G G
Sweeps
Sweeps
A
A
G
.com
Distributors
800.463.8748
Box 1090
17 Elm Ave.
Roblin, MB
R0L 1P0
U S distribution by
GROUND UP
14951 7th St. NE
Portland, ND
58274
701.866.1561
All contents of this publication c 2014 Gaber Distributors - duplication or redistribution of
this publication, in whole or in part, prohibited without prior written consent from Gaber Distributors
TABLE OF CONTENTS...
Quick
Change
Sweeps
Quick
Change
Sweeps
Heavy Duty
Quick
Change
Sweeps
Narrow
Profile
Heavy Duty
Wide
Profile
Wide
Profile
A3
A4
A5
A6
A7
Quick
Change
Sweeps
Quick
Change
Sweeps
EZ-1
EZ-1
A8
A9
Quick
Change
Sweeps
NT-1 1/4”
Field
Cultivator
Quick
Change
Sweeps
NT-1 1/4”
Field
Cultivator
Quick
Change
Sweeps
NT-1 5/16”
Field
Cultivator
Quick
Change
Sweeps
NT-1 5/16”
Field
Cultivator
Quick
Change
Sweeps
NT-1 1/4”
Chisel
Plow
Quick
Change
Sweeps
NT-1 1/4”
Chisel
Plow
Quick
Change
Sweeps
NT-1 5/16”
Chisel
Plow
Quick
Change
Sweeps
NT-1 5/16”
Chisel
Plow
Bolt-On
Sweeps
Field
Cultivator
Bolt-On
Sweeps
Field
Cultivator
1/4” & 5/16”
1/4” & 5/16”
A17
A18
A19
Bolt-On
Sweeps
Chisel Plow
Bolt-On
Sweeps
Chisel Plow
Bolt-On
Sweeps
Chisel Plow
Bolt-On
Sweeps
Chisel Plow
Reversible
Spikes
Reversible
Spikes
1/4” & 5/16”
1/4” & 5/16”
1/4” & 5/16”
1/4” & 5/16”
1/4”, 5/16”
3/8”, 1/2” &
5/8” Material
1/4”, 5/16”
3/8”, 1/2” &
5/8” Material
A20
A21
A22
A23
A24
A25
Specialty
Sweeps
Specialty
Sweeps
Specialty
Sweeps
Specialty
Sweeps
Specialty
Sweeps
Specialty
Sweeps
Bedding
Bedding
Danish
Danish
Fallow
Master
Furrowers
A26
A27
A28
A29
A30
A31
Specialty
Sweeps
Specialty
Sweeps
Specialty
Sweeps
Specialty
Sweeps
Specialty
Sweeps
Field
Cultivator
Peanut
Peanut
Row Crop
Row Crop
Tender
Plant Hoe
Application
Chart
A32
A33
A34
A35
A36
A37
Field
Cultivator
Chisel
Plow
Chisel
Plow
Chisel
Plow
Application
Chart
Application
Chart
Application
Chart
Application
Chart
A38
A39
A40
A41
Quick
Change
Sweeps
Quick
Change
Sweeps
Narrow
Profile
Narrow
Profile
A2
Quick
Change
Sweeps
Narrow
Profile
G
A14
43 Degree
A15
43 Degree
A10
A16
50 Degree
A11
50 Degree
A12
A13
***Please note that the alphanumeric symbols (A2, A3, etc.)
at the bottom of each icon correspond to the page numbers
in the current Gaber Distributors
Tillage Tools Product Guide.
NOTES...
G
1.800.463.8748
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
All Gaber fast-attach, narrow profile sweeps will interchange
with McKay and Bourgault 100/200 series brackets.
All Gaber fast-attach, narrow profile sweeps will interchange
with McKay and Bourgault 100/200 series brackets.
Narrow Profile
Narrow Profile
GFT-NP11
GFT-NP11
GFT-NP47
GFT-NP7
GFT-NP50
A2
A2
GFT-NP50S
GFT-NP47
GFT-NP50S
GFT-NP50
GFT-NP3
1/4”
Material
GFT-NP7
GFT-NP2
For all 47 and 50
applications
GFT-NP3
1/4”
Material
GFT-NP2
For all 47 and 50
applications
www.
Gaber.com
www.
Gaber.com
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
Narrow Profile
Narrow Profile
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GFT-NP2
2” x 1/4” Seeding Tool
1.72
GFT-NP2
2” x 1/4” Seeding Tool
1.72
GFT-NP3
3” x 1/4” Seeding Tool
2.20
GFT-NP3
3” x 1/4” Seeding Tool
2.20
GFT-NP4
4” x 1/4” Sweep, Stay Wide
2.29
GFT-NP4
4” x 1/4” Sweep, Stay Wide
2.29
GFT-NP6
6” x 1/4” Sweep, Stay Wide
2.64
GFT-NP6
6” x 1/4” Sweep, Stay Wide
2.64
GFT-NP7
7” x 1/4” Sweep, Stay Wide
2.93
GFT-NP7
7” x 1/4” Sweep, Stay Wide
2.93
GFT-NP8
8” x 1/4” Sweep, Stay Wide
3.17
GFT-NP8
8” x 1/4” Sweep, Stay Wide
3.17
GFT-NP9
9” x 1/4” Sweep, Stay Wide
3.35
GFT-NP9
9” x 1/4” Sweep, Stay Wide
3.35
GFT-NP10
10” x 1/4” Sweep, Stay Wide
3.53
GFT-NP10
10” x 1/4” Sweep, Stay Wide
3.53
GFT-NP11
11” x 1/4” Sweep, Stay Wide
4.30
GFT-NP11
11” x 1/4” Sweep, Stay Wide
4.30
GFT-NP12
12” x 1/4” Sweep, Stay Wide
4.85
GFT-NP12
12” x 1/4” Sweep, Stay Wide
4.85
GFT-NP14
14” x 1/4” Sweep, Stay Wide
5.29
GFT-NP14
14” x 1/4” Sweep, Stay Wide
5.29
GFT-NP16
16” x 1/4” Sweep, Stay Wide
5.88
GFT-NP16
16” x 1/4” Sweep, Stay Wide
5.88
Gaber Fast-Attach Brackets - Require 1/2” Plow Bolts
A3
Description
Gaber Fast-Attach Brackets - Require 1/2” Plow Bolts
GFT-NP47
47 Bracket, 4” Length
0.92
GFT-NP47
47 Bracket, 4” Length
0.92
GFT-NP50S
50 Bracket, 4 5/16” Length
1.04
GFT-NP50S
50 Bracket, 4 5/16” Length
1.04
GFT-NP50
50 Bracket, 5” Length
1.32
GFT-NP50
50 Bracket, 5” Length
1.32
1.800.463.8748
1.800.463.8748
A3
G G
Part Number
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
All Gaber fast-attach, narrow profile sweeps will interchange
with McKay and Bourgault 100/200 series brackets.
All Gaber fast-attach, narrow profile sweeps will interchange
with McKay and Bourgault 100/200 series brackets.
Narrow Profile HD
Narrow Profile HD
GFT-NP14HD
GFT-NP14HD
GFT-NP47
GFT-NP9HD
GFT-NP50
A4
A4
GFT-NP50S
GFT-NP47
GFT-NP50S
GFT-NP50
GFT-NP4HD
5/16”
Material
GFT-NP9HD
GFT-NP2HD
For all 47 and 50
applications
GFT-NP4HD
5/16”
Material
GFT-NP2HD
For all 47 and 50
applications
www.
Gaber.com
www.
Gaber.com
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
Narrow Profile HD
Narrow Profile HD
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GFT-NP2HD
2” x 5/16” Seeding Tool
2.12
GFT-NP2HD
2” x 5/16” Seeding Tool
2.12
GFT-NP3HD
3” x 5/16” Seeding Tool
2.71
GFT-NP3HD
3” x 5/16” Seeding Tool
2.71
GFT-NP4HD
4” x 5/16” Sweep, Stay Wide
2.96
GFT-NP4HD
4” x 5/16” Sweep, Stay Wide
2.96
GFT-NP6HD
6” x 5/16” Sweep, Stay Wide
3.26
GFT-NP6HD
6” x 5/16” Sweep, Stay Wide
3.26
GFT-NP7HD
7” x 5/16” Sweep, Stay Wide
3.61
GFT-NP7HD
7” x 5/16” Sweep, Stay Wide
3.61
GFT-NP8HD
8” x 5/16” Sweep, Stay Wide
3.92
GFT-NP8HD
8” x 5/16” Sweep, Stay Wide
3.92
GFT-NP9HD
9” x 5/16” Sweep, Stay Wide
4.14
GFT-NP9HD
9” x 5/16” Sweep, Stay Wide
4.14
GFT-NP10HD
10” x 5/16” Sweep, Stay Wide
4.36
GFT-NP10HD
10” x 5/16” Sweep, Stay Wide
4.36
GFT-NP11HD
11” x 5/16” Sweep, Stay Wide
5.33
GFT-NP11HD
11” x 5/16” Sweep, Stay Wide
5.33
GFT-NP12HD
12” x 5/16” Sweep, Stay Wide
5.99
GFT-NP12HD
12” x 5/16” Sweep, Stay Wide
5.99
GFT-NP14HD
14” x 5/16” Sweep, Stay Wide
6.57
GFT-NP14HD
14” x 5/16” Sweep, Stay Wide
6.57
GFT-NP16HD
16” x 5/16” Sweep, Stay Wide
7.27
GFT-NP16HD
16” x 5/16” Sweep, Stay Wide
7.27
Gaber Fast-Attach Brackets - Require 1/2” Plow Bolts
A5
Description
Gaber Fast-Attach Brackets - Require 1/2” Plow Bolts
GFT-NP47
47 Bracket, 4” Length
0.92
GFT-NP47
47 Bracket, 4” Length
0.92
GFT-NP50S
50 Bracket, 4 5/16” Length
1.04
GFT-NP50S
50 Bracket, 4 5/16” Length
1.04
GFT-NP50
50 Bracket, 5” Length
1.32
GFT-NP50
50 Bracket, 5” Length
1.32
1.800.463.8748
1.800.463.8748
A5
G G
Part Number
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
All Gaber fast-attach, wide profile sweeps will interchange with
Bourgault 410 series brackets.
All Gaber fast-attach, wide profile sweeps will interchange with
Bourgault 410 series brackets.
Wide Profile
Wide Profile
GFTWPHD16
1/4” & 5/16”
Material
www.
A6
A6
GFTWPHD12
GFTWPHD16
GFTWPHD12
GFTWP8
GFTWP8
GFTWP4
GFTWP4
Gaber.com
1/4” & 5/16”
Material
www.
Gaber.com
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
Part Number
Description
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GFTWP4
4” x 1/4” Stay Wide
3.50
GFTWP4
4” x 1/4” Stay Wide
3.50
GFTWP6
6” x 1/4” Stay Wide
4.45
GFTWP6
6” x 1/4” Stay Wide
4.45
GFTWP8
8” x 1/4” Stay Wide
5.25
GFTWP8
8” x 1/4” Stay Wide
5.25
GFTWP10
10” x 1/4” Stay Wide
5.88
GFTWP10
10” x 1/4” Stay Wide
5.88
GFTWP12
12” x 1/4” Stay Wide
6.70
GFTWP12
12” x 1/4” Stay Wide
6.70
GFTWP14
14” x 1/4” Stay Wide
7.38
GFTWP14
14” x 1/4” Stay Wide
7.38
GFTWP16
16” x 1/4” Stay Wide
8.09
GFTWP16
16” x 1/4” Stay Wide
8.09
GFTWP18
18” x 1/4” Stay Wide
8.82
GFTWP18
18” x 1/4” Stay Wide
8.82
Wide Profile
Wide Profile
GFTWP Heavy Duty Series Made of 5/16” Material
GFTWPHD4
4” x 5/16” Stay Wide
4.28
GFTWPHD4
4” x 5/16” Stay Wide
4.28
GFTWPHD6
6” x 5/16” Stay Wide
5.38
GFTWPHD6
6” x 5/16” Stay Wide
5.38
GFTWPHD8
8” x 5/16” Stay Wide
6.30
GFTWPHD8
8” x 5/16” Stay Wide
6.30
GFTWPHD10
10” x 5/16” Stay Wide
7.05
GFTWPHD10
10” x 5/16” Stay Wide
7.05
GFTWPHD12
12” x 5/16” Stay Wide
8.07
GFTWPHD12
12” x 5/16” Stay Wide
8.07
GFTWPHD14
14” x 5/16” Stay Wide
8.90
GFTWPHD14
14” x 5/16” Stay Wide
8.90
GFTWPHD16
16” x 5/16” Stay Wide
9.65
GFTWPHD16
16” x 5/16” Stay Wide
9.65
GFTWPHD18
18” x 5/16” Stay Wide
10.54
GFTWPHD18
18” x 5/16” Stay Wide
10.54
1.800.463.8748
1.800.463.8748
A7
A7
G G
GFTWP Heavy Duty Series Made of 5/16” Material
QUICK CHANGE SWEEPS
EZ-1 Old Style
All Gaber fast-attach EZ-1 field sweeps will interchange with
McKay old style brackets.
QUICK CHANGE SWEEPS
EZ-1 Old Style
All Gaber fast-attach EZ-1 field sweeps will interchange with
McKay old style brackets.
GFT-OS11
GFT-OS7
GFT-OS7
A8
A8
GFT-OS11
GFT-OS4
1/4”
Material
GFT-OS2
For all 41 and 47
Stem Angles
GFT-OS4
1/4”
Material
GFT-OS2
For all 41 and 47
Stem Angles
www.
Gaber.com
www.
Gaber.com
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
Part Number
Part Number
EZ-1 Old Style
EZ-1 Old Style
Description
Weight (lbs.)
Description
Weight (lbs.)
G G
47 Stem Angle
47 Stem Angle
1.79
2.12
GFT-OS2
GFT-OS4
2” x 1/4” Spike
4” x 1/4” Sweep, Stay Wide
1.79
2.12
GFT-OS6
GFT-OS7
GFT-OS8
GFT-OS9
GFT-OS10
GFT-OS11
GFT-OS12
6” x 1/4” Sweep, Stay Wide
7” x 1/4” Sweep, Stay Wide
8” x 1/4” Sweep, Stay Wide
9” x 1/4” Sweep, Stay Wide
10” x 1/4” Sweep, Stay Wide
11” x 1/4” Sweep, Stay Wide
12” x 1/4” Sweep, Stay Wide
2.34
2.60
2.82
2.98
3.09
3.31
3.68
GFT-OS6
GFT-OS7
GFT-OS8
GFT-OS9
GFT-OS10
GFT-OS11
GFT-OS12
6” x 1/4” Sweep, Stay Wide
7” x 1/4” Sweep, Stay Wide
8” x 1/4” Sweep, Stay Wide
9” x 1/4” Sweep, Stay Wide
10” x 1/4” Sweep, Stay Wide
11” x 1/4” Sweep, Stay Wide
12” x 1/4” Sweep, Stay Wide
2.34
2.60
2.82
2.98
3.09
3.31
3.68
41 Stem Angle - non-stocked item, special order only
GFT-OS2-41
GFT-OS4-41
GFT-OS6-41
GFT-OS7-41
GFT-OS8-41
GFT-OS9-41
GFT-OS10-41
GFT-OS11-41
GFT-OS12-41
2” x 1/4” Spike
4” x 1/4” Sweep, Stay Wide
6” x 1/4” Sweep, Stay Wide
7” x 1/4” Sweep, Stay Wide
8” x 1/4” Sweep, Stay Wide
9” x 1/4” Sweep, Stay Wide
10” x 1/4” Sweep, Stay Wide
11” x 1/4” Sweep, Stay Wide
12” x 1/4” Sweep, Stay Wide
GFT-OSEZ-7
GFT-OSEZ-2
1 5/8” - 1 3/4” Centres, 7/16” Bolts
1 3/4” Centres, 1/2” Bolts
1.800.463.8748
GFT-OS2-41
GFT-OS4-41
GFT-OS6-41
GFT-OS7-41
GFT-OS8-41
GFT-OS9-41
GFT-OS10-41
GFT-OS11-41
GFT-OS12-41
1.79
1.95
2.25
2.46
2.65
2.81
2.93
3.23
3.48
GFT-OSEZ-7
Gaber Fast-Attach EZ-1 Brackets
0.66
0.66
41 Stem Angle - non-stocked item, special order only
2” x 1/4” Spike
4” x 1/4” Sweep, Stay Wide
6” x 1/4” Sweep, Stay Wide
7” x 1/4” Sweep, Stay Wide
8” x 1/4” Sweep, Stay Wide
9” x 1/4” Sweep, Stay Wide
10” x 1/4” Sweep, Stay Wide
11” x 1/4” Sweep, Stay Wide
12” x 1/4” Sweep, Stay Wide
1.79
1.95
2.25
2.46
2.65
2.81
2.93
3.23
3.48
GFT-OSEZ-7
Gaber Fast-Attach EZ-1 Brackets
GFT-OSEZ-7
GFT-OSEZ-2
1 5/8” - 1 3/4” Centres, 7/16” Bolts
1 3/4” Centres, 1/2” Bolts
1.800.463.8748
A9
2” x 1/4” Spike
4” x 1/4” Sweep, Stay Wide
A9
GFT-OS2
GFT-OS4
0.66
0.66
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
All Gaber fast-attach NT-1 field sweeps will interchange with
Nichols brackets. Sweeps are available in both field cultivator
and deep tiller styles. Gaber MegaWing series designed for
enhanced weed control.
All Gaber fast-attach NT-1 field sweeps will interchange with
Nichols brackets. Sweeps are available in both field cultivator
and deep tiller styles. Gaber MegaWing series designed for
enhanced weed control.
NT-1 Field Cultivator
NT-1 Field Cultivator
GFT11BK
GFT11BK
MWQC9B
A
10
GFT4BK
1/4”
Material
GFT2C*
MWQC9B
A
10
GFT4BK
1/4”
Material
Stay Wide
Configuration
Stay Wide
Configuration
*GFT2C made from
3/8” material
*GFT2C made from
3/8” material
www.
Gaber.com
GFT2C*
www.
Gaber.com
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
Part Number
Description
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GFT2C
2” x 3/8” Spike, Diamond End
2.48
GFT2C
2” x 3/8” Spike, Diamond End
2.48
GFT4BK
4” x 1/4” Sweep, Stay Wide
2.32
GFT4BK
4” x 1/4” Sweep, Stay Wide
2.32
GFT6BK
6” x 1/4” Sweep, Stay Wide
2.86
GFT6BK
6” x 1/4” Sweep, Stay Wide
2.86
GFT7BK
7” x 1/4” Sweep, Stay Wide
3.08
GFT7BK
7” x 1/4” Sweep, Stay Wide
3.08
GFT8BK
8” x 1/4” Sweep, Stay Wide
3.28
GFT8BK
8” x 1/4” Sweep, Stay Wide
3.28
GFT9BK
9” x 1/4” Sweep, Stay Wide
3.50
GFT9BK
9” x 1/4” Sweep, Stay Wide
3.50
GFT10BK
10” x 1/4” Sweep, Stay Wide
3.69
GFT10BK
10” x 1/4” Sweep, Stay Wide
3.69
GFT11BK
11” x 1/4” Sweep, Stay Wide
3.72
GFT11BK
11” x 1/4” Sweep, Stay Wide
3.72
GFT12BK
12” x 1/4” Sweep, Stay Wide
3.90
GFT12BK
12” x 1/4” Sweep, Stay Wide
3.90
NT-1 Field Cultivator
NT-1 Field Cultivator
G G
A
11
Gaber MegaWing Series
3.35
MWQC7B
7” x 1/4” MegaWing, Stay Wide
3.35
MWQC8B
8” x 1/4” MegaWing, Stay Wide
3.55
MWQC8B
8” x 1/4” MegaWing, Stay Wide
3.55
MWQC9B
9” x 1/4” MegaWing, Stay Wide
3.75
MWQC9B
9” x 1/4” MegaWing, Stay Wide
3.75
MWQC10B
10” x 1/4” MegaWing, Stay Wide
3.95
MWQC10B
10” x 1/4” MegaWing, Stay Wide
3.95
G
ILITY•
AB
l
Tilla Gaber
ge
Mad Tools
e of
BORON
ST
EE
L
1.800.463.8748
ED DU
NC
R
A Al
G
l
Tilla Gaber
ge
Mad Tools
e of
ILITY•
AB
ED DU
NC
R
A Al
•ENH
7” x 1/4” MegaWing, Stay Wide
•ENH
MWQC7B
A
11
Gaber MegaWing Series
BORON
ST
EE
L
1.800.463.8748
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
NT-1 Field Cultivator HD
NT-1 Field Cultivator HD
All Gaber fast-attach NT-1 field sweeps will interchange with
Nichols brackets. Sweeps available in both field cultivator
and deep tiller styles.
A
12
GFT12FK
GFT12FK
GFT10FK
GFT10FK
GFT6FK
5/16”
Material
All Gaber fast-attach NT-1 field sweeps will interchange with
Nichols brackets. Sweeps available in both field cultivator
and deep tiller styles.
GFT4FK
Stay Wide
Configuration
A
12
GFT6FK
5/16”
Material
GFT4FK
Stay Wide
Configuration
www.
Gaber.com
www.
Gaber.com
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
NT-1 Field Cultivator HD
NT-1 Field Cultivator HD
G G
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GFT2C
2” x 3/8” Spike, Diamond End
2.48
GFT2C
2” x 3/8” Spike, Diamond End
2.48
GFT4FK
4” x 5/16” Sweep, Stay Wide
2.76
GFT4FK
4” x 5/16” Sweep, Stay Wide
2.76
GFT6FK
6” x 5/16” Sweep, Stay Wide
3.31
GFT6FK
6” x 5/16” Sweep, Stay Wide
3.31
GFT7FK
7” x 5/16” Sweep, Stay Wide
3.63
GFT7FK
7” x 5/16” Sweep, Stay Wide
3.63
GFT8FK
8” x 5/16” Sweep, Stay Wide
4.11
GFT8FK
8” x 5/16” Sweep, Stay Wide
4.11
GFT9FK
9” x 5/16” Sweep, Stay Wide
4.37
GFT9FK
9” x 5/16” Sweep, Stay Wide
4.37
GFT10FK
10” x 5/16” Sweep, Stay Wide
4.61
GFT10FK
10” x 5/16” Sweep, Stay Wide
4.61
GFT11FK
11” x 5/16” Sweep, Stay Wide
4.70
GFT11FK
11” x 5/16” Sweep, Stay Wide
4.70
GFT12FK
12” x 5/16” Sweep, Stay Wide
5.18
GFT12FK
12” x 5/16” Sweep, Stay Wide
5.18
A
13
G
ILITY•
AB
l
Tilla Gaber
ge
Mad Tools
e of
BORON
ST
EE
L
1.800.463.8748
ED DU
NC
R
A Al
G
l
Tilla Gaber
ge
Mad Tools
e of
ILITY•
AB
ED DU
NC
R
A Al
•ENH
Description
•ENH
Part Number
BORON
ST
EE
L
1.800.463.8748
A
13
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
All Gaber fast-attach NT-1 chisel plow sweeps will interchange
with Nichols brackets. Sweeps are available in both 1/4” and
5/16” material.
All Gaber fast-attach NT-1 chisel plow sweeps will interchange
with Nichols brackets. Sweeps are available in both 1/4” and
5/16” material.
NT-1 Chisel Plow
NT-1 Chisel Plow
GFTCP14
GFTCP14
GFTCP10
A
14
GFTCP6
1/4”
Material
GFT2C*
GFTCP10
A
14
GFTCP6
1/4”
Material
Stay Wide
Configuration
Stay Wide
Configuration
*GFT2C made from
3/8” material
*GFT2C made from
3/8” material
www.
Gaber.com
GFT2C*
www.
Gaber.com
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
NT-1 Chisel Plow
NT-1 Chisel Plow
G G
Part Number
Description
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GFT2C
2” x 3/8” Spike, Diamond End
2.48
GFT2C
2” x 3/8” Spike, Diamond End
2.48
GFTCP4
4” x 1/4” Sweep, Stay Wide
2.78
GFTCP4
4” x 1/4” Sweep, Stay Wide
2.78
GFTCP6
6” x 1/4” Sweep, Stay Wide
3.31
GFTCP6
6” x 1/4” Sweep, Stay Wide
3.31
GFTCP7
7” x 1/4” Sweep, Stay Wide
3.57
GFTCP7
7” x 1/4” Sweep, Stay Wide
3.57
GFTCP8
8” x 1/4” Sweep, Stay Wide
3.92
GFTCP8
8” x 1/4” Sweep, Stay Wide
3.92
GFTCP9
9” x 1/4” Sweep, Stay Wide
4.12
GFTCP9
9” x 1/4” Sweep, Stay Wide
4.12
GFTCP10
10” x 1/4” Sweep, Stay Wide
4.34
GFTCP10
10” x 1/4” Sweep, Stay Wide
4.34
GFTCP11
11” x 1/4” Sweep, Stay Wide
4.65
GFTCP11
11” x 1/4” Sweep, Stay Wide
4.65
GFTCP12
12” x 1/4” Sweep, Stay Wide
4.96
GFTCP12
12” x 1/4” Sweep, Stay Wide
4.96
GFTCP14
14” x 1/4” Sweep, Stay Wide
5.46
GFTCP14
14” x 1/4” Sweep, Stay Wide
5.46
GFTCP16
16” x 1/4” Sweep, Stay Wide
6.13
GFTCP16
16” x 1/4” Sweep, Stay Wide
6.13
GFTCP18
18” x 1/4” Sweep, Stay Wide
6.61
GFTCP18
18” x 1/4” Sweep, Stay Wide
6.61
1.800.463.8748
A
15
1.800.463.8748
A
15
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
All Gaber fast-attach NT-1 chisel plow sweeps will interchange
with Nichols brackets. Sweeps available in both 1/4” and
5/16” material.
All Gaber fast-attach NT-1 chisel plow sweeps will interchange
with Nichols brackets. Sweeps available in both 1/4” and
5/16” material.
NT-1 Chisel Plow HD
A
16
GFTCP16HD
GFTCP16HD
GFTCP12HD
GFTCP12HD
GFTCP8HD
5/16”
Material
NT-1 Chisel Plow HD
GFTCP4HD
Stay Wide
Configuration
A
16
GFTCP8HD
5/16”
Material
GFTCP4HD
Stay Wide
Configuration
www.
Gaber.com
www.
Gaber.com
QUICK CHANGE SWEEPS
QUICK CHANGE SWEEPS
NT-1 Chisel Plow HD
NT-1 Chisel Plow HD
G G
Part Number
Description
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GFT2C
2” x 3/8” Spike, Diamond End
2.48
GFT2C
2” x 3/8” Spike, Diamond End
2.48
GFTCP4HD
4” x 5/16” Sweep, Stay Wide
3.31
GFTCP4HD
4” x 5/16” Sweep, Stay Wide
3.31
GFTCP6HD
6” x 5/16” Sweep, Stay Wide
3.96
GFTCP6HD
6” x 5/16” Sweep, Stay Wide
3.96
GFTCP7HD
7” x 5/16” Sweep, Stay Wide
4.41
GFTCP7HD
7” x 5/16” Sweep, Stay Wide
4.41
GFTCP8HD
8” x 5/16” Sweep, Stay Wide
4.72
GFTCP8HD
8” x 5/16” Sweep, Stay Wide
4.72
GFTCP9HD
9” x 5/16” Sweep, Stay Wide
5.09
GFTCP9HD
9” x 5/16” Sweep, Stay Wide
5.09
GFTCP10HD
10” x 5/16” Sweep, Stay Wide
5.33
GFTCP10HD
10” x 5/16” Sweep, Stay Wide
5.33
GFTCP11HD
11” x 5/16” Sweep, Stay Wide
5.84
GFTCP11HD
11” x 5/16” Sweep, Stay Wide
5.84
GFTCP12HD
12” x 5/16” Sweep, Stay Wide
5.95
GFTCP12HD
12” x 5/16” Sweep, Stay Wide
5.95
GFTCP14HD
14” x 5/16” Sweep, Stay Wide
6.61
GFTCP14HD
14” x 5/16” Sweep, Stay Wide
6.61
GFTCP16HD
16” x 5/16” Sweep, Stay Wide
7.82
GFTCP16HD
16” x 5/16” Sweep, Stay Wide
7.82
GFTCP18HD
18” x 5/16” Sweep, Stay Wide
8.22
GFTCP18HD
18” x 5/16” Sweep, Stay Wide
8.22
1.800.463.8748
A
17
1.800.463.8748
A
17
BOLT-ON SWEEPS
BOLT-ON SWEEPS
Field Cultivator 47
Field Cultivator 47
Gaber G47 field cultivator sweeps come with a 47 stem angle
and holes that are 7/16” in diameter** and spaced 1 3/4” apart.
Gaber MegaWing series designed for enhanced weed control.
A
18
G47-12SW
G47-12SW
G47-10SW
G47-10SW
MW7B7
1/4” & 5/16”
Material*
Gaber G47 field cultivator sweeps come with a 47 stem angle
and holes that are 7/16” in diameter** and spaced 1 3/4” apart.
Gaber MegaWing series designed for enhanced weed control.
G47-4SW
A
18
1/4” & 5/16”
Material*
Stay Wide
Configuration
Stay Wide
Configuration
*Bolt-on spikes available in
1/4”, 5/16”, 3/8”, 1/2” & 5/8” material
Refer to pages A24 & A25
*Bolt-on spikes available in
1/4”, 5/16”, 3/8”, 1/2” & 5/8” material
Refer to pages A24 & A25
**1/2” hole diameters also
available upon request
www.
Gaber.com
MW7B7
**1/2” hole diameters also
available upon request
G47-4SW
www.
Gaber.com
BOLT-ON SWEEPS
BOLT-ON SWEEPS
Field Cultivator 47
Field Cultivator 47
Part Number
Description
Part Number
Weight (lbs.)
Description
Weight (lbs.)
47 Stem Angle
47 Stem Angle
G47-4SW
4” x 1/4” Stay Wide
2.11
G47-4SW
4” x 1/4” Stay Wide
2.11
G47-6SW
6” x 1/4” Stay Wide
2.34
G47-6SW
6” x 1/4” Stay Wide
2.34
G47-7SW
7” x 1/4” Stay Wide
2.60
G47-7SW
7” x 1/4” Stay Wide
2.60
G47-8SW
8” x 1/4” Stay Wide
2.82
G47-8SW
8” x 1/4” Stay Wide
2.82
G47-9SW
9” x 1/4” Stay Wide
2.98
G47-9SW
9” x 1/4” Stay Wide
2.98
G47-10SW
10” x 1/4” Stay Wide
3.08
G47-10SW
10” x 1/4” Stay Wide
3.08
G47-11SW
11” x 1/4” Stay Wide
3.30
G47-11SW
11” x 1/4” Stay Wide
3.30
G47-11SW2
11” x 1/4” **1/2” Bolt Hole
3.30
G47-11SW2
11” x 1/4” **1/2” Bolt Hole
3.30
G47-12SW
12” x 1/4” Stay Wide
3.53
G47-12SW
12” x 1/4” Stay Wide
3.53
G G
G47 Heavy Duty Series Made of 5/16” Material
A
19
G47 Heavy Duty Series Made of 5/16” Material
G47-4SWHD
4” x 5/16” Stay Wide
2.64
G47-6SWHD
6” x 5/16” Stay Wide
2.93
G47-7SWHD
7” x 5/16” Stay Wide
3.31
3.52
G47-8SWHD
8” x 5/16” Stay Wide
3.52
9” x 5/16” Stay Wide
3.75
G47-9SWHD
9” x 5/16” Stay Wide
3.75
G47-10SWHD
10” x 5/16” Stay Wide
3.88
G47-10SWHD
10” x 5/16” Stay Wide
3.88
G47-11SWHD
11” x 5/16” Stay Wide
4.50
G47-11SWHD
11” x 5/16” Stay Wide
4.50
G47-12SWHD
12” x 5/16” Stay Wide
4.63
G47-12SWHD
12” x 5/16” Stay Wide
4.63
G47-4SWHD
4” x 5/16” Stay Wide
2.64
G47-6SWHD
6” x 5/16” Stay Wide
2.93
G47-7SWHD
7” x 5/16” Stay Wide
3.31
G47-8SWHD
8” x 5/16” Stay Wide
G47-9SWHD
Gaber MegaWing Series Made of 1/4” Material
Gaber MegaWing Series Made of 1/4” Material
MW7B7
7” x 1/4” MegaWing, Stay Wide
3.35
MW7B7
7” x 1/4” MegaWing, Stay Wide
3.35
MW9B7
9” x 1/4” MegaWing, Stay Wide
3.75
MW9B7
9” x 1/4” MegaWing, Stay Wide
3.75
MW12B7
12” x 1/4” MegaWing, Stay Wide
5.02
MW12B7
12” x 1/4” MegaWing, Stay Wide
5.02
1.800.463.8748
1.800.463.8748
A
19
BOLT-ON SWEEPS
BOLT-ON SWEEPS
Chisel Plow 43
Chisel Plow 43
Gaber G43 chisel plow sweeps feature a 43 stem angle
and holes that are 1/2” in diameter and slotted to fit 2 1/4”
to 2 1/2” hole spacings.
A
20
G43-16SW
G43-16SW
G43-12SW
G43-12SW
G43-08SW
G43-06SW
1/4” & 5/16”
Material
Gaber G43 chisel plow sweeps feature a 43 stem angle
and holes that are 1/2” in diameter and slotted to fit 2 1/4”
to 2 1/2” hole spacings.
Stay Wide
Configuration
A
20
G43-08SW
G43-06SW
1/4” & 5/16”
Material
Stay Wide
Configuration
www.
Gaber.com
www.
Gaber.com
BOLT-ON SWEEPS
BOLT-ON SWEEPS
Chisel Plow 43
Chisel Plow 43
G G
Part Number
Description
Part Number
Weight (lbs.)
Description
Weight (lbs.)
43 Stem Angle
43 Stem Angle
G43-06SW
6” x 1/4” Stay Wide
3.58
G43-06SW
6” x 1/4” Stay Wide
3.58
G43-08SW
8” x 1/4” Stay Wide
4.32
G43-08SW
8” x 1/4” Stay Wide
4.32
G43-10SW
10” x 1/4” Stay Wide
4.94
G43-10SW
10” x 1/4” Stay Wide
4.94
G43-12SW
12” x 1/4” Stay Wide
5.47
G43-12SW
12” x 1/4” Stay Wide
5.47
G43-14SW
14” x 1/4” Stay Wide
6.17
G43-14SW
14” x 1/4” Stay Wide
6.17
G43-16SW
16” x 1/4” Stay Wide
6.48
G43-16SW
16” x 1/4” Stay Wide
6.48
G43-18SW
18” x 1/4” Stay Wide
7.28
G43-18SW
18” x 1/4” Stay Wide
7.28
G43 Heavy Duty Series Made of 5/16” Material
A
21
G43 Heavy Duty Series Made of 5/16” Material
G43-06SWHD
6” x 5/16” Stay Wide
4.38
G43-06SWHD
6” x 5/16” Stay Wide
4.38
G43-08SWHD
8” x 5/16” Stay Wide
5.33
G43-08SWHD
8” x 5/16” Stay Wide
5.33
G43-10SWHD
10” x 5/16” Stay Wide
6.11
G43-10SWHD
10” x 5/16” Stay Wide
6.11
G43-12SWHD
12” x 5/16” Stay Wide
6.83
G43-12SWHD
12” x 5/16” Stay Wide
6.83
G43-14SWHD
14” x 5/16” Stay Wide
7.45
G43-14SWHD
14” x 5/16” Stay Wide
7.45
G43-16SWHD
16” x 5/16” Stay Wide
7.93
G43-16SWHD
16” x 5/16” Stay Wide
7.93
G43-18SWHD
18” x 5/16” Stay Wide
8.71
G43-18SWHD
18” x 5/16” Stay Wide
8.71
1.800.463.8748
1.800.463.8748
A
21
BOLT-ON SWEEPS
BOLT-ON SWEEPS
Chisel Plow 50
Chisel Plow 50
Gaber G50 chisel plow sweeps feature a 50 stem angle
and holes that are 1/2” in diameter and spaced 2 1/4” apart.
A
22
G50-18SW
G50-18SW
G50-14SW
G50-14SW
G50-10SW
1/4” & 5/16”
Material
G50-06SW
Stay Wide
Configuration
Gaber G50 chisel plow sweeps feature a 50 stem angle
and holes that are 1/2” in diameter and spaced 2 1/4” apart.
A
22
G50-10SW
1/4” & 5/16”
Material
G50-06SW
Stay Wide
Configuration
www.
Gaber.com
www.
Gaber.com
BOLT-ON SWEEPS
BOLT-ON SWEEPS
Chisel Plow 50
Chisel Plow 50
G G
Part Number
Description
Part Number
Weight (lbs.)
Description
Weight (lbs.)
50 Stem Angle
50 Stem Angle
G50-06SW
6” x 1/4” Stay Wide
3.58
G50-06SW
6” x 1/4” Stay Wide
3.58
G50-08SW
8” x 1/4” Stay Wide
4.32
G50-08SW
8” x 1/4” Stay Wide
4.32
G50-10SW
10” x 1/4” Stay Wide
4.94
G50-10SW
10” x 1/4” Stay Wide
4.94
G50-12SW
12” x 1/4” Stay Wide
5.47
G50-12SW
12” x 1/4” Stay Wide
5.47
G50-14SW
14” x 1/4” Stay Wide
6.17
G50-14SW
14” x 1/4” Stay Wide
6.17
G50-16SW
16” x 1/4” Stay Wide
6.48
G50-16SW
16” x 1/4” Stay Wide
6.48
G50-18SW
18” x 1/4” Stay Wide
7.28
G50-18SW
18” x 1/4” Stay Wide
7.28
G50 Heavy Duty Series Made of 5/16” Material
A
23
G50 Heavy Duty Series Made of 5/16” Material
G50-06SWHD
6” x 5/16” Stay Wide
4.38
G50-06SWHD
6” x 5/16” Stay Wide
4.38
G50-08SWHD
8” x 5/16” Stay Wide
5.33
G50-08SWHD
8” x 5/16” Stay Wide
5.33
G50-10SWHD
10” x 5/16” Stay Wide
6.11
G50-10SWHD
10” x 5/16” Stay Wide
6.11
G50-12SWHD
12” x 5/16” Stay Wide
6.83
G50-12SWHD
12” x 5/16” Stay Wide
6.83
G50-14SWHD
14” x 5/16” Stay Wide
7.45
G50-14SWHD
14” x 5/16” Stay Wide
7.45
G50-16SWHD
16” x 5/16” Stay Wide
7.93
G50-16SWHD
16” x 5/16” Stay Wide
7.93
G50-18SWHD
18” x 5/16” Stay Wide
8.71
G50-18SWHD
18” x 5/16” Stay Wide
8.71
1.800.463.8748
1.800.463.8748
A
23
REVERSIBLE SPIKES
Field Cultivator & Chisel Plow
REVERSIBLE SPIKES
Field Cultivator & Chisel Plow
GRC-4516HD
GRC-5816SW
GRC-4516HD
GRC-5816SW
GRC-5816
GTC-383R
GRC-5816
GTC-383R
A
24
A
24
GHS-16*
GHS-16*
GFC-13414
*Gaber Heel Sweeps to
be used with GRC-5816
www.
Gaber.com
GFC-13414
*Gaber Heel Sweeps to
be used with GRC-5816
www.
Gaber.com
REVERSIBLE SPIKES
Field Cultivator & Chisel Plow
REVERSIBLE SPIKES
Field Cultivator & Chisel Plow
Straight Spikes, Furrowers & Twists
Straight Spikes, Furrowers & Twists
G G
Part Number
Description
Part Number
Weight (lbs.)
Description
Weight (lbs.)
Gaber Field Cultivator Bolt-On Spikes
Gaber Field Cultivator Bolt-On Spikes
GFC-13414
1/4” x 1 3/4” x 11”, 7/16” Bolts, 1 5/8” - 1 3/4” Slot
1.10
GFC-13414
1/4” x 1 3/4” x 11”, 7/16” Bolts, 1 5/8” - 1 3/4” Slot
1.10
GFC-134516
5/16” x 1 3/4” x 10 1/2“, 7/16” Bolts, 1 5/8” - 2” Slot
1.26
GFC-134516
5/16” x 1 3/4” x 10 1/2“, 7/16” Bolts, 1 5/8” - 2” Slot
1.26
GFC-212516
5/16” x 2 1/2” x 10 1/2“, 7/16” Bolts, 1 5/8” - 2” Slot
1.70
GFC-212516
5/16” x 2 1/2” x 10 1/2“, 7/16” Bolts, 1 5/8” - 2” Slot
1.70
GFC-258
5/8” x 2” x 16”, 1/2” Bolts, 1 3/4” Centre - Flat
4.67
GFC-258
5/8” x 2” x 16”, 1/2” Bolts, 1 3/4” Centre - Flat
4.67
Gaber Chisel Plow Bolt-On Spikes
A
25
Gaber Chisel Plow Bolt-On Spikes
GRC-4516L
1/4” x 4 1/2” x 16” Furrower, Slotted 2 1/4” - 2 1/2” Spacing
4.52
GRC-4516-516
5/16” x 4 1/2” x 16” Furrower, Slotted 2 1/4” - 2 1/2” Spacing
5.40
GRC-4516HD
3/8” x 4 1/2” x 16” Furrower, Slotted 2 1/4” - 2 1/2” Spacing
6.69
GRC-5816
5/8” x 2” x 16” Diamond Point, Slotted 2 1/4” - 2 1/2” Spacing
5.07
5.06
GRC-5816SW
5/8” x 2” x 16” Swedged Point, Slotted 2 1/4” - 2 1/2” Spacing
5.06
Twisted Chisel 3/8” x 3” x 20”, Left, Slotted 2 1/4” - 2 1/2”
4.50
GTC-383L
Twisted Chisel 3/8” x 3” x 20”, Left, Slotted 2 1/4” - 2 1/2”
4.50
GTC-383R
Twisted Chisel 3/8” x 3” x 20”, Right, Slotted 2 1/4” - 2 1/2”
4.50
GTC-383R
Twisted Chisel 3/8” x 3” x 20”, Right, Slotted 2 1/4” - 2 1/2”
4.50
GTC-123L
Twisted Chisel 1/2” x 3” x 20”, Left, Slotted 2 1/4” - 2 1/2”
8.77
GTC-123L
Twisted Chisel 1/2” x 3” x 20”, Left, Slotted 2 1/4” - 2 1/2”
8.77
GTC-123R
Twisted Chisel 1/2” x 3” x 20”, Right, Slotted 2 1/4” - 2 1/2”
8.77
GTC-123R
Twisted Chisel 1/2” x 3” x 20”, Right, Slotted 2 1/4” - 2 1/2”
8.77
GRC-4516L
1/4” x 4 1/2” x 16” Furrower, Slotted 2 1/4” - 2 1/2” Spacing
4.52
GRC-4516-516
5/16” x 4 1/2” x 16” Furrower, Slotted 2 1/4” - 2 1/2” Spacing
5.40
GRC-4516HD
3/8” x 4 1/2” x 16” Furrower, Slotted 2 1/4” - 2 1/2” Spacing
6.69
GRC-5816
5/8” x 2” x 16” Diamond Point, Slotted 2 1/4” - 2 1/2” Spacing
5.07
GRC-5816SW
5/8” x 2” x 16” Swedged Point, Slotted 2 1/4” - 2 1/2” Spacing
GTC-383L
Gaber Heel Sweeps - use with GRC-5816
Gaber Heel Sweeps - use with GRC-5816
GHS-16
Heel Sweep 16” x 1/4”
6.44
GHS-16
Heel Sweep 16” x 1/4”
6.44
GHS-18
Heel Sweep 18” x 1/4”
6.62
GHS-18
Heel Sweep 18” x 1/4”
6.62
1.800.463.8748
1.800.463.8748
A
25
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Bedding
Bedding
Gaber GBS series bedding sweeps feature a 54 stem angle
for 1 3/4” shank widths. Stems have two holes on 2 1/4”
centres for 7/16” plow bolts, and one centre hole for a
5/8” carriage bolt.
Gaber GBS series bedding sweeps feature a 54 stem angle
for 1 3/4” shank widths. Stems have two holes on 2 1/4”
centres for 7/16” plow bolts, and one centre hole for a
5/8” carriage bolt.
GBS-1654
A
26
GBS-1054
GBS-1654
A
26
1/4”
Material
1/4”
Material
Regular Wing
Configuration
Regular Wing
Configuration
www.
Gaber.com
GBS-1054
www.
Gaber.com
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Bedding
Bedding
G G
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GBS-654
6” x 1/4” Material
1.94
GBS-654
6” x 1/4” Material
1.94
GBS-854
8” x 1/4” Material
2.42
GBS-854
8” x 1/4” Material
2.42
GBS-1054
10” x 1/4” Material
2.72
GBS-1054
10” x 1/4” Material
2.72
GBS-1254
12” x 1/4” Material
3.66
GBS-1254
12” x 1/4” Material
3.66
GBS-1454
14” x 1/4” Material
4.68
GBS-1454
14” x 1/4” Material
4.68
GBS-1654
16” x 1/4” Material
5.14
GBS-1654
16” x 1/4” Material
5.14
GBS-1854
18” x 1/4” Material
5.69
GBS-1854
18” x 1/4” Material
5.69
GBS-2054
20” x 1/4” Material
8.04
GBS-2054
20” x 1/4” Material
8.04
GBS-2254
22” x 1/4” Material
8.95
GBS-2254
22” x 1/4” Material
8.95
GBS-2454
24” x 1/4” Material
9.71
GBS-2454
24” x 1/4” Material
9.71
A
27
G
ILITY•
AB
l
Tilla Gaber
ge
Mad Tools
e of
BORON
ST
EE
L
1.800.463.8748
ED DU
NC
R
A Al
G
l
Tilla Gaber
ge
Mad Tools
e of
ILITY•
AB
ED DU
NC
R
A Al
•ENH
Description
•ENH
Part Number
BORON
ST
EE
L
1.800.463.8748
A
27
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Danish
Danish
All Gaber S-tine sweeps fit a 3/8” plow bolt. Also available for
special order: a single 7/16” hole, or two 7/16” holes on
1 9/16” centres.
A
28
K10
K10
K7
K7
K2
K1
3/16” & 1/4”
Material
www.
Gaber.com
All Gaber S-tine sweeps fit a 3/8” plow bolt. Also available for
special order: a single 7/16” hole, or two 7/16” holes on
1 9/16” centres.
A
28
K2
K1
3/16” & 1/4”
Material
www.
Gaber.com
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Danish
Danish
Part Number
Description
Weight (lbs.)
Part Number
Description
Weight (lbs.)
K1
8” x 1 3/8” x 1/4” Spike
0.80
K1
8” x 1 3/8” x 1/4” Spike
0.80
K2
2 3/4” x 3/16”
0.66
K2
2 3/4” x 3/16”
0.66
K4
4” x 3/16”
0.79
K4
4” x 3/16”
0.79
K7
7” x 3/16”
1.22
K7
7” x 3/16”
1.22
K10
10” x 3/16”
1.95
K10
10” x 3/16”
1.95
G G
2 3/4” x 1/4” Spike
0.85
K44
4” x 1/4”
1.00
K47
7” x 1/4”
1.56
K49
9” x 1/4”
1.78
G
l
Tilla Gaber
ge
Mad Tools
e of
BORON
ST
EE
L
1.800.463.8748
K42
2 3/4” x 1/4” Spike
0.85
K44
4” x 1/4”
1.00
K47
7” x 1/4”
1.56
K49
9” x 1/4”
1.78
ED DU
NC
R
A Al
G
l
Tilla Gaber
ge
Mad Tools
e of
ILITY•
AB
ED DU
NC
R
A Al
ILITY•
AB
•ENH
K42
Heavy Duty Series - 1/4” Material
•ENH
A
29
Heavy Duty Series - 1/4” Material
BORON
ST
EE
L
1.800.463.8748
A
29
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Fallow Master
Fallow Master
Gaber GFM series sweeps feature a 50 stem angle for 2” shank
widths. Stems have two holes on 2 1/4” centres for 1/2” plow
bolts. Sweeps available by special order.
Gaber GFM series sweeps feature a 50 stem angle for 2” shank
widths. Stems have two holes on 2 1/4” centres for 1/2” plow
bolts. Sweeps available by special order.
GFM-2650
A
30
Part Number
Description
Weight (lbs.)
GFM-2650
26” x 5/16” Material
GFM-2750
GFM-2650
A
30
Part Number
Description
Weight (lbs.)
13.92
GFM-2650
26” x 5/16” Material
13.92
27” x 5/16” Material
14.45
GFM-2750
27” x 5/16” Material
14.45
GFM-2650HD
26” x 3/8” Material
14.84
GFM-2650HD
26” x 3/8” Material
14.84
GFM-2750HD
27” x 3/8” Material
15.41
GFM-2750HD
27” x 3/8” Material
15.41
5/16” & 3/8”
Material
5/16” & 3/8”
Material
Regular Wing Configuration
Regular Wing Configuration
www.
Gaber.com
www.
Gaber.com
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Furrowers
Furrowers
GFW-11
GFW-11
G G
GTB-15
GTB-15
A
31
Part Number
Description
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GFN-11
Furrower 11” Narrow, slotted hole
6.90
GFN-11
Furrower 11” Narrow, slotted hole
6.90
GFW-11
Furrower 11” Wide, slotted hole
6.95
GFW-11
Furrower 11” Wide, slotted hole
6.95
GTB-12
Texas Buster Furrower 12”, single hole
9.43
GTB-12
Texas Buster Furrower 12”, single hole
9.43
GTB-14
Texas Buster Furrower 14”, single hole
11.37
GTB-14
Texas Buster Furrower 14”, single hole
11.37
GTB-15
Texas Buster Furrower 15”, single hole
15.69
GTB-15
Texas Buster Furrower 15”, single hole
15.69
1.800.463.8748
1.800.463.8748
A
31
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Peanut
Peanut
Gaber GPS series sweeps feature a 54 stem angle for 1 3/4”
shank widths. Stems have slotted holes on 1 1/4” to 2 1/4”
centres for 7/16” plow bolts.
Gaber GPS series sweeps feature a 54 stem angle for 1 3/4”
shank widths. Stems have slotted holes on 1 1/4” to 2 1/4”
centres for 7/16” plow bolts.
GPS-1854
A
32
GPS-454
GPS-1854
A
32
3/16” & 1/4”
Material
3/16” & 1/4”
Material
Regular Wing Configuration
Regular Wing Configuration
www.
Gaber.com
GPS-454
www.
Gaber.com
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Peanut
Peanut
G G
Weight (lbs.)
Part Number
Description
Weight (lbs.)
GPS-454
4” x 3/16”
1.01
GPS-454
4” x 3/16”
1.01
GPS-654
6” x 3/16”
1.21
GPS-654
6” x 3/16”
1.21
GPS-854
8” x 3/16”
1.39
GPS-854
8” x 3/16”
1.39
GPS-1054
10” x 3/16”
1.99
GPS-1054
10” x 3/16”
1.99
GPS-1254
12” x 3/16”
2.31
GPS-1254
12” x 3/16”
2.31
GPS-1454
14” x 1/4”
3.03
GPS-1454
14” x 1/4”
3.03
GPS-1654
16” x 1/4”
3.49
GPS-1654
16” x 1/4”
3.49
GPS-1854
18” x 1/4”
3.75
GPS-1854
18” x 1/4”
3.75
A
33
G
ILITY•
AB
l
Tilla Gaber
ge
Mad Tools
e of
BORON
ST
EE
L
1.800.463.8748
ED DU
NC
R
A Al
G
l
Tilla Gaber
ge
Mad Tools
e of
ILITY•
AB
ED DU
NC
R
A Al
•ENH
Description
•ENH
Part Number
BORON
ST
EE
L
1.800.463.8748
A
33
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Row Crop
Row Crop
Gaber RC series sweeps feature a 54 stem angle for 1 3/4” to
2” shank widths. Stems have two holes on 2” centres for 7/16”
plow bolts, and one centre hole for a 5/8” carriage bolt.
Gaber RC series sweeps feature a 54 stem angle for 1 3/4” to
2” shank widths. Stems have two holes on 2” centres for 7/16”
plow bolts, and one centre hole for a 5/8” carriage bolt.
RC-2454RG
A
34
RC-0654SW
RC-2454RG
A
34
RC-0654SW
1/4”
Material
1/4”
Material
Stay Wide & Regular Wing
Configurations
Stay Wide & Regular Wing
Configurations
www.
Gaber.com
www.
Gaber.com
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Row Crop
Row Crop
G G
Part Number
Description
Weight (lbs.)
Part Number
Description
Weight (lbs.)
RC-0454SW
4” x 1/4” Material, Stay Wide
1.76
RC-0454SW
4” x 1/4” Material, Stay Wide
1.76
RC-0654SW
6” x 1/4” Material, Stay Wide
2.20
RC-0654SW
6” x 1/4” Material, Stay Wide
2.20
RC-0854SW
8” x 1/4” Material, Stay Wide
2.92
RC-0854SW
8” x 1/4” Material, Stay Wide
2.92
RC-1054SW
10” x 1/4” Material, Stay Wide
3.09
RC-1054SW
10” x 1/4” Material, Stay Wide
3.09
RC-1254RG
12” x 1/4” Material, Regular
3.15
RC-1254RG
12” x 1/4” Material, Regular
3.15
RC-1454RG
14” x 1/4” Material, Regular
3.89
RC-1454RG
14” x 1/4” Material, Regular
3.89
RC-1654RG
16” x 1/4” Material, Regular
4.37
RC-1654RG
16” x 1/4” Material, Regular
4.37
RC-1854RG
18” x 1/4” Material, Regular
4.86
RC-1854RG
18” x 1/4” Material, Regular
4.86
RC-2054RG
20” x 1/4” Material, Regular
5.35
RC-2054RG
20” x 1/4” Material, Regular
5.35
RC-2254RG
22” x 1/4” Material, Regular
5.84
RC-2254RG
22” x 1/4” Material, Regular
5.84
RC-2454RG
24” x 1/4” Material, Regular
6.33
RC-2454RG
24” x 1/4” Material, Regular
6.33
RC-2654RG
26” x 1/4” Material, Regular
6.82
RC-2654RG
26” x 1/4” Material, Regular
6.82
RC-2854RG
28” x 1/4” Material, Regular
7.31
RC-2854RG
28” x 1/4” Material, Regular
7.31
RC-3054RG
30” x 1/4” Material, Regular
7.80
RC-3054RG
30” x 1/4” Material, Regular
7.80
1.800.463.8748
A
35
1.800.463.8748
A
35
SPECIALTY SWEEPS
SPECIALTY SWEEPS
Tender Plant Hoe
Tender Plant Hoe
Gaber tender plant hoes are slotted for 3/8” plow bolts on
1” to 2” hole centres.
A
36
Part Number
3/16” & 1/4”
Material
GTP-7L
GTP-7L
GTP-7R
GTP-7R
Description
A
36
Weight
(lbs.)
Part Number
GTP-7L
7” x 3/16”, Left Hand
2.75
GTP-7R
7” x 3/16”, Right Hand
2.75
GTP-7LHD
7” x 1/4”, Left Hand
3.22
GTP-7RHD
7” x 1/4”, Right Hand
3.22
GTP-7L
7” x 3/16”, Left Hand
2.75
GTP-7R
7” x 3/16”, Right Hand
2.75
GTP-7LHD
7” x 1/4”, Left Hand
3.22
GTP-7RHD
7” x 1/4”, Right Hand
3.22
www.
Gaber tender plant hoes are slotted for 3/8” plow bolts on
1” to 2” hole centres.
Gaber.com
3/16” & 1/4”
Material
www.
Description
Gaber.com
Weight
(lbs.)
APPLICATION CHART
APPLICATION CHART
Field Cultivator
Machine
Stem Angle
41
ALLIS CHALMERS
ALLIS CHALMERS
ALLIS CHALMERS (early models)
ANDERSON
BAKER
BOURGAULT 6200, 6800, 8800, 8810, 5710 Air Drill
BRADY (before 70-71)
BRADY (after 70-71)
BRADY 3400
BRADY
BRILLION (prior 1986)
BRILLION (after 1986)
BUFFALO (no till)
BUSH HOG
BUSH HOG
CALKINS
CASE FC, FCW, FCM
CASE Minn-Toba
CASE IH 45, 4300, 4500, 4600, 4700, 4800, 4900
CCIL CI-200, 179, 279, 379
COCKSHUTT (early models)
COCKSHUTT 237, 239, 337
COCKSHUTT 285, 485
CRUSTBUSTER
DAKON
DEGELMAN 3000 series
DMI TigerMate
EZEE-ON
FARMERS FACTORY
FLEXI-COIL 820, ST820, 5000, 7500 (350 lb.)
FLEXI-COIL 200, 400, 420, 800
FORD 208
FORREST CITY Do-All
FRIGGSTAD
GLENCOE Double Shank 1250
GLENCOE PFC, MBC, PCMW
GLENCOE FC, MFC, FCSW
HESSTON
HINIKER
IHC 45, 46, 47
INGHAM
JEOFFROY 450
JOHN DEERE OLD
JOHN DEERE 1000, 1010, 1050, CCA, C10, C20
43
47
52
Hole Centers
Bolt Centers
1 5/8” 1 3/4”
3/8” 7/16”
2”
Field Cultivator
Machine
Stem Angle
41
1/2”
54
ALLIS CHALMERS
ALLIS CHALMERS
ALLIS CHALMERS (early models)
ANDERSON
BAKER
BOURGAULT 6200, 6800, 8800, 8810, 5710 Air Drill
BRADY (before 70-71)
BRADY (after 70-71)
BRADY 3400
BRADY
BRILLION (prior 1986)
BRILLION (after 1986)
BUFFALO (no till)
BUSH HOG
BUSH HOG
CALKINS
CASE FC, FCW, FCM
CASE Minn-Toba
CASE IH 45, 4300, 4500, 4600, 4700, 4800, 4900
CCIL CI-200, 179, 279, 379
COCKSHUTT (early models)
COCKSHUTT 237, 239, 337
COCKSHUTT 285, 485
CRUSTBUSTER
DAKON
DEGELMAN 3000 series
DMI TigerMate
EZEE-ON
FARMERS FACTORY
FLEXI-COIL 820, ST820, 5000, 7500 (350 lb.)
FLEXI-COIL 200, 400, 420, 800
FORD 208
FORREST CITY Do-All
FRIGGSTAD
GLENCOE Double Shank 1250
GLENCOE PFC, MBC, PCMW
GLENCOE FC, MFC, FCSW
HESSTON
HINIKER
IHC 45, 46, 47
INGHAM
JEOFFROY 450
JOHN DEERE OLD
JOHN DEERE 1000, 1010, 1050, CCA, C10, C20
43
47
52
Hole Centers
Bolt Centers
1 5/8” 1 3/4”
3/8” 7/16”
2”
54
G G
54
A
37
54
1/2”
54
54
JOHN DEERE 730, 940, 960, 1060
JOHN DEERE 730, 940, 960, 1060
This chart is designed to be used only as a guideline. Although every precaution has been taken to ensure its accuracy, it may
contain certain errors or omissions.
This chart is designed to be used only as a guideline. Although every precaution has been taken to ensure its accuracy, it may
contain certain errors or omissions.
1.800.463.8748
1.800.463.8748
A
37
APPLICATION CHART
APPLICATION CHART
Field Cultivator
Stem Angle
41
43
47
52
Hole Centers
Bolt Centers
1 5/8” 1 3/4”
3/8” 7/16”
2”
DURAB
I
G
NHANC
•E
TY•
LI
ber s
a
G
All e Tool
g
Tilla ade of
M
TEEL
S
N
O
R
O
B
www.
This field cultivator application chart is
designed to be used only as a guideline.
Although every precaution has been taken
to ensure its accuracy, it may contain
certain errors or omissions.
Gaber.com
41
43
47
52
Hole Centers
Bolt Centers
1 5/8” 1 3/4”
3/8” 7/16”
2”
1/2”
KENT
KEWANEE
KRAUSE 600, 900, 5000, 6300, 6500, 7000
KRAUSE K-Tine
LANDOLL
LEON VibraFlex
M & W 724
MASSEY FERGUSON 160
MASSEY HARRIS
MINN-TOBA LDC, 726, 729
MINNEAPOLIS-MOLINE FT200
MORRIS L240, L320, L249
MORRIS 9000, 9001, Challenger 2, Maxim 1 & 2
MORRIS Concept 2000 (4000 lb. trip)
MULTIPLEX 245, 345
NOBLE
OLIVER
OLIVER 285, 385, 485
OLIVER 235, 245, 345
RHINO (Athens)
SUNFLOWER
TAYLOR
VALMAR
VERSATILE 100
VIBRASHANK
WHITE
WHITE
WHITE 245, 345
WIL-RICH
WINPOWER 1500
A
38
ED
DURAB
I
G
ber s
a
G
All e Tool
g
Tilla ade of
M
TY•
LI
ED
Stem Angle
1/2”
KENT
KEWANEE
KRAUSE 600, 900, 5000, 6300, 6500, 7000
KRAUSE K-Tine
LANDOLL
LEON VibraFlex
M & W 724
MASSEY FERGUSON 160
MASSEY HARRIS
MINN-TOBA LDC, 726, 729
MINNEAPOLIS-MOLINE FT200
MORRIS L240, L320, L249
MORRIS 9000, 9001, Challenger 2, Maxim 1 & 2
MORRIS Concept 2000 (4000 lb. trip)
MULTIPLEX 245, 345
NOBLE
OLIVER
OLIVER 285, 385, 485
OLIVER 235, 245, 345
RHINO (Athens)
SUNFLOWER
TAYLOR
VALMAR
VERSATILE 100
VIBRASHANK
WHITE
WHITE
WHITE 245, 345
WIL-RICH
WINPOWER 1500
A
38
Machine
NHANC
•E
Machine
Field Cultivator
TEEL
S
N
O
R
O
B
www.
