Bergische Str. 15 D-42781 Haan / Germany PLAMA Europe's No. 1 the specialist for plastic machinery Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 1 / 15 SINGLE SCREW EXTRUDERS * SINGLE SCREW KNEADER Pos. manufacturer type screw Ø mm L/D capacity kg/h max. e154808 Nissei lab-/satellite extruder ASB 650 1 x 26 24 15-18 e27026 Weber single screw extruder ES 30 1 x 30 25 30-40 e27069 Betol single screw extruder 45 1 x 45 35 e27129 Kaufman single screw extruder E 1-60-33 1 x 60 e271991 Colines single screw extruder 1-90-28 e270741 Thyssen-Henschel single screw extruder e27039 drive year kW appr. Details 90 PE, PP, ABS, PS, hydr. screwdrive, usuable as an injection unit 8 DC 86 PE, PP, PS, ABS, air cooling, up to 200 upm 20-40 15 82 PE, PP, PS, ABS, with strand die 33 50-140 32 85 PE, PP, PS, ABS, venting 1 x 90 28 150-300 79 87 PE, PP, PS, ABS, DC-motor HES-120-30 D 1 x 120 30 200-300 220 84 PE, PP, PS, ABS, with venting port Thermatic single screw extruder E 115/25 1 x 115 26 300-400 93 84 PE, PP, PS, ABS, venting e27202 Breyer single screw extruder 1-90-33 1 x 90 36 200-400 90 85 PE, PP, PS, ABS, with venting, control panel e27433 Kuhne single screw extruder 105 1 x 105 30 300-450 145 98 PE, PP, ABS, DC-Motor, venting, vacuum pump. With refurbishment: incl. Motor- and Heating-Controls. Without refurbishment: Without Heating-Control. e27340 Battenfeld single screw extruder Uni Ex 1-90-30 B 1 x 90 30 300-500 132 81 PE, PP, PS, ABS, DC-drive e27497 Breyer single screw extruder 120-33D 1 x 120 33 400-500 300 1991 PE, PP, PS, ABS e27291 Breyer single screw extruder 1-120-36 1 x 120 36 400-600 200 86 PMMA, PC, ABS, PS, venting e26851 Beloit - Italy single screw extruder 150/26 1 x 152 28 700-900 315 DC 80 PE, PP, ABS, PS, soft-PVC, reconditioned 1996, new screw available e27481 Battenfeld single screw extruder 1-150-30 BCNC 1 x 150 30 600-900 300 PE, PP, PS, ABS, DC-motor screw Antrieb year kW appr. 100 72 PVC 10 89/92 PVC, DC drive, venting, counter rotation 1992 TWIN SCREW EXTRUDERS * PLANETARY EXTRUDERS Pos. manufacturer type Ø mm L/D capacity kg/h max. de27403 Weber twin screw extruder DS 155 2 x 155 17 de272261 Battenfeld twin screw extruder Uni Ex 2-50-16 2 x 52 16 de271721 Ide twin screw extruder DSK 52 2 x 52-104 con. 20-140 15 83 PVC, venting, counter rotation, dosing unit de269301 Cincinnati twin screw extruder CM 55 2 x 55-110 con. 150-250 25,4 91 PVC, venting, vacuum pump, dosing unit, counter rotation de27117 Battenfeld PVC twin screw extruder K286-0-16/D3 2 x 86 29 77 PVC, venting, counter rotation, dosing unit, DC drive 15 10-70 150-250 * depending on the material and kind of production; year ( = year of first production after delivery Details PLAMA Europe's No. 1 the specialist for plastic machinery Bergische Str. 15 D-42781 Haan / Germany Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 2 / 15 TWIN SCREW EXTRUDERS * PLANETARY EXTRUDERS Pos. manufacturer type screw kW appr. de26858 Theysohn/Öswag AT 60 conical twin screw extruder 2 x 60-132 130 200-300 33 82 PVC, venting, counter rotation, vacuum pump, dosing unit de27149 Krauss-Maffei PVC twin screw extruder KMD 60 2 x 60-120 con. 200-300 30 85 PVC, venting, counter rotation de27278 Cincinnati PVC twin screw extruder CMT 58 2 x 58-125 con. 160-350 32,5 DC 88 PVC, DC drive, venting, vacuumpump, counter rotation, dosing unit de26857 Theysohn/Öswag AT 88 conical twin screw extruder 2 x 88-151 con. 300-400 70 82 PVC, venting, counter rotation, vacuum pump, dosing unit de27426 Werner & Pfleiderer twin screw extruder ZSK 83 2 x 83 36 400-700 182 86/12 de27524 Bandera compounding extruder 2C.170.HT/34 D 2 x 170 34 80-1500 720 DC 2001 PE, PP, PS, ABS, DC-Motor, co-rotation, venting. Against surplus price: NEW SIEMENS S7 control with PLAMA "PLEXCON" Software, dosing units, Strand-, or underwater pelletizers. PE, PP, DC-motor, co-rotation, venting, vacuum pump, gear box 12-120 rpm screw L/D capacity kg/h max. Ø mm L/D capacity kg/h max. Antrieb year Details pelletizing and regranulating lines Pos. manufacturer type g27408 Pulverdosierung g27409 Seitendosierung g27425 crammer feeder g27446 Maag melting pump Extrex 56/56 g27307 Geng-Mayer laboratory pelletizing line PM-GM-DS 35/20 2 x 35 20 10-35 20 96 PE, PP, PS, ABS, venting, co-rotation, vacuum pump, melt pressure sensor, dosing unit, strand die, water bath, pelletizer. Against surplus price sidefeeder available. g27444 Comac pelletizing line EBC 40 AV 2 x 40 32 80-150 23 92 PE, PP, PS, ABS, DC-drive, venting, corotation, volum. dosing unit, water bath, strand die, strand pelletizer g268581 Theysohn/Öswag PVc pelletizing line AT 60 2 x 60-132 200-300 33 82 PVC, venting, vacuum pump, counter rotation, dosing unit, hot face cutter g27445 Comac pelletizing line EBC 68 AV 2 x 68 32 200-300 65 92 PE, PP, PS, ABS, flex-wall dosing unit, screen changer, strand die, water bath, strand pelletizer, spiral dryer with outfeed sieve g27338 Automatik pelletizing line ZCM 53 2 x 53 36 200-300 60 85 g27490 Leistritz compounding line ZSE 70 GL 2 x 71 32 150-350 110 90 g27306.1 Battenfeld pelletizing line 1-90-30 V 1 x 90 30 300-400 110 84/86 PE, PP, PS, ABS, venting, co-rotation, incl. strand-die, waterbath, pelletizer, on request: hotface cutter with pellet dryer, against additional price: Brabender gravimetric dosing units available PE, PP, PS, ABS, PC, ABS,PET, PA 6 + 66, GF 30, POM, aircooled DC-Drive, co-rotation, screw-speed max. 300 rpm, venting with vacuumpump, atmospheric venting, sidefeeder (sidefeeder-port with atmosph. Venting), Gericke main dosing unit, Gericke sattelite dosing unit for sidefeeder, Masterbatch dosing unit by Colortronic, mechanical screen-changer, stranddie, watherbath, Scheer strand pelletizer PE, PP, PS, ABS, strand die, water