Discover the PV backsheet with a ‘plus’ ARZONA BS+ The FPU backsheet F P + U Trusted Fluoropolymer technology for Weathering and Chemical resistance Superior Quality Polyester core for Electrical insulation, Hydrolytic and Dimensional stability UV protective U-layer for Adhesion to encapsulant and Extra Protection against UV Power by Technology ARZONA BS+ The FPU backsheet UV protective U-layer (1µ) UV protection and Adhesion to encapsulant Cell side PV dedicated Superior Quality PET (265µ) Electrical insulation Hydrolytic behavior Mechanical properties (stress load) Trusted Fluoropolymer (15µ) Weatherability Chemical resistance Conventional wisdom - Excessive layer thickness and non-productive adhesive layers. - Power efficiency not achieved unless high cost of UV protection. - Durability risk and risk of efficiency loss due to inconsistent polyester quality. FPU wisdom + Right on-need layer thickness and structure thanks to state-of-art coating technology. + Maximum power efficiency thanks to extra protection of the backsheet’s cell side against UV radiation. Great durability thanks to polyester + with superior dimensional stability. MORE INFO ARZONA BS+ Key data Value Unit Method Total structure thickness 281 µm ASTM D-374 Tensile strength (MD) >160 N/mm² ASTM D-882 Tensile strength (TD) >175 N/mm² ASTM D-882 Elongation at break (MD) >100 % ASTM D-882 Elongation at break (TD) >100 % ASTM D-882 Dimensional stability/shrink (MD) <0.5 % ASTM D-1204 Agfa.com/arzona Dimensional stability/shrink (TD) <0.3 % ASTM D-1204 Peel strength to EVA >40* N/cm AGFA, based on IEC82/747/NP Partial discharge 1063 VDC IEC 6 0664-1 Breakdown voltage >24 kV ASTM D-149 Moisture Vapor Transmission Rate 2.2 g/m² day ASTM F-1249 (*) based on testing with various encapsulant brands Quality from a global player The Agfa-Gevaert Group - Agfa in short - is a global leader in the development, manufacturing and marketing of a wide variety of hi-tech functional foils and chemicals used in the Printing industry and the Healthcare sector as well as a large number of highly specialized markets such as Security and ID, Printed Electronics and Solar Photovoltaic. The Group has production facilities around the world, with the largest production and research centers in Belgium, the United States, Canada, Germany, France, Italy and China. Flexible product delivery across Europe and Asia is ensured thanks to the presence of production and finishing centers in Mortsel, Belgium and Wuxi, PRC. © April, 2014 - All rights reserved. Published by Agfa-Gevaert N.V. - B-2640 Mortsel, Belgium ARZONA, Agfa and the Agfa rhombus are trademarks of Agfa-Gevaert N.V., Belgium, or its affiliates. All information contained herein is intended for guidance purposes only, and characteristics of the products described in this publication should not be used for specification purposes. Agfa-Gevaert strives to provide as accurate information as possible, but shall not be responsible for any typographical error. Power by Technology
© Copyright 2024 ExpyDoc
