Catalogue 2014 full ISE web

CATALOGUE 2014
PRODUCTS CREATED BY
HDM1
HD DVB-T Encodulator
Introduction
Features
Integration of Encoder and DVB-T COFDM Modulator in one box.
HDMI and CVBS video interface
Compliant with HDMI 1.3, HDCP 1.4 and DVI 1.0 specifications
RF output, DVB-T COFDM compatible
Frequency range : 50~860MHz
Programmable PMT/Video/Audio/PCR PID
Programmable Network ID, Network Name, Service Name,
Private Data Specifier and Logical Channel Number
User Friendly user interface controlled via USB
The HDM1 is HDMI or CVBS video inputs high and standard definition
DVB-T COFDM modulator which provide COFDM RF signal in range of
100-860MHz. HDM1 is designed to achieve up to 1080p by using H.264
encoding engine and state-of-the-art COFDM modulation technologies. The
HDM1 is an excellent choice to transport video/audio signals from TV
satellite receivers, surveillance camera, media players, PC or Laptop to a
LCD TV or set-top box.
Specifications
Model Name
HDM1
Modulator
Video
Channel Number
Input Format
1
HDMI CVBS
Encoding Format
H 264 AVC
Video Resolutions
Up to 1080p 30Hz
Connector
HDMI, mini Jack
Audio
Channel Number
Input Format
Encoding Format
Connector
1
Stereo L/R channel
MPEG-1 Audio Layer II (ISO/IEC 11172-3)
Service Name
Network Information
Transport Stream D
Logical Channel Number
Bandwidth
Constellation
16 bits
Number up to 1023
QPSK / 16QAM / 64QAM
Guard Interval
1/4 , 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
Frequency Range
Output Level
MER
100 ~ 860 MHz
90dBuV
32 dB
System
User Interface
Network Name / Original Network D / Network ID / Private Data Specifier
6 / 7 / 8 MHz
Code Rate
PMT / Video / Audio / PCR
15 Words
DVB-T (ETSI EN 300 744)
2K / 8K
Carriers
Mini Jack
Stream
PID Setting
Standard
USB
General
Type
Dimensions
Power Source
PWR. Consumption
DIN Rail
125mm(H) x 30mm(W) x 78mm(D)
Power Feeding 12V
12W
HD-MOD-001T/C
HD encoder & DVB-T and DVB-C Modulator, input YUV optional
Introduction
Features
Integration of HD Encoder and DVB-C Modulator in one box.
Various video input include: HDMI, Component Video (YPbPr) and
Composite Video (CVBS)
Multiple video format compatibility including 1080i , 720p , 576p , 576i ,
480p and 480 i
Multiple audio format compatibility including MPEG -1 Layer II
Fully comply with DVB-C standard
Frequency range : 50 - 860 Mhz
Programmable video / audio / PCR PID
Programma channel name and logical channel number insertion
User friendly setup and control , Remote management hrough Telnet
The HD-MOD-001T/C is a YPbPr (or HDMI op ional) input high definition
DVB-T modulator which provide OFDM RF signal in range of 47-860MHz.
HD-MOD-001T/C is designed to achieve 1080i by using MPEG2 low latency
encoding engine and state-of-the-art DVB-T modulation technologies. The
HD-MOD-001T/C is an excellent choice to transport video/audio signals
from TV satellite receivers, surveillance camera or video/media players to a
LCD TV or set-top box.
Specifications
Model Name
Audio
Input Format
Encoding Format
Connector
Input Format
Stereo L/R channel
Channel Name
HDMI (Option)
Encoding Format
RCA (75 Ohm)
Video Resolutions
1080i/720p/576p/480p/576i/480i
Connector
15 Words
Standard
Bandwidth
Logical Channel Number
Number up to 16383
Carriers
Control
Constellation
LCD Panel
10/100M Ethernet Telnet
General
Dimensions
Weight (typical)
Power Source
0 8 kg
DC12V (10.5 to 13.0V) SMPS (100-240 VAC/50Hz)
DVB-T (ETSI EN 300 744)
6 / 7/ 8 MHz
2K / 8K
QPSK / 16QAM / 64QAM
Guard Interval
1/4 , 1/8, 1/16, 1/32
Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
Frequency Range
44mm(H) x 234mm(W) x 204mm(D)
RCA (75 Ohm)
Modulator
Video / Audio / PCR
Number up to 16383
User Interface
CVBS, Component Video (Option)
MPEG-1 Audio Layer II (ISO/IEC 11172-3)
Logical Channel Number
Local Operation
Component Video; CVBS, YPbPr, RCA (75 ohm)
MPEG-2 Video (ISO/IEC 13818-2), MPEG2 MP@MLMPEG2
MP@H-14L / MPEG2 MP@HL
System
P D Setting
Video
HD-MOD-001T/C
Output Level
MER
50 ~ 860 MHz
80dBuV
30 dB
HD-MOD-002T/C
HD encoder & DVB-T and DVB-C Modulator , 2 HDMI & 2 SDI
Introduction
Features
Integration of HD Encoder and DVB-T/C Modulator or J.83B in one box.
Dual HDMI video inputs & 2 SDI inputs
Automatic video format recognition 1080i , 720p , 576p and 480p
Multiple audio format compatibility including MPEG -1 Layer II
Fully comply with DVB-T/C standard and J.83B standard
Frequency range : 50 - 860 Mhz
Programmable video / audio / PCR PID
Programmable channel name and logical channel number insertion
User friendly configura ion interfaces including LCD with buttons and web
browser
The HD-MOD-002T/C is a YPbPr (or HDMI op ional) input high definition
DVB-T modulator which provide OFDM RF signal in range of 47-860MHz.
HD-MOD-002T/C is designed to achieve 1080i by using MPEG2 low latency
encoding engine and state-of-the-art DVB-T modulation technologies. The
HD-MOD-002T/C is an excellent choice to transport video/audio signals
from TV satellite receivers, surveillance camera or video/media players to a
LCD TV or set-top box.
Specifications
Model Name
Input Format
Encoding Format
Connector
Input Format
Stereo L/R channel
Channel Name
HDMI (Option)
Encoding Format
MPEG-2 Video (ISO/IEC 13818-2), MPEG2 MP@MLMPEG2
MP@H-14L / MPEG2 MP@HL
RCA (75 Ohm)
Video Resolutions
1080i/720p/576p/480p/576i/480i
Connector
15 Words
Standard
Number up to 16383
Bandwidth
Logical Channel Number
Number up to 16383
Carriers
Control
User Interface
Constellation
LCD Panel
10/100M Ethernet Telnet
General
Dimensions
Weight (typical)
Power Source
0 8 kg
DC12V (10.5 to 13.0V) SMPS (100-240 VAC/50Hz)
DVB-T (ETSI EN 300 744)
6 / 7/ 8 MHz
2K / 8K
QPSK / 16QAM / 64QAM
Guard Interval
1/4 , 1/8, 1/16, 1/32
Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
Frequency Range
44mm(H) x 234mm(W) x 204mm(D)
RCA (75 Ohm)
Modulator
Video / Audio / PCR
Logical Channel Number
Local Operation
2x HDMI, 2x SDI (Option)
CVBS, Component Video (Option)
MPEG-1 Audio Layer II (ISO/IEC 11172-3)
System
P D Setting
Video
HD-MOD-002T/C
Audio
Output Level
MER
50 ~ 860 MHz
80dBuV
30 dB
EMS-RF-00XJ
Multi-SD DVB-T Encodulator
Introduction
Features
Integration of Encoder, TS Mux and DVB-T COFDM Modulator in one box.
Multi-channel video interface, 2 or 4 composite video (CVBS).
Multiple audio format compatibility including MPEG-1 Layer II
DVB-ASI input interface for multiplexing different signals or
expanding CVBS channel capacity in RF output.
RF output, DVB-T COFDM compatible
Frequency range : 50~860MHz
Programmable PMT/Video/Audio/PCR PID
Programmable Network ID, Network Name, Service Name, Private Data
Specifier and Logical Channel Number
User Friendly Front Panel Operation and remote Web Server control by
LAN
The EMS-RF-00XJ is 2 or 4 composite video inputs standard definition
DVB-T COFDM modulator which provide COFDM RF signal in range of
50-860MHz. EMS-RF-00XJ is designed to achieve 576i/480i by using
MPEG2 low latency encoding engine and state-of-the-art COFDM modulation technologies. The EMS-RF-00XJ is an excellent choice to transport
video/audio signals from TV satellite receivers, surveillance camera or
video/media players to a LCD TV or set-top box.
