FLUID MANAGEMENT SOLUTIONS FHD/FJD 040-080 Series L-Type Hydraulic Filter Assemblies Hydraulic & Lubrication System Return-Line Filter Assemblies Features • • • • • 150 psi (10 bar) operating pressure 40 and 80 gpm (151 & 303 lpm) nominal flow rates Elements available with ßx(c) ≥ 1,000 Glas-Tech® media 1¼” NPT ports FHD series assembly designed for military style AN6236-3 elements A more robust and reliable filter assembly Technical Data Pressure & Temperature Rating Operating Pressure: 150 psi (10 bar) Proof Pressure: 225 psi (16 bar) Burst Pressure: 400 psi (28 bar) Operating Temperature: -40ºF to +250ºF (-40ºC to +121ºC) Materials of Construction Cover:Steel Case:Steel Bypass Options Bypass Valve Setting: 20 psid (1.4 bar) ±10% Product Description The FHD/FJD 040-080 Series filter assemblies are ideally suited for low pressure return-line applications. Due to the high dirt holding capacity the FHD/FJD series is ideally suited for use in low pressure lubrication systems as well as in industrial and military test stands. These filter assemblies are rated for 150 psi (10 bar) service and flows to 40 or 80 gpm (151 or 303 lpm). The FHD/FJD 040 is a single element filter while the FHD/FJD 080 uses two elements. Filter Assembly (Housing & Element) Weight Size FHD/FJD-040 FHD/FJD-080 Weight 19 lbs (8.6kg) 30 lbs (13.6kg) Filtration Rating FHD/FJD L-Type Hydraulic Filter Assemblies Multipass Test results per old ISO 4572 and new ISO 16889 test procedures Particle size (x) in microns at which the Beta Ratio (ß) is greater than or equal to the indicated value (200 or 1000). Per ISO 45729 Per ISO 16889 Code ßx ≥ 200 ßx(c) ≥ 200 ßx(c) ≥ 1000 G 3 5 7 H 6 7 9 K 12 12 15 J 23 21 24 Code Micron Rating Media B 3 µm Cellulose C 10 µm Cellulose D 25 µm Cellulose Flow Rate/Pressure Drop Curves FHD Elements with Housing FHD 040 Series - Flow vs Pressure Drop FHD 080 Series - Flow vs Pressure Drop Liters/minute 0 25 50 75 Liters/minute 100 125 150 30 0 100 150 200 250 300 30 2.0 2.0 25 1.5 15 JC 10 5 GC 1.0 HC 0.5 DC 0 10 20 HC 5 0.5 CC 0 40 1.0 GC 10 0.0 30 BC JC 15 CC 0 1.5 20 PSID BC BAR 20 BAR 25 PSID 50 0 20 US Gallons/minute 40 60 DC 0.0 80 US Gallons/minute FJD Elements with Housing FJD 040 Series - Flow vs Pressure Drop FJD 080 Series - Flow vs Pressure Drop Liters/minute 0 50 Liters/minute 100 150 0 20 100 150 200 250 300 20 1.2 DC 0.8 HC 0.6 1.0 HC JC CC 10 GC 0.8 BC 0.6 0.4 5 0.2 0 0.0 0 10 20 US Gallons/minute 30 40 BAR 10 GC 15 BAR JC CC 1.2 1.0 PSID BC 15 PSID 50 0.4 5 DC 0.2 0 0.0 0 20 40 US Gallons/minute 60 80 Pressure drop curves are for clean elements using 150 SUS (32 cSt) petroleum base hydraulic fluid of 0.9 S.G. Filter Assembly ΔP = Housing ΔP + Element ΔP * Dimensions in inches (mm) Coupling Assembly 10.0 (254) 1 1/4-11.5 NPTF Inlet 1.3 (33) A 0.4 (10) 9.6 (244) 4.4 (112) 5.1 (130) B 7.0 (178) C E Dimensions Nominal Flow 040 D 080 Dimension A 11.9 (302) 20.5 (521) Dimension B 10.9 (277) 19.5 (495) Dimension C 