bath, pelletizer g272501 Plama Compounding line ZSP70 2 x 70 32 300-500 145 neu Ø mm drive year kW appr. Details 90mm diameter * depending on the material and kind of production; year ( = year of first production after delivery PE, PP, PS, ABS, 600 RPM, control Siemens S7, hot face cutter, dryer PLAMA Europe's No. 1 the specialist for plastic machinery Bergische Str. 15 D-42781 Haan / Germany Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 3 / 15 pelletizing and regranulating lines Pos. manufacturer type screw drive year Ø mm L/D capacity kg/h max. g27340.1 Battenfeld pelletizing line Uni Ex 1-90-30 B g268571 Theysohn/Öswag PVC pelletizing line AT 88 2 x 88-151 g272491 Plama Compounding line ZSP70 2 x 70 g272511 Plama Compounding line ZSP70 g26366 Sikoplast film recycling and pelletizing line g27525 OMP Recycling line kW appr. 1 x 90 30 300-500 132 81 PE, PP, PS, ABS, DC-drive 400-600 70 82 PVC, conical twin screw extruder, venting, counter rotation, dosing unit, hot face cutter 36 500-800 260 neu PE, PP, PS, ABS, 600 RPM, control Siemens S7, hot face cutter, dryer 2 x 70 40 500-800 260 neu PE, PP, PS, ABS, 600 RPM, control Siemens S7, hot face cutter, dryer HKS 220/150/26 B2 220+150 26 700-900 232+99 92-95 film-recycling line, PE, PP, screen changer, hot face cutter with underwater cooling, dryer, 180E 180 40 800-1200 340 PE, PP, PS, ABS, push feeder 9 KW, single extuder 180mm, 2 venting zones, hydraulic screen changer, waterring pelletizer, dryer. screw Antrieb year 1998 Details COMPOUNDING- * MASTERBATCH LINES Pos. manufacturer type Ø mm L/D capacity kg/h max. kW appr. g27444 Comac pelletizing line EBC 40 AV 2 x 40 32 80-150 23 92 PE, PP, PS, ABS, DC-drive, venting, corotation, volum. dosing unit, water bath, strand die, strand pelletizer g27502 Leistritz compounding line ZSE 50 2 x 50 32 150-250 39 1993 PE, PP, PS, ABS, DC-motor, co-rotation, venting, vacuumpump, strand die, waterbath, strand pelletizer. g27338 Automatik pelletizing line ZCM 53 2 x 53 36 200-300 60 85 g27490 Leistritz compounding line ZSE 70 GL 2 x 71 32 150-350 110 90 g270231 Perkins / Werner & Pfleiderer compounding line 2 x 75 2 x 75 30 300-400 100 85 PE, PP, PS, ABS, venting, co-rotation, incl. strand-die, waterbath, pelletizer, on request: hotface cutter with pellet dryer, against additional price: Brabender gravimetric dosing units available PE, PP, PS, ABS, PC, ABS,PET, PA 6 + 66, GF 30, POM, aircooled DC-Drive, co-rotation, screw-speed max. 300 rpm, venting with vacuumpump, atmospheric venting, sidefeeder (sidefeeder-port with atmosph. Venting), Gericke main dosing unit, Gericke sattelite dosing unit for sidefeeder, Masterbatch dosing unit by Colortronic, mechanical screen-changer, stranddie, watherbath, Scheer strand pelletizer PE, PP, PS, ABS, segmented screws and barrels,corotation, spaghetti head, waterbath, granulator, hotfacecutter with underwaterpelletizing available g27499 Leistritz compounding line ZSE 50 HP 2 x 50 44 200-400 121 98 g27511 Leistritz compounding line ZSE 60 HP 2 x 60 36 300-500 121 03 g26300 Plama compounding line corotation ZSP 70 2 x 70 32 400-600 220 new g27426 Werner & Pfleiderer twin screw extruder ZSK 83 2 x 83 36 400-700 182 86/12 g27513 Krauss-Maffei compounding line KMC 86 MPC 1 x 85 32 300-700 150 00 * depending on the material and kind of production; year ( = year of first production after delivery Details PE, PP, PET, venting, co-rotation, vacuum pump, screwspeed 600 rpm, hardened screw- and cylindersegments, hydr. screenchanger, waterbath, stranddie, strandgranulator Scheer SGS 100. sidefeeder(s). Leistritz Macromatex control. Against surplus price:gravimetric dosingunits and underwater-pelletizer with centrifugal dryer available. PE, PP, PS, ABS, venting, co-rotation, vacuum pump, sidefeeder LSP 56, PA 6.6, AC-motor, max. melding pressure 350 bar, max. melting temp. 350°C, screw drive 400 U/min., 45.000 working hours, Stranddie, Waterbath, Strandpelletizer. PS, PE, PP, PA, up to 600upm, hot face cutter, spaghetti die with water bath and pelletiser available, motor up to 265kW possible, alternative with die fac cutter PE, PP, PS, ABS, DC-Motor, co-rotation, venting.Against Surplus price: new SIEMENS S7 control with PLAMA "PLEXCON" Software, Dosing units, Strand-, or underwater pelletizers. PE, PP, venting, co-rotation, sidefeeder SD 64 PLAMA Europe's No. 1 the specialist for plastic machinery Bergische Str. 15 D-42781 Haan / Germany Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 4 / 15 COMPOUNDING- * MASTERBATCH LINES Pos. manufacturer type g27381 Plama compounding line for fiber reinforced PE/PP ZSP 70 GF g27528 Automatik compounding extruder g275190 de27524 screw Antrieb year Ø mm L/D capacity kg/h max. 2 x 70 40 700-800 260 AC NEW ZCM 106-120 2 x 120 26 600-1200 222 85 Leistritz compounding line ZSE 135 2 x 135 40 1500 600 98 Bandera compounding extruder 2C.170.HT/34 D 2 x 170 34 80-1500 720 DC 2001 kW Details appr. PE, PP, AC-drive, venting, corotation, vacuum pump, 3+1 gravimetric dosing unit, side feeder PSF 46, strand die, water bath, strand pelletizer, tempering unit, water cooling unit, conveyor unit, Siemens S7 control PE, PP, PS ABS, 2 screen changer, strand die, 4m water bath, pelletizer, twin screw, co-rotation, segmented screws + barrel, dosing unit, 3 ventings, vacuumpump, sidefeeder, alternatively hotface cutter with underwatercooling available. PE, PP, PS, ABS, DC-motor, co-rotation, venting 2x, 2 vacuumpumps, material handling through dosing units/conveyor belt, mixing tank/screw conveying, sidefeeder, tempering unit, control panel, meltfilter Britas SK 300 S, UWG Gala with polymer diverter valve, water cycle system, heat exchanger, centrifuge, classifierseeve, cooling tower for for cold water production (500 kW), max. screwspeed: 