Specifications
Model Name
Channel Number
Input Format
Modulator
EMS-RF-00XJ
Video
Standard
2 or 4
CVBS, Component Video (Option)
DVB-T (ETSI EN 300 744)
Bandwidth
6 / 7 / 8 MHz
Carriers
2K / 8K
Encoding Format
MPEG-2 Video (ISO/ EC 13818-2), MPEG2 MP@ML
Constellation
QPSK / 16QAM / 64QAM
Video Resolutions
576i/480i
Guard Interval
1/4 , 1/8, 1/16, 1/32
Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
Connector
RCA (10K Ohm)
Audio
Channel Number
Input Format
Encoding Format
Connector
2 or 4
Stereo L/R channel
MPEG-1 Audio Layer II (ISO/ EC 11172-3)
User Interface
Dimensions
Power Source
PWR. Consumption
100~105dBuV
MER
38 dB
Carrier
1 or 4
Stream
P D Setting
LCD Panel
10/100M Ethernet Web Browser
General
Type
50 ~ 860 MHz
Output Level
RCA (10K Ohm)
System
Local Operation
Frequency Range
Service Name
Network Information
Transport Stream D
19 inch Rack Mount
Logical Channel Number
40W
15 Words
Network Name / Original Network ID / Network ID / Private Data
16 bits
Number up to 1023
ASI
44mm(H) x 440mm(W) x 280mm(D)
AC 110~240V
PMT / Video / Audio / PCR
Input
1
Output
3
SDM4
Multi-SD DVB-T Encodulator
Introduction
Features
Integration of Encoder, TS Mux and DVB-T COFDM Modulator in one box.
Multi-channel video interface, 4 composite video (CVBS).
Multiple audio format compatibility including MPEG-1 Layer II
RF output, DVB-T COFDM compatible
Frequency range : 50~860MHz
Programmable PMT/Video/Audio/PCR PID
Programmable Network ID, Network Name, Service Name,
Private Data Specifier and Logical Channel Number
User Friendly configuration of RF frequency via Knob and remote Web
Server control by LAN
The SDM4 is 4 composite video inputs standard defini ion DVB-T
COFDM modulator which provide COFDM RF signal in range of
50-860MHz. SDM4 is designed to achieve 576i/480i by using MPEG2 low
latency encoding engine and state-of-the-art COFDM modulation technologies. The SDM4 is an excellent choice to transport video/audio signals from
TV satellite receivers, surveillance camera or video/media players to a LCD
TV or set-top box.
Specifications
Model Name
Channel Number
Input Format
Encoding Format
Video Resolutions
Connector
Standard
2 or 4
CVBS, Component Video (Option)
Input Format
Encoding Format
Connector
Service Name
Network Information
Transport Stream D
Logical Channel Number
Carriers
DVB-T (ETSI EN 300 744)
6 / 7 / 8 MHz
2K / 8K
Constellation
576i/480i
Guard Interval
1/4 , 1/8, 1/16, 1/32
Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
RCA (10K Ohm)
2 or 4
Stereo L/R channel
MPEG-1 Audio Layer II (ISO/IEC 11172-3)
50 ~ 860 MHz
Output Level
100~105dBuV
MER
38 dB
Carrier
1 or 4
System
Local Operation
PMT / Video / Audio / PCR
User Interface
16 bits
Number up to 1023
888 LED Display, Knob
10/100M Ethernet Web Browser
General
15 Words
Network Name / Original Network ID / Network ID / Private Data
QPSK / 16QAM / 64QAM
Frequency Range
RCA (10K Ohm)
Stream
P D Setting
Bandwidth
MPEG-2 Video (ISO/ EC 13818-2), MPEG2 MP@ML
Audio
Channel Number
Modulator
SDM4
Video
Type
Dimensions
Power Source
PWR. Consumption
DIN Rail
236mm(H) x 39mm(W) x 224mm(D)
Power Feeding 12V
25W
HDM-MX-2888CO
HDMI Matrix over Single Coax with Bi-directional IR
HDM-EXT-501CO
HDM-MX-2888CO
Connection Warranty
Model Name
HDM-MX-2888CO
Technical
Role of usage
HDM-MX-2888CO
HDM-EXT-501CO
Transmitter [TX]
Receiver [RX]
HDMI compliance
HDMI Deep Color
HDCP compliance
Yes
Video bandwidth
Single-link 225MHz [6.75Gbps]
Video support
480i / 720p / 1080i / 1080p60 (Does NOT support 480p)
Audio support
Surround sound (up to 7.1ch) or stereo digital audio
HDMI over Coax
transmission range
Full HD [1080p 24-bit color] – up to 120m [394ft]
HDMI Equalization
Auto
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
[1] Human body — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±4kV
PCB stack-up
6-layer board [impedance control — differential 100Ω; single 50Ω]
Input
8x HDMI
8x R socket
1x BNC
1x IR socket
Output
8x BNC
8x R socket
1x HDMI
1x IR socket
IR remote control
Electro-optical characteristics: π = 25° / Carrier frequency: 20-60kHz
HDMI connector
Type A [19-pin female]
BNC connector
3.5mm connector
75Ω interlocking socket
3.5mm earphone jack for IR blaster to control HDMI source device
Mechanical
Housing
Fixedness
Power supply
Support HDMI Deep Color
Power consumption
HDCP compliant
Operation temperature
Single coaxial cable
Storage temperature
7.1-channel audio supported
Relative humidity
Extends the transmission range up to 120m (394ft) from the HDMI
sources under Full HD resolution (1080p60 24-bit color depth) through
Belden 1694A coaxial cable.
Video resolutions support 480i, 576i, 720p, 1080i, and 1080p
Bi-directional IR path
Wall mounting housing design for easy and robust installation
1x HDM-MX-2888CO
12V DC 5A PSE
1x User Manual
Metal enclosure
Interlocking power supply
12V5A DC
24 Watt [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
8x IR blaster
8x IR receiver
HDM-MX-2888C
8x8 HDMI over Single Cat.X with HDBaseT Matrix
Connection Warranty
Model Name
Technical
Role of usage
HDMI compliance
HDM-MX-2888C
HDM-MX-2888C
HDM-MX-2888C-RX
True 8x8 matrix switcher
Transmitter [TX]
Receiver [RX]
HDMI Deep Color & full 3D & 4K2K@30
Yes
HDCP compliance
Video bandwidth
Single-link 340MHz [10 2Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60
Audio support
Surround sound (up to 7.1ch) or stereo digital audio
HDMI over UTP
transmission range
1080p@60 100m (330ft) [CAT5e]
Input TMDS signal
Input DDC signal
ESD protection
PCB stack-up
Input
Output
HDMI Input selection
HDMI source control
R remote control
1 2 Volts [peak-to-peak]
5 Volts [peak-to-peak TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
4-layer board [impedance control — differential 100Ω single 50Ω]
8x HDMI / 1x RS-232 / 1x Ethernet
9x R socket for R receiver
1x RJ-45(HDBaseT) /
1x IR socket for R receiver
8x RJ-45(HDBaseT) / 8x HDMI /
9x IR socket for IR blaster
1x HDMI /
1x R socket for IR blaster
Push-in button / IR remote control /
RS-232 control / Ethernet control
IR remote control
Controllable via R pass-through from IR receiver at RX to R blaster at TX
Electro-optical characteristics: π = 25° / Carrier frequency: 20-60kHz
HDMI connector
Type A [19-pin female]
RJ-45 connector
RS-232 connector
3.5mm connector
Support HDMI Deep Color & full 3D & 4K2K@30 (HDBaseT technology)
Extend the transmission up to 100m (330ft) from the HDMI source at Full
HD 1080p 48-bit
HDCP compliant
Bi-directional IR pass-though
Allows controlling local HDMI sources or display hrough control path
Allows to control main matrix center through control line at remote receiver
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable
transmission
Allows any source to be displayed on multiple displays at the same time
Allows any HDMI display to view any HDMI source at any time
Supports 7.1 channel digital audio
Supports default HDMI EDID and learns the EDID of displays
The matrix master can switch every output channels to any HDMI inputs by
IR remote control, RS-232 and IP control
Easy installation with rack-mounting
Fast response time – 2~4 seconds for channel switch
Mechanical
WE/SS 8P8C
DE-9 [9-pin D-sub female]
Earphone jack for IR blaster
[All IR Out] IR control on all source
devices
[IR1~IR8] IR control on individual source
device
Earphone jack for IR receiver
[System IR] Receives R commands from
remote control
[IR1~IR8] Receives R commands from
individual remote control
Operation
temperature
Storage temperature
Relative humidity
Earphone jack for R receiver
[IR] Receives IR commands from
remote control
HDM-MX-2888C
HDM-MX-2888C-RX
Metal case
Enclosure
Fixedness
Earphone jack for R blaster
[IR] IR control on individual display
device
1RU rack-mount with ears
Wall hanging holes
Wall-mount with screws
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x HDM-MX-2888C
8x HDM-MX-2888C-RX
1x DC power cord for HDM-MX-2888C transmitter
8x DC power cord for HDM-MX-2888C receiver
1x Rack-mounting ear set
9x IR receiver
1x IR blaster
1x IR Remote control
