i n front of center line
of the armature shaft.
The machine complete weighs 32 Lbs.
Shipping weight 53 Lbs.
For other details see Pages 4, 5 and 7
Packed i n a steel carrying case.
INTERCHANGEABLE EXTENSION
For No. 2025 Spindle Assembly.
For No. 945T Spindle Assembly.
«t*.
-Jiiji
1"
SPINDLES
For J-35 and J-45 Grinders.
For J-7 Grinders.
No. 2036 for external grinding, w i t h 2 wheel collars I I / 2 "
No. 2067 for external grinding, w i t h 2 each wheel collars
11/2" and 2 "
#2097
No. 2020 for internal grinding 2 " deep w i t h 1/4" arbor;
1/2" and V4" collars
#2020—2"
*
No. 2021 for internal grinding 2 " deep
#2036
^
No. 2031 for internal grinding 3 " deep
gi
No. 2037 for internal grinding 4 " deep
No. 2030 for internal grinding 5 " deep
#2030—5"
S
~
I
#2024—6"
#2067
. No. 2024 for internal grinding 6" deep
No. 2097 for mounted wheels 1/4", w i t h Vs" collet*'
Internal spindles supplied w i t h % " arbor and V&" collar.
Page 10
MIMS Machinery Movers mimsriggers.com
Type J-40
Type J-7
GRINDERS
-
BY
-
> WILL DO THE MOST
• WITH GREATER ACCURACY
• AT LOWER COST
- THROUGH BETTER DESIGN
-
O N E - E I G H T H TO" O N E H.P
Type J-30
Type J-35
Type J-45
Type J-3
Type J-40
Type J-4
Page 9
/
MIMS Machinery Movers mimsriggers.com
Equipment
1/2 H.P. Universal
(A.C. and D.C.)
Included
4 Belts. 2 each 1" and 2 " Wheel Collars. Wheel Guard. # 1 1 0
Clamp N u t (13/4x2%x3/8"). Clamp Head Lock Pin. 5 Pulleys.
2 Wrenches.
Grinding Wheels: 21/2x1/2x1/2"—SxYsxi^"
# 4 0 2 Belt—10-31/32"xl7/32"
# 4 4 2 Belt—10-31/32"xll/16"
# 4 4 8 Belt—123/8"xll/16"
# 4 4 9 Belt—123/8"xl7/32"
Pulleys: — # 1 — 5 5 / 6 4 " ; # 2 — 1 - 7 / 6 4 " ; # 3 — 1 - 4 7 / 6 4 " ;
: j ^ 4 _ 1 . 6 3 / 6 4 " ; # 5 — 2 - 1 3 / 1 6 " Dia.
Packed in a Steel Carrying Case.
SPEEDS
4-200-5,800-9,000
# 4 2 0 and # 4 4 0
Spindle Assembly Speeds
20,000-31,000-42,000
The machine complete weighs 17 Lbs.
Shipping weight 34 Lbs.
For other details see Pages 3, 5, 6 and 7
^^p^ J - 3 0
with #1115 Spindle
Assembly
Recommended for Lathes
9 " to 13" Swing
Equipment
SPEEDS
5,500-7,500-11,500
Included
3 Belts. Two I1/2" Wheel Collars. Wheel-Guard. # 2 1 7 3 Clamp
N u t (13/8x2x1/4"). Clamp Head Lock Pin. 5 Pulleys. 2 Wrenches.
Grinding Wheels:—3x3/sx3/8"—4x3/8x3/8".
# 1 4 0 Belt—10-17/32"x17/32''
# 1 4 2 Belt—10-17/32"x11/16"
# 1 4 1 Belt—12-3/32"x11/16".
PutLEYs: — # 1 — 5 5 / 6 4 " ; # 2 — 1 - 7 / 6 4 " ; # 3 — 1 - 4 7 / 6 4 " ;
# 4 — 1 - 6 3 / 6 4 " ; # 5 — 2 - 1 3 / 1 6 " Dia.
Packed i n a Steel Carrying Case.
The machine complete weighs 13 Lbs.
'•>"';
Shipping weight 25 Lbs.
For other details see Pages 3, 5, 6 and 7
Ife§e:;13
# 1 1 4 0 and # 1 1 8 0
Spindle Assembly Speeds
22,000-34,000-45,000
1/3 H.P. Universal
(A.C. and D.C.)
MIMS Machinery Movers mimsriggers.com
Type
with #1125 Spindle
Assembly
Recommended for Lathes
t
9 " to 13" Swing
Equipment
Specifications
Included
2 Belts. 2 Wheel Collars 11/2". Wheel Guard. # 1 7 3
Clamp N u t (11/8x13/4x1/4"). Clamp Head L o c k ' P i n .
4 Pulleys. 2" Extension Spindle w i t h Arbor and Collar.
2 Wrenches.
Grinding Wheel: 3x3/8x3/8".
Recessed Wheels: YaxYixVs"
—
%xiAxV8"
—
3/4x1/4x1/8".
# 1 0 2 Belt—10-3/32"xl7/32"
# 1 4 9 Belt—10-3/32"xll/16"
1/3 H.P. Universal A.C. and D.C.
Speeds:—7,000—10,500—25,000—36,000
Grinding Wheels: %" t o 3 " Diameter
Grinding Spindle Extension — For external grinding the grinding wheel is % " from end of spindle
housing, 1 % " from end of motor housing. For internal
grinding w i t h extension spindle 2 % " .
The clamp head screw is on a center line with the
armature shait.
The machine complete weighs IOV2 Lbs.
Shipping Weight 20 Lbs.
For other details see Pages 2, 3 and 6
Pulleys:
—
# 1 — 55/64"; # 2 — 1-7/64";
#3—1-47/64"; #4—1-63/64".
Packed i n a Steel Carrying Case.
Type J - 2 A 1
with #1125 Spindle
Assembly
Recommended for Lathes
9" to 13" Swing
^^^^^
Equipment
Included
Specifications
2 Belts. 2 Wheel Collars I1/2". Wheel Guard. # 2 1 7 3
Clamp N u t (13/8x2x14"). 4 Pulleys. 21/2" Extension
Spindle w i t h Arbor and Collar. Hollow Head Cap
Screw w i t h key. 2 Wrenches.
Grinding Wheel: 3x3^x3^".
Recessed Wheels: — VsxVixVa" — s/8xi/4xi/8" —
3/4x1/4x1/8".
#102
Belt—10-3/32"xl7/32"
# 1 4 9 Belt—10-3/32"xl 1/16"
Pulleys: — # 1 — 55/64"; # 2 — 1-7/64";
#3—1-47/64"; #4—1-63/64".
1/3 H.P. Universal A.C. and D.C.
Speeds:—7,000—10,500—25,000—36,000
Grinding Wheels: 3/8" to 3 " Diameter
Grinding Spindle Extension — For external grinding the grinding wheel is % " from end of spindle
housing, 1%" from end of motor housing. For internal
grinding w i t h extension spindle 2 % " .
The clamping screw is IVa" i n front of the center
line of the armature- shaft.
The machine complete weighs 13 Lbs.
Shipping Weight 21 Lbs.
For other details see Pages 2, 3 and 6
Packed i n a Steel Carrying Case.
