ACCU-LOCK 2668.2. Halteeinsatz für Schnellwechsel-Schneidstempel, leichte Ausführung 2668.3. Halteeinsatz für Schnellwechsel-Schneidstempel, schwere Ausführung Anwendungsbeispiel: d3 12 14 14 14 16 16 16 16 d4 14,6 16,6 16,6 16,6 18,6 18,6 18,6 18,6 l1 25,7 25,7 25,7 25,7 25,7 25,7 25,7 25,7 Bestell-Nr. 2668.3.10 2668.3.13 2668.3.16 2668.3.20 2668.3.25 2668.3.32 2668.3.40 Schneidstempel-ø d2 10 13 16 20 25 32 40 d3 16 20 20 20 20 20 20 d4 19,6 24,6 24,6 24,6 24,6 24,6 24,6 l1 34,7 34,7 34,7 34,7 34,7 34,7 34,7 d2 4,5 Schneidstempel-ø d2 6 10 13 16 20 25 32 38 l 1±0,13 Bestell-Nr. 2668.2.06 2668.2.10 2668.2.13 2668.2.16 2668.2.20 2668.2.25 2668.2.32 2668.2.38 2668.3. 0 -0,08 2668.2. 2666.05.02 d 3±0,005 d2 Kugelauslösewerkzeug, gerade Form 05/2014 © Copyright by FIBRO GmbH Printed in Germany on paper bleached without chlorine Einbaubeispiel: Einbaumaße für 2668.2. / 2668.3. Aufnahmeplatte für SchnellwechselSchneidstempel e Druckplatte 4,55 +0,13 Art.-Nr. 2.5402.00.1109.11000 d 4±0,13 Bestell-Nr. 2668.2.06 2668.2.10 2668.2.13 2668.2.16 2668.2.20 2668.2.25 2668.2.32 2668.2.38 a 6 10 13 16 20 25 *32 *38 b 6,5 9,0 10,5 12,0 14,0 16,5 20,0 23,0 c 12,013 14,013 14,013 14,013 16,013 16,013 16,013 16,013 d 15,0 17,0 17,0 17,0 19,0 19,0 19,0 19,0 e 25,7 25,7 25,7 25,7 25,7 25,7 25,7 25,7 2668.3.10 2668.3.13 2668.3.16 2668.3.20 2668.3.25 2668.3.32 2668.3.40 10 13 16 20 25 *32 *40 10,0 11,5 13,0 15,0 17,5 21,0 25,0 16,013 20,013 20,013 20,013 20,013 20,013 20,013 20,0 25,0 25,0 25,0 25,0 25,0 25,0 34,7 34,7 34,7 34,7 34,7 34,7 34,7 b +0,025 c +0,025 a +0,010 +0,005 bis Ø 25 *a +0,015 +0,008 ab Ø 32 Änderungen vorbehalten d +0,75 1 ACCU-LOCK Fixture Device for Ball-Lock Punches, light duty Fixture Device for Ball-Lock Punches, heavy duty 2668.2. 2668.3. Application example: d3 12 14 14 14 16 16 16 16 d4 14,6 16,6 16,6 16,6 18,6 18,6 18,6 18,6 l1 25,7 25,7 25,7 25,7 25,7 25,7 25,7 25,7 Punch ø d2 10 13 16 20 25 32 40 Order No 2668.3.10 2668.3.13 2668.3.16 2668.3.20 2668.3.25 2668.3.32 2668.3.40 d3 16 20 20 20 20 20 20 d4 19,6 24,6 24,6 24,6 24,6 24,6 24,6 l1 34,7 34,7 34,7 34,7 34,7 34,7 34,7 d2 d 3±0,005 2666.05.02 Ball release tool, straight d2 d 4±0,13 Mounting example: Build-in dimensions for 2668.2. / 2668.3. Retainer for ball-lock punches e 4,55 +0,13 Pressure plate Order No 2668.2.06 2668.2.10 2668.2.13 2668.2.16 2668.2.20 2668.2.25 2668.2.32 2668.2.38 a 6 10 13 16 20 25 *32 *38 b 6,5 9,0 10,5 12,0 14,0 16,5 20,0 23,0 c 12,013 14,013 14,013 14,013 16,013 16,013 16,013 16,013 d 15,0 17,0 17,0 17,0 19,0 19,0 19,0 19,0 e 25,7 25,7 25,7 25,7 25,7 25,7 25,7 25,7 2668.3.10 2668.3.13 2668.3.16 2668.3.20 2668.3.25 2668.3.32 2668.3.40 10 13 16 20 25 *32 *40 10,0 11,5 13,0 15,0 17,5 21,0 25,0 16,013 20,013 20,013 20,013 20,013 20,013 20,013 20,0 25,0 25,0 25,0 25,0 25,0 25,0 34,7 34,7 34,7 34,7 34,7 34,7 34,7 b +0,025 c +0,025 2 a +0,010 +0,005 up to Ø 25 *a +0,015 +0,008 from Ø 32 d +0,75 subject to alterations Order-No. 2.5402.00.1109.11000 Punch ø d2 6 10 13 16 20 25 32 38 05/2014 © Copyright by FIBRO GmbH Printed in Germany on paper bleached without chlorine Order No 2668.2.06 2668.2.10 2668.2.13 2668.2.16 2668.2.20 2668.2.25 2668.2.32 2668.2.38 2668.3. l 1±0,13 0 4,5 -0,08 2668.2.
© Copyright 2025 ExpyDoc