1x Installation software CD
1x User Manual
HDM-MX-2444C
4x4 HDMI over Single Cat.X with HDBaseT Matrix
Connection Warranty
Model Name
Technical
Role of usage
HDMI compliance
HDM-MX-2444C
HDM-MX-2444C
HDM-MX-2444C-RX
True 4x4 matrix switcher
Transmitter [TX]
Receiver [RX]
HDMI Deep Color & full 3D & 4K2K@30
Yes
HDCP compliance
Video bandwidth
Single-link 340MHz [10.2Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60
Audio support
Surround sound (up to 7.1ch) or stereo digital audio
HDMI over UTP
transmission range
Input TMDS signal
Input DDC signal
1080p@60 100m (330ft) [CAT5e]
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak TTL]
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
PCB stack-up
4-layer board [impedance control — differential 100Ω single 50Ω]
Input
4x HDMI / 1x RS-232 /
5x IR socket for IR receiver
1x RJ-45(HDBaseT) /
1x IR socket for IR receiver
4x RJ-45(HDBaseT) / 4x HDMI /
5x R socket for R blaster
1x HDMI /
1x IR socket for R blaster
HDMI Input selection
Push-in button / IR remote control /
RS-232 control / Ethernet control
IR remote control
HDMI source control
Controllable via IR pass-through from R receiver at RX to R blaster at TX
Output
R remote control
HDMI connector
Electro-optical characteristics: π = 25° / Carrier frequency: 20-60kHz
Type A [19-pin female]
RJ-45 connector
RS-232 connector
Support HDMI Deep Color & full 3D & 4K2K@30 (HDBaseT technology)
Extend the transmission up to 100m (330ft) from the HDMI source at Full
HD 1080p 48-bit
HDCP compliant
Bi-directional IR pass-though
Allows controlling local HDMI sources or display hrough control path
Allows to control main matrix center through control line at remote receiver
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable
transmission
Allows any source to be displayed on multiple displays at the same time
Allows any HDMI display to view any HDMI source at any time
Supports 7.1 channel digital audio
Supports default HDMI EDID and learns the EDID of displays
The matrix master can switch every output channels to any HDMI inputs by
IR remote control, RS-232 and IP control
Easy installation with rack-mounting
Fast response time – 2~4 seconds for channel switch
3.5mm connector
Mechanical
WE/SS 8P8C
DE-9 [9-pin D-sub female]
Earphone jack for IR blaster
[All IR Out] R control on all source
devices
[IR1~IR4] R control on individual source
device
Earphone jack for IR receiver
[System IR] Receives IR commands from
remote control
[IR1~IR4] Receives R commands from
individual remote control
Operation
temperature
Storage temperature
Relative humidity
Earphone jack for R receiver
HDM-MX-2444C
HDM-MX-2444C-RX
Metal case
Enclosure
Fixedness
Earphone jack for R blaster
[IR] IR control on individual display
device
1RU rack-mount with ears
Wall hanging holes
Wall-mount with screws
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x HDM-MX-2444C
4x HDM-MX-2444C-RX
1x DC power cord for HDM-MX-2444C transmitter
4x DC power cord for HDM-MX-2444C receiver
1x Rack-mounting ear set
5x IR receiver
1x IR blaster
1x IR Remote control
1x Installation software CD
1x User Manual
HDM-MX-2828C
8x8 HDMI Matrix over single Cat.X with HDBaseT Lite,
Po E & Web-interface
HDM-MX-2828C
HDM-MX-2828C
Connection Warranty
Model Name
HDM-MX-2828C
Technical
HDM-MX-2828C
HDM-MX-2828C
HDM-MX-2828C-RX
True 8x8 matrix switcher
Receiver [RX]
Transmitter [TX]
HDMI Deep Color & full 3D
Yes
Single-link 340MHz [10 2Gbps]
480i / 480p / 720p / 1080i / 1080p60
Surround sound (up to 7.1ch) or stereo digital audio
YES
Role of usage
-MX-2 2
- X
HDMI compliance
HDCP compliance
Video bandwidth
Video support
Audio support
PoE support
HDMI over UTP
transmission range
Input TMDS signal
Input DDC signal
ESD protection
PCB stack-up
1080p@60 60m (198ft) [CAT.X]
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
4-layer board [impedance control — differential 100Ω; single 50Ω]
8x HDMI / 1x RS-232 / 1x RJ-45 for
IP Control / 9x IR socket for IR receiver
Input
1x RJ-45(HDBaseT) /
1x IR socket for R receiver
8x RJ-45(HDBaseT) / 8x HDMI /
1x HDMI /
9x IR socket for IR blaster
1x R socket for IR blaster
Push button / R remote control /
HDMI Input selection
IR remote control
RS-232 control / IP control
HDMI source control
Controllable via R pass-through from R receiver at RX to R blaster at TX
R remote control
Electro-optical characteristics: π = 25° / Carrier frequency: 30-56kHz
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C
RS-232 connector
DE-9 [9-pin D-sub female]
N/A
Earphone jack for IR blaster
[All IR Out] R signal from all outputs
Earphone jack for R blaster
[IR1~IR8] IR control on individual source [IR] IR control on individual display
device
device
3.5mm connector
Earphone jack for IR receiver
[System IR] Receives IR commands from Earphone jack for R receiver
[IR] Receives IR commands from
remote control
[IR1~IR8] Receives IR commands from
remote control
individual remote control
Mechanical
HDM-MX-2828C
HDM-MX-2828C-RX
Metal case
Enclosure
2RU rack-mount with ears
Fixedness
Wall-mount with screws
Wall hanging holes
Power supply
24V 8.3A DC
Power consumption
120 Watts [max]
10 Watt [max]
Operation
0~40°C [32~104°F]
temperature
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
Output
Support HDMI Deep Color & full 3D (HDBaseT Technology)
Extend the transmission up to 60m (198ft) from the HDMI source at Full HD
1080p 48-bit
Support PoE(Power over Ethernet) which can power bo h units from TX side
with power supply
HDCP compliant
Bi-directional IR pass-though
Allows controlling local HDMI sources or display hrough control path
Allows to control main matrix center through control line at remote receiver
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable
transmission
Allows any source to be displayed on multiple displays at the same time
1x HDM-MX-2828C
1x Rack-moun ing ear set
1x DC 24V 8.3A
1x IR Remote control
Supports default HDMI EDID and learns the EDID of displays
8xHDM-MX-2828C-RX
1x Installation software CD
The matrix master can switch every output channels from any HDMI inputs by
Push button, IR remote control, RS-232 and IP control, web-interface control
1x IR receiver
1x User Manual
Allows any HDMI display to view any HDMI source at any time
Supports 7.1 channel digital audio
Easy installation with rack-mounting
Fast response time – 2~4 seconds for channel switch
1x IR blaster
HDM-MX-2424C
4x4 HDMI Matrix over single Cat.X with HDBaseT Lite,
Po E & Web-interface
HDM-MX-2424C
HDM-MX-2424C
Connection Warranty
Model Name
HDM-MX-2424C
Technical
HDM-MX-2424C
HDM-MX-2424C-RX
True 4x4 matrix switcher
Receiver [RX]
Transmitter [TX]
HDMI Deep Color & full 3D
Yes
Single-link 340MHz [10 2Gbps]
480i / 480p / 720p / 1080i / 1080p60
Surround sound (up to 7.1ch) or stereo digital audio
YES
Role of usage
HDM-MX-2424C
M- X-2424 - X
HDMI compliance
HDCP compliance
Video bandwidth
Video support
Audio support
PoE support
HDMI over UTP
transmission range
Input TMDS signal
Input DDC signal
ESD protection
PCB stack-up
1080p@60 60m (198ft) [CAT.X]
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
4-layer board [impedance control — differential 100Ω; single 50Ω]
4x HDMI / 1x RS-232 / 1x RJ-45 for
IP Control / 5x IR socket for IR receiver
Input
1x RJ-45(HDBaseT) /
1x IR socket for R receiver
4x RJ-45(HDBaseT) / 4x HDMI /
1x HDMI /
5x IR socket for IR blaster
1x R socket for IR blaster
Push button / R remote control /
HDMI Input selection
IR remote control
RS-232 control / IP control
HDMI source control
Controllable via R pass-through from R receiver at RX to R blaster at TX
R remote control
Electro-optical characteristics: π = 25° / Carrier frequency: 30-56kHz
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C
RS-232 connector
DE-9 [9-pin D-sub female]
N/A
Earphone jack for IR blaster
[All IR Out] R signal from all outputs
Earphone jack for R blaster
[IR1~IR4] IR control on individual source [IR] IR control on individual display
device
device
3.5mm connector
Earphone jack for IR receiver
[System IR] Receives IR commands from Earphone jack for R receiver