Page 14
MIMS Machinery Movers mimsriggers.com
"^^p" J - 4
with #425 Spindle
Assembly
Recommended for Lathes
12" to 15" Swing
\
Equipment
Included
Specifications
4 Belts. Mounted Wheel Chuck 1/4" w i t h Vs" Collet.
2 Each Wheel Collars 3/4", 1" and 11/2". Wheel Guard.
# 1 1 0 Clamp N u t (13/4x23/4x3/8"). Clamp Head Lock
Pin. 5 Pulleys. 2" Extension Spindle w i t h N u t .
3 Wrenches.
Grinding Wheels:
—
11/2x1/4x1/4"—21/2x1/2x1/2—
4x1/2x1/2".
Mounted Wheels:—(with Vs" and
1/4"
Mandrel).
I/4XI/4Xl/s,"—y8x3/8X 1/8 " — I X 1/4x1/4 " .
# 4 0 2 Belt—10-31/32"xl7/32".
# 4 4 2 Belt—10-31/32"xll/16". ,
# 4 4 9 Belt—123/8"xl7/32".
Pulleys: — # 1 — 55/64"; # 2 — 1-7/64";
#3-_l-47/64"; #4—1-63/64"; #5—2-13/16".
1/2 H.P. Universal A.C. and D.C.
Speeds:— 5,800— 9,000—20,000
31,000—42,000
Grinding Wheels:—1/4" t o 4 " Diameter.
Grinding Spindle Extension — For external grinding the grinding wheel is 3 ^ " from end of spindle
housing, 13^" from end of motor housing. For internal
grinding w i t h mounted wheels 3 % " , w i t h extension
spindle 23/4".
The clamp head screw is on a center line with the
armature shaft.
Packed i n a Steel Carrying Case.
The machine complete weighs 17 V2 Lbs.
Shipping Weight 28 Lbs.
For other details see Pages 2, 3, S, 6, and 7
Type J . 3
with #125 Spindle
Assembly
Recommended for Lathes
9" t o 13" Swing
Equipment
Specifications
Included
2 Belts. Mounted Wheel Chuck V&". 2 Each Wheel
Collars 1 " and I1/2". Wheel Guard. # 2 1 7 3 Clamp
N u t (13/8x2x1/4"). Clamp Head L o c k Pin. 4 Pulleys.
2V2" Extension Spindle w i t h Arbor and collar.
2 Wrenches.
Grinding Wheels:—1 i^xS/gxs/g"—3x3/8x3/8".
Recessed Wheels: — YsxVixVs"
—
%xV4x%"
—
3/4x1/4x1/8".
Mounted Wheels ( w i t h Vs" m a n d r e l ) : — V i x i / i "
The clamp ,head screw is on a center line w i t h the
armature shaft.
Packed i n a Steel Carrying Case.
^y8x3/8".
# 1 4 0 Belt—10-17/32"xl7/32"
# 1 4 2 Belt—10-17/32"xll/16'i Pulleys:• — , # 1 — 55/64"; # 2 — 1-7/64";
#3—1-47/64^• # 4 — 1 - 6 3 / 6 4 " .
—
1/3 H.P. Universal A.C. and D.C.
Speeds: 7,000r-10,500—25,000—36,000
Grinding Wheels: 14" to 3 " Diameter..
Grinding Spindle Extension — For external grinding the grinding wheel is IVa" from end of spindle
housing, 2-1/16" from end of motor housing. For
internal grinding w i t h mounted wheel 3 % " , w i t h extension spindle 3-15/16".
1/2X1/4"
The machine complete weighs t3 Lbs.
Shipping Weight 20 Lbs.
For other details see Pages 2, 3, 6 and 7
Page.l^
MIMS Machinery Movers mimsriggers.com
Type J - 4 5
with #2025 Spindle
Assembly
Recommended for Lathes
12" to 15" Swing
^^^^
Equipment
Included
Specifications
4 Belts. Wheel Guard. # 1 1 0 Clamp N u t (13/4x2y4X
3/8"). Clamp Head Lock Pin. 5 Pulleys. 3 Wrenches.
# 2 0 6 7 External E x t e n s i o n Spindle w i t h 2 Each
Wheel Collars IV2" and 2 " Diameter and Nut.
Grinding Wheels: 3xi/2xy2"-4xy2xy2"-5x3/8xy2".
# 2 0 2 0 Internal Extension Spindle 2 " w i t h Arbor,
Wheel Collars y2" and 3/4" Diameter.
V2 H.P. Universal A.C. and D.C.
Speeds:— 4,200— 5,800— 9,000 ,
20,000—31,000—42,000
Grinding Wheels: V4" to 5" Diameter.
Grinding Spindle Extension — For external grinding the grinding wheel is 1" from end of spindle
housing, 2" from end of motor housing. For internal
grinding w i t h moimted wheel 2", w i t h recessed wheels
Grinding Wheel: 2x1/4x%".
# 2 0 9 7 — y 4 " Chuck Extension Spindle w i t h Sleeve
and y s " Collet. Mounted Wheels: — y4xy4xy8"—
y2xy4xy8"—ixy4xy4".
# 4 0 2 Belt—10-31/32"xl7/32"
# 4 4 2 Belt—10-31/32"xll/16"
# 4 4 9 Belt—123/8"xl7/32"
# 4 4 8 Belt—123/8"xll/16"
33/4".
The clamp head screw is on a center line w i t h the
armature shaft.
Packed i n a steel carrying case.
The machine complete weighs 17 Lbs.
Shipping Weight 32 Lbs.
For other details see Pages 4, 5, 6, 7 and
Pulleys:
—
#1—55/64"; #2—1-7/64";
#3—1.47/64"; #4—1-63/64"; #5—2-13/16".
J-35
with #2025 Spindle
Assembly
Recommended for Lathes
9 " to 13" Swing
Equipment
Included
Specifications
3 Belts. Wheel Guard. # 2 1 7 3 Clamp N u t (13/8x2x
y 4 " ) . Clamp Head Lock Pin. 5 Pulleys. 3 Wrenches.
# 2 0 3 6 External Extension Spindle w i t h 2 Wheel
Collars i y 2 " and N u t . Grinding Wheels: 3x3/8x3/8"
—4x3/8x3/8".
# 2 0 2 1 Internal Extension Spindle 2 " w i t h Arbor and
Collar. Recessed Wheels:—3/8xy4xy8"—3/4xy4xy8".
# 2 0 9 7 — y 4 " Chuck Extension Spindle w i t h Sleeve
and Vs" Collet. Mounted Wheels: — V^xV^xVs"—
y2x y4x y s " — i x y4x y4".
# 140 Belt—10-17/32"xl7/32"
# 142 B e l t — 1 0 - 1 7 / 3 2 " x l l / 1 6 "
# 2 0 4 2 Belt—12-3/16"xl7/32"
Pulleys: — # 1 — 55/64"; # 2 — 1-7/64";
#3—1.47/64"; #4—1-63/64"; #5—2-13/16".
Vs H.P. Universal A.C. and D.C.
Speeds:— 5,500— 7,500—11,500
22,000—34,000—45,000
Grinding Wheels: V4" to 4 " Diameter.
Grinding Spindle Extension — For external grinding the grinding wheel is 1 " from end of spindle
housing, 2-5/16" from end of motor housing. For i n ternal grinding w i t h mounted wheel 2", w i t h recessed
wheels 2 % " .
The clamp head screw is on a center line w i t h the
armature shaft.
Packed i n a Steel Carrying Case.
The machine complete weighs 13 Lbs.
Shipping Weight 28 Lbs.