250 U/min. PE, PP, DC-motor, co-rotation, venting, vacuum pump, gear box 12-120 rpm ACCESSORIES COMPOUNDING * MASTERBATCH * PELLETIZING Pos. manufacturer type screw g26889 hot face cutter g26942 Kreyenburg screen changer 180mm Ø g26941 Kreyenburg screen changer 105mm Ø g269041 Gneuss double cassette screenchanger MS 75 200 g27051 Scheer granulator ASG 300 300-500 15 90 300mm working width g27052 Scheer granulator ASG 300 300-500 15 90 300mm working width g27065 Automatik pelletizer ASG 5/1 50-300 2,5 85 PE, PP, PS, ABS g27126 K-Tron vol. dosing unit S 210 0,55 g27320 Somos dryer D 400 28 77 g27317 Somos dryer D 900 51 94 g27319 Somos dryer D 400 45 93 g27327 OMP hot face cutter TGS 30 R 300-500 2,2 g27328 PHT hot face cutter UV 500 300-500 2,6 + 4,9 g26980.1 Kreyenburg double cassette screen changer K-SWE 180 500-1200 Ø mm L/D capacity kg/h max. drive year kW appr. 300-500 K SWE 180 Details PVC 500-800 83 300-400 90 new heat exchanger, new drying granules, vacuum conveyor system. Completely reconditioned and approved. Piping has to be arranged by the customer himself at his location. PE, PP, PS ABS, without dryer 94 93 * depending on the material and kind of production; year ( = year of first production after delivery PE, PP, PS, ABS, granulation head, dryer Bergische Str. 15 D-42781 Haan / Germany PLAMA Europe's No. 1 the specialist for plastic machinery Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 5 / 15 ACCESSORIES COMPOUNDING * MASTERBATCH * PELLETIZING Pos. manufacturer type screw g27363.0 hot face cutter with screen changer PE, PP, PS, ABS g27424.1 Battenfeld screen changer incl. hydraulic station (1,5kW pump) g27435 P.H.T. Ferrara pelletizing downstream UN 500 300-700 g27452 Kreyenburg melting pump GPE 140 400-2500 g27469 Maag melting pump 70mm Ø g27470 Maag melting pump 70/70 g27498 Gneuss screenchanger SF 60 g27500 Gala hot face cutter 8.1 BF/MOT g27503 K-Tron gravimetric dosing unit Graviblend g27418 Leistritz water ring pelletising system LWRG 3000 g27515 Gala Underwater-granulating system SLC 6 g27518 K-Tron dosing unit, 6 components m27165 Cramer dryer Ø mm L/D capacity kg/h max. drive year kW appr. 4,9 Details 94 06 completely reconditioned and like new. 27,1 with motor and gearbox 2000 500 4x 0,07 with Gala dryer Graviblend, 4-cavity dosing unit, Scale: 3X3K-SFT30, Screws: 3x Ø 35 mm, 1x Ø 50 mm, incl. controls. Like New. Leistritz LWRG 3000 die face cutting system incl. breaker plate, Leistriutz pelletiser, process water circulation system with tank and pump, heat exchanger, Gala 16.2 BF / DWH centrifugal dryer. Less than 1.000 working hours. 600-800 500 S 45 fourfold gravimetric (2x granulate, 2x powder), twofold volumetric (powder), incl. Con-Trust control 5 87 PIPE LINES Pos. manufacturer type r268511 Battenfeld/Beloit 250-400mm pipe line 150/26 r27026 Weber 16-32mm pipe line PE/PP ES 30 r271291 screw Antrieb year Ø mm L/D capacity kg/h max. 1 x 152 22 500-700 315 DC 80 PE, PP, PS,reconditioned 1996, pipe head up to 400mm, vacuum calibration, puller, saw Speedex P5 1 x 30 25 30-40 8 DC 86 PE, PP, PS, ABS, DC drive, pipe die 16-32mm, vaccum/cooling bath, puller, saw. Against surplus price, manufactured new: Pipe-head inserts and calibrators. Kaufman E 1-60-33 25-75mm pipe line PE, PP 1 x 60 33 50-120 32 85 PE, PP, venting, DC drive, pipe head 25-75mm, calibration bath, pipe cooling bath, 2 belts puller, pipe saw up to 75mm r27099.1 Battenfeld 10-90mm PVC pipe line BEX 2-50-16V 2 x 50 16 50-80 7,5 89 PVC, venting, counter rotation, dosing unit, pipe die, vacuum calibration, puller, saw, extrusion dies and calibration dies against additional price available r27140 Cincinnati 63-110mm PVC pipe line CMT 58 2 x 58-110 con. 150-250 25 88 PVC, DC drive, venting, counter rotation, dosing unit, PVC pipe head 63-110mm, 6m vacuum calibration bath, 2 belts pipe puller, planetary saw, socketing unit r271493 Krauss-Maffei 63-110mm PVC pipeline KMD 60 2 x 60-120 con. 100-300 25 85 PVC, venting, counter rotation, pipedie 63-110mm, pipecalibrationbath 63-110mm, pipe-cooling bath 63-110mm, pipepuller 63-110, pipesaw 63-110mm, tilting table kW Details appr. * depending on the material and kind of production; year ( = year of first production after delivery PLAMA Europe's No. 1 the specialist for plastic machinery ENGINEERING GMBH * GERMANY Bergische Str. 15 D-42781 Haan / Germany Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 6 / 15 PIPE LINES Pos. manufacturer type screw kW appr. r27172.2 Ide DSK 52 63-110mmm PVC pipe line 2 x 52-104 con. 20-150 15 89 PVC, pipe die 63-110mm, calibration bath, cooling bath, puller, saw, venting, vacuum pump, counter rotation, dosing unit r271401 Cincinnati 90-200mm PVC pipe line CMT 58 2 x 58-110 con. 150-250 25 88 r26930 Cincinnati 63-125mm pipe line PVC CM 55 2 x 55-110 con. 150-250 25,4 DC 91 PVC, DC drive, venting, counter rotation, dosing unit, PVC pipe head 90-200mm, 6m vacuum calibration bath, 2 belts pipe puller, planetary saw, - Pipe head inserts and calibrators could be manufactured to order, against surplus price PVC, DC-drive, venting, vacuum tank, puller, saw, belling machine against surplus price r27314.1 Battenfeld 32-125mm pipe line PVC Uni Ex 2-65 2 x 65 120-150 30 88 PVC, venting, counter rotation, water bath, pipe puller, pipe saw, pipe heads inserts and calibration against additional price available r27137 Theysohn/Öswag AT 60 90-160mmm pipe line PVC 2 x 60-132 200-300 33 82 PVC, twin screw extruder, DC-drive, venting, vacuum pump, counter rotation, dosing unit, pipe head, calibration cooling bath, pipe puller, pipe saw r271992 Colines 32-160mm pipeline 1-90-28 1 x 90 28 150-300 79 87 PE, PP, PS, ABS, pipehead, vacuum-calibrationbath, cooling bath, saw, puller. Pipeheadinserts and