[IR] Receives IR commands from
remote control
[IR1~IR4] Receives IR commands from
remote control
individual remote control
Mechanical
HDM-MX-2424C
HDM-MX-2424C-RX
Metal case
Enclosure
2RU rack-mount with ears
Fixedness
Wall-mount with screws
Wall hanging holes
Output
Support HDMI Deep Color & full 3D (HDBaseT Technology)
Extend the transmission up to 60m (198ft) from the HDMI source at Full HD
1080p 48-bit
Support PoE(Power over Ethernet) which can power bo h units from TX side
with power supply
HDCP compliant
Bi-directional IR pass-though
Allows controlling local HDMI sources or display hrough control path
Allows to control main matrix center through control line at remote receiver
Power supply
Power consumption
Operation
temperature
Storage temperature
Relative humidity
24V 5A DC
120 Watts [max]
10 Watt [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable
transmission
Allows any source to be displayed on multiple displays at the same time
1x HDM-MX-2424C
1x Rack-moun ing ear set
Supports 7.1 channel digital audio
1x DC 24V 5A
1x IR Remote control
Supports default HDMI EDID and learns the EDID of displays
4xHDM-MX-2424C-RX
1x Installation software CD
The matrix master can switch every output channels from any HDMI inputs by
Push button, IR remote control, RS-232 and IP control, web-interface control
1x IR receiver
1x User Manual
Allows any HDMI display to view any HDMI source at any time
Easy installation with rack-mounting
Fast response time – 2~4 seconds for channel switch
1x IR blaster
4x4 Support HDMI Deep Color Matrix
1x HDMI-SPL-2414H
1x 1RU rack mounting ear set
1x Installation CD
1x IR remote control
1x 5V power supply unit
1x User manual
Connection Warranty
Model Name
R ole of us age
HDMI compliance
HDCP compliance
Video bandwidth
Video support
Full HD (1080p)-40m (130ft) [CAT5e] / 50m (165ft) [CAT6]
HD (720p/1080i)-50m (165ft) [CAT5e] / 60m (200ft) [CAT6]
Audio support
Signal equalization
Surround sound (up to 7.1ch) or stereo digital audio
8-level digital rotary switch for signal level control at RX
ESD protection
PCB stack-up
Input
Output
HDMI Input selection
IR remote control
HDMI connector
R S -232 connector
DIP switch
Support HDMI Deep Color compliant
HDCP compliant
Allows any source to be displayed on multiple displays at the same time
Allows any HDMI display to view any HDMI source at any time
Supports 7.1 channel digital audio
Supports default HDMI EDID and learns the EDID of displays
The matrix can switch every output channels to any HDMI inputs by push
button, IR remote control, or RS-232 control1x User manual
True 4x4 matrix s witcher
HDMI Deep Color
Y es
S ingle-link 225MHz [6.75Gbps ]
480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color
HDMI over UTP
transmission [24-bit]
Input TMDS s ignal
Input DDC s ignal
State-of-the-art Silicon Image (founder of HDMI) chipset embedded for utmost
compatibility and reliability
HDM I -S PL -2414H
Hous ing
Dimensions Model
[L x W x H] Package
Model
Weight
P ackage
Fixednes s
P ower s upply
P ower cons umption
Operation temperature
Storage temperature
R elative humidity
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL ]
[1] Human body — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
4-layer board [impedance control — diﬀerential 100Ω ; single 50Ω ]
4x HDMI + 1x R S -232
4x HDM
Push button / IR remote control / RS-232
Electro-optical characteristics:τ = 25° / Carrier frequency: 36~40kHz
Type A [19-pin female]
DE- 9 [9-pin D-s ub female]
[SW1~SW4] 2-pin for EDID l earning, audio/video settings
[SW Main] 4-pin operation mode & ﬁrmware update
Metal enclos ure
440 x 110 x 44mm [1 5”x4.3”x1.7”]
490 x 225 x 70mm [1 7.3”x8.9”x2.8”]
1075g [2.4 lbs ]
2090g [4.6 lbs ]
1U rack-mount with ears and wall hanging holes
5V 6A DC
20 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% R H [no condens ation]
HDM-SPL-2402
1x2 HDMI Splitter with 4K2K
Connection Warranty
Model Name
HDMI
RS-232
HDM-SPL-2402
Technical
Role of usage
Blu-ray Player
HDMI compliance
DVI compliance
HDCP compliance
HDMI CABLE
Video bandwidth
RS232 CABLE
Flat Panel Display
FW upgrade
V with HDMI Input
Supports HDMI Deep Color & 3D / DVI 1.0 compliant
HDCP 1.3 compliant
Wide frequency range: 25MHz~340MHz
Video bandwidth: 10.2Gbps
Resolution up to 4k 2K 297MHz video
Up to 4K 2K 297MHz
Audio support
RS-232 firmware update for expanding compatibility
Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
Easy installation
ARC
1x DC 5V 4A in-line with C7 power cord
1x User manual
N/A
Input
1x HDMI [7.1ch audio & video]
Output
2x HDMI [7.1ch audio & video]
HDMI connector
Type A [19-pin female]
Mechanical
Housing
Dimensions
[L x W x H]
Weight
Metal enclosure
Model
187 x 87 x 25mm [7.4" x 3.4" x 1"]
Package
264 x 170 x 77mm [10.4" x 6.7" x 2.8"]
Carton
420 x 358 x 291mm [1'5" x 1'2" x 11.5"]
Model
463g [16 3 oz]
Package
Fixedness
Power supply
Power consumption
Storage temperature
1x Rack-mounting ear set
Feasible via RS-232 port
N/A
HDMI 1.4 Ethernet
Operation temperature
1x HDM-SPL-2402
[1] Human body model — ±19kV [air-gap discharge] & ±12kV
[contact discharge]
[2] Core chipset — ±2kV
4-layer board [impedance control — differential 100Ω; single 50Ω]
Firmware update
Automatic EDID learning
Supports xvYCC, x.v.Color & Deep Color
Single-link 340MHz [10.2Gbps]
DTS-HD Master Audio, Dolby TrueHD Dolby Digital,
DTS, DVD-Audio, LPCM, SACD, MPCM
PCB stack-up
HDMI CABLE
DVI 1.0
HDCP 1.3
Video support
ESD protection
HDM-SPL-2402
HDMI Deep Color, full 3D & 4K2K
Relative humidity
946g [1.0 lbs]
1RU rack-mounting case with ears
5V 4A DC
10 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
HDM-SPL-2404
1x4 HDMI Splitter with 4K2K
Connection Warranty
Model Name
HDM-SPL-2404
Technical
Role of usage
HDMI compliance
DVI compliance
HDCP compliance
Video bandwidth
HDMI Deep Color, full 3D & 4K2K
DVI 1.0
HDCP 1 3
Single-link 340MHz [10.2Gbps]
Video support
Up to 4K 2K 297MHz
Audio support
DTS-HD Master Audio, Dolby TrueHD Dolby Digital,
DTS, DVD-Audio, LPCM, SACD, MPCM
ESD protection
PCB stack-up
[1] Human body model — ±19kV [air-gap discharge] & ±12kV
[contact discharge]
[2] Core chipset — ±2kV
4-layer board [impedance control — differential 100Ω; single 50Ω]
Firmware update
ARC
Feasible via RS-232 port
N/A
HDMI 1.4 Ethernet
N/A
Input
1x HDMI [7.1ch audio & video]
Supports HDMI Deep Color & 3D / DVI 1.0 compliant
Output
4x HDMI [7.1ch audio & video]
HDCP 1.3 compliant
HDMI connector
Wide frequency range: 25MHz~340MHz
Mechanical
Video bandwidth: 10.2Gbps
Housing
Resolution up to 4k 2K 297MHz video
Automatic EDID learning
Supports xvYCC, x.v.Color & Deep Color
RS-232 firmware update for expanding compatibility
Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
Easy installation
Dimensions
[L x W x H]
Weight
Metal enclosure
Model
325 x 196 x 92mm [12 8" x 7.7" x 3.6"]
Carton
490 x 426 x 352mm [1'6" x 1'4" x 14"]
Model
583g [20.5 oz]
Package
1126g [2.5 lbs]
Fixedness
Power consumption
1x Rack-mounting ear set
1x DC 5V 4A in-line with C7 power cord
1x User manual
238 x 86 x 26mm [9.4" x 3.4" x 1"]
Package
Power supply
1x HDM-SPL-2404
Type A [19-pin female]
Operation temperature
Storage temperature
Relative humidity
1RU rack-mounting case with ears
5V 4A DC
10 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
HDM-SPL-2408
1x8 HDMI Splitter with 4K2K
Connection Warranty
Model Name
HDM-SPL-2408
Technical
Role of usage
HDMI compliance
DVI compliance
HDCP compliance
Video bandwidth
HDMI Deep Color, full 3D & 4K2K
DVI 1.0
HDCP 1.3
Single-link 340MHz [10 2Gbps]
Video support
Up to 4K 2K 297MHz
Audio support
DTS-HD Master Audio, Dolby TrueHD Dolby Digital,
DTS, DVD-Audio, LPCM, SACD, MPCM
ESD protection
PCB stack-up
[1] Human body model — ±19kV [air-gap discharge] & ±12kV
[contact discharge]
[2] Core chipset — ±2kV
4-layer board [impedance control — differential 100Ω; single 50Ω]
Firmware update
ARC
Feasible via RS-232 port
N/A
HDMI 1.4 Ethernet
N/A
Input
1x HDMI [7.1ch audio & video]
Supports HDMI Deep Color & 3D / DVI 1.0 compliant
Output