For other details see Pages 4, 5, 6, 7 and
Page 11
MIMS Machinery Movers mimsriggers.com
(ILLUSTRATIONS ACTUAL SIZE)
0
154 190
117
105
121
E3E
406
This group internally threaded
3/8 "-24 R.H., made of cold finished steel. Wheel arbors and
chuck sleeves case hardened.
Interchangeable on Spindle
Assemblies # 1 2 5 , # 1 1 1 5 ,
# 1 1 2 5 shown opposite.
357
705
198
2117
2143
143
171
497
This group internally threaded
1/2 "-24 R.H., made of cold finished steel. Wheel arbor, chuck
sleeve and nut case hardened.
Interchangeable on Spindle
Assemblies # 4 2 5 and # 4 4 5
shown opposite.
£143
7Z\
4^4
405
^143
This group internally threaded 5/16"-32 R.H., made
of cold finished steel. Wheel arbor, collar and chuck
sleeve case hardened. W i l l f i t Spindle Assemblies
#1525 and #1575 only, shown opposite.
1590
117
154^
Page 2
105
1521
MIMS Machinery Movers mimsriggers.com
o
PRICE LIST OF
THE MOST PRACTICAL HG
IH SPEED PRECISION TOOL
GRINDERS
FOR PRECISION FINISHING OF ALL METALS, PLASTICS AND CERAMICS
FEATURING
o
EXCLUSIVE CIRCUMFERENTIAL SPINDLE ADJUSTMENT FOR QUICK SET UP
ECCENTRIC SPINDLE HOUSINGS FOR QUICK, POSITIVE, VIBRATIONLESS BELT ADJUSTMENT
SHORT BELT CENTERS -
COMPACT -
NO OVERHANGING WEIGHT
PERMANENT LUBRICATION FOR LONG LIFE AND OPERATION
IN A N Y POSITION O N A N Y MACHINE TOOL
INTERCHANGEABILITY AND DIMENSIONAL INFORMATION
PERTAINING TO
SPINDLE ASSEMBLIES
AND
EXTENSION SPINDLES
o
THE McGONEGAL MANUFACTURING COMPANY
East Rutherford, New Jersey
printed in U. S. A ,
07073
MIMS Machinery Movers mimsriggers.com
Spindle Assemblies for Deep Internal Grinding
Spindle
Mounted
on 3 Ball
Bearings
# 1 4 5 5 - # 1 4 6 3 For Themac Grinders Type J 3 , J30, J35, J 4 , J40, J45
1 Pair #2081 Spindle Tube Brackets Required to Adapt to J3 and J30
- #2081 Price Per Pair $8.50.
!f coolant is to be used w h e n grinding, provision must be made to
exclude the coolant from the bearings. Prices quoted upon request.
•P-
0
-c-
-A-
^
5
-N-
Stock
Number
A
B
D
c
E
F
H
G
\
Dia.
1455
1X6
1X6
1^8
'A
^X6
1456
1X6
1X6
1^8
X6
^X6
1457
1^6
1X6
1^8
X6
^X6
1458
1459
-JVi
1-460
1461
1462
7K
1463
1X6
1X6
1^8
1X6
1X6
1^8
1X6
1X6
1^8
1X6
1X6
1X6
1X6
1X6
1X6
-G-
%
%
K
L
Dia.
Thread
Thread
Y,-2A
Va Ya Y,-2A
Yz-2A
Va 1
X6
VA %-24
Ys
X6
VVa K-24
1%
1%
1%
Y,
1^
Y,
VA
Yz V^ VA
Yz V 1 X 6
VA
1 ^ X6 iXa
iXs X6 1 X 6
"O"
1
1
•\%
Va li
Ya 1^2
X6
1^2
X6
1X2
1^8
^X6
J
1X2
K-24
^-24
^-24
^-24
N
M
P
*o
R
10-24
Yz -IVa 6 bYz
>4-28
Y, 7 X 6 6 (>Yz
Va-2^ Yz 1 1 X 6 10 10^
X6-32
6
Yz 7 ^
eYz
^-24
10
10^
Yz 11^
^-24
Yz 7^2 6 6X2
^-24
Yz 11X2 10 10X2
K-24 Yz 7X2
6
6X2
10
X2-24
Yz 11X2
10X2
-c-
-0-
# 9 7 4 — # 9 9 8 For Type J-7 Grinders Only
A
B
c
D
E
F
G
H
1
J
K
L
Dia.
Thread
Thread
iXs
>2-24
X6-32
Yz VA
Yz VA
Yz VA
V2 VA
Vi 1 X 6
V2 VA
X2-24
Dia.
974
975
991
993
994
995
996
997
993
VA
9X2 VA
9X2 VA
9X2 VA
9X2 VA
9X2
VA
VA
9X2
9X2 VA
9X2 VA
9X2
X2
X2
X2
X2
Dimension can be changed to any desired length.
-p-
Stock
Number
Yz
Yz
Yz
Yz
Yz
2
2X6 Va
2
2X6 Va 1X2
2
2X6
2
2X6
2
2X6
2
2X6
2
2X6
2
2X6
2
2X6
X8
VA
V2 X6
Vi
Vi
X6 1X2
Vi
X6 1X2
X6 1 X 6 VA Vi
X6 1 X 6 VA Vi
X6 1X6 1X2 Vi
X6 1 X 6 VA Vi
X6 iXa VA Vi
1%
1%
1%
Ya
Ya
X2-24
X2-24
y2-24
^-24
X2-24
2
X2-24
2 %
V1-IA
* " O " Dimension can be clianged to any desired length.
Page 7
M
Va
%-24
Va
^-24
Va
^-24
Va
X2-24
Va
^-24
Va
X2-24
Va
K-24
Va
%-24 Va
*o
6
10
6
P
R
(^Yz Yz
10^ Yz
6^
Yz
10
10X2
8
8X2
12
12X2
14
14X2
16
I6X2
18
I8X2
X2
X2
X2
X2
X2
X2
MIMS Machinery Movers mimsriggers.com
Price List
September 1, 1968
SUBJECT TO CHANGE
ALL
WITHOUT
NOTICE
GRINDERS PACKED IN CARRYING
CASE
Precision Lathe Grinders
Xype
Stock Spindle Assemblies
( F o r 115 V o l t )
J-2A w/#1125
Price
Spindle Assembly -
-
-
$236.25
J - 2 A 1 w / # 1125 Spindle A s s e m b l y -
-
-
236.25
J-3 w/#125
-
Spindle Assembly
included
Type
Price
#125
$96.60
-
246.75
#420
110.25
J-30 w / # 1115 Spindle Assembly J-30 w / # 1 1 1 5 and # 1 1 4 0 Spindle Assemblies
194.25
278.25
#425
#440
107.10
117.60
J-30 w / # 1 1 1 5 , # 1 1 4 0 and
# 1 1 8 0 Spindle Assemblies -
351.75
#445
#945T
92.40
156.45
J-35 w/#2025
J-4 w/#425
Spindle Assembly
Spindle Assembly
J-7 w/#945T
Spindle Assembly
J-15 w / # 1 5 2 5
Spindle Assembly
-
No grinding wheels or extension spindles
•
-
-
-
-
-
260.40
#1115
-
-
-
258.30
#1125
72.45
-
-
-
439.95
#1140
93.45
-
-
-
198.45
#1180
99.75
-
J - I S w / # 1525 and # 1 5 4 5 Spindle Assemblies
267.75
#1525
J - 1 5 A w / # 1 5 7 5 Spindle Assembly -
-
-
198.45
#1545
-
-
J-40 w / # 4 4 5
Spindle Assembly
-
-
208.95
#1575
-
-
J-40 w / # 4 4 5
and # 4 2 0 Spindle Assemblies -
311.85
#2025
414.75
303.45
#974_6"
-
-
-
86.10
78.75
-
-
-
-
-
-
88.20
76.65
122.85
J-40 w / # 4 4 5 , # 4 2 0 and
# 4 4 0 Spindle Assemblies
J - 4 5 w / # 2 0 2 5 Spindle Assembly
-
-
-
Special Spindle Assemblies
$220.50
For 220 or 230 V o l t
#975—10"
-
-
-
-
-
-
-
234.15
A l l grinders but J - 5 0 & J - 8 0 — A d d $15.00 each to above
prices.
