5C Collet Chucks

5C Collet Chucks
Plain Back and Adjustable available, 0.0004” T.I.R.
Perfect for small parts, turning,
facing, drilling, boring, grinding, and
milling operations on center lathes,
grinding machines, milling machines,
and indexers.
5C Collet Chucks, Plain Back, T.I.R. 0.0004”
Two pinion design.
High quality forged steel body.
Scroll and pinions are hardened and ground.
Great for grinding, turning, milling, & boring operations.
Back plate requires skim cut on the chuck side.
Chuck
Dia.
Mounting
RPM
T.I.R.
Part #
5"
Plain Back
6000
0.0004”
1-401-0500
Mounting
Part #
5"
D1-3
FLD-125D3
5”
D1-4
FLD-125D4
5”
2-3/16 -10
FLD-125T4
3.7402H6
Chuck
Dia.
5”
Adapters
• All ‘D’ adapters come with
camlock studs and set screws
*NOTE: Skim Cut on the face
of the adapter flange and boss
is required to make a press fit
between adapter boss and chuck
counterbore.
0.760”
.197”
3.476”
•
•
•
•
•
3.476”
2.205”
5”
• Two pinion design.
• High quality forged steel body.
• Scroll and pinions are hardened and ground.
• Great for grinding, turning, milling & boring operations.
• Fine adjusting screws (4) set up the chuck on a steel
fully finished adapter within 0.0004" T.I.R.
2.1654”H7
5C Collet Chucks, Adjustable, T.I.R. 0.0004”
.591”
Chuck
Dia.
Mounting
RPM
T.I.R.
Part #
5"
Plain Back
6000
0.0004”
1-401-0599
4.724”
5”
Adapters
Chuck
Dia.
Mounting
Part #
5"
D1-3
FLA-125D3
5”
D1-4
FLA-125D4
5”
1-1/2” - 8 - UN -2B
FLA-125T2
5”
2-3/16” - 10 Hardinge
FLA-125T4
5”
2-1/4” - 8 UN-2B
FLA-125T5
• All ‘D’ adapters come with spindle
mounting camlock studs and set screws
• All adapters are heat treated for longer life
• All adapters do not require any additional
machining
www.gts-tools.com | 800.985.5390 | [email protected]

Download Report