8x HDMI [7.1ch audio & video]
HDCP 1.3 compliant
HDMI connector
Wide frequency range: 25MHz~340MHz
Mechanical
Video bandwidth: 10.2Gbps
Housing
Resolution up to 4k 2K 297MHz video
Automatic EDID learning
Supports xvYCC, x.v.Color & Deep Color
RS-232 firmware update for expanding compatibility
Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
Easy installation
Dimensions
[L x W x H]
Weight
Metal enclosure
Model
Package
Carton
Model
Package
Fixedness
Power supply
Power consumption
1x HDM-SPL-2408
1x Rack-mounting ear set
1x DC 5V 4A in-line with C7 power cord
1x User manual
Type A [19-pin female]
Operation temperature
Storage temperature
Relative humidity
328 x 102 x 26mm [12.9" x 4" x 1"]
494 x 225 x 70mm [19.4" x 8.9" x 2.8"]
510 x 380 x 252mm [20" x 15" x 10"]
880 g [31 oz]
1.58 kg [3.5 lbs]
1RU rack-mounting case with ears
5V 4A DC
10 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x2 HDMI Splitter
1x HDM-SPL-2002H
1x DC 5V 2A wall wart
1x User manual
Connection Warranty
Model Name
HDM-SPL-2002H
Technical
Role of usage
1x2 Distribution Ampliﬁer (Splitter)
HDMI compliance
DVI compliance
HDCP compliance
Video bandwidth
Audio support
DTS-HD Master Audio, Dolby TrueHD Dolby Digital,
DTS, DVD-Audio, LPCM, SACD, MPCM
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±2kV
4-layer board [impedance control — differential 100Ω; single 50Ω]
Input TMDS signal
Input DDC signal
Resolution up to 1080p or WUXGA (1920x1200)
Automatic EDID learning
Supports xvYCC, x.v.Color & Deep Color
USB firmware update for expanding compatibility
Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
Feasible via USB-port
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
Input
1x HDMI [7.1ch audio & video]
Output
2x HDMI [7.1ch audio & video]
HDMI connector
Type A [19-pin female]
USB connector
Standard type-B [square shape]
Mechanical
Housing
High Speed HDMI - Deep Color & full 3D support
Video bandwidth: 6.75Gbps
Yes
Single-link 225MHz [6.75Gbps]
Up to WUXGA [1920x1200@60Hz] & FullHD [1080p@60Hz]
Firmware update
Wide frequency range: 25MHz~225MHz
DVI 1.0
Video support
PCB stack-up
Support HDMI Deep Color & 3D / DVI 1.0 compliant
High Speed HDMI - Deep Color & full 3D support
Metal enclosure
Model
Dimensions
[L x W x H]
Weight
136 x 92 x 27mm [5.3" x 3.6" x 1.1"]
Package
270 x 175 x 80mm [10.6" x 6.9" x 3.1"]
Carton
450 x 370 x 300mm [1'6" x 1'3" x 11.8"]
Model
364g [12.8 oz]
Package
Fixedness
Power supply
Power consumption
Operation temperature
Easy installation
Storage temperature
Wall-mount housing design for easy installation
Relative humidity
985g [2.2 lbs]
Wall-mount with screws
5V 4A DC
3 Watts [max]
0~40 C [32~104 F]
-20~60 C [-4~140 F]
20~90% RH [no condensation]
1x4 HDMI Splitter
1x HDM-SPL-2004H
1x DC 5V 2A wall wart
1x User manual
Connection Warranty
Model Name
HDM-SPL-2004H
Technical
Role of usage
1x4 Distribution Ampliﬁer (Splitter)
HDMI compliance
DVI compliance
HDCP compliance
Video bandwidth
Audio support
DTS-HD Master Audio, Dolby TrueHD Dolby Digital,
DTS, DVD-Audio, LPCM, SACD, MPCM
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±2kV
4-layer board [impedance control — differential 100Ω; single 50Ω]
Input TMDS signal
Input DDC signal
Resolution up to 1080p or WUXGA (1920x1200)
Automatic EDID learning
Supports xvYCC, x.v.Color & Deep Color
USB firmware update for expanding compatibility
Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
Feasible via USB-port
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
Input
1x HDMI [7.1ch audio & video]
Output
4x HDMI [7.1ch audio & video]
HDMI connector
Type A [19-pin female]
USB connector
Standard type-B [square shape]
Mechanical
Housing
HDCP 1.1 compliant
Video bandwidth: 6.75Gbps
Yes
Single-link 225MHz [6.75Gbps]
Up to WUXGA [1920x1200@60Hz] & FullHD [1080p@60Hz]
Firmware update
Wide frequency range: 25MHz~225MHz
DVI 1.0
Video support
PCB stack-up
Support HDMI Deep Color & 3D / DVI 1.0 compliant
HDMI Deep Color & 3D
Metal enclosure
Model
Dimensions
[L x W x H]
Weight
173 x 92 x 27mm [6.8" x 3.6" x 1.1"]
Package
270 x 175 x 80mm [10.6" x 6.9" x 3.1"]
Carton
450 x 370 x 300mm [1'6" x 1'3" x 11.8"]
Model
448g [15.8 oz]
Package
Fixedness
Power supply
Power consumption
Operation temperature
Easy installation
Storage temperature
Wall-mount housing design for easy installation
Relative humidity
740g [1.6 lbs]
Wall-mount with screws
5V 4A DC
10 Watts [max]
0~40 C [32~104 F]
-20~60 C [-4~140 F]
20~90% RH [no condensation]
1x8 HDMI Splitter
1x HDM-SPL-2008H
1xRack-mounting ear set
1x DC 5V 4A in-line with C7 power cord
1x User manual
Connection Warranty
Model Name
HDM-SPL-2008H
Technical
Role of usage
HDMI compliance
DVI compliance
HDCP compliance
Video bandwidth
High Speed HDMI - Deep Color & full 3D support
DVI 1 0
Yes
Single-link 225MHz [6.75Gbps]
Video support
Up to WUXGA [1920x1200@60Hz] & FullHD [1080p@60Hz]
Audio support
DTS-HD Master Audio, Dolby TrueHD Dolby Digital,
DTS, DVD-Audio, LPCM, SACD, MPCM
ESD protection
PCB stack-up
[1] Human body model — ±19kV [air-gap discharge] & ±12kV
[contact discharge]
[2] Core chipset — ±2kV
4-layer board [impedance control — differential 100Ω; single 50Ω]
Firmware update
Input TMDS signal
Input DDC signal
Feasible via USB-port
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
Input
1x HDMI [7.1ch audio & video]
Output
8x HDMI [7.1ch audio & video]
HDMI connector
Type A [19-pin female]
Mechanical
Housing
HDMI 1.3c and DVI 1.0 compliant
HDCP 1.1 compliant
Dimensions
[L x W x H]
Wide frequency range: 25MHz~225MHz
Metal enclosure
Model
Package
510 x 230 x 70mm[1'8" x 9.1" x 2.8"]
Carton
510 x 410 x 252mm [1'8" x 1'4" x 10"]
Model
Video bandwidth: 6.75Gbps
Weight
Resolution up to 1080p or WUXGA (1920x1200)
Fixedness
Automatic EDID learning
Power supply
Supports xvYCC, x.v.Color & Deep Color
Power consumption
USB firmware update for expanding compatibility
Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
Easy installation
340 x 93 x 43mm [1'0" x 3.7" x 1.7"]
Package
Operation temperature
Storage temperature
Relative humidity
919g [2 lbs]
1760g [3.9 lbs]
1RU rack-mounting case with ears
5V 4A DC
10 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
2x8 HDMI Splitter/Repeater over Cat.X with Local Out
1xHDM-SPL-2208C
2xRack-mounting ear set
1x DC 5V 4A in-line with C7 power cord
1x User manual
Connection Warranty
2x8 HDMI Splitter over Cat.X
1x HDM-SPL-2108C
1x IR remote control
2x Rack-mounting ear
1x DC 5V 4A in-line with C7 power cord
1x User manual
Connection Warranty
Model Name
HDM-SPL-2108C
Technical
Output Ports
HDMI compliance
HDCP compliance
Video bandwidth
Video support
Transmission over
UTP cable (24-bit)
Audio support
Equalization
Input DDC signal
ESD protection
PCB stack-up
Input
Regenerates the HDMI signal
Acts as a 2x1 HDMI switch plus a 1x8 HDMI over Cat.X splitter
Supports default HDMI EDID and has the ability to learn the EDID of
displays
Extends up to 20m (66ft) of input HDMI cable
RJ45 connector
D P switch
Model
Dimensions
Package
[L x W x H]
Carton
Fixedness
1RU rack mountable
[2] Core chipset — ±8kV
4-layer board [impedance control — differential 100Ω; single 50Ω]
Type A [19-pin female]
WE/SS 8P8C with 2 LED indicators
None
Metal enclosure
Housing
Extends up to 40m (130ft) of output Cat-5/5e/6 UTP cable under Full HD
(1080p)
Perfectly integrated with other HDMI over Cat.X series products
5 Volts [peak-to-peak, TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
Mechanical
Weight
Allows cascading
1 2 Volts [peak-to-peak]
4-pin for ED D learning and audio setting modes
Rotary control switch
Extends up to 60m (200ft) of output Cat-5/5e/6 UTP cable under HD
(720p / 1080i)
Pure unaltered uncompressed 7.1ch digital HDMI over UTP cable
transmission
Surround sound (up to 7.1ch) or stereo digital audio
8x RJ45
HDMI connector
HDCP 1.1 compliant
480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color
Full HD (1080p) – 40m (130ft) [Cat5e] / 50m (165ft) [Cat6]
HD (720p/1080i) – 50m (165ft) [Cat5e] / 60m (200ft) [Cat6]
2x HDMI
Output
HDMI 1.3c and DVI 1.0 compliant