This field cultivator application chart is
designed to be used only as a guideline.
Although every precaution has been taken
to ensure its accuracy, it may contain
certain errors or omissions.
Gaber.com
APPLICATION CHART
APPLICATION CHART
Chisel Plow
Machine
Stem Angle
43
47
50
Hole Centers
54
2 1/4”
2 1/2”
ALLIS CHALMERS 22” & 32”, 1400 Chiselvator
ALLIS CHALMERS (other)
ANDERSON
BOURGAULT 9200, 9400, 9800
BRADY
BRANDT
BUSH HOG
CALKINS 32” shank
CASE older models
CASE
CASE 10, 50, 55, 645, 4700, 4900, 5000
CASE WWC-37, 324
CASE T25118W, T265663
CASE CP700, 900, 110
CASE IH Vibra Chisel
CASE IH 5800, 5850, 5900, PTX300, PTX600
CCIL 203, 204, 205 1 1/4” shank
CCIL high clearance 1” shank
CCIL 806, 807, 808
CCIL Thick Shank - 806 (1 1/4” thickness)
COCKSHUTT 240, 246, 247, 249, 476
CROWN
DEGELMAN 500
DEGELMAN 3000-2
DEMSTER
DMI
EDWARDS
EZEE-ON
FARMHAND / GLENCOE
FORD 131
FORD 131
FORD
FORDSON MAJOR 513-1, 713-20
FLEXI-COIL 300, 340, 600, 800CP
FLEXI-COIL 1” x 2” shank
FLEXI-COIL 1 3/4” x 7/8” shank
FRIGGSTAD older models
FRIGGSTAD
GLENCOE
GLENCOE
GLENCOE high clearance
GLENCOE Giant 6
GRAHAM Planet
GRAHAM
Chisel Plow
Machine
Hole Size
7/16”
Stem Angle
43
1/2”
47
50
Hole Centers
54
2 1/4”
2 1/2”
ALLIS CHALMERS 22” & 32”, 1400 Chiselvator
ALLIS CHALMERS (other)
ANDERSON
BOURGAULT 9200, 9400, 9800
BRADY
BRANDT
BUSH HOG
CALKINS 32” shank
CASE older models
CASE
CASE 10, 50, 55, 645, 4700, 4900, 5000
CASE WWC-37, 324
CASE T25118W, T265663
CASE CP700, 900, 110
CASE IH Vibra Chisel
CASE IH 5800, 5850, 5900, PTX300, PTX600
CCIL 203, 204, 205 1 1/4” shank
CCIL high clearance 1” shank
CCIL 806, 807, 808
CCIL Thick Shank - 806 (1 1/4” thickness)
COCKSHUTT 240, 246, 247, 249, 476
CROWN
DEGELMAN 500
DEGELMAN 3000-2
DEMSTER
DMI
EDWARDS
EZEE-ON
FARMHAND / GLENCOE
FORD 131
FORD 131
FORD
FORDSON MAJOR 513-1, 713-20
FLEXI-COIL 300, 340, 600, 800CP
FLEXI-COIL 1” x 2” shank
FLEXI-COIL 1 3/4” x 7/8” shank
FRIGGSTAD older models
FRIGGSTAD
GLENCOE
GLENCOE
GLENCOE high clearance
GLENCOE Giant 6
GRAHAM Planet
GRAHAM
Hole Size
7/16”
1/2”
G G
GRAHAM 400, 500, 1600, 2600
GYSLER
HESSTON
HESSTON
A
39
GRAHAM 400, 500, 1600, 2600
GYSLER
HESSTON
HESSTON
1.800.463.8748
1.800.463.8748
A
39
APPLICATION CHART
APPLICATION CHART
Chisel Plow
Machine
Stem Angle
43
A
40
47
50
Hole Centers
54
2 1/4”
HINIKER
INGHAM
IHC 10, 50, 55, 75, 509, 645
JEOFFROY 16”
JEOFFROY 22”, 32”
JOHN DEERE 100, 150, 200, 250
JOHN DEERE 1600
JOHN DEERE 610, 1650, 1810
JOHN DEERE 610 seeding tool
KENT
KEWANEE
KILBERRY
KRAUSE low clearance
KRAUSE high clearance
KRAUSE
LANDOLL
LELY
LEON
MAJOR 513-1, 730-20
MF
MF 124, 125, 126, 128 trip
MF Spring Cushion
MF Trash King
MASSEY HARRIS
MEL-CAM
MEL-CAM Culti-Weeder
MELROE (Clark)
MELROE (Clark)
MINN-TOBA 3 PH
MINN-TOBA 120, 176
MM T600, T1500, T1800
MM T500
MOHAWK Trash King
MOHAWK
MORRIS 220, 4, 5, 6, 7 Series
MORRIS 1982 Magnum 1
MORRIS Worn Trips
MORRIS Concept 2000 (755 lb. trip)
MORRIS Magnum II, 8900, 912, Case 8100
NOBLE XR20
NOBLE 8000
OLIVER 247, 248, 347
OLIVER 500 (Jeoffroy)
RENN
RITEWAY
ROBIN
ROBIN
ROBIN-NODWELL
www.
2 1/2”
Chisel Plow
Machine
Hole Size
7/16”
43
1/2”
A
40
Gaber.com
Stem Angle
47
50
Hole Centers
54
2 1/4”
HINIKER
INGHAM
IHC 10, 50, 55, 75, 509, 645
JEOFFROY 16”
JEOFFROY 22”, 32”
JOHN DEERE 100, 150, 200, 250
JOHN DEERE 1600
JOHN DEERE 610, 1650, 1810
JOHN DEERE 610 seeding tool
KENT
KEWANEE
KILBERRY
KRAUSE low clearance
KRAUSE high clearance
KRAUSE
LANDOLL
LELY
LEON
MAJOR 513-1, 730-20
MF
MF 124, 125, 126, 128 trip
MF Spring Cushion
MF Trash King
MASSEY HARRIS
MEL-CAM
MEL-CAM Culti-Weeder
MELROE (Clark)
MELROE (Clark)
MINN-TOBA 3 PH
MINN-TOBA 120, 176
MM T600, T1500, T1800
MM T500
MOHAWK Trash King
MOHAWK
MORRIS 220, 4, 5, 6, 7 Series
MORRIS 1982 Magnum 1
MORRIS Worn Trips
MORRIS Concept 2000 (755 lb. trip)
MORRIS Magnum II, 8900, 912, Case 8100
NOBLE XR20
NOBLE 8000
OLIVER 247, 248, 347
OLIVER 500 (Jeoffroy)
RENN
RITEWAY
ROBIN
ROBIN
ROBIN-NODWELL
www.
Gaber.com
2 1/2”
Hole Size
7/16”
1/2”
APPLICATION CHART
APPLICATION CHART
Chisel Plow
Machine
Stem Angle
43
47
50
Hole Centers
54
2 1/4”
2 1/2”
Chisel Plow
Machine
Hole Size
7/16”
Stem Angle
43
1/2”
ROLL-O-FLEX
ROGIN
ROLL-O-TRIP
ROLL-A-CONE
SATURN
SCHULTE
SUNFLOWER
VERSATILE
VICON
VICTORY
WHITE 247, 249, 476
WHITE 420, 435
WILCAR
WIL-RICH early models
WIL-RICH
47
50
Hole Centers
54
2 1/4”
2 1/2”
Hole Size
7/16”
1/2”
ROLL-O-FLEX
ROGIN
ROLL-O-TRIP
ROLL-A-CONE
SATURN
SCHULTE
SUNFLOWER
VERSATILE
VICON
VICTORY
WHITE 247, 249, 476
WHITE 420, 435
WILCAR
WIL-RICH early models
WIL-RICH
G G
BORON
ST
EE
L
1.800.463.8748
•ENH
G
l
Tilla Gaber
ge
Mad Tools
e of
A
41
This chisel plow application chart is designed to be used only as a
guideline. Although every precaution has been taken to ensure its
accuracy, it may contain certain errors or omissions.
ED DU
NC
R
A Al
G
l
Tilla Gaber
ge
Mad Tools
e of
ILITY•
AB
ED DU
NC
R
A Al
ILITY•
AB
•ENH
This chisel plow application chart is designed to be used only as a
guideline. Although every precaution has been taken to ensure its
accuracy, it may contain certain errors or omissions.
BORON
ST
EE
L
1.800.463.8748
A
41

Pocahontas Machinery Consignment Auction

CLEARING SALES

Solenoid Switches TESTING Solenoid Switches (Lucas

tankone - Edilportale