#991—6"
#993—10"
#994—8"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
228.90
238.35
246.75
-
-
-
-
-
-
-
255.15
266.70
16" -
-
-
-
-
-
-
276.15
#995—12"
#996_14"
H a n d Grinders
J-50 H a n d Grinder
-
-
-
-
-
63.00
#997
-
-
-
-
70.35
^ggg—ig"
287.70
J-50 w/Tool Post Attachment
-
-
-•
70.88
#1455
6"
201.08
88.20
#1456
6"
-
-
-
96.60
#1457—10"
96.08
J-50 w / # 0 Jacobs Chuck
J-80 H a n d Grinder
J-80 w / # 0 Jacobs Chuck
-
J-80 w/Tool Post Attachment
.
-
-
T o o l Post Attachment Only -
-
-
-
7.50
For 220 or 230 V o l t
#1458
6"
#1459
10"
-
-
-
-
-
-
-
198.45
207.64
-
-
-
-
-
-
-
197.40
-
202.65
#1460—6"
206.06
Add $6.00 each to above prices.
# 1461—10"
#1462—6"
211.05
195.30
t:^
#1463—10"
_^
T
TT
J ^
For Left H a n d Operation
^^^^
A l l Grinders except J - 1 5 , J - 5 0 and J - 8 0 .
202.65
Special Spindle Assemblies
to your specifications.
M o t o r — A d d $15.00 to above prices.
Surface Grinder Brackets
Spindle Assembly—^Add $8.50 each to above prices.
Spindles for J - 7 , J - 3 5 and J - 4 5 — P r i c e s on request.
J - 1 5 , J - 5 0 and J-80 supplied i n standard direction of
rotation only.
N O T E — E x t e n s i o n spindles for all grinders supplied right
hand only.
115 Volt
"Cyclone" Dental Lathe
220 or 230 Volt
$231.00
# 2 1 6 5 with 3 " D i a . Bore
-
-
$ 21.00
# 1 1 6 5 with 31/4" D i a . Bore
# 1 2 6 5 (Specify B o r e — A n y
^^Z^" up to 41/2")
# 1 0 6 5 , # 1 1 6 5 and # 2 1 6 5
.
Diameter
with special bore
2I.OO
#1065 w A 2 ? f ,
246.75
Bore
Area Code 201 — Tel. 438-2313
Page 8
07073
3S.OO
26.00
21.00
# 3 2 7 Clamp T y p e Diamond Dresser
EAST RUTHERFORD, NEW JERSEY
-
^^^^
THE McGONEGAL MANUFACTURING
PRINTED IN U.S-A.
-
CO.
-
-
12.00
MIMS Machinery Movers mimsriggers.com
(ILLUSTRATIONS
ACTUAL
SIZE)
This group w i l l f i t #2025 Spindle Assembly and # 9 4 5 T Spindle
Assembly only, shown opposite. Extensions heat treated and ground.
Wheel arbors, chuck sleeves and nuts case hardened.
/
>—
130
144
\
2056
2021
2020
\
91Z
446
I
Z061
605
05
2031
2037
2030
2024
This Extension made of cold finished steel, threaded
% " - 2 8 R.H., Arbor and Collar case hardened.
B
117
Page 4
[05
1406
MIMS Machinery Movers mimsriggers.com
#154
#190
#198
#406
#121
#721
#705
#2121
Chuck Body and # 1 1 1 Sleeve 3/32" Capacity
_.._$5.75
Chuck Body and # 1 1 1 Sleeve Vs" Capacity
5.35
Chuck Body and # 3 9 7 Sleeve 1/4" Capacity
7.25
Collet to reduce 1/4" Chuck to Vs"
-.
1.25
Extension Spindle w i t h # 1 1 7 Arbor Vs" Dia. and # 1 0 5 Collar, for Recessed Wheels
___
5.10
Extension Spindle w i t h # 1 1 7 Arbor Vs" Dia. and # 1 0 5 Collar, for Recessed Wheels
4.80
Wheel Collar % " Dia. (Use to mount 1/4" Face x 1/4" Bore Wheels on # 7 2 1 Extension)
Per Pair .60
Extension Spindle w i t h # 2 1 1 7 Arbor, 1-#143 and 1-#2143 Collar (For Wheels % " Face x % " Bore,
up to 2 % " Dia.)._
- 7.75
# 1 2 5 , # 1 1 1 5 and # 1 1 2 5 S P I N D L E A S S E M B L I E S
For % " Face x % " Bore Wheels and extensions described above and illustrated opposite. Interchangeable on grinders Type J-2A, J-2A1, J-3 and J-30.
Adaptable to J-35 Grinder b y use of # 1 1 7 1 Spindle
Tube Brackets. # 1 1 7 1 price per pair
$8.50
B o t h ends of shaft are threaded y 8 " - 2 4 R.H.
Stock
No.
125
1115
1125
-3t-A-
A
B
Max.
Speed
Max.
Wheel Dia.
10-25/32"
1"
3/16"
Vs"
45,000
16,000
36,000
3"
4"
3"
97/8"
97/8"
Wheel
Collars
2 - # 143-1"
Standard
Equip. On
Nuts
2 - # 144-11/2"
2 - # 144-11/2"
2 - # 144-11/2"
2-#130
2-#130
2-#130
J-3
J-30
J-2A
J-2A1
# 4 2 4 Extension Spindle w i t h 2-#405 Collars % " and # 1 7 1 N u t (For VA" Face x 1/4" Bore Wheels up to
2 " Dia.)
$7.50
# 4 9 7 Chuck Body and # 3 9 7 Sleeve 1/4" Capacity
._
_.
7.25
# 4 0 6 Collet to reduce VA" Chuck to Vs"1.25
# 1 4 2 1 Extension Spindle w i t h # 2 1 1 7 Arbor, 1-#143 and 1-#2143 Collar (For Wheels W Face x % " Bore,
up to 2 % " Dia.)
8.00
# 4 2 5 and # 4 4 5 S P I N D L E A S S E M B L I E S
For Vz" Face x
Bore Wheels and extensions
described above and illustrated opposite. Interchangeable on grinders Type J-4, J-40, J-35 and
J-45. Adaptable to J-3 and J-30 Grinders b y use
of # 2 0 8 1 Spindle Tube Brackets. # 2 0 8 1 price
per pair
$8.50
Wheel end of shaft is threaded y 2 " - 2 4 R.H. Pulley
end of shaft is threaded y 8 " - 2 4 R.H.
Stock
No.
Max.