Yes
Single-link 225MHz [6.75Gbps]
None
Input TMDS signal
HDMI founder Silicon Image chipsets embedded for superior compatibility
and reliability
HDMI Deep Color
438 x 158 x 44mm[1'5" x 6.2" x 1.8"]
230 x 545 x 110mm[9.1" x 1'10" x 4 3”]
580 x 570 x 260mm [1'11" x 1'11" x 10.2”]
Model
1.4 kg [3.1 lbs]
Package
2200g [4.9 lbs]
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
1RU rack-mount with ears
5V 4A DC
13 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x5 HDMI & Full 3D support over Single CAT5
Distribution Amplifier with Local Output
Connection Warranty
Model Name
HDM-SPL-2105C
Technical
Role of usage
1x5 Distribution Ampliﬁer Transmitter [TX]
HDMI compliance
HDCP compliance
Video bandwidth
Video support
Audio support
Full HD (1080p): 40m (130ft) [Cat5e] / 50m (165ft) [Cat6]
HD (720p/1080i): 50m (165ft) [Cat5e] / 60m (200ft) [Cat6]
Surround sound (up to 7.1ch) or stereo digital audio
Equalization
Built-in
Input TMDS signal
Input DDC signal
ESD protection
PCB stack-up
1 2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
4-layer board [impedance control — differential 100Ω; single 50Ω]
Input
1x HDMI
Output
4x RJ-45 + 1x HDMI
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C
Rotary control switch
None
Mechanical
Housing
Dimensions
[L x W x H]
Weight
Metal enclosure
Model
194 x 110 x 27mm [7.6" x 4.3" x 1.1"]
Package
270 x 175 x 80mm [10.6" x 6.9" x 3.1"]
Carton
450 x 370 x 300mm [1'6" x 1'3" x 11 8"]
Model
Package
Fixedness
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
1x HDM-SPL-2105C
1x DC 5V 4A wall wart
1x User manual
Yes
Single-link 225MHz [6.75Gbps]
480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color
Transmission over
UTP[24-bit color]
Support HDMI Deep Color & full 3D
HDCP compliant
Regenerates the HDMI signal
HDMI local output for monitoring
Supports default HDMI EDID and has he ability to learn the EDID
of displays
Extends up to 20m (66ft) of input HDMI cable
Extends up to 60m (200ft) of output Cat-5/5e/6 solid UTP cable
under HD (720p / 1080i)
Extends up to 40m (130ft) of output CAT-5/5e/6 solid UTP cable
under Full HD (1080p)
Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6
cable transmission
Allows cascading
Perfectly integrated with other HDMI over CAT5 series products
HDMI Deep Color & full 3D
588g [1.3 lbs]
1000g [ 2.2 lbs]
1U rack-mounting with ears
5V 4A DC
13 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x2 HDMI Splitter over Cat.X with Local Out
Connection Warranty
Model Name
HDM-SPL-2201C
Technical
Role of usage
HDMI compliance
HDCP compliance
Video bandwidth
Video support
Transmission over
UTP cable (24-bit)
Audio support
1x2 Distribution Ampliﬁer Transmitter [TX]
HDMI Deep Color & full 3D
Yes
Single-link 225MHz [6.75Gbps]
480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color
Full HD (1080p) – 40m (130ft) [Cat5e] / 50m (165ft) [Cat6]
HD (720p/1080i) – 50m (165ft) [Cat5e] / 60m (200ft) [Cat6]
Surround sound (up to 7.1ch) or stereo digital audio
Signal equalization
N/A
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
ESD protection
PCB stack-up
Input
5 Volts [peak-to-peak, TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
4-layer board [impedance control — differential 100Ω; single 50Ω
1x HDMI
Output
1x HDMI + 1x RJ45 + 1x 3 5mm audio socket
Support HDMI Deep Color & full 3D
HDMI connector
Type A [19-pin female]
HDCP 1.1 compliant
RJ45 connector
WE/SS 8P8C with 2 LED indicators
Regenerates he HDMI signal
3 5mm connector
Supports audio output
DIP switch
Supports default HDMI EDID and has the ability to learn the
EDID of displays
Rotary control switch
Extends up to 15m (50ft) of input HDMI cable
Extends up to 15m (50ft) of output HDMI cable
Extends up to 60m (200ft) (720p / 1080i) of output Cat.X cable
Extends up to 40m (130ft) (1080p) of output Cat.X cable
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.X
cable transmission
Allows cascading
Perfectly integrated with other HDMI over Cat.X series products
None
Mechanical
Housing
Metal enclosure
Model
Dimensions
Package
[L x W x H]
Carton
Weight
180 x 107 x 27mm [7.1" x 4.2" x 1.1"]
200 x 330 x 95mm [7 9" x 1'1" x 3.7"]
495 x 440 x 380mm [1'7" x 1'5" x 1'3"]
Model
515g [1.1 lbs]
Package
1000g [2.2 lbs]
Fixedness
Power supply
Power consumption
1x HDM-SPL-2201C
1x DC 5V 4A wall wart
1x User manual
Earphone jack for stereo audio
2-pin for EDID learning and audio setting modes
Operation temperature
Storage temperature
Relative humidity
Wall-mounting case
5V 4A DC
6 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x2 HDMI Splitter/Repeater over Cat.X
with Local Out
Connection Warranty
Model Name
HDM-SPL-2202C
Technical
Role of usage
1x2 Distribution Ampliﬁer Transmitter [TX]
HDMI compliance
HDCP compliance
Video bandwidth
Transmission over
UTP cable (24-bit)
Audio support
Input TMDS signal
Input DDC signal
ESD protection
PCB stack-up
Full HD (1080p) – 40m (130ft) [Cat5e] / 50m (165ft) [Cat6]
HD (720p/1080i) – 50m (165ft) [Cat5e] / 60m (200ft) [Cat6]
8-level digital output signal equalization
[1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
4-layer board [impedance control — differential 100Ω; single 50Ω
Input
&1x HDMI
Output
1x HDMI + 1x RJ-45 + 1x 3.5mm audio socket
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C with 2 LED indicators
3 5mm connector
Earphone jack for stereo audio
D P switch
None
Rotary control switch
HDMI Signal Level
Mechanical
Housing
Dimensions
[L x W x H]
Weight
Metal enclosure
Model
179 x 107 x 26mm [7" x 4.2" x 1"]
Package
200 x 330 x 95mm [7.9" x 1'1" x 3.7"]
Carton
495 x 440 x 380mm [1'7" x 1'5" x 1'3"]
Model
527g [1.2 lbs]
Package
Fixedness
Power supply
Power consumption
1x HDM-SPL-2202C
1x DC 5V 4A wall wart
1x User manual
Yes
Single-link 225MHz [6.75Gbps]
Surround sound (up to 7.1ch) or stereo digital audio
Signal equalization
State-of-the-art Silicon Image (founder of HDMI) chipset embedded
for utmost compatibilityand reliability
Support HDMI Deep Color & 3D / DVI 1.0 compliant
HDCP 1.1 compliant
Regenerates the HDMI signal
Supports audio output
Extends up to 60m (200ft) (720p / 1080i) of input Cat.X cable
Extends up to 15m (50ft) of output HDMI cable
Extends up to 60m (200ft) (720p / 1080i) of output Cat X cable
Extends up to 40m (130ft) (1080p) of output Cat5/6 cable
Minimizes the cable skew by adjustable 8-level equalization control
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.X cable
transmission
Allows cascading
Perfectly integrated with other HDMI over Cat.X series products
HDMI Deep Color & 3D
Operation temperature
Storage temperature
Relative humidity
985g [2.2 lbs]
Wall-mounting case
5V 4A DC
7 5 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
HDMI Extender over Single Coax with Bi-directional IR
Connection Warranty
Model Name
Technical
HDM-EXT-501CO
HDM-EXT-501CO[Tx]
Role of usage
HDM-EXT-501CO[Rx]
Transmitter [TX]
Receiver [RX]
HDCP compliance
Video bandwidth
Yes
Single-link 225MHz [6.75Gbps]
Video support
480i / 720p / 1080i / 1080p60 (Does NOT support 480p)
Audio support
Surround sound (up to 7.1ch) or stereo digital audio
HDMI over Coax
transmission range
Full HD [1080p 24-bit color] – up to 120m [394ft]
HDMI Equalization
Auto
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
ESD protection
PCB stack-up
5 Volts [peak-to-peak, TTL]
[1] Human body — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±4kV
6-layer board [impedance control — differential 100Ω; single 50Ω]
HDCP compliant
Input
1x HDMI / 1x R socket
1x BNC / 1x IR socket
Single coaxial cable
Output
1x BNC / 1x IR socket
1x HDMI / 1x IR socket
7.1-channel audio supported
IR remote control
Extends the transmission range up to RG6-120m(394ft) from the
HDMI sources under Full HD resolution (1080p60 24-bit color depth)
through Belden 1694A coaxial cable.
HDMI connector
Type A [19-pin female]
BNC connector
75Ω interlocking socket
Extends the transmission range up to RG59/U-70m(230ft) from the
HDMI sources under Full HD resolution (1080p60 24-bit color
depth) through RG59/U-3GHz solid coaxial cable.