calibrators against surplus price. r27306.3 Battenfeld 32-160mm pipe line PE, PP 1-90-30 V 1 x 90 30 300-400 110 84/86 PE, PP, venting, pipe die 160mm, calibration bath 160mm, water cooling bath 160mm, 4 belt pipe puller 160mm, planetary saw 160mm r2719921 Colines/Weber 1-90-28 20-160mm Co-Ex pipe line 2 x 90+30 28+ 150-300 25 79+8 87 r272021 Breyer 90-165mm max. pipe line PE/PP 1-90-33 1 x 90 36 200-300 90 85 PE, PP, DC-drive, first extruder 90mm, Co-extruder Weber, Co-Ex pipe head 20-160mm, vacuum cooling bath (6m), 4 belts pipe puller (20-250mm), pipe saw (up to 160mm), incl. 1 set pipe dies and calibration PE, PP, calibration bath, 4 belts, puller, saw, tilting table, with one pipehead r272022 Breyer 1-90-33 110-200mm max. pipe line PE/PP 1 x 90 36 200-300 90 85 PE, PP, calibration bath, puller, saw, tilting table, with one pipehead r270391 Thermatic 110-200mm pipe line E 115/25 1 x 115 26 300-400 93 84 PE, PP, venting, DC-drive, die 110-200mm, vacuum calibration bath, puller, saw, pipe die inserts with calibration against additional price r271492 Krauss-Maffei 110-200mm PVC pipeline KMD 60 2 x 60-120 con. 100-300 25 85 r272991 Cincinnati CMT 58 110-200mm PVC pipe line 2 x 58-125 120-300 32,5 88 r27306.2 Battenfeld 63-200mm pipe line 1-90-30 V 1 x 90 300-400 110 84/86 PVC, venting, counter rotation, PVC-pipedie 110-200mm, pipe-calibrationbath up to 200mm, pipe-cooling bath up to 200mm, 6-rope pipepuller Battenfeld R 200/6, pipesaw Speedex up to 200mm, tilting table PVC, DC drive, venting, counter rotation, pipe head 112200mm, calibration bath 120-200mm/6m, cooling bath 120200mm/6m, pipe puller 110-200mm/4 belts, pipe saw 110200mm PE, PP, PS, ABS, venting, pipe die 200mm, calibration bath 200mm, 4 belts puller 200mm, planetary saw 63-250mm r268571 Theysohn/Öswag 90-250mm pipe line PVC AT 88 2 x 88-151 300-400 70 85 r27138 Theysohn/Öswag AT 88 110-250mm pipe line PVC 2 x 88-151 300-400 70 82 r27191.3 Cincinnati 90-250mm PVC pipe line CMT 58 2 x 58-125 con. 200-350 32,5 91 r27136 Battenfeld 160-400mm pipe line PP 1-150-30 V 1 x 150 30 300-600 160 92 r268512 Beloit - Italy 140-400mm pipeline 150/26 1 x 152 28 300-600 351 80 Ø mm L/D capacity kg/h max. 16 30 Antrieb year * depending on the material and kind of production; year ( = year of first production after delivery Details PVC, venting, vacuum pump, counter rotation, pipe die, calibration bath, water cooling bath, puller Sica, saw Speedex - Pipe head inserts and calibrators could be manuctured to order, against surplus price. PVC, twin screw extruder, DC-drive, venting, vacuum pump, counter rotation, dosing unit, pipe head, calibration cooling bath, pipe puller, pipe saw PVC, pipe die 90-250mm, calibration bath, cooling bath, puller, saw, DC-drive, venting, vacuum pump, counter rotation, dosing unit, - Pipe head inserts and calibrators could be manufactured to order, against surplus price. PP, venting, PP pipe die 250-630mm, without dies, Kuag vacuum calibration bath 250-630mm - 6m, year 1991, cooling bath 250-630mm, IPM pipe puller 8 belts type TR 630/8, vear 1995, Speedex pipe saw P5, 250-630mm, tilting table Bergische Str. 15 D-42781 Haan / Germany PLAMA Europe's No. 1 the specialist for plastic machinery Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 7 / 15 PIPE LINES Pos. manufacturer type screw kW appr. r27391.4 Cincinnati CMT 80 160-400mm PVC pipe line 2 x 80-155 con. 550-650 46 94 r268513 Beloit - Italy 200-500mm pipe line 150/26 1 x 152 28 700-900 315 80 r268514 Beloit - Italy 800mm pipe line 150/26 1 x 152 28 300-600 351 80 PE, PP, overhauled in 1996, pipehead 630-800mm, vacuumbath, cooling bath, pipepuller, pipesaw screw L/D capacity kg/h max. drive year Details kW appr. Ø mm L/D capacity kg/h max. Antrieb year Details PVC, DC-drive, venting, vacuum pump, counter rotation, extruder with PLC control, pipe head up to 400mm, vacuum calibration bath, cooling bath, pipe puller, planetary saw, pipe head inserts and calibrations agains surplus price PE, PP, DC-drive, pipe head 200-500mm, Kuag calibration bath DVK 630, 6m Battenfeld cooling bath, pipe puller IPM TR 630/8, Speedex P7 saw ACCESSORIES FOR PIPE LINES Pos. manufacturer type r27145 Battenfeld 250mm pipe saw SR 250 r27220 Krauss-Maffei 20-125mm pipe die r27252 Sica 25-160mm pipe saw r27373 Ø mm 83 Inlays: 110, 160, 200, 250mm, not for inline use 90 co-ex pipe die 20-125mm, PE, PP, PS, ABS NTRS 25-160 82 planetary saw Sica 32-250mm 3 belts Pipe puller C250-3 1996 for pipes from Ø 32-250mm r27374 Speedex 50-250mm Pipe saw CP250MK3 1993 For pipes up to Ø 250mm r27376 Battenfeld 32-250mm pipe puller R200/4 83 r27405 Uniplex pipe vaccum - + cooling bath r27390.3 Speedex pipe puller CT200/3 r27390.4 Sica 32-280mm pipe saw TR 32-280 r27414 Cincinnati 250mm pipe bath RWV 2508 S91 92 r27322.1 Battenfeld vacuum bath V125VA 99 r27441 Leibinger Rohr-Signiergerät Jet-3 2011 r27456 Repiquet vacuum-calibrationbath VAB 315/6 1988 r27455 Battenfeld coolingbath for pipes 400/6 81 vacuum bath Ø 400mm - 6m, Spraybath Ø 400mm - 6m, 4 belts take off "Battenfeld", max. Ø 400mm 89 3 belts puller planetary saw PVC, PE, PP PVC, PE, PP PROFILE LINES Pos. manufacturer type screw Ø mm L/D capacity kg/h max. Antrieb year kW appr. * depending on the material and kind of production; year ( = year of first production after delivery Details Bergische Str. 15 D-42781 Haan / Germany PLAMA Europe's No. 1 the specialist for plastic machinery Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 8 / 15 PROFILE LINES Pos. manufacturer type screw kW appr. pf271912 Cincinnati CMT 58 58-125mm PVC profile line 2 x 58-125 con. 150-250 32,5 91 PVC, DC drive, venting, vacuum pump, calibration table, profile puller, profile saw, tilting table pf272992 Cincinnati 58-125mm PVC profil line