HPA-300118 Product Specifications Housing: Aluminum Piston: Stainless Steel Handle: Cold Rolled Steel O-ring seals: Revised August 2014 Buna-N Back-up rings: Teflon By-pass relief: Manual Displacement: 1.22 cu. in. (19.99 cu. cm.) per cycle Weight (handle excluded): 5.8 lbs. (2.63 kg) MAWP: 3000 psi (207 bar) Force req'd at 3000 psi: Recommended Fluid: 48.5 lbs. (22 kg) Red hydraulic fluid (MIL-H-5606) Inlet Connection: SAE #6 Outlet Connection: SAE #6 Seal Kit Part Number: KT-202565 Service Kit: KT-202565 Also offered in Ductile Iron KTI Part Number: HPA-308165 Displacement (gal) x Time (min) 4 3.5 3 2.5 2 1.5 1 Note: The graph shown to the right assumes a user can complete one cycle (1.22 in3) every 5 seconds [12 cycles per minute] & remain consistent during a period of 60 minutes. Consult Kocsis Technologies, Inc. engineering for theoretical recharging time for your specific application. 0.5 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 0 General Dimensions 3.6 in. “OUTLET” SAE-6 PORT Ø 0.5 in. “GAGE PORT” SAE-4 5.06 in. “INLET” SAE-6 PORT 3.38 in. 3.8 in. 1.63 in. 4.63 in. 8.88 in. Note: Overall height including handle is 39.25 in. SSHPA118_F
© Copyright 2024 ExpyDoc