Mechanical
Video resolutions support 480i, 576i, 720p, 1080i, and 1080p
Dimensions
[L x W x H]
Bi-directional IR path
3.5mm connector
Housing
Package
Carton
Weight
Model
Package
Fixedness
● 1x HDM-EXT-501CO [TX & RX]
● 1x IR blaster
● 1x IR receiver
● 2x DC 5V 2A wall wart
● 1x User Manual
3.5mm earphone jack for R blaster to control HDMI source device
Metal enclosure
Model
Wall mounting housing design for easy and robust installation
Electro-optical characteristics: π = 25° / Carrier frequency: 20-60kHz
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
80 x 85 x 29mm [3.1" x 3.3" x 1.1"]
175 x 270 x 80mm [6.9" x 10.4" x 3.1"]
370 x 450 x 300mm [1.3" x 1.6" x 1"]
311g [11oz]
622g [1.37 lbs]
Interlocking power supply
5V 4A DC
6 Watt [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
HDMI extender over single cat.X
Connection Warranty
Model Name
Technical
Role of usage
HDM-EXT-0106C
HDM-EXT-0106C [TX]
HDM-EXT-0106C [RX]
Transmitter [Tx]
Receiver [Rx]
HDMI compliance
HDMI Deep Color & full 3D
HDCP compliance
Yes
Video bandwidth
Video support
Single-link 225MHz [6.75Gbps]
480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color
HDMI over UTP
transmission [24-bit]
Audio support
Full HD (1080p)-40m (130ft) [CAT5e] / 50m (165ft) [CAT6]
HD (720p/1080i)-50m (165ft) [CAT5e] / 60m (200ft) [CAT6]
Surround sound [up to 7.1ch) or stereo digital audio
Equalization
8-level digital control at RX
Input TMDS signal
Support HDMI Deep Color & full 3D
Input DDC signal
Extends the transmission up to 60m (200ft) from the HDMI source
at HD 1080i or 720p 24-bit color
ESD protection
1 2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
Extends the transmission up to 40m (130ft) from the HDMI source
at Full HD 1080p 24-bit color
PCB stack-up
Input
1x HDMI
Extends the transmission length up to 20m (65ft) from the HDMI
sources under Full HD resolution(1080p at 36-bit color depth)
Output
1x RJ-45
HDMI connector
HDCP 1.1 compliant
RJ-45 connector
Minimizes the cable skew by adjustable 8-level equalization control
Rotary switch
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6
cable transmission
Mechanical
DTS-HD and Dolby TrueHD high bit rate audio support
Allows cascading
Dimensions
[L x W x H]
Weight
1x HDMI
WE/SS 8P8C with 2 LED indicators
Mode
Signal level
Metal enclosure
Model
[TX/RX] 91 x 60 x 26mm [3.6" x 2.4" x 1"]
Package
270 x 175 x 80mm [10 6" x 6.9" x 3.1"]
Carton
450 x 370 x 300mm [1'6" x 1'3" x 11 8"]
Model
200g [7 oz]
Package
Fixedness
Power consumption
Operation temperature
Storage temperature
Relative humidity
196g [6.9 oz]
900g [2 lbs]
Wall-mounting case with screws
Power supply
● 1x HDM-EXT-0106C [TX & RX]
● 2x DC 5V 2A wall wart
● 1x User manual
1x RJ-45
Type A [19-pin female]
Housing
Wall mounting housing design for easy and robust installation
Perfectly integrated with other HDMI over CAT5 series products
4-layer board [impedance control — differential 100Ω; single 50Ω]
5V 2A DC
4 Watt [max]
1 5 Watt [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
HDM-EXT-0107C
HDMI Extender over Single Cat.X with HDBasedT, RS-232,
Bi-directional IR, Ether net & POE
Connection Warranty
Model Name
Technical
HDM-EXT-0107C
HDM-EXT-0107C [Tx]
HDM-EXT-0107C [Rx]
Transmitter [TX]
Receiver [RX]
Role of usage
HDMI compliance
HDMI Deep Color, full 3D & 4K2K@30
HDCP compliance
Yes
Video bandwidth
Single-link 340MHz [10 2 Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60
HDMI over UTP
1080p@60 100m (330ft) [CAT5e]
Audio support
Surround sound [up to 7.1ch] or stereo digital audio
Equalization
Auto
Input TMDS signal
1 2 Volts [peak-to-peak]
Input DDC signal
ESD protection
PCB stack-up
Support HDMI Deep Color, full 3D & 4K2K@30 (HDBaseT technology)
Extend the transmission up to 100m (330ft) from the HDMI source at Full
HD 1080p 48-bit
Support POE(Power over Cable) which can power both units from TX or
RX with power supply.
HDCP & EDID Bypass
CEC support
Auto equalization
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable
transmission
6-layer board [impedance control — differential 100Ω; single 50Ω]
IR pass-thru
Bi-directional
RS-232 support
Yes
Ethernet support
Yes
POE support
Yes
Input
1x HDMI / 1x 3 5mm
1x RJ-45(Video) / 1x 3.5mm
1x HDMI / 1x 3.5mm
In / Out
1x DIN9 / 1x RJ-45(Ethernet)
1x DIN9 / 1x RJ-45(Ethernet)
HDMI source control
Controllable via IR pass-through from RX to TX with IR extenders
IR remote control
Type A [19-pin female]
HDMI connector
DIN-9
RJ-45 connector
WE/SS 8P8C(Reverse Mode)
Rotary control switch
Support full frequency IR signal from 20KHz to 60KHz
3.5mm connector
Bi-directional IR path-through
Mechanical
Full Duplex RS-232 control up to 115,200 bps through connector
Housing
Integrated Ethernet port for LAN/ network device
Dimensions
[L x W x H]
Weight
● 1x HDM-EXT-0107C [TX & RX]
● 1x IR blaster
● 1x IR receiver
● 1x DC 24V in-line with C7 power cord
● 1x User manual
1x RJ-45(Video) / 1x 3.5mm
Output
DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
Wall mounting housing design for easy and robust installation
5 Volts [peak-to-peak, TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
None
IR receiver / R blaster
R receiver / IR blaster
Metal enclosure
Model
85 x 60 x 25mm [3.3" x 2.4" x 1"]
Package
270 x 175 x 80mm [10 6" x 6.9" x 3.1"]
Carton
450 x 370 x 300mm [1'6" x 1'3" x 11.8"]
Model
320g [11 oz]
Package
720g [1.6 lbs]
Fixedness
Wall-mounting case with screws
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
24V1A
Max 12W
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
HDM-EXT-0110C
HDMI Extender over Single Cat.X with HDBasedT-Lite
& Bi-directional IR
Connection Warranty
Model Name
Technical
Role of usage
HDMI compliance
HDM-EXT-0110C
HDM-EXT-0110C [Tx]
HDM-EXT-0110C [Rx]
Transmitter [TX]
Receiver [RX]
HDMI Deep Color, full 3D & 4K2K@30
HDCP compliance
Video bandwidth
Video support
Yes
Single-link 340MHz [10 2 Gbps]
480i / 480p / 720p / 1080i / 1080p60
HDMI over UTP
Audio support
1080p@60 100m (330ft) [CAT5e]
Surround sound [up to 7.1ch] or stereo digital audio
Equalization
Auto
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
ESD protection
PCB stack-up
Support HDMI Deep Color & full 3D & 4K2K@30 (HDBaseT-Lite
technology)
5 Volts [peak-to-peak, TTL]
[1]
Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
4-layer board [impedance control — differential 100Ω; single 50Ω]
IR pass-thru
Bi-directional
Input
1x HDMI
1x 3.5mm
1x mini-USB
1x RJ-45[HDBaseT]
1x 3 5mm
1x mini-USB
1x RJ-45[HDBaseT]
1x 3.5mm
1x HDMI
1x 3 5mm
Extend the transmission up to 60m (198ft) from the HDMI source at
Full HD 1080p 48-bit and 40m (130ft) at 4K2K@30
Output
HDCP & EDID Bypass
HDMI source control
CEC support
IR remote control
Auto equalization
HDMI connector
Mini B
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6
cable transmission
RJ-45 connector
WE/SS 8P8C(Reverse Mode)
Rotary control switch
DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
Support full frequency IR signal from 20KHz to 60KHz
Bi-directional IR path-through
Wall mounting housing design for easy and robust installation
3.5mm connector
Type A [19-pin female]
None
IR receiver / IR blaster
IR receiver / IR blaster
Mechanical
Housing
Dimensions
[L x W x H]
Weight
● 1x HDM-EXT-0110C [TX & RX]
● 1x IR blaster
● 1x IR receiver
● 2x 5V DC power supply
● 1x User manual
Controllable via IR pass-through from RX to TX with R extenders
Metal enclosure
Model
Package
Carton
Model
73 x 89 x 26mm [2 9" x 3 5" x 1"]
175 x 125 x 216mm [6.8" x 4.9" x 8 5"]
647 x 366 x 237mm [2'1" x 1'2" x 9.3"]
200g [7oz]
196g [6.9oz]
Package
Fixedness
900g [2 lbs]
Wall-mounting case with screws
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
5 V2A DC
3 Watt [max]
7 Watt [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
HDM-SW-0401
4x1 HDMI Switch with IR
Introduction
The HDM-SW-0401 provides easy switching among 4 HDMI sources to
your high definition display including HDMI equipped or DVI enabled
monitors. Full digital and high quality video/audio from any of these 4
sources can perfectly be transmitted to he connected high definition monitor
via IR remote control or front panel button. With HDCP support, up to four
HDMI/DVI sources such as PS3, DVD players, camcorders, or set-top boxes
can seamlessly & simultaneously connected to this HDM-SW-0401.
