Reliance Curtain Wall with FRP Pressure Plate 2-1/2”x 10-3/8” - 1” Glazing Table of Contents (Drawing numbers ie H3604 used as CAD detail reference only ) Elev-Rcw-Frp-2.5x6.25 H3601-Head-Horizontal H3604-Sill-Horizontal H3605-Typical-Horizontal H3608-Roll-Over-Horiz H3609-Roll-Under-Horiz H3618-Pocket-Frame-OperWin H3619-Flat-FrameOperWin V3602-Mullion V3605-Heavy-Mullion V3608-Jamb-Tubular V3617-90-Inside-Corner V3621-90-Outside-Corner H0042-Steel-Anchor H3625-F-T-Anchors H3630-Steel Reinforcing H3643-Mullion Splice H3146-Spandrel Options H3148-Vision-Options -March 2014 Note: For Door Models visit : http://www.oldcastlebe.com/node/1045/47?cat=51 H3425 ANCHOR H3301 HEAD JAMB V3308 90 ISC V3317 TYP MULL V3302 90 OSC V3315 HEAVY V3305 V3321 SPANDREL H3146 OPTIONS STEEL H0042 ANCHOR SPLICE H3643 STEEL H3630 REINF. VISION H3148 OPTIONS H3425 H3318 H3319 TYP HORIZ. H3305 SILL H3304 MODEL: Elev-Rcw-2.5x10.375-w-Frp RELIANCE CURTAIN WALL -w-FRP PRESSURE PLATE OPERABLE WINDOW 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com Elev-RcwFrp-10.375- -March 2014 SEE TOP VIEW FOR T-ANCHOR INFO. ANCHOR BOLT (BY OTHERS) WW-325 TYP. MULL CAP ATTACH W/FS-320 2 1/2" WW-216 FACE CAP 1/2" PRIMARY SEAL AND BACKER ROD MARRY WITH VERTICAL SEAL (BY OTHERS) D.L.O WW-801 HEAD WEEP HOLE C.L. DLO WW-189-01 SHEAR BLOCK ATTACH TO MULLION W/ (2) FS-9 ATTACH TO HORIZ W/ (2) FS-115 GP-103 EPDM GASKET BOTH SIDES AW-162 PRESSURE PLATE W/GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 @ 9" O.C. 10 3/8" Reliance-FRP - Head Horizontal - H3301 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com H3301-Head-Horizontal- -March 2014 10 3/8" D.L.O. 1" GLASS GP-109 SETTING BLOCK (2) PER LITE WW-189-01 SHEAR BLOCK ATTACH TO MULLION W/ (2) FS-9 ATTACH TO HORIZ W/ (2) FS-115 WW-216 FACE CAP AW-162 FRP PRESS PLATE 1/2" 2 1/2" WW-802 SILL PRIMARY SEAL AND BACKER ROD MARRY WITH VERTICAL SEAL (BY OTHERS) WW-325 TYP. MULL CAP ATTACH W/FS-320 SEE TOP VIEW FOR T-ANCHOR INFO. Reliance-FRP - Sill Horizontal - H3304 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com H3304-Sill-Horizontal- -March 2014 D.L.O. 1" GLASS GP-109 SETTING BLOCK (2) PER LITE D.L.O 2 1/2" WW-216 FACE CAP WW-810 HORIZONTAL WEEP HOLE C.L. DLO WW-189-01 SHEAR BLOCK ATTACH TO MULLION W/ (2) FS-9 ATTACH TO HORIZ W/ (2) FS-115 GP-103 EPDM GASKET BOTH SIDES AW-162 PRESSURE PLATE W/GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 @ 9" O.C. 10 3/8" Reliance-FRP - Horizontal - H3305 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com H3305-Typical-Horizontal- -March 2014 WW-216 FACE CAP 2 1/2" "Pocket frame" operable window (go to www.oldcastlebe.com/products /architectural-windows for the most current details and vent options D.L.O WW-810 HORIZONTAL WEEP HOLE C.L. DLO WW-189-01 SHEAR BLOCK ATTACH TO MULLION W/ (2) FS-9 ATTACH TO HORIZ W/ (2) FS-115 GP-103 EPDM GASKET BOTH SIDES AW-162 PRESSURE PLATE W/GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 @ 9" O.C. 10 3/8" Reliance-FRP - Horizontal @ Operable Window - H3318 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com H3318-Pocket-Frame-OperWin- -March 2014 "Flat frame" operable window (go to www.oldcastlebe.com/products /architectural-windows for the most current details and vent options D.L.O WW-810 HORIZONTAL WW-216 FACE CAP 2 1/2" WW-122 POCKET FILLER ATTACH W/FS-322 WEEP HOLE C.L. DLO GP-103 EPDM GASKET BOTH SIDES WW-189-01 SHEAR BLOCK ATTACH TO MULLION W/ (2) FS-9 ATTACH TO HORIZ W/ (2) FS-115 AW-162 PRESSURE PLATE W/GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 @ 9" O.C. 10 3/8" Reliance-FRP - Horizontal @ Operable Window - H3319 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com H3319-Flat-Frame-OperWin- -March 2014 WW-810 MULLION WW-105-02 T ANCHOR 10 3/8" WW-189-01 SHEAR BLOCK AW-162 FRP PRESSURE PLATE W/GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 @ 9" O.C. WW-325 MULL CAP ATTACH W/FS-320 1" GLASS WW-216 FACE CAP GP-103 EPDM GASKET D.L.O. 2 1/2" D.L.O. Reliance-FRP - Vertical - V3302 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com V3302-Vertical-Mullion- -March 2014 WW-800 MULLION WW-105-01 T ANCHOR 10 3/8" WW-189-01 SHEAR BLOCK AW-162 FRP PRESSURE PLATE W/GP-107 ISOLATOR. FIELD ATTACH WITH FS-325 @ 9" O.C. WW-325 MODIFIED MULL CAP ATTACH W/FS-320 1" GLASS WW-216 FACE CAP D.L.O. 2 1/2" GP-103 EPDM GASKET D.L.O. Reliance-FRP - Heavy Vertical - V3305 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com V3305-Heavy-Mullion-Reinf- -March 2014 WW-810 MULLION WW-106-02 F ANCHOR WW-189-01 SHEAR BLOCK 10 3/8" WW-122 POCKET FILLER ATTACH W/FS-325 AW-162 FRP PRESSURE PLATE WW-325 MODIFIED MULL CAP ATTACH W/FS-320 1" GLASS WW-216 FACE CAP GP-103 EPDM GASKET 1/2" BACKER ROD/SEALANT (BY OTHERS) 2 1/2" D.L.O. Reliance-FRP - Jamb - V3308 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com V3308-Jamb-Mullion- February 2014 2 1/2" WW-810 MULLION AN-2 ALUM ANGLE 1" X 1" X 1/8" WW-189-01 SHEAR BLOCK BACKER ROD & WEATHER SEAL (BY OTHERS) 10 3/8" WW-122 POCKET FILLER ATTACH W/FS-115 24" O.C. (MIN 3 PER LITE) AW-162 FRP PRESSURE PLATE WW-325 MODIFIED MULL CAP ATTACH W/FS-320 #10x1/2" U-DRIVE AN-1 ALUM ANGLE 3/4" X 3/4" X 1/8" .125" FORMED ALUM CLOSURE AN-1 ALUM ANGLE SHOP ATTACHED AT HEAD & SILL FOR PERIMETER SEALANT 1" GLASS WW-216 FACE CAP GP-103 EPDM GASKET Reliance-FRP - 90 Outside Corner - V3315 1/2" BACKER ROD/SEALANT (BY OTHERS) 2 1/2" 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com D.L.O. V3315-90-Outside-Corner- -March 2014 WW-810 MULLION AN-1 ALUM ANGLE (3/4"x 3/4" x 1/8") 10 3/8" WW-189-01 SHEAR BLOCK AW-162 FRP PRESSURE PLATE .125" FORMED ALUM CLOSURE WW-325 MODIFIED MULL CAP ATTACH W/FS-320 AN-1 ALUM ANGLE SHOP ATTACHED AT HEAD & SILL FOR PERIMETER SEALANT WW-122 POCKET FILLER ATTACH W/FS-322 (MIN 3 PER LITE) BACKER ROD/SEALANT & SHIMS (BY OTHERS) GP-103 EPDM GASKET COSMETIC SEAL (BY OTHERS) 2 1/2" WW-216 FACE CAP 1/2" 1" GLASS Reliance-FRP - 90 Inside Corner - V3317 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com V3317-90-Inside-Corner- 2 2" 1/ -2 W W 20 ER LL FI 5 17 -1 W W U M N IO LL -March 2014 10 3/8" WW-323 MULL CAP WW-1177-01 SHEAR BLOCK (2) WW-302 ZONE PLUG BOTH SIDES AW-162 PRESSURE PLATE BOTH SIDES WW-132 ADAPTOR W/FS-325 9" O.C WW-105-06 -T- ANCHOR AW-118 FACE CAP BOTH SIDES 4" Reliance-FRP - 90 OSC at Vision - V3321 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com V3321-90-Outside-Corner- WELD AS REQUIRED BY INSTALLER HOLE IN ANCHOR AT DEAD LOAD SLOT IN ANCHOR AT WIND LOAD FLOOR SLAB OR BEAM TAP PLATE WITH TAPPED HOLES FOR ANCHOR BOLT ANCHOR BOLT (BY OTHERS) 1/16" NYLON SLIP PAD BY INSTALLER Plan View Jamb Option Plan View Intermediate Mullion STEEL ANCHOR DESIGN DETERMINED BY ENGINEER SEE APPROVED SHOP DWGS Side View ACCESS HOLE -March 2014 Plan View Jamb Option Plan View Single Mull Corners 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com Standard Curtainwall Steel Anchor - H0042 H0042-Steel-Anchor- 5/16" 3/16" GP-118 -March 2014 GP-103 1/2" GP-103 BOTH SIDES (TYP.) GP-103 GP-117 9/16" GP-103 BOTH SIDES (TYP.) Glass Chart GP-117 BOTH SIDES GP-103 BOTH SIDES 3/8" 1/4" *WW-1128 SEE NOTE 3 *WW-1318 SEE NOTE 3 Glass Gasket Exterior Size 0.1875" GP-118 Gasket Interior GP-103 Glazing Adapter WW-130 0.250" GP-103 GP-103 WW-130 0.3125" GP-117 GP-103 WW-130 0.375" GP-117 GP-117 WW-130 0.500" GP-103 GP-103 *WW-1128 0.5625" GP-103 GP-103 *WW-1318 *Non-Stock-Item NOTE: See Glass Chart Jamb See Glass Chart 90° Outside Corner 1.AW-162 Pressure Plate with GP-107 Isolator (Typical) 2. GP-110 Setting Block (Typical) (GP-126 at 1/2" and 9/16")) 3. Glass Pocket with adapter = 3/4" (1" Glass Pocket at 1/2" and 9/16") 4. Adapters set in sealant (By Others) RELIANCE FRP - GLAZING ADAPTORS - H3146 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com H3146-Spandrel-Options- 1 1/16" GP-103 BOTH SIDES (TYP.) 15/16" GP-118 GP-103 1 1/16" 1 1/8" GP-117 1" Glass Chart 7/8" See Glass Chart -March 2014 Glass Gasket Gasket Size Exterior Interior 0.875" GP-118 GP-118 0.9375" GP-118 GP-103 90° Outside Corner 7/8" GP-118 BOTH SIDES (TYP.) GP-103 15/16" GP-117 BOTH SIDES (TYP.) 1" 1 1/8" 1.000" GP-103 GP-103 1.062" GP-117 GP-103 1.125" GP-117 GP-117 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com RELIANCE FRP GLASS OPTIONS - H3148 1. AW-162 Pressure Plate with GP-107 Isolator (Typical) 2. GP-109 Setting Block (Typical) 3. Glass Pocket = 1 1/2" (Typical) H3148-Vision-Options- ANCHORS FOR RELIANCE 10" SYSTEMS "T" ANCHOR CHART PART NO. WW-105-01 WW-105-02 WW-105-06 TOP VIEW JAMB -March 2014 "F" ANCHOR (SEE CHART) MULLION WW-800 - WW-804 - WW-850 WW-810 WW-1175 MULLION "T" ANCHOR (SEE CHART) "F" ANCHOR CHART PART NO. MULLION WW-106-01 WW-800 - WW-804 - WW-850 WW-106-02 WW-810 TYPICAL SHEAR BLOCK HEAD HEAD FRONT VIEW SILL SILL NOTE: 1. ANCHOR BOLT SIZE / QUANITY AND LOCATION DETERMINED BY STRUCTURAL ENGINEER Reliance Curtain Wall F & T Mull Anchors - H3625 SHIM UNDERNEATH MULLION (BY OTHERS) SEE NOTE 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com H3625-F-T-Anchors-(10in)- -March 2014 WW-810 MULLION WW-800 / WW-804 A B REINFORCING FOR RELIANCE 10" SYSTEMS C C STEEL REINFORCING CHART A WW-209 ALUM. RENIFORCING B WW-201 ALUM. RENIFORCING C RS-20-5-1/2" x 1/2" x 10' LG. STEEL BAR See approved shop dwg's for specific requirements. Ref. installation manual for additional info. Reliance - Steel Reinforcing H3630 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com H3630-Steel-Reinf-(10in)- -March 2014 WW-800 WW-810 WW-1175 SPLICE CENTERLINE CW-671 SPLICE WW-1179 SPLICE WW-1176 SPLICE NOTE: OMIT UPPER FASTENERS AT EXPANSION SPLICE SEALANT (BY OTHERS) LINE AT GLAZING ADAPTER MULL SPLICE FOR RELIANCE 10" SYSTEMS Reliance Curtainwall - Splice Details - H3643 MULLION REFERENCE INSTALLATION MANUAL FOR ADDITIONAL SPLICE INFO. 1-866-OLDCASTLE (653-2278) www.oldcastlebe.com WW-800 WW-810 WW-1175 SPLICE CW-671 WW1179-01 WW-1176-01 H3643-Mullion-Splice-(10in)-
© Copyright 2025 ExpyDoc
