Jazz Data Sheet

page 1 of 2
DATA SHEET
Effective August 1, 2014
Product Overview
Jazz is an innovative rubber flooring that replaces the traditional vinyl type flooring in commercial and domestic
applications. It offers great underfoot comfort, absorbs walking noise, has excellent non-slip properties and it
comes in a range of 12 standard colours, with custom colours available to suit any interior design. Depending
on the colour blend, Jazz products are made in a range of compositions from 100% synthetic to 100%
recycled product. Jazz flooring is impervious once sealed with A1 Rubber approved sealer.
Jazz flooring is an environmentally conscious flooring option for designers and specifiers which is available in a
range of thicknesses from 1.5mm to 8mm.
Specifications
Roll Width 1.1m
Thicknesses
Any length*, minimum 5L/m.
For maximum roll lengths refer to
Roll Length Approximate Log Yield Table.
*Specified roll lengths cannot be guaranteed
due to the nature of raw materials used in
manufacturing.
Slip Resistance Wet Pendulum - Class V
(AS/NZ 4586:2004) Dry Pendulum - Class F
Hardness (Shore A) 50-60 ± 15%
Roll width ± 2%
Roll length ± 4%
Tolerance
Thickness ± 1mm
Density ± 15%
Temperature Range -25°C to 80°C
ΔLw = 16dB, Ln,w + Ci = 61
Impact and Sound
tested at 3mm minimum (EN ISO
Reduction
140-8)
Tensile Strength 1.40N/mm² (ASTM D412)
1.5 - 2.5mm (Light - Mid uses)
3.0 - 8.0mm (All uses)
VOC Emissions
Total Volatile Organic Compound
Certification
emission rate 0.2mg/m²/hr (24
Office Design IEQ-13
hours)
Office Interiors IEQ-11
Jazz | Adagio (401), Grandioso (402), Triad (403), Baroque (404)
Material EPDM
Composition 100% EPDM
Density 1570kg/m³
CRF Fire Rating 3-5mm 10.8 kw/m² (AS ISO 2030-1)
Jazz | Fugue (405)
Material
Polymerically bound recycled rubber and
EPDM
Composition 70% EPDM and 30% recycled rubber
CRF Fire
3-5mm 9.8 kw/m² (AS ISO 2030-1)
Rating
Density 1400kg/m³
Jazz | Requiem (406)
Material
Polymerically bound recycled rubber and
EPDM
Density 1300kg/m³
www.a1rubber.com
QLD
p (07) 3807 3666
f (07) 3807 2344
e [email protected]
34 Binary St, Yatala, 4207
Composition 50% EPDM and 50% recycled rubber
CRF Fire
3-5mm 9.8 kw/m² (AS ISO 2030-1)
Rating
NSW
p (02) 9756 2146
f (02) 9756 2149
e [email protected]
40 Bentley St, Wetherill Park, 2164
VIC
p 0408 607 888
f (07) 3807 2344
e [email protected]
16-24 Berends Dr, Dandenong S, 3157
page 2 of 2
DATA SHEET
Effective December 1, 2013
Jazz | Cadenza (407), Largo (408), Stretto (409)
Material
Polymerically bound recycled rubber and
EPDM
Composition 25% EPDM and 75% recycled rubber
CRF Fire 3-7mm 3.6 kw/m²
Rating 8-10mm 3.5 kw/m² (BSEN 13238-2001)
Density 1160kg/m³
Jazz | Partita (411), Mezzo (412)
Material
Polymerically bound recycled rubber and
EPDM
Composition 10% EPDM and 90% recycled rubber
CRF Fire 3-7mm 3.6 kw/m²
Rating 8-10mm 3.5 kw/m² (BSEN 13238-2001)
Density 1150kg/m³
Jazz | Antiquecork (410)
Material
Polymerically bound recycled rubber and
recycled wine cork
Composition 20% cork and 80% recycled rubber
CRF Fire 3-7mm 3.6 kw/m²
Rating 8-10mm 3.5 kw/m² (BSEN 13238-2001)
Density 1000kg/m³
Specifications for custom Jazz logs designed with Jazz Composer vary with log composition,
and are available on application. Please contact A1 Rubber for further information.
Approximate Log Yield
Thickness
L/M Yield
Sqm Yield
Thickness
L/M Yield
Sqm Yield
1.5mm
326 l/m
358 m
2
5mm
96 l/m
105 m2
2.0mm
240 l/m
264 m2
6mm
79 l/m
87 m2
2.5mm
192 l/m
211 m2
7mm
67 l/m
73 m2
3mm
163 l/m
179 m2
8mm
58 l/m
64 m2
4mm
120 l/m
132 m2
Applications
All Jazz floors are monolithic in construction without veneers or laminates and are quick and easy to install.
Jazz floors are suitable for many different flooring applications, such as retail shops, walkways, gyms, sports
centres, offices, schools, night clubs and rumpus rooms. When using Jazz flooring around a swimming pool,
only 100% EPDM colour can be used. Consult your supplier for the correct thickness and Jazz floor type to
suit each application.
Disclaimer
The above information is derived from periodic tests taken on actual product from the manufacturing process. Some variances in specifications and raw surface appearances are possible due to the use of
recycled materials and our manufacturing tolerances. In practice, the difference in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The
recommendation relating to the application and end use of A1 Rubbers products, are given in good faith, based on A1 Rubbers current knowledge and experience of the product when properly stored,
handled and applied under normal conditions in accordance with A1 Rubbers recommendations. The user of the product must test the product’s suitability for intended application and purpose. A1 Rubber
reserves the right to change the properties and tolerances of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current Terms and Conditions of
Sales and delivery. Users must refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.
Document No. JAZZAUG14DATA
www.a1rubber.com
QLD
p (07) 3807 3666
f (07) 3807 2344
e [email protected]
34 Binary St, Yatala, 4207
NSW
p (02) 9756 2146
f (02) 9756 2149
e [email protected]
40 Bentley St, Wetherill Park, 2164
VIC
p 0408 607 888
f (07) 3807 2344
e [email protected]
16-24 Berends Dr, Dandenong S, 3157

Download Report