The HDM-SW-0401 has 4 input HDMI definition receptacle connectors
and 1 output HDMI definition receptacle connector. Users simply connect all
the HDMI/DVI sources to the inputs of HDM-SW-0401, and then connect
HDMI/DVI equipped display system on the output port. Via IR remote control
or front panel button, users can select which source they would like to be
displayed. Auto-scan function provides quick surf on the connected sources
sequentially and auto-detection function makes the device automatically
switch to the first working source among 4 channels at power on. Extra
superior equalization functions on input ports and pre-emphasis on output
ports provide users the most adaptive way to improve the transmission
distance.
Model Name
Role of usage
HDMI compliance
HDCP compliance
Video bandwidth
Video support
up to 15m/50ft at 1080p
Input TMDS signal
Input DDC signal
1x User Manual
1.2 volts (peak-to-peak)
5 volts (peak-to-peak)
ESD protection
[1] Human body model — ±19kV [air-gap discharge] &
±12kV [contact discharge]
[2] Core chipset — ±8kV
PCB stack-up
4-layer board [impedance control — differential 100Ω; single 50Ω
4x HDMI / 1x RS-232 / 1x R Receiver
HDMI connector
RS-232 connector
1x HDMI
Type A [19-pin female]
DE-9 [9-pin D-sub female]
Mechanical
Housing
Fixedness
Power supply
Operation temperature
1x 5V 2A power adapter
480p 720p 1080i 1080p and VESA resolutions
Surround sound (up to 7.1ch) or stereo digital audio
Power consumption
1x IR controller
Yes
6.75 Gbps
Audio support
Output
1x HDM-SW-0401
4x1 switch
HDMI Deep Color
Transmission
Input
Support HDMI Deep Color
Fully HDCP compliant
Handy front panel button to switch any four HDMI/DVI sources
Supports 480p, 720p, 1080i, 1080p, and VESA resolutions
Front panel LED indicators
Equalization on input ports and pre-emphasis on output port
Easy installation
HDM-SW-0401
Technical
Storage temperature
Relative humidity
Metal enclouse
Wall-mounting case
5V 4A DC
5 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
HDMI to 3G/HD/SD-SDI Converter
Connection Warranty
Model Name
HDM-SDI-201
Technical
SDI standards
3G-SDI & HD-SDI & SD-SDI
Auto HD/SD-SDI detection
Video bandwidth
[3G] 1080p50/59 94/60 (4:2 2)
[HD] – 720p @50/59.94/60Hz,1080i @50/59.94/60Hz,
[email protected]/24/25/29 97/30Hz
[SD] – NTSC @59 94Hz, PAL @50Hz
Video support
Input signal
HDMI
Output signal
SDI
Output impedance
75Ω
Synchronization mode
Eye pattern characteristics
Cable equalization
Yes
6-layer board [impedance control — differential 100Ω; single 50Ω]
1x HDMI
2x BNC [SDI]
BNC connector
75Ω inter-locked socket
HDMI connector
Type A [19-pin female]
D P switch
[email protected], 1080i@60, [email protected], 1080p@24, 1080p@25, [email protected],
1080p@3 0, 1080p@50, [email protected], 1080p@60
Bit Rate: 2.97 Gbps, 2.967 Gbps, 1.485 Gbps, 1.4835 Gbps, 270 Mbps
Auto 3G/HD/SD-SDI detection
Support HDMI Deep Color
2-pin [for EDID use]
Mechanical
Metal enclosure
Housing
Dimensions
[L x W x H]
Weight
Model
Package
Model
[TX] – 250g [8.8oz]
Package
Fixedness
Power supply
External DIP Switch Configuration
Operation temperature
Storage temperature
Relative humidity
1x User manual
140 x 200 x 75mm [5 5” x 7.9” x 3”]
420 x 400 x 300mm [1’8” x 1’4” x 11 8”]
Power consumption
2x DC 5V 2A wall wart
79 x 84 x 27mm [3.1” x 3 3” x 1 2”]
Carton
Two SDI compliant outputs
1x HDM-SDI-201
Extra low alignment jitter 0.05UI at HD
[3G-SD ] up to 90m (300ft), [HD-SDI] up to 150m (500ft),
[SD-SD ] up to 300m (1000ft)
PCB stack-up
Output
NTSC [email protected], PAL 625@50, 720p@50,[email protected], 720p@60, 1080i@50,
Internal synchronization or external synchronization
Audio support
Input
Supported high-definition (HD) formats:
Yes
[2 97Gpbs & 2 975/1.001Gbps]
780g [1.7 lbs]
Inter-locked power supply
5V 2A DC
3 Watt [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
IR over CAT5 Extender
Connection Warranty
Model Name
Technical
IR-EXT-050C
TX
Role of usage
RX
Transmitter and Splitter
HDMI compliance
DVI compliance
HDCP compliance
Video bandwidth
Support full bandwidth of IR signal, 20KHz ~ 60KHz
Built-in IR splitter on TX and RX unit
Bi-directional IR path
Super long extension distance
Single power supply on either TX or RX unit
Easy to install
Wall mounting housing design for easy and robust installation
● 1x IR-EXT-050C
● 1x 5V 2A interlocked wall wart power adapter
● 1x User manual
Receiver and Splitter
20 ~ 60 KHz
Human body model — ±19kV [air-gap discharge]
& ±12kV [contact discharge]
1x 3.5mm
1x RJ-45 + 1 x 3.5mm
1x RJ-45 + 2 x 3.5mm
2x 3.5mm
Video support
WE/SS 8P8C with 2 LED indicators
Audio support
Earphone jack for IR Transmitter or Receiver cable
ESD protection
Electro-optical characteristics: 6 = 25°
Carrier frequency: 20-60kHz
Mechanical
Housing
Dimensions
[L x W x H]
Weight
Metal enclosure
Model
[TX/RX] 75 x 55 x 25mm [3.0”x2.2”x1”]
Package
270 x 175 x 80mm [10.6” x 6.9” x 3.1”]
Carton
450 x 370 x 300mm [1’6” x 1’3” x 1’]
Model
[TX/RX] 270g [9.5oz]
Package
Fixedness
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
670g [1.5 lbs]
Wall-mounting case with screws upon request
Inter-locked 5V 2A DC
1 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
Dual-View Digital Signage Processor with Audio Path
Connection Warranty
Model Name
DSB-0200
Technical
Role of usage
Multiplexer / video processor
Built-in PC mother board Built-in.
Dual output support
PC Ethernet/Wi-Fi/USB/….. support.
HDCP compliance
Swappable hard disk tray to ease maintenance.
Three graphic (DVI / VGA) and four video (HDMI /Component /
S-Video / Composite) inputs selections,
from 640x480 to 1920x1200, interlaced or progressive.
Dual video outputs (DVI / HDMI), 640x480 to 1920x1200, and YPbPr,
HD 720p.
Video bandwidth
Video Input support
YES[HDMI/DVI + YPbPr]
Yes
DVI [Single-link 4.95Gbps]
VGA [165MHz]
Component [30MHz]
Composite [13.5MHz]
480i / 480p / 720p / 1080i / 1080p60 / 1920x1200 / 1600x1200@60
Audio support
Yes
HDCP 1.1 Support.
PIP / PAP
Yes
HDMI 1.2a Support.
Cascadable
PIP, PAP, Full screen modes and adjustable size& position through
software.
Input TMDS signal
Yes
Titles, borders and colored backgrounds.
ESD protection
Resize, position and blend output video.
PCB stack-up
Several Image parameters and layouts can be saved in flash memory
and can be recalled for later use.
Video parameters adjustable (brightness, contrast, color temperature,
etc.)
1.2 Volts [peak-to-peak]
Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
6-layer board [impedance control — differential 100Ω; single 50Ω ]
Input
2x VGA + 1x DVI + 1x component +1x Mini-Din9 + 1x USB + 1 x RL Audio
Output
1x DVI + 1x YPbPr + 1 x RL Audio
DVI connector
DVI-I [29-pin female, digital only]
User-selectable output settings, up to 1920x1200.
VGA connector
HD-15 [15-pin D-sub female]
Perfectly as a video screen splitter, a video converter and a video
switcher.
USB connector
Analog audio switcher.
Analog stereo to HDMI audio conversion.
Firmware upgradable for support of new features and technology
enhancements.
Software control through USB.
1x DSB-0200
1x DVI to DVI&VGA breakout cable
1x VGA to component breakout cable
1x DVI to VGA adapter
1x 12V DC power adapte
1x Installation software CD
1x User Manual
1x VGA Cable
1x mini-Din9 to S-Video & CVBS breakout cable
RCA connector
Mini USB
75
female
Mechanical
Housing
Dimensions
[L x W x H]
Weight
Metal case
Model
317 x 215 x 67mm[1'1" x 8 5" x 2.6"]
Package
528 x 155 x 320mm[1'9" x 6.1" x 1'1"]
Carton
543 x 335 x 344mm[1'9" x 1'1" x 1'2"]
Model
2 9 KG[6.4lbs]
Package
4.8 KG[10 6lbs]
Fixedness
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
Wall-mounting case or wall hanging holes upon request
12V 5A DC
50 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
CATALOGUE 2014
PRODUCTS CREATED BY