Datasheet FJM-MAN Manual Monitor Revision 110615 Datasheet FJM-WTO Page 11 of of 44 Page Revision 110615 Page 1 of 4 Oscillating Monitor General description A range of manually operated fog/jet water/foam monitors with exceptional flow characteristics, optimising throw range with delivery of water or foam in jet form or as a spray pattern. The range is available for a number of alternate mounting positions, with two main types: the FJM and FJM-S, where the ‘S’ version has an in-built foam concentrate inductor, eliminating the need for a separate proportioning system. Application description The range of fog/jet monitors are designed for easy operation, reliability in use and over time and lower weight, due to the selection of build materials employed. FJM monitors have a wide operating range, site adjustable for maximum flexibility to take local conditions into account and still maintain the highest level of performance. Note that when running any of the FJM-S range of monitors, the monitor needs to be adjusted to nominal capacity for accurate proportioning. •• •• •• •• • •• • Product features Wide flow range Adjustable flow Compact balanced design Low weight Easily manoeuvred due to low friction bearings Long throw length Adjustable stream pattern Corrosion resistant construction of stainless steel and bronze Connections Foam/water inlet: flanged according to DIN PN 16 or ANSI 150 lbs or JIS 10K Optional components Built-in inductor for all models (“S” version) Gear operation; optional for FJM-150, standard for FJM-200 Suction hose and valve •• • • • Listings and approvals Marine approvals (DNV, LRS, BV) Factory Mutual (FM); FJM-80;FJM-100; FJM-150; FJM-200 China National Test Centre Approval (TFRI); FJM-80; FJM-100; FJM-150 and S-versions Russian Maritime Register of Shipping (RMRS); FJM-100EL, FJM-150EL Russian State Fire Academy FJM Monitors - Capacity Ranges 30000 Recommended max capacity 20000 FJM-200 l/min 15000 FJM-150 10000 FJM-100 5000 4000 FJM-80 3000 2000 4 5 6 7 8 9 10 11 12 13 14 15 16 bar Technical changes reserved without notice Incendium Fire System Solutions Tel: +46 303 44 00 30 E-mail: info@incendiumfire.com www.incendiumfire.com Datasheet FJM-MAN Manual Monitor Revision 110615 Page 2 of 4 FJM-80 S FJM-80 300 FJM-80 Monitor - Range of Jet Deduct 10% for self induction nozzle. Minimum range at wind still conditionsl/min meters 350 80 ~295 ~295 3,700 70 3,000 2,000 80 DIN PN 16 or 3” ANSI 150 lbs or 80 JIS B 2210 10 K 150 150 60 1,000 50 Male 11/ ” BSP 4 40 30 455 455 20 10 1 FJM-100 S 4 5 6 7 8 9 10 11 12 bar FJM-100 Monitor - Range of Jet 350 Deduct 10% for self induction nozzle. Minimum range at wind still conditions l/min meters 90 6,000 5,000 4,000 3,000 80 ~335 380 ~335 3 Reaction force (N) = 0.233 x Q (l/min) x √p (bar) Foam FJM-100 2 70 2,000 170 170 60 100 DIN PN 16 or 4” ANSI 150 lbs or 100 JIS B 2210 10 K Male 2” BSP 50 40 520 520 30 20 10 1 Foam 2 3 4 5 6 7 8 9 10 11 12 bar Reaction force (N) = 0.233 x Q (l/min) x √p (bar) Technical changes reserved without notice Incendium Fire System Solutions Tel: +46 303 44 00 30 E-mail: info@incendiumfire.com www.incendiumfire.com Datasheet FJM-MAN Manual Monitor Revision 110615 Page 3 of 4 FJM-150 FJM-150 S FJM-150 Monitor - Range of Jet Deduct 10% for self induction nozzle. Minimum range at wind still conditions l/min meters 100 650 11,700 10,000 8,000 6,000 90 ~760 ~760 550 80 5,000 222 222 70 60 150 DIN PN 16 or 6” ANSI 150 lbs or 150 JIS B 2210 10 K 50 40 Foam conc. 30 Male 2” BSP 920 920 20 10 1 2 3 4 5 6 7 8 9 10 11 12 bar Reaction force (N) = 0.233 x Q (l/min) x √p (bar) ~690 Foot print ~200 ~590 ~1/3 of R R Male 2” BSP ~1/3 of R 264 150 DIN PN 16 or 6” ANSI 150 lbs or 150 JIS B 2210 10 K ~790 ~790 264 ~200 FJM Monitors - Average Fog Pattern (in still air) FJM-150 S G 2/3 FJM-150 G Foam Technical changes reserved without notice Incendium Fire System Solutions Tel: +46 303 44 00 30 E-mail: info@incendiumfire.com www.incendiumfire.com Datasheet FJM-MAN Manual Monitor Revision 110615 Page 4 of 4 ~920 279 282 ~720 200 DIN PN 16 or 8” ANSI 150 lbs or 200 JIS B 2210 10 K ~1010 ~1010 Foam conc. Male 2” BSP Order information - please specify: 1. Part number 4. Capacity: flow and pressure 2. Type 5 Motor and Solenoid voltage 3 Flange type 6. Foam induction (S-version) Description Part No. FJM-80 DIN/ANSI FJM-80 DIN/JIS FJM-80 S DIN/ANSI, excl suction hose FJM-80 S DIN/JIS, excl suction hose Suction hose 1¼” 3 mtr 10108407 10108409 10108412 10108415 10108418 FJM-100 DIN/ANSI FJM-100 DIN/JIS FJM-100 S DIN/ANSI, excl suction hose FJM-100 Suction hose 2” 3 mtr 10101403 10101406 10101409 10101412 FJM-150 DIN/ANSI/JIS FJM-150 S DIN/ANSI, excl suction hose FJM-150 G DIN/ANSI/JIS FJM-150 S G DIN/ANSI/JIS, excl suction hose FJM-150 Suction hose 2” 3 mtr 10105304 10105307 10135310 10135313 10105316 FJM-200 G DIN FJM-200 G ANSI FJM-200 S G ANSI, excl suction hose 10102127 10102129 10102132 Reaction force (N) = 0.233 x Q (l/min) x √p (bar) Performance Data FJM Series - Standard 80 Water capacity 3,700 l/min Design pressure 16 bar Rotation 360º Elevation -60º / +90º Connection flange Stud bolt Weight 14 kg / 31 lbs 100 6,000 l/min 16 bar 360º -60º / +90º Stud bolt 22 kg / 49 lbs 150 11,700 l/min 16 bar 360º -60º / +70º Open hole 57 kg / 126 lbs 200 20,000 l/min 13 bar 360º -60º / +70º Open hole 90 kg / 199 lbs 100 6,000 l/min 320 l/min -45º / +90º 2” BSP male 24 kg / 53 lbs 150 11,700 l/min 600 l/min -45º / +70º 2” BSP male 60 kg / 132 lbs 200 20,000 l/min 600 l/min -45º / +70º 2” BSP male 93 kg / 205 lbs Performance Data FJM-S Series Built-in inductor 80 Water capacity 3,700 l/min Foam capacity 170 l/min Elevation -45º / +90º Suction connection 11/ ” BSP male Weight 15 kg / 33 lbs 2 Technical changes reserved without notice Incendium Fire System Solutions Tel: +46 303 44 00 30 E-mail: info@incendiumfire.com www.incendiumfire.com
© Copyright 2024 ExpyDoc