CMT 58 2 x 58-125 32,5 88 PVC, DC drive, venting, coounter roation, calibration table mit 3 pumps, puller with saw 240mm, tilting table pf268585 Theysohn/Öswag 200mm PVC profile line AT 60 2 x 60-132 130 150-250 33 82 conical twin screw extruder, PVC, venting, counter rotation, vacuum pump, dosing unit, vacuum calibration, puller, saw pf269685 Cincinnati/I d e 200mm PVC profile line CM 55 2 x 55-110 con. 150-250 25,4 91 PVC, vacuum calibration I d e 3m, I d e puller, saw Kuhne pf27172 Ide 200mm PVC profile line DSK 52 2 x 52-104 con. 20-140 15 89 PVC, venting, counter rotation, dosing unit, vacuum calibration table, I d e puller ME 31 200mm width, extra vacuum calibration, profile punching unit, tilting table pf27226 Battenfeld 200mm PVC profile line Uni Ex 2-50-16 2 x 52 10 89/92 PVC, DC-drive, venting, counter rotation, calibration table, puller, saw, tilting table pf268575 Theysohn/Öswag 240mm PVC profile line AT 88 2 x 88-151 con. 300-500 70 82 conical twinscrew extruder, PVC, venting, counter rotation, vacuum pump, dosing unit, vacuum calibration, puller, saw pf271491 Krauss-Maffei 240mm PVC profile line KMD 60 2 x 60-120 con. 100-180 25 85 PVC, venting, counter rotation, calibrationtable with vacuumpump, puller 3 t. max. 240mm width, saw up to 240mm, tilting table 6m long pf271911 Cincinnati 240mm PVC profile line CMT 58 2 x 58-125 con. 200-350 32,5 91 PVC, calibration table, puller, saw, DC-drive, venting, vacuum pump, counter rotation, dosing unit screw drive year Details kW appr. Ø mm L/D capacity kg/h max. 120-300 16 10-70 Antrieb year Details ACCESSORIES FOR PROFILE LINES Pos. manufacturer type pf260391 Vobau profile line downstream TSQ-P-504-A-300 88 puller with saw pf271711 Krauss-Maffei profile line downstream KM 432-3 89 250mm take uff, 200mm guillotine pf273915 Battenfeld 300mm profile puller + saw 95 saw P250 SX 2400, puller SPR 125 A pf273916 Battenfeld calibration table K 400 V5/12-5 96 12,5m length with 4 pumps pf27413 250mm profile puller pf272661 Battenfeld profile downstream SRR 125 A/P160 SV 92 saw and puller Ø mm L/D capacity kg/h max. blowfilm lines * laminating Pos. manufacturer type bf26955 Kuhne 500mm blowfilm line 35/20 bf27027 Colines 600mm lab-blow film line 45/25 screw Antrieb year Ø mm L/D capacity kg/h max. Details kW appr. 1 x 35 20 30-50 7,7 83 PE, PP, die, laying equipment, puller, winder 1 x 45 25 30-60 14 87 PE, PP, die, cooling tower, puller, double winder for double width 600mm, only 4.900 working hours. drive year Details kW appr. SHEET LINES * THERMOFORMING SHEET LINES * FLAT FILM LINES Pos. manufacturer type screw Ø mm L/D capacity kg/h max. * depending on the material and kind of production; year ( = year of first production after delivery PLAMA Europe's No. 1 the specialist for plastic machinery ENGINEERING GMBH * GERMANY Bergische Str. 15 D-42781 Haan / Germany Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING Ø mm 19.05.2014 max. kW appr. 350-450 160 1988 9 / 15 t27388 Omipa multi-wall sheet line 1-120-33 1 x 120 33 t27527 Reifenhäuser Co-ex-Sheet line RH801-1-33 50-100 33+ 400-500 30 132+23 86/89 t262223 Breyer/I D E 400x0,2-1,5mm, appr. 350 net sheet line 60 20 50-80 11,5 85 t271171 Battenfeld 780mm PVC sheet line K286-0-16/D3 2 x 86 15 150-250 29 77 PVC, venting, counter rotation, dosing unit, die, 3 rolls polishing unit, 2 rolls puller, winder, DC drive t27074 Bellaplast/Henschel 800mm flat film line + thermoforming line HES-120-30 D 120 32 200-300 220 88 PE, PP, PS, ABS, die, screen changer, polishing unit t27202.3 Breyer 800x0,2-6mm sheet line 1-90-33 1 x 90 36 200-300 90 85 PE, PP, PS, ABS, venting, DC-drive, vacuum pump, die 800mm, screen changer, polishing unit, puller, saw t26260 Covema 120/30 820x0,2-1,5mm, appr. 750 net sheet line 120 30 250-350 92 86 PE, PP, PS, ABS, soft-PVC, PET on request, die 820mm, 2 rolls polishing, puller, double winder t27199 Colines 850x0,2-1,2mm sheet line 1 x 90 28 150-300 79 87 t27442 Welex 910mmx0,2-2,0mm sheet line 1 x 90 30 t262601 Covema 1100,2-1,5mm, appr.950 net sheet line 120 30 250-350 92 86 PE, PP, PS, ABS, DC-drive, electrical heating of the cylinder, cooling by fans, conventional controls, die 850mm, 3 rolls polishing stack with new chrominum plated rolls 990mm x Ø 250mm, puller with new rubber rolls, guillotine, cooling stack. PE, PP, ABS, DC-Motor, 90mm extruder with venting, material feeder, die 910x0,2-2,0mm, 3-rolls polishing unit 1040x Ø450mm, with watercooling, rubber roll-puller 1000mm, cooling track 4m, Welex doublewinder PE, PP, PS, ABS, soft-PVC, PET on request, die 11000mm, 2 rolls polishing, puller, double winder t27496.1 Breyer 1150mm brut Co-Ex PPflat-sheetline 0,2-2,5mm brut Battenfeld/Kleinewefers 1200x2-8mm PMMAsheetline 1x 120+45 36 400-600 200 96 1 x 125 25 150-250 59 83 115+64 30+ 24 t27151 1-90-28 120/30 125 H / 25 D 89 f274370 Welex 1200mm CoEx-filmline 181 t270391 Thermatic 1320x0,2-4mm sheet line appr. 1200 net. E 115/25 1 x 115 26 f27187 Welex 1350mm PET sheet line 4.50 VRH 90+50 30+ 300-500 24 110+18 90 t27287 Bandera 1250mm sheet line TR 100/32 100 36 300-400 110 85 t27331.0 Welex 1450x1-5mm sheet line 115/30 1 x 115 30 400 205 91 t272031 Breyer 1500x1-8mm sheet CoEx sheet line 1-90-30 1 x 90 33 200-400 101 80 300-400 93 84 * depending on the material and kind of production; year ( = year of first production after delivery Material: PC or PP. with Degasing, Extruder BREYER (Screw / D: 120 / 33), Vacuumstation with water ring pump and steam traps, Screenchanger GNEUSS SF90, Meltpump MAAG 56/56, Calibrator OMIPA 2400 mm, 10 rolls Haul-off OMIPA, protection film laminating unit,Hot-Knife length cutting OMIPA, Cross saw OMIPA 2200 mm Die Reifenhäuser 1.750mm, 1-16mm, hydraulic screen changer, co-Ex block A/B, co-extuder Reifenhaeuser