2.6 (66) 9.8 (249) Dimension D 3.2 (81) 3.4 (86) Dimension E 7.6 (193) 16.2 (411) 1 1/4"-11.5 NPTF Ø7.5 (Ø191) Outlet FHD/FJD L-Type Hydraulic Filter Assemblies Dimensions* Dimensions* * Dimensions in inches (mm) Coupling Assembly 1 1/4-11.5 NPTF FHD/FJD L-Type Hydraulic Filter Assemblies 10.0 (254) Inlet 1.3 (33) A 0.4 (10) 9.6 (244) 4.4 (112) B 7.0 (178) 5.1 (130) C E Dimensions Nominal Flow 040 11.9 (302) 20.5 (521) Dimension B 10.9 (277) 19.5 (495) Dimension C 2.6 (66) 9.8 (249) Dimension D 3.2 (81) 3.4 (86) Dimension E 7.6 (193) 16.2 (411) Ordering Information TBL 1 Type Code TBL 3 TBL 4 TBL 2 Ø7.5 (Ø191) Outlet TBL 5 TBL 6 TBL 7 TBL 8 TBL 9 TBL 10 Filtration Rating Table 3 Code 1 1/4"-11.5 NPTF XXX XXX - X X - X X X X X X Assembly: Table 1 D 080 Dimension A Micron Rating Media Collapse Table 4 Code Collapse Rating Seals Table 5 Code Material FHD G ß7(c) ≥ 1000 Glas-Tech C 75 psid (5bar) B Buna FJD H ß9(c) ≥ 1000 Glas-Tech N No Element *V Viton® K ß15(c) ≥ 1000 Glas-Tech *E Ethylene Propylene J ß24(c) ≥ 1000 Glas-Tech * FHD Only Size Table 2 Code Nominal Flow 040 40 gpm (151 lpm) 080 80 gpm (303 lpm) Indicator Table 8 Code Option N None B 3 µm Cellulose C 10 µm Cellulose Table 6 D 25 µm Cellulose Code Option Code Option F 1¼” NPT O None N No Filter Element Table 9 Bypass Code Port Gauge Ports Table 7 Drain Port Table 10 Option Code Option B 20 psid (1.4 bar) ± 10% D Drain Port Only N None W Vent, Fill & Drain Port Note: Fill & drain ports are 5/8”-18 thread Element Ordering Instructions: Utilize the codes in tables 1 through 5 to assemble a PTI part number or pick a replacement part number from the Replacement Element columns in Table 3 Element: XXX - XXX - X X - X TBL 1 TBL 2 TBL 3 TBL 4 Type Table 1 TBL 5 FHD080 & FJD080 Filter Assemblies require two (2) FHD-040 or FJD-040 Elements Filtration Rating Table 3 Collapse Table 4 Code Collapse Rating C 75 psid (5 bar) Seals Table 5 Replacement Element Replacement Element Part # FHD-040/080* Part # FJD-040/080* Code Code Micron Rating Media FHD G Glas-Tech FHD-040-GC FJD-040-GC-B FJD ß7(c) ≥ 1000 B Buna H ß9(c) ≥ 1000 Glas-Tech FHD-040-HC FJD-040-HC-B ***V Viton® K ß15(c) ≥ 1000 Glas-Tech FHD-040-KC FJD-040-KC-B ***E J ß24(c) ≥ 1000 Glas-Tech FHD-040-JC FJD-040-JC-B Ethylene Propylene B 3 µm Cellulose FHD-040-BC FJD-040-BC-B C 10 µm Cellulose 30316-20** FJD-040-CC-B D 25 µm Cellulose 50241 63104-03 Table 2 Size Code Nominal Flow 040 40 gpm (151 lpm) Code Material *** Available Only On FHD Series FJD Series Includes Seals FHD Series Does Not Include Seals Viton® is a registered trademark of DuPont Performance Elastomers ** For assemblies with Ethylene Propylene or Viton® seals use element P/N 7516361 PTI Technologies Inc. 501 Del Norte Boulevard - Oxnard, California 93030 800-331-2701 • 805-604-3700 www.ptitechnologies.com F01142 Rev.6 ©2012 An ESCO Technologies Company. All Rights Reserved. PTI Technologies, Inc is certified to ISO Standards
© Copyright 2024 ExpyDoc
