Switch-disconnector�3p�160A�BG2 Part�no. Article�no. N2-160 266008 Catalog�No. Delivery�programme Product range Protective function Standard/Approval Installation type Construction size Description Number of conductors Standard equipment Switch positions Rated current = rated uninterrupted current Short-circuit protection max. fuse gLcharacteristic In = Iu A Switch-disconnectors Disconnectors/main switches IEC Fixed N2 Main switch characteristics including positive drive to IEC/EN 60204 and VDE 0113. Isolating characteristics to IEC/EN 60947-3 and VDE 0660. Busbar tag shroud to VDE 0160 Part 100. 3 pole Screw connection I, +, 0 160 A gL 250 Switch-disconnectors Rated surge voltage invariability Uimp V 8000 V 6000 Ue V AC 690 In = Iu A 160 III/3 Ui V 690 V Rated operating voltage: 40-60 Hz Weight Temperature dependency, Derating Effective power loss Ic kA 5.5 Icw kA 3.5 Icw kA 3.5 The rated short-time withstand current for PN2/N2 in conjunction with earth-fault release NZM2-4-XFI...Icw = 1.5 kA With back-up fuse PN2(N2)-160…250: 250 400 … 415 V A gG/ gL kA 100 kA 80 A gG/ gL PN2(N2)-160…250: 250 kA 100 kA 80 Ie A Ie A 250 Ie A 250 Ie A 250 Main contacts Auxiliary contacts Rated operational voltage Rated current = rated uninterrupted current Overvoltage category/pollution degree Rated insulation voltage Use in unearthed supply systems Other technical data (sheet catalogue) Rated�short-circuit�making�capacity 690 V 50/60 H Rated�short-time�withstand�current t = 0.3 s t=1s Rated�conditional�short-circuit�current 690 V With downstream fuse 400 … 415 V 690 V Rated�making�and�breaking�capacity Rated operational current 415 V 690 V 415 V 03/20/2014 HPL-ED2014 V2.13 EN 690 1/5 690 V Ie A 250 Operations 20000 Ops/ h 120 Operations 10000 Operations 10000 Operations 7500 Operations 7500 Operations 7500 Operations 5000 Current heat losses per pole at Iu are based on the maximum rated operational current of the frame size. For current heat loss per pole the specification refers to the maximum rated operational current of the frame size. W 16 Total downtime in a short-circuit For current heat loss per pole the specification refers to the maximum rated operational current of the frame size. ms < 10 Screw connection Lifespan, mechanical Max. operating frequency Lifespan,�electrical 400 V V 50/60 Hz 415 V V 50/60 Hz 690 V 50/60 Hz 400 V 50/60 Hz 415 V 50/60 Hz 690 V 50/60 Hz Terminal�capacity Standard equipment Overview Round copper conductor Box terminal Solid Basic equipment Box terminal Screw connection Accessories Box terminal Screw connection Tunnel terminal Connection on rear Flat conductor terminal Stranded mm Tunnel terminal 1 x (25 - 185) 2 x (25 - 70) Stranded Bolt terminal and rear-side connection Direct on the switch Solid Stranded Al conductors, Cu cable Solid Stranded Stranded Bolt terminal and rear-side connection Flat copper strip, with holes Flat copper strip, with holes Cu strip (number of segments x width x segment thickness) Box terminal 03/20/2014 ● - - - - ● ● ● - ● ● - ● - - ● ● ● ● ● ● ● ● ● - - - ● mm Stranded Solid 2 1 x (4 - 16) 2 x (4 - 16) 2 2 mm 1 x (16 - 185) mm 2 mm 2 1 x (25 - 185) 2 mm 1 x (4 - 16) 2 x (4 - 16) mm 2 1 x (25 - 185) 2 x (25 - 70) mm mm 2 1 x 16 2 mm 2 1 x (25 - 185) min. mm 2 x 16 x 0.8 max. mm 10 x 16 x 0.8 HPL-ED2014 V2.13 EN 2/5 min. mm max. Bolt terminal and rear-side connection Flat copper strip, with holes Flat copper strip, with holes Copper busbar (width x thickness) Bolt terminal and rear-side connection Screw connection Direct on the switch Control cables 2 2 x 9 x 0.8 mm 2 10 x 16 x 0.8 min. mm 2 x 16 x 0.8 max. mm 10 x 16 x 0.8 mm M8 min. mm max. 2 16 x 5 mm 2 20 x 5 mm 2 1 x (0.75 - 2.5) 2 x (0.75 - 1.5) Technical�data�ETIM�5.0 Low-voltage industrial components (EG000017) / Switch disconnector (EC000216) Electric engineering, automation, process control engineering / Low-voltage switch technology / Off-load switch, circuit breaker, control switch / Switch disconnector (ecl@ss8-27-37-14-03 [AKF060009]) Version as switch disconnector 1 compact Version as main switch 1 Version as maintenance-/service 1 switch Version as safety switch 0 Version as emergency stop installation 1 Max. rated operation voltage Ue AC V 690 Rated permanent current Iu A 160 Rated operation power AC-3, 400 V kW 90 Rated operation power at AC-23, 400 V kW 90 Conditioned rated short-circuit current kA 100 Iq Number of poles 3 Number of auxiliary contacts as 0 normally closed contact Number of auxiliary contacts as 0 normally open contact Number of auxiliary contacts as 0 change-over contact Motor drive optional 1 Motor drive integrated 0 Voltage release optional 1 Device construction Built-in device fixed built-in technique Suitable for ground mounting 1 Suitable for front mounting 0 Suitable for front mounting center 0 Suitable for distribution board 1 installation Suitable for intermediate mounting 1 Type of control element Rocker lever Interlockable 1 Connection type main current circuit Screw connection Degree of protection (IP), front side IP20 Dimensions 03/20/2014 HPL-ED2014 V2.13 EN 3/5 Blow out area, minimum clearance to adjacent parts Minimum clearance to adjacent parts 03/20/2014 HPL-ED2014 V2.13 EN 4/5 Additional�product�information�(links) IL01206006Z�(AWA1230-1916)�Circuit-Breaker,�basic�unit IL01206006Z (AWA1230-1916) CircuitBreaker, basic unit 03/20/2014 ftp://ftp.moeller.net/DOCUMENTATION/AWA_INSTRUCTIONS/IL01206006Z2013_07.pdf Eaton Industries GmbH http://www.eaton.eu © 02/2014 by Eaton Industries GmbH HPL-ED2014 V2.13 EN 5/5
© Copyright 2024 ExpyDoc