RH1211-50-30, venting closed, with screen changer, vacuum pump "Busch", air cooled, roller temperating unit "Kelviplast", 3-rolls polishing stack 1.800x Ø400mm, type GKT1800-4.0 DG with single drives, 2 rolls puller with protection film for top laminating, guillotine 2.000mm. PE, PP, PS, ABS, soft-PVC, die, 2 rolls polishing stack 500mm, puller, winder PP, melting pump Maag, die 1150mm, Breyer 3-roller polishing unit 1.200 x Ø 400 mm, 2-roller haul-off 1.200 x Ø 260 mm, double winder with cross cutter, GWK water tempering units -96°C. PMMA, PE, PP, PS, ABS, single screw extruder, DC-Motor, venting, T-die, polishing rolls 1200 x 300mm diam., cooling unit, 2rolls-puller, guillotine PE, PP, PS, ABS, main extruder 115 mm, co-Extruder 64mm, melt pump with controls, hydr. Screenchanger, co-ex block (suitable for 3 extruders), co-ex die 1200mm, 3 rolls polishing stack 1200 x Ø 500mm, antistatic-bath, side stripe cutting, puller, Menzel 2 station winders PE, PP, PS, ABS, venting, die 1320mm, 3 rolls polishing unit, puller, winder or guillotine, saw on request PET, DC-drive, venting vacuum pump, 1350mm Co Ex Flexlip die, 3x1350m x Ø450mm rolls calender stack, 2x1350mm x Ø200mm rolls haul-off with rubber-rolls. Winding station or guillotine. Against surplus price: "Somos" PET granule dryer and vacuumpump. PE, PP, PS, ABS, venting, vacuum pump, melt pump, die 1350mm, 3 rolls polishing unit, single drives, hotknife side cutting, roll temperating, puller with Top- / Bottom lamination device, cross saw 1350mm DC-drive, venting, hydr. Screen changer, Maag melting pump, 1450mm Flex-Lip sheet die, 5 rolls polishing stack 1450mmx450mmØ, hydr. Nip. Individual dc motors for each roll, cooling unit, guillotine 2000mm PE, PP, PS, ABS, venting, DC drive, 2 extruders, die 1500mm, CoEx block, screen changer, 3 rolls polishing unit, puller, guillotine PLAMA Europe's No. 1 the specialist for plastic machinery ENGINEERING GMBH * GERMANY Bergische Str. 15 D-42781 Haan / Germany Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 10 / 15 SHEET LINES * THERMOFORMING SHEET LINES * FLAT FILM LINES Pos. manufacturer type t27479 Reifenhäuser/Kuhne 1400mm (net)x1,0-6,0mm sheet line 1-105-30V/GKT1800 t27344 Breyer/Reifenhäuser 1700x1-12mm sheet line net. appr. 1650mm E-1-105-36 t27334.2 screw drive year Ø mm L/D capacity kg/h max. kW appr. 1 x 105 30 300-400 145 1994 1 x 105 30 400-500 145 87 Battenfeld 115/30 1750x0,1-13mm sheet line 1 x 115 30 500 t27329.0 Kuhne 1750x0,4-5mm sheet line 125/33 1 x 125 33 800 220 88 t27432 Breyer/Reifenhäuser 1650x2,0-6mm Co-Ex sheetline, 1600mm net 1-120/45-36V 1x 120+45 36 400-600 200 86/12 t27475 Breyer/Berstorff 1650mm (net)x4,0-8,0mm sheet line 2 x 140 24 800-1400 650 89/90 t272912 Breyer 1800x2-8,0mm sheet line, 1650mm net 1-120-36 1 x 120 36 400-600 200 90/12 t275070 Cincinnati/Omam 1900 x 1.0-15.0 mm PVC foam sheet line 80 PL 2 x 80 con. con. 450 77,5 97 t27433 Reifenhäuser/Kuhne 2000mm (net)x2-12mm sheet line GKT 2400 1 x 105 30 300-450 145 98 t271071 Reifenhäuser 2100x2-8mm sheet line EH 2400-1-150-30 1 x 150 30 400-600 16-160 83 t27285 Reifenhäuser 2050mm Co-Ex sheet line EH 2400-1-150-33 1 x 150 + 45 33 600-800 + 32 160+36 87 t27379.0 Battenfeld/Breyer 2200x2-12mm Co-Ex sheet line 150/35 1 x 160 35 160 600-700 91 87/00 * depending on the material and kind of production; year ( = year of first production after delivery Details PE, PP, PS, ABS, DC-Motor, venting, vacuumpump, hydr. Screenchanger, melting pump Maag 70/70, melttemperatureand meltpressure sensors, flat sheet die Verbruggen 1500 x 1.0 - 6.0 mm, Reifenhäuser GKT 1800 polishing stack with 3 rollers 1800 x Ø 400mm with single drive, length cutting, multi roll cooling stack, Reifenhäuser 2 rolls puller, Guillotine. PC, PE, PP, PS, ABS, die 1700mm, 3 rolls polishing unit 1800/400mmØ Reifenhäuser, cooling belt 8m, 2 rolls puller 1800mm, guillotine 2000mm PE, PP, PS, ABS, DC-drive, melting pump Maag, 1750mm EDI Fastgap sheet die, 3 roll polishing stack Battenfeld 1750x400mm Ø Battenfeld, hydr. Nip. Chain driven with slipping clutch on to roll, 3 zone pump group with individual pressurized temperature controllers, 1750mm wide 2 roll haul off, 2000mm wide Edwards guillotine PE, PP, PS, ABS, DC-drive, venting, 125mm Kuhne single screw extruder, electrical heated, fan cooled barrel, vented, Extrex 70 melt pump with dc motor and controller, 1750mm Verbruggen flex lip sheet die with deckle facility, 1750mm Repiquet 5 roll polishing stack, 450mm diameter rolls, individual dc drives for each roll hydr. Main nip, 2000mm guillotine, conveyor table PC, PE, PP, PS, ABS, DC-motor, venting, vacuum pump, main extruder Breyer Ø 120mm, Co-extruder Omipa Ø 45mm, melt pump, Co-Ex block, die 1775mm, Reifenhäuser polishing stack GKT 1800 with mit 3 new polishing rolls 1800xØ400mm, side cutting with hotknife, 6m cooling stack, 2rolls haul-off Reifenhäuser, Guillotine, outfeed-table. PE, PP, PS, ABS, DC-Motor, venting, co-rotation, suitable for mill material, Berstorff ZE 130 A mainextruder, screenchanger Kreyenborg KSW 250, melting pump Kreyenborg GPE 140, flat sheet die EDI 1800x4,0-8,0mm, 5 rolls polishing stack Breyer 2000 x Ø 500mm with single drives, side cutting, cooling rolls 8m, 2 rolls puller, guillotine, stacking table PMMA, PE, PP, Breyer 120mm extruder, DC-motor, venting, vacuumpump, melting pump, EDI flatfilm die 1800mm (with deckling), 5-rolls polishing rolls Breyer 2.000xØ 500mm (with single drives), edge trimming, cooling rolls 6m, 2-rubber rollpuller, guillotine, outfeed table, Siemens S 7 control. This liine for the production multipurpose PVC foam sheets is consistin of: CINCINNATI Extruder Titan 80PL-APC (Screw's and barrel only 1.000 h), Drive 77.5 kW DC, Screwspeed: 38 rpm., 2-roll Cincinnati pre nip assembly, OMAM polishing stack 1.900 mm x Ø 400 mm, separate control cabinet, roller tempering units, OMAM 2.000 mm LDFF unit, OMAM 1.600 intensive cooling unit (ICU), OMAM side trimming cutters incl. Rapid side strip cutter, OMAM protective film un-winder, OMAM 1.600 mm transversal cross cutter SC/1600 incl. dust exhauster, OMAM discharge table. PE, PP, ABS, DC-Motor, venting, vacuum pump, melting pump Maag 70/70, sheetdie 2.150mm, 2-12mm, 3 rolls polishing rolls Reifenhäuser GKT 2400x400mm, cooling track, Reifenhäuser 2-rolls puller 2400mm, Reifenhäuser guillotine 2.400mm, 3 rolls tempering units, new rolls PE, PP, PS, ABS, venting, vacuum pump, melting pump, die 2100mm, polishing stack, cooling stack, puller, length saw, cross cutting, stackinig unit, screen changer PMMA, PC, PE, PP, PS, ABS, venting, vacuum pump, meltpump, screen changer, feedblock, coextruder Kuhne, die 2200mm, 3 rolls polishing unit horizontal 2300mm/Ø400mm, cooling unit, tempering unit Kelviplast, puller, hotknife, cross saw, stacking table, PMMA, PS, extruder with water cooled cylinder, DC-drive, venting, vacuum pump, hopperloader with 3 components volumetric dosing unit, Omipa sheet die 2200mm, die holder, cooling track 12m, 2 rolls puller 2300mm with ariblowsystem for waste, with 3 station for length saw, tempering unit, stacking unit, 45mm Co-Extruder, Feedblock for Co-Ex, 2 screen changers, 2 melting pumps, Resotec PLC control PLAMA Europe's No. 1 the specialist for plastic machinery ENGINEERING GMBH * GERMANY Bergische Str. 15 D-42781 Haan / Germany Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 11 / 15 SHEET LINES * THERMOFORMING SHEET LINES * FLAT FILM LINES Pos. manufacturer type t27516 Battenfeld/Omipa 2200x1-8mm CoEx sheet line Uni Ex 1-150-30 t27517 Omipa 2250x1-12mm sheet line t272911 Breyer 2300x2-12mm sheet line t27410 Reifenhäuser/KraussMaffei 2400mm (net)x2-10mm sheet line screw L/D capacity kg/h max. drive year kW appr. 2x 150+60 30 400-600 200+35 150 1 x 150 33 500-600 200 92 1-120-36 1 x 120 36 400-650 200 88 1 x 125 36 400-650 220 92-98 screw L/D capacity kg/h max. Antrieb year 32 180+37 1993 Ø mm Details PC, PMMA, PE, PP, PS, ABS, venting, Omipa 60mm Coextruder, Maag 70/70 melting pump, Omipa die 2200mm, 18mm year 2008, polishing unit horizontal 2250x320 Ømm, cooling unit, Omipa puller 2300mm with film coating, Omipa 3 stations length saw, Breyer square saw 2300mm, Omipa sheet conveyer PC, PMMA, PE, PP, PS, ABS,venting, melting pump, Omipa, Omipa sheet die 2250mm, Omipa horizontal 3 rolls stack 2350mmx300mmØ, Omipa 2300mm puller with PE film applicator, Omipa 3 stations length saw, square saw, palletizer 4500mm PMMA, PC, venting, vacuum pump, Maag melting pump 70/70, screen changer Gneuss SF90, 3 rolls polishing unit 2300x400mm, cooling unit, 4 rolls puller incl. laminating, stacker, sheet die 2300x2-12mm PE, ABS, DC-Motor, venting, vacuum pump, melting pump Maag 70/70, sheetdie 2.600mm, 2-10mm, 3 rolls polishing rolls Reifenhäuser GKT 2600x400mm, with servodrives, cooling track, Reifenhäuser 2-rolls puller 2400mm, Reifenhäuser guillotine 2.400mm, 3 rolls tempering units Castfilm- * stretchfilm- * shrink-film lines * BOPP Pos. manufacturer type f274210 Battenfeld 3-layer (ABA) co-ex castfilm line Uni-Ex 1-120-32 / Uni-Ex 1-60-30 f27423 Betol 800x30-800µ ABA Co-Ex Castfilmline 2 x 75+60 33/3 200-350 3 75+60 f27422 Battenfeld Uni-Ex 1-120-32 / Uni-Ex 1650x0,02-0,08mm 3 layer 1-75-32 Co ex ABA cast film line 2x 120+75 180+86 1993 PE, PP, ABS, DC-drive, co extruder Battenfeld 75mm, melting pump, screen changer, co-ex-block, die 1650mm, chill roll polishing unit with 2 rolls, cooling unit, puller, double winder, edge trim, side stripe grinder, 2 cooling units drive year Details kW appr. Ø mm 2x 120+60 32 500-800 400-700 kW Details appr. 1993 PE, PP, Co-Extruder Battenfeld-Gloenco Ø 60mm, meltpump, screenchanger, CoEx feed block ABA, T-die 1650mm, chill-roll polishing stack with 2 rolls, cooling track, haul-off, double winder, side cutting system with grinder, PE, PP, main extruder 75mm Ø, Co-extruder 60mm Ø, Co-Ex block, die, Chill-Roll polishing unit with 2 rolls, cooling unit, puller, winder, side stripe cutting ACCESSORIES SHEET LINES * FILM LINES * CALENDER LINES Pos. manufacturer type screw t25508 Breyer 3 layer t-die 400x0,3-2mm t27439 Reifenhäuser sheet down stream t27453 Breyer 5 rolls polishing unit 1800x500mm t27467 2400x500mm Ø polising rolls t275071 Maag melting pump Extrex 70/70 t27505 Stückmann + Hillen Guillotine 4mm 105-03 t27508 Plasticservice water cooling unit S.TT 140/6 1998 max. operating pressure: 6 bar, max. operating temperature: 140°C, min. operating temperature: 15°C, 17 ltr. co ntent t27509 Plasticservice water cooling unit S.TT 140/6 1998 max. operating pressure: 6 bar, max. operating temperature: 140°C, min. operating temperature: 15°C, 17 ltr. co ntent Ø mm L/D capacity kg/h max. 80 PE, PP, PS, ABS PE, PP, PS, ABS, polishing unit 1800x400mm, new screws, 3 tempering units, 2 rolls puller, cooling unit 1999 like new, 20,3 kW 3,5 kW * depending on the material and kind of production; year ( = year of first production after delivery Bergische Str. 15 D-42781 Haan / Germany PLAMA Europe's No. 1 the specialist for plastic machinery Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 12 / 15 ACCESSORIES SHEET LINES * FILM LINES * CALENDER LINES Pos. manufacturer type screw t27510 Plasticservice water cooling unit S.TT 140/6 m27165 Cramer dryer S 45 t26924 Reifenhäuser t-die 520x0,3-2mm 80 PE, PP, PS, ABS t27002 Reifenhäuser platen/sheet die 620x0,26mm 85 PE, PP, PS, ABS, PC, PMMA t25934 Esde PVC die 685x0,2-2mm t26124 Reifenhäuser die 800x0,3-10mm t27004 Reifenhäuser platen/sheet die 800x0,26mm t27504 Kuhne double winder t26831 