Sheet Steel Industrial Light Fittings Series 3070

Sheet Steel Industrial Light Fittings
Series 3070
Application:
Industrial halls, warehouses, chemical
workshops, cold stores, covered areas
such as entrances, filling stations, bus
stations etc.
Design:
Housing: Light grey (RAL 7035) powder
coated sheet steel, or alternatively in
stainless steel. Complete with control
gear and internally wired.
Glass: Hinged, detachable toughened
safety glass without frame.
Central locking system: Positioned on
opposite side to the hinges and operated
by a 5mm Allen key.
HIT-CE Elite system
Technical data:
3070... CE EVG
Control gear: Electronic
Mains voltage: 220 – 240V/AC
Reflector: Anodized mirror finish pure
aluminium.
Electrical Connection: Terminal block 3 x
4mm² in covered side compartment of
the housing.
Cable entry: 1 plastic gland M25 x 1.5
and 1 plastic blanking plug M25 x 1.5 on
the short side.
Mounting system: Angle brackets on the
sides for direct ceiling mounting (4 holes
9mm Ø) or suspension by means of
chains or steel ropes with snap-hooks.
Ambient temperature: +30°C max.
3070 ...DIM D
Control gear: Electronic
Mains voltage: 220 – 240V/AC
Range of dimming: 100% to 50%
(lamp output)
Interface: DALI
Simple quick connection and lamp change
with the comfortable central lokking system.
• robust industrial design for reliable long-term service
- high-grade powder coating for good corrosion resistance
- toughened safety glass 5mm thick
- sturdy central locking system with internal hinge
- highly efficient mirror system for high luminance intensities and reduced numbers of light fittings
• easy installation and maintenance
- universal angle brackets for direct ceiling mounting or suspended mounting to chains
or steel ropes
- time-saving connection and lamp replacement thanks to the original
SCHUCH central locking system
- spacious lamp and gear compartment directly accessible
- standard version suitable for operation in ambient temperatures/cold
stores to -30°C
• shock tested: RK 1,6/16A
•
optional: ball-game safe, tested and certified according to DIN VDE 710 Part 13/05.81
Advantages of the energy saving ceramic burner lamps PHILIPS MASTER COLOUR ELITE
compared with quartz burner lamp systems:
• up to 25% energy cost saving through reduced connection power
• further 40% energy cost saving in the dimmer mode with 50% luminous flux
• 66% maintenance cost saving by three times longer period of application of the ELITE
lamp
• additionally improved operating efficiency of the luminaire through compact burner
shape and mechanically precize lampholder system
55%
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
159
Produkt-Katalog 2014-15
Industrieleuchten
Industrial
Light Fittings
SCHUCH quality - your advantage
IP65
3070…
high bay light fittings
Type
HIT-CE
HIE
HSE
HIT
HST
HIT-DE HST-DE
3070/..
3070/315 CE EVG
Article no.
Lamps
W
Weight
ca. kg 8)
for high pressure discharge lamps, lamp holder E40
3070/400 HI 4)
30700 0007 1)
1 x HIT/HIE 400 2)
3070/400 HS 4)
30700 0011 1)
1 x HST/HSE 400
1 x HIT/HIE 400 3)
3070/250 CE 6)
30700 0053 1)
1 x HIT-CE 250
1 x HIT/HIE/HST/HSE 250
3070/210 CE EVG 7)
30700 0055
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
3070/210 CE DIMD 7)
30700 0056
30700 0057
1 x HIT-CE ELITE 315 5)
3070/315 CE EVG 7)
for high pressure discharge lamps, lamp holder Fc2
3070/250 HI-TS 4)
30700 0013 1)
1 x HIT-DE 250
30700 0015 1)
1 x HIT-DE 400 2)
3070/400 HI-TS 4)
3070/250 HS-TS 4)
30700 0017 1)
1 x HST-DE 250
3070/400 HS-TS 4)
30700 0019 1)
1 x HST-DE 400
1) Uncomp., article no. for comp. see price list.
2) If metal halide lamp to be used is suitable
for operating with HS ballast please select
HS light fitting for higher luminous flