Marine equipment TECHNICAL SPECIFICATION SHEET | Boomvang | HVG Boomvangs (mm) model art. nr: clear zwart Working pressure Gas filling pressure Pulling force Max. Pulling force (kN) Min. Pulling force (kN) Piston area (mm2) Stroke Oil content (cc) Type of oil Max Return force (kN) Min Return force (kN) Mpa Mpa kN HVG-12 (B) HVG-17 (B) HVG-22 (B) HVG-30 (B) HVG-40 (B) HVG-60 (B) 160022074 160022075 160022076 160022077 160022078 160022079 160022080 160022081 160022082 160022083 160022062 - 44 4 33.177 N 27.507 N 24.103 N 754 226 170 ISO VG15/22 9.074 N 5.670 N 44 4 44.253 N 37.317 N 33.158 N 1005 231 232 ISO VG15/22 11.085 N 6.926 N 44 4 58.046 N 48.991 N 43.556 N 1319 245 323 ISO VG15/22 14.476 N 9.048 N 44 4 89.055 N 74.909 N 66.424 N 2023 277 560 ISO VG15/22 22.622 N 14.146 N 44 4 133.995 N 114.738 N 103.191 N 3044 302 919 ISO VG15/22 30.803 N 19.247 N 35 4 178.678 N 146.869 N 139.871 N 5105 360 1838 ISO VG15/22 38.807 N 31.809 N Boomvang Oil passage through piston rod This reduces the length of the hydraulic hose, minimising the risk of damage. Pre-set but variable return force Gives you perfect control and easy reefing or flaking. Lightweight Advanced design techniques and materials keep weight to a minimum. Various finish options Clear anodized aluminium finish as standard. Black anodized finish or other colours optional. Marine equipment TECHNICAL SPECIFICATION SHEET | Boomvang | HVG Dimensions (mm) model A cylinder diameter B cylinder connection C cylinder diameter D pin diameter E1 groove width E2 shim width F1 width of jaw F2 width of pin G gas filling opening H plunjer rod diameter I distance to center of pin J depth of groove of jaw L maximum length closed Weight (lb) F2 F1 HVG-12 HVG-17 HVG-17 (B) HVG-22 HVG-22 (B) HVG-30 HVG-30 (B) HVG-40 HVG-40 (B) 54 60 68 84 98 7/16”-20 JIC 7/16”-20 JIC 7/16”-20 JIC 7/16”-20 JIC 7/16”-20 JIC 48 51 55 70 81 15,8 15,8 18,8 22 25,3 16,5 16,5 19,5 22,5 25,5 13,7 13,7 16,5 19,5 22,5 42,5 42,5 49 55 69 46,7 46,7 43,1 59,2 72,2 ¼” BSP ¼” BSP ¼” BSP ¼” BSP ¼” BSP 22 22 25 32 32 23,5 23,5 28,2 31,9 37,8 57,5 57,5 62,2 65,9 72,8 1829 1400 2550 1400 2650 1410 2750 1440 2750 6,5 6,6 10,3 8 11,7 12,7 19,6 17,6 26,1 J J I G C A H B 45° E2 F2 I D E1 HVG-60 130 7/16”-20 JIC 105 31,8 36 33 80 83,2 ¼” BSP 40 41 97 custom custom F1 D E1 E2 L Holmatro Marine Equipment B.V. | P.O. Box 66 | 4940 AB Raamsdonksveer, the Netherlands | T +31 (0) 162 - 751400 | E [email protected] | www.holmatro.com © Holmatro 0508 While the greatest care has been devoted to the content, it is possible that the information in this printed matter is incorrect or incomplete. Holmatro N.V. and its affiliated companies (hereafter: Holmatro) cannot be held liable in any way for the consequences of activities undertaken on the basis of this printed matter. If you have any doubts about the correctness or completeness of the information, you shall contact Holmatro (phone number: +31 (0)162-751480). Nothing from this printed matter can be copied and/or made public in any way without the explicit authorisation of Holmatro. ©Holmatro 980.000.315
© Copyright 2024 ExpyDoc