Speed
Max.
Wheel Dia.
425
45,000
4"
445
#1521
16,000
•9:
II-
Wheel
Collars
2-#443-l"
2-#444-iy2"
2-#443-l"
2-#605-2"
5"
Standard
Equip. On
Nuts
1-#130
1-#912
1-#130
1-#912
J-4
J-40
Extension Spindle with # 1 1 7 Arbor Vs" Dia. and # 1 0 5 Collar, for Recessed Wheels.
# 1 5 9 0 Chuck Body and # 1 5 4 6 Sleeve Vs" Capacity
.$4.95
. 5.50
# 1 5 2 5 and # 1 5 7 5 S P I N D L E A S S E M B L I E S .
For grinding wheels % " Face x 5/16" Bore and extensions # 1 5 9 0
and # 1 5 2 1 described above and illustrated opposite. For use on
grinders T y p e J-15 and J-15A only. M a x i m u m speed 50,000 R P M .
Supplied w i t h 2-#1543 Collars 1", 1-#1530 and # 1 7 1 Nuts.
Wheel end of shaft is threaded 5/16"-32 R.H. Pulley end of shaft is
threaded % " - 2 8 R.H. # 1 5 2 5 is also internally threaded on wheel
end # 5 - 4 0 R.H. for T H E M A C wheels mounted on threaded
mandrels.
Page 3
-54-7{f-
MIMS Machinery Movers mimsriggers.com
# 2 0 3 6 Extension Spindle w i t h 2 - # 1 4 4 Collars IV2" Dia. and # 1 3 0 N u t (For wheels % " Face x W Bore
up t o 4 " Dia.)
:
:
$16.75
# 2 0 6 7 Extension Spindle with 2-#605 Collars 2" Dia., 2 - # 4 4 4 Collars I V 2 " Dia. and # 9 1 2 N u t
wheels Vz" Face x 1/2" Bore up to 4 " Dia. and Vs" Face up to 5" Dia.)
# 2 0 9 7 Chuck Extension 1/4" Cap. w i t h # 3 9 7 Sleeve and # 4 0 6 Collet
mounted on
or Vs" mandrels)
Vs" Cap.
(For use with
(For
21.25
wheels
22.75
# 2 0 2 0 - 2 " Extension Spindle w i t h 2-#405 Collars W and # 4 4 6 Arbor 1/4" Dia. # 2 8 R.H. Thread
wheels V2" Face x 1/4" Bore u p to 1" Dia. and VA" Face x VA" Bore up to 2 " Dia.)
# 2 0 2 1 - 2 " Extension Spindle w i t h # 1 1 7 Arbor Vs" Dia. and # 1 0 5 Collar....
(For
_
# 2 0 3 1 - 3 " Extension Spindle w i t h # 1 1 7 Arbor i/s" Dia. and # 1 0 5 Collar
# 2 0 3 7 - 4 " Extension Spindle w i t h # 1 1 7 Arbor Vs" Dia. and # 1 0 5 Collar
19.50
13.00
17.00
_.
18.00
# 2 0 3 0 - 5 " Extension Spindle w i t h # 1 1 7 Arbor Vs" Dia. and # 1 0 5 Collar
19.20
# 2 0 2 4 - 6 " Extension Spindle w i t h # 1 1 7 Arbor Vs" Dia. and # 1 0 5 Collar
21.50
(Nos. 2021, 2031, 2037, 2030 and 2024 are for use w i t h recessed wheels up to 1" Dia.)
#2025 SPINDLE ASSEMBLY
For use w i t h Extension Spindles described above and illustrated opposite only. Supplied w i t h l - # 130 Nut. Standard
equipment on Type J-35 and J-45 Grinders. M a x i m u m Wheel Dia. recommended 5". M a x i m u m Speed 45,000 R P M .
Interchangeable on Grinders Type J-35, J-4, J-40 and J-45. Adaptable to Grinders Type J-3 and J-30 by use of
# 2 0 8 1 Spindle Tube Brackets. # 2 0 8 1 price per pair
_
.....$8.50
Pulley end of shaft is threaded
3/8"-24 R.H., wheel end of shaft
is internally threaded 5/16"-24
R.H. for extension spindles.
#945T SPINDLE ASSEMBLY
For grinding wheels V2" Face x % "
Bore up to 6" Dia. and extensions described above and illustrated opposite.
For use w i t h T y p e J-7 Grinder only.
M a x i m u m Speed 27,000 R P M . SuppUed
w i t h 2 - # 9 4 4 Collars 21/2" Dia., l - # 9 3 0
and 1-#912 Nuts. Wheel end of shaft is
threaded 3/4 "-24 R.H. Pulley end of
shaft is threaded 1/2 "-24 R.H. Wheel pnd
of shaft is internally threaded 5/16"-24
R.H. for extension spindles.
as
IT
-13 A-
# 1 4 0 6 Extension Spindle w i t h # 1 1 7 Arbor Vs" Dia. and # 1 0 5 Collar, for Recessed Wheels. Interchangeable
on # 4 2 0 Spindle Assembly, or # 2 0 2 0 Extension Spindles. Price # 1 4 0 6 w i t h # 1 1 7 and # 1 0 5
Page 5
4.25
MIMS Machinery Movers mimsriggers.com
#1545 SPINDLE ASSEMBLY.
12
M a x i m u m Speed 50,000 R P M . Supplied w i t h # 1 5 4 6 Sleeve and
# 1 7 1 Nut. For use w i t h grinding wheels mounted on Va" Dia.
Mandrels only. Can be used on Grinders Type J-15 and J-15 A only.
#1180 SPINDLE ASSEMBLY.
M a x i m u m Speed 45,000 R P M . Supplied w i t h # 1 1 1 Sleeve
and # 1 3 0 Nut. For use w i t h grinding wheels mounted on
Va" Dia. Mandrels only. Interchangeable on Grinders Type
J-2A, J-2A1, J-3 and J-30. Adaptable to Type J-35 Grinder
by use of # 1 1 7 1 Spindle Tube Brackets. # 1 1 7 1 price per
pair
$8.50
o
2.
T
_
3:
p
X
-15^- 7 *
r
#440 SPINDLE ASSEMBLY.
M a x i m u m Speed 45,000 R P M . Supplied w i t h # 3 9 7
Sleeve, # 4 0 6 Collet Va" Capacity and # 1 3 0 Nut.
For use w i t h grinding wheels mounted on Va" or Vi"
Dia. Mandrels. Interchangeable on Grinders Type
J-35, J-4, J-40 and J-45. Adaptable to Grinders Type
J-3 and J-30 b y use of # 2 0 8 1 Spindle Tube Brackets.
# 2 0 8 1 price per pair
$8.50
to
^3
4'
M a x i m u m Speed 45,000 R P M . Supplied w i t h
# 1 1 7 Arbor Va" Dia. and # 1 0 5 Collar. For
use w i t h recessed grinding wheels up to 1 "
Dia. Interchangeable on Grinders Type J-2A,
J-2A1, J-3 and J-30. Adaptable to T y p e J-35
Grinder b y use o f # 1 1 7 1 Spindle Tube
Brackets. # 1 1 7 1 price per pair
___
$8.50
Can also be supplied on special order i n
lengths 2", 4", 5" and 6".
-2/f- 7 i r -10
#1140 SPINDLE ASSEMBLY.
.
if-
\
\
#420 SPINDLE ASSEMBLY.