Reifenhäuser double wall die 1100mm t26934 Reifenhäuser sheet/film donwstream 1200mm t27496 Ø mm L/D capacity kg/h max. drive year kW appr. 1998 5 Details max. operating pressure: 6 bar, max. operating temperature: 140°C, min. operating temperature: 15°C, 17 ltr. co ntent 87 PVC, PE, PP, PS, ABS TKS 800 80 PE, PP, ABS, PC, PMMA, chromium 85 PE, PP, PS, ABS, PC, PMMA 1998 2x2,1 kW 80 PS, ABS, PC, coex-die 70 1200mm sheet/film downstream with 3 rolls polishing unit and 2 rolls puller Breyer 1200mm sheet line 96 Breyer 3-roller polishing unit 1.200 x Ø 400 mm, 2-roller hauloff 1.200 x Ø 260 mm, double winder with cross cutter, GWK water tempering units -96°C, t27006 Reifenhäuser coex-platen/sheet die 1250x0,2-6mm 85 PE, PP, PS, ABS, PC, PMMA t263562 double winder 1350mm t27297 Kellermann 1380x2-12mm sheet die t26120 Edi thermoforming sheet die 1422x0,1-1mm t27294 Kellermann 1530x2-12mm sheet die t26250 Omipa platen die 1545x0,5-8mm t27466 1550x1-6mm sheet die t26852 Beloit - Italy 1700x0,2-2,5mm T-die t27296 Kellermann 1775x2-12mm sheet die W2-2/900 GM 120/63 88 H 40 91 vertical, flexible lips, for high pressure, cast-film-die, like new 88 1545 90 1700 90 88 * depending on the material and kind of production; year ( = year of first production after delivery possible co-ex Bergische Str. 15 D-42781 Haan / Germany PLAMA Europe's No. 1 the specialist for plastic machinery Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 13 / 15 ACCESSORIES SHEET LINES * FILM LINES * CALENDER LINES Pos. manufacturer type screw L/D capacity kg/h max. t27295 Kellermann 1775x2-12mm sheet die 86 t27487 Edi sheet die 1800x1,0-8,0mm 1996 PE, PP, with restrictor bar, with deckling t261401 Erwepa T-die 1850x0,2-2mm 93 like new, low working hours, thickness control and selfadjusting equipment for automatical run against additonal price available f255165 double winder 2000mm t25513 sheet die 2200x0,5-5mm t27298 Kellermann 2200x2-12mm sheet die 88 t27293 Kellermann 2200x2-12mm sheet die 88 t27465 Verbrüggen 2250x1-6mm sheet die Ø mm drive year kW appr. 1850 Details 85 PE, PP, PS, ABS THERMOFORMERS* VACUUMFORMING MACHINES Pos. manufacturer type type vt26240 Lensing pressure former, up to 30 cycles/min. B400 vt27043 Illig pressure former up to 50 cycles/min. RDM 50/3 drawing depth mm L/D forming area mm Antrieb year kW Details appr. 100 450 x 300 82 PE, PS, 450x300mm forming area, ceramic double heating, drew max. 100mm, punching unit, max. 25 cycles 30 520 x 300 88 forming area 520x300mm, depth 30mm, double heating, unand rewinder, Illig grinder RS 63 and spare parts available drive year Details kW appr. 2,5 93 from 10 up to 100 kg/hr. 01 like new, for granules and powder with twin screw drive year Details kW appr. MIXER * DOSING UNITS * MIXING UNITS Pos. manufacturer type screw L/D capacity kg/h max. g261409 Brabender liquid dosing unit FDDW H21-DKP/2.25 10-100 mi27034 K-Tron double volumetric dosing unit LWF 3/T. 37 400-600 Ø mm GRINDERS Pos. manufacturer type type knife width mm L/D throat m27156 Dreher Randstreifenmühle m27457 grinder m27000 Herbold grinder 25/30 300 300 x 300 11 92 blower, cyclone, open rotor, 150-250kg/h m27276 Plama grinder MN 300/400 400 300 x 400 15 07 rotor speed 900rpm, additional blowing device against surplus price drive year Details mm incl. blower and cyclone MISCELLANEOUS Pos. manufacturer type screw L/D capacity kg/h * depending on the material and kind of production; year ( = year of first production after delivery Bergische Str. 15 D-42781 Haan / Germany PLAMA Europe's No. 1 the specialist for plastic machinery Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING Ø mm kg/h max. 19.05.2014 kW 14 / 15 appr. v26988 Somos drying funnel GFK 501 88 v26987 Somos drying funnel GFK v26982 Somos drying funnel GFK v26986 Somos drying funnel GFK v26985 Somos drying funnel GFK v26984 Somos drying funnel GFK v26983 Somos drying funnel GFK v26990 Somos drying funnel GFK 501 88 v26989 Somos drying funnel GFK 91 v27415 Weiß climate cabinet 300 SB 86 v27473 Busch vacuum pump MM 1252 AV 06 v27506 Colortronic dryer T 121 1988 15663 Plasticservice water cooling unit STT 140/24 31,5 90 CHILLERS * HEATING-/COOLING UNITS Pos. manufacturer type type heat. capac. kW cooling capac. kW drive year 15663 Plasticservice water cooling unit STT 140/24 kW appr. 31,5 90 15810 OMF chiller 15828 MTA compress airdryer DE 170 HP 15814 MTA chiller Cool EVO 121 39 18 15823 MTA cold water aggregate Cool EVO 602 130 38,2 15470 Conair chiller CC A 8 24kW 20750kcal/h equipment 9m³/h at 12°C water temperature and 6 bar water pressure 2,37 24 * depending on the material and kind of production; year ( = year of first production after delivery 1020m³/h 08 max. flow 18,0m³ - at 2,2 bar, working pressure max 6 bar, nominal cooling capacity 39kW at 7°C and 30°C outside temperature 2009 Cold achievement 130 kW at 7 / 12°C and 32°C environment temperature, 2 chill circulations, cold means R407C, min flow 22.3 m ³ / h with 3.3 cash, max. flow 48.0 m ³ with 1.9 cash, test place checked, density certificate in 2010. like new, air cooled 88 Europe's No. 1 the specialist for plastic machinery Bergische Str. 15 D-42781 Haan / Germany PLAMA Tel.: +49-2129-94160 Fax: +49-2129-941699 eMail: [email protected] http://www.plama.de ENGINEERING GMBH * GERMANY 20km from Düsseldorf airport EXTRUDERS * EXTRUSION LINES * THERMOFORMING 19.05.2014 CHILLERS * HEATING-/COOLING UNITS Pos. manufacturer type type heat. capac. kW cooling capac. kW hk268486 Single heating-/cooling unit STO 1-24-60-D 24 hk268488 Single heating-/cooling unit STO 1-48-80-D 48 drive year kW appr. 7,5 88 7,5 88 * depending on the material and kind of production; year ( = year of first production after delivery equipment 15 / 15
© Copyright 2025 ExpyDoc