M a x i m u m Speed 45,000 R P M . Supplied w i t h 2# 4 0 5 Collars VA" and # 4 4 6 Arbor VA" Dia.
For use w i t h grinding wheels VA" Face x VA"
Bore up to 2" Dia. Interchangeable on Grinders
Type J-35, J-4, J-40 and J-45. Adaptable to
Grinders Type J-3 and J-30 b y use of # 2 0 8 1
Spindle Tube Brackets. # 2081 price per pair
$8.50
Can also be supplied 3 " long on special order.
Pa|e 6
w-
-If-
1
1
, mil
'
^ -
x _
— l i t -
MIMS Machinery Movers mimsriggers.com
Type
with #945T Spindle
Assembly
Recommended for Lathes
13" Swing or Larger
Equipment
Included
# 2 0 9 7 — y 4 " Chuck Extension Spindle w i t h Sleeve.
3 Belts. 2 Wheel Collars 21/2". Wheel Guard.
# 9 7 3 Clamp N u t (13/4x23/8x3/8"). Hollow Head Cap
Screw w i t h key. 5 Pulleys. 3 Wrenches.
Mounted
G R I N D I N G W H E E L : 6xV2x3/4".
#902
BELT—13-7/16"xl"
JJ.2067—^External Extension Spindle w i t h 2 Wheel
Collars i y 2 " w i t h N u t . G r i n d i n g W h e e l s : —
#942
BELT—15-ll/16"xl"
2V2xy2xV2"
—
Wheel:—Ixy4xy4".
#949 BELT—173/8 " x l "
4xy2xy2".
# 2 0 2 0 Internal Extension Spindle 2" w i t h Arbor.
2 Wheel Collars ^A". Grinding Wheel I x y 2 x y 4 " .
PULLEYS:
—
#1—1";
#2—1-61/64";
#3—21/2":
#4—3-9/32";-#5—4y8".
Speefffcaffons
1 H . P . Universal A.C. and D.C.
G R I N D I N G S P I N D L E E X T E N S I O N —- For external grind-
ing w i t h 6" wheel the grinding wheel is 3/4" from end
of spindle housing, IYA" from end of motor housing.
For internal grinding w i t h # 2 0 6 7 extension spindle
3y8". W i t h # 2 0 2 0 extension spindle 4y2". W i t h
mounted wheels 4 " .
The machine complete weighs 32 Lbs.
Shipping weight 53 Lbs.
For
other
details
see
Pages
4, 5 and
Speeds:— 3,900— 4,800— 8,300
12,000—17,000—27,000
Grinding Wheels 1" to 6" Diameter.
The clamp head screw is 2 % " i n front of center line
of the armature shaft.
Packed i n a Steel Carrying Case.
7
INTERCHANGEABLE EXTENSION
SPINDLES
For No. 2025 Spindle Assembly. For J-35 and J-45 Grinders.
For No. 945T Spindle Assembly. For J-7 Grinders.
--JIJJI—J"
No. 2036 for external grinding, w i t h 2 wheel collars I V 2 "
No. 2067 for external grinding, with 2 each wheel collars
i y 2 " and 2 "
#2097
No. 2020 for internal grinding 2 " deep w i t h y 4 " arbor;
and 3 ^ " collars
#2031—3"
#2036
No. 2021 for internal grinding 2"
deep
No. 2031 for internal grinding 3 " deep
H
#2037—4"
No. 2037 for internal grinding 4 " deep
No. 2030 for internal grinding 5" deep
# 2 0 ^ ^ "
-saw-
#2024—6"
#2067
No. 2024 for internal grinding 6" deep
No. 2q97 for mounted wheels y 4 " , w i t h y 8 " collet
Internal spindles supplied w i t h % " arbor and 3/3" collar.
Page 10
MIMS Machinery Movers mimsriggers.com
Type J-40
Type J-7
Type J-3
Type J-40
Page, 9
Type J-4
MIMS Machinery Movers mimsriggers.com
^^p^
J-15
with #1525 Spindle
J
Assembly
Recommended for Lathes
9 " Swing or Smaller
^- :
Equipment
I
Included
Specifications
2 Belts. 2 Wheel Collars 1". # 1 7 3 Clamp N u t ( I V s x
,13/4x1/4"). Clamp Head Lock P i n . 4 Pulleys.
2 Wrenches.
G R I N D I N G W H E E L : 2x3^x5/16".
T H E M A C Mounted Wheels ( w i t h # 5 - 4 0 threaded
mandrel) : —i/sxVA"—VAXVA"— VZXVA"~^/AX VS".
#1542 B E L T — 7 % x 7 / 1 6 "
#1549 BELT—7-15/16x7/16"
P U L L E Y S : — # 1 — % " ; #2—29/32"; #3—1-5/64";
#4—1-23/64".
# 1 5 0 8 Wheel Guard can be supplied as extra equipment.
Vs H.P. Universal A.C. and D.C.
Speeds: —10,500—15,000—19,000
24,000—34,500—50,000
G R I N D I N G W H E E L S : — V a " to 2 " Diameter.
G R I N D I N G S P I N D L E E X T E N S I O N — For external grinding the grinding wheel is % " from end of spindle
housing, IVA" from end of motor housing. For internal grinding w i t h T H E M A C threaded shank mounted
wheel 2-5/16". T h e clamp head screw is on a center
line w i t h the armature shaft.
Packed i n Carrying Case.
The
machine complete weighs 5 Lbs.
Shipping Weight 10 Lbs.
For
other
details
see Pages
2, 3 and 6
'^'^ J - 1 5 A
with #1575 Spindle
Assembly
Recommended for Lathes
9 " Swing or Smaller
Equipment
Included
Specifleafions
2 Belts. 2 Wheel Collars 1 " . # 1 7 3 Clamp N u t ( I V s x
13/4x1/4"). C l a m p H e a d L o c k P i n . 4 Pulleys.
2 Wrenches.
GRINDING
WHEEL:—2x3/8x5/16".
# 1 5 9 0 - Va" Chuck Body w i t h Sleeve, 1/4x1/4x1/8",
1/2x1/4x1/8" Mounted Wheels.
# 1 5 2 1 - 2 1 / 8 " Extension Spindle w,/Arbor and Collar
1 Ea. 3/8, s/g and 3/4" Dia. x VAxVa" Recessed Wheels.
#1542 B E L T — 7 5 / 8 "x7/16"
#1549 BELT—7-15/16"x7/16"^
P U L L E Y S : — # 1 — 5 / 8 " ; #2—29/32"; #3—1-^/64";
jjt4_1.23/64".
# 1 5 0 8 Wheel Guard can be supplied as extra equipment.
Va H.P. Universal A.C. and D.C.
Speeds:—10,500—15,000—19,000
24,000—34,500—50,000
G R I N D I N G W H E E L S : — 1 / 4 " to 2 " Diameter.
G R I N D I N G S P I N D L E E X T E N S I O N — For external grinding the grinding wheel is Va" from end of spindle
housing, IVA" from end of motor housing. For internal
grinding w i t h chuck or extension spindle 2V2". The
clamp head screw is on a center line w i t h the armature shaft.
Packed i n Carrying Case.
The machine complete weighs 5 Lbs.
Shipping Weight 10 Lbs.
Page 15
For
other
details
see Pages
2, 3 and 6
MIMS Machinery Movers mimsriggers.com
# 3 2 7 Diamond Dresser — Diamond N i b may be
positioned i n front or on either side. Clamp opens
to 25/8".
# 1 0 6 5 M i l l i n g Head Bracket—Mounts on. vertical
miller spindle. Permits mounting the grinder at any
desired angle. 2-9/16" bore. (Special bores at extra
cost)
# 1 1 6 5 , # 2 1 6 5 , and # 1 2 6 5 Surface Grinder Brackets
- ^ M o u n t on surface grinder spindle housing after
wheel and guard have been removed. Permits positioning the grinder at any desired angle.
# 1 1 6 5 — 3 1 / 4 " diameter bore.
# 2 1 6 5 — 3 " diameter bore.
(Special bores at extra cost).
# 1 2 6 5 — B o r e d t o order any diameter from 31/2" t o
41/2".
THE McGONEGAL MANUFACTURING CO.
EAST RUTHERFORD, NEW JERSEY 07073
Area Code 201 —Tel. 438-2313
Page 16
MIMS Machinery Movers mimsriggers.com
J-4
Typ-
with #425 Spindle
Assembly
Recommended for Lathes
12" to 15" Swing
Eqaipmenf
Included
Specifications
4 Belts. Mounted Wheel Chuck VA" w i t h Vs" Collet.
2 Each Wheel Collars VA", 1" and 1V2". Wheel Guard.
# 1 1 0 Clamp N u t {1VAX2YAXYS").
Clamp Head Lock
Pin. 5 Pulleys. 2" Extension Spindle w i t h Nut.
3 Wrenches.
GRINDING
WHEELS:
IVIXVAXVA"—2V2xV2xy2—
—
4xy2xi/2".
M O U N T E D W H E E L S : — - ( w i t h Vs" and VA" M a n d r e l ) .
y 4 x y4x Vs"—ysxs/sx y s " — i x y4xy4".
#402 BELT—10-31/32"xl7/32".
# 4 4 2 B E L T — 1 0 - 3 l / 3 2 " x l 1/16".
#449 BELT—12ys"xl7/32".
Vz H.P. Universal A.C. and D.C.
Speeds:— 5,800— 9,000—20,000
31,000—42,000
G R I N D I N G W H E E L S : — y 4 " to 4 " Diameter.
G R I N D I N G S P I N D L E E X T E N S I O N — For external grind-
ing the grinding wheel is W
iroxn. end of spindle
housing, 1 % " from end of motor housing. For internal
grinding w i t h mounted wheels 3VA", w i t h extension
spindle 2y4".
The clan*ip head screw is on a center line w i t h the
armature shaft.
Packed i n Carrying Case.
The
machine
complete
Shipping
P U L L E Y S : — # 1 — 55/64"; # 2 — 1-7/64";
:i^3—1-47/64"; # 4 — 1 - 6 3 / 6 4 " ; # 5 — 2 - 1 3 / 1 6 " .
For
other
details
weighs 17 Vz Lbs.
Weight 28 Lbs.
see
Pages
2, 3, 5, 6, and
Type
7
J-3
with #125 Spindle
Assembly
Recommended for Lathes
9 " to 13" Swing
^ ^ ^ ^ 9m
Equipment
Included
2 Belts. Mounted Wheel Chuck Vs".
Collars 1" and i y 2 " . Wheel Guard.
Nut ( i y 8 x 2 x y 4 " ) . Clamp Head Lock
2 y 2 " Extension Spindle w i t h Arbor
2 Wrenches.
Specifications
2 Each Wheel
# 2 1 7 3 Clamp
Pin. 4 Pulleys.
and collar.
G R I N D I N G WHEELS:—!y2x3/8x3/8"_3x3/8x3/s".
RECESSED WHEELS:
—
VSXVAXVS"
—
VSX.VAX.VS"
—
3/4xy4xy8".
M O U N T E D W H E E L S ( w i t h Vs"
mandrel): —
— y2xy4" — ¥sx%".
#140 BELT—10-17/32"xl7/32"
#142 BELT—10-17/32"xll/16"
VAXYA"
V3 H P . Universal A.C. and D.C.
Speeds: 7,000—10,500—25,000—36,000
GRINDING W H E E L S :
y4" to 3 "
Diameter.
GRINDING SPINDLE E X T E N S I O N —
For
external grind-
ing the grinding wheel is IVA" from end of spindle
housing, 2-1/16" from end of motor housing. For
internal grinding w i t h mounted wheel ZVz", w i t h extension spindle 3-15/16".
The clamp head screw is on a center line w i t h the
armature shaft.
Packed i n Carrying Case.
The
P U L L E Y S : — # 1 — 55/64"; # 2 — 1 - 7 / 6 4 " ;
#3—1-47/64"; #4—1-63/64".
For
Page 12
machine complete weighs 13 Lbs.
Shipping Weight 20 Lbs.
other
details
see
Pages
2, 3, 6 and 7
MIMS Machinery Movers mimsriggers.com
J-45
with #2025 Spindle
Assembly
Recommended for Lathes
12" to 15" Swing
Equipment
Included
Specifications
4 Belts. Wheel Guard. # 1 1 0 Clamp N u t (13/4x2 3/4X
3/8"). Clamp Head Lock Pin. 5 Pulleys. 3 Wrenches.
# 2 0 6 7 External E x t e n s i o n Spindle w i t h 2 Each
Wheel Collars IV2" and 2 " Diameter and Nut.
GRINDING W H E E L S :
V2 H P . Universal A.C. and D.C.
Speeds:— 4,200— 5,800— 9,000
20,000—31,000—42,000
G R I N D I N G W H E E L S : VA" to 5" Diameter.
G R I N D I N G S P I N D L E E X T E N S I O N — For external grind-
3x^/2x1/2"-4xi/2x%"-5x3/8xy2".
# 2 0 2 0 Internal Extension Spindle 2" w i t h Arbor,
2 Wheel Collars VA" Diameter.
GRINDING W H E E L :
ing the grinding wheel is 1 " from end of spindle
housing, 2" from end of motor housing. F o r internal
grinding w i t h mounted wheel 2", w i t h recessed wheels
2xy4xV4".
# 2 0 9 7 — y 4 " Chuck Extension Spindle w i t h Sleeve
and y s " Collet. Mounted Wheels: — y4xy4xy8"—
y2xy4xy8"—ixy4xy4".
#402 BELT—10-31/32"xl7/32"
#442 BELT—10-31/32"xll/16"
#449 BELT—123/8"xl7/32"
#448 BELT—123/8"xll/16"
P U L L E Y S : — #1—55/64"; #2—1-7/64";
:^3_1.47/64"; #4—1-63/64"; #5—2-13/16".
33/4".
The clamp head screw is on a center line w i t h the
armature shaft.
Packed i n Carrying Case.
The
For
machine complete weighs 17 Libs.
Shipping Weight 32 Lbs.
other
details
see Pages
4, 5, 6, 7 and 10
''"^ J - 3 5
m
with #2025 Spindle
Assembly
Recommended for Lathes
9 " to 13" Swing
Equipment
Included
Specifications
3 Belts. Wheel Guard. # 2 1 7 3 Clamp N u t (13/8x2x
VA"). Clamp Head Lock Pin. 5 Pulleys. 3 Wrenches.
# 2 0 3 6 External Extension Spindle w i t h 2 Wheel
Collars i y 2 " and Nut. Grinding Wheels: 3x3/8x3/8"
—4x3/8x3/8".
# 2 0 2 1 Internal Extension Spindle 2 " w i t h Arbor and
Collar. Recessed Wheels:—3/8xy4xy8"—3/4xy4xy8".
^ 2 0 9 7 — y 4 " Chuck Extension Spindle w i t h Sleeve
and Vs" Collet. Mounted Wheels: — y4xy4xy8"—
y2xy4xy8"—ixy4xy4".
# 140 B E L T — 1 0 - 1 7 / 3 2 " x l 7 / 3 2 "
# 142 B E L T — 1 0 - 1 7 / 3 2 " x l l / 1 6 "
#2042 BELT—12-3/16"xl7/32"
P U L L E Y S : — # 1 — 55/64"; # 2 — 1 - 7 / 6 4 " ;
#3—1-47/64"; #4—1-63/64"; #5—2-13/16".
Va H P . Universal A.C. and D.C.
Speeds:— 5,500— 7,500—11,500
22,000—34,000—45,000
G R I N D I N G W H E E L S : W' to 4 " Diameter.
G R I N D I N G S P I N D L E E X T E N S I O N — For external grind-
ing the grinding wheel is 1 " from end of spindle
housing, 2-5/16" from end of motor housing. For i n ternal grinding w i t h mounted wheel 2", w i t h recessed
wheels 278".
The clamp head screw is on a center line w i t h the
armature shaft.
Packed i n Carrying Case.
The machine complete weighs 13 Lbs.
Shipping Weight 28 Lbs.
Page I I
For
other
details
see Pages
4, 5, 6, 7 and 10
MIMS Machinery Movers mimsriggers.com
Type
J-40
with #445 Spindle
Assembly
Recommended for Lathes
12" to 1 5 " Swing
Equipment
1/2 H P . Universal
(A.C. and D.C.)
Included
4 Belts. 2 each 1 " and 2 " Wheel Collars. Wheel Guard. # 1 1 0
Clamp N u t ( l % x 2 % x % " ) . Clamp Head Lock Pin. 5 Pulleys.
2 Wrenches.
GRINDING W H E E L S :
SPEEDS
4-200-5,800-9,000
21/2x1/2x1/2"—SxVaxVz"
#402 B E L T — 1 0 - 3 1 / 3 2 " x l 7 / 3 2 "
#442 BELT—10-31/32"xll/16"
#448 B E L T — 1 2 % " x l l / 1 6 "
#449 B E L T — 1 2 % " x l 7 / 3 2 "
# 4 2 0 and # 4 4 0
Spindle Assembly Speeds
20,000-31,000-42,000
P U L L E Y S : — # 1 — 5 5 / 6 4 " ; #2—1-7/64"; #3—1-47/64";
#4—1-63/64"; #5—2-13/16" Dia.
Packed i n Carrying Case.
The machine
complete
Shipping
For
other
details
weighs 17 Lbs.
weight 34 Lbs.
see Pages
3, 5, 6 and 7
'^'^ J - 3 0
0ith #1115 spindle
Assembly
Recommended for Lathes
9 " t o 13" Swing
Equipment
SPEEDS
5,500-7,500-11,500
Included
3 Belts. T w o 11/2" Wheel Collars. Wheel Guard. # 2 1 7 3 Clamp
N u t (13/8x2x1/4"). Clamp Head Lock Pin. 5 Pulleys. 2 Wrinches.
G R I N D I N G WHEELS:—3x3/sx3/8"—4x3/8x3/8 ".
#140 BELT—10-17/32"xl7/32"
# 1 4 2 B E L T — 1 0 - 1 7 / 3 2 " x l 1/16"
# 1 4 1 B E L T — 1 2 - 3 / 3 2 " x l 1/16".
P U L L E Y S : — # 1 — 5 5 / 6 4 " ; #2—1-7/64"; # 3 — 1 - 4 7 / 6 4 " ;
#4—1-63/64"; # 5 — 2 - 1 3 / 1 6 " D i a .
Packed i n Carrying Case.
The machine complete weighs 1^ Lbs.
Shipping weight 25 Lbs.
For
other
details
see Pages
3, 5, 6 a,nd 7
Page 13
# 1 1 4 0 and # 1 1 8 0
Spindle Assembly Speeds
22,000-34,000-45,000
V3 H.P. Universal
(A.C. and D.C.)
MIMS Machinery Movers mimsriggers.com
Type
J-2A
with #1125 Spindle
Recommended
Assembly
for Lathes
9 " t o 1 3 " Swing
Equipment
Included
Specifications
2 Belts. 2 Wheel Collars 11/2". Wheel Guard. # 1 7 3
Clamp N u t (IYSXIVAXVA").
Clamp Head Lock Pin.
4 Pulleys. 2 " Extension Spindle w i t h Arbor and Collar.
2 Wrenches.
GRINDING W H E E L :
RECESSED
3X%X%".
WHEELS:
ysxiAxVs"
—
s/gxiAxVa"
—
3/4x1/4x1/8".
1/3 H.P. Universal A.C. and D.C.
Speeds:—7,000—10,500—25,000—36,000
YS" to 3" Diameter
GRINDING W H E E L S :
G R I N D I N G S P I N D L E E X T E N S I O N — F o r external grind-
ing the grinding wheel is % " from end of spindle
housing, 1 3 ^ " from end of motor housing. For internal
grinding w i t h extension spindle 2 % " .
The clamp head screw is on a center line with the
armature shaft.
#102 BELT—10-3/32"xl7/32"
#149 BELT—10-3/32"xll/16"
The
P U L L E Y S : — # 1 — 5 5 / 6 4 " ; # 2 — 1-7/64";
#3—1-47/64"; #4—1-63/64".
Packed i n Carrying Case.
machine complete weighs IOV2 Lbs.
Shipping Weight 20 Lbs.
For
^^^^^^^^^^
other
details
see Pages
Type
2, 3 and 6
J-2A1
with #1125 Spindle
Assembly
Recommended for Lathes
9 " to 13" Swing
Equipment
Included
Specifications
2 Belts. 2 Wheel Collars I I / 2 " . Wheel Guard. # 2 1 7 3
Clamp N u t (13/8x2xi/4"). 4 Pulleys. 2 1 / 2 " Extension
Spindle w i t h Arbor and Collar. Hollow Head Cap
Screw w i t h key. 2 Wrenches.
G R I N D I N G W H E E L : 3x3/8x3^".
RECESSED WHEELS: —
YsxyAxVs"
5/8x1/4x1/8" —
3/4x1/4x1/8".
#102 BELT—10-3/32"xl7/32"
#149 BELT—10-3/32"xll/16"
P U L L E Y S : — # 1 — 55/64"; # 2 — 1-7/64";
1/3 H P . Universal A.C. and D.C.
Speeds:—7,000—10,500—25,000—36,000
GRINDING W H E E L S :
3/g" t o 3 " Diameter
G R I N D I N G S P I N D L E E X T E N S I O N — For external grind-
ing^ the grinding wheel is % " from end of spindle
housing, 1 % " from end of motor housing. For internal
grinding w i t h extension spindle 2 y s " .
The clamping screw is IVa" i n front of the center
line of the armature shaft.
The
machine
#3—1-47/64"; #4—1-63/64". '
complete
Shipping
Packed i n Carrying Case.
For
Page 14
other
details
Weight
weighs 13 Lbs.
21 Lbs.
see Pages
2, 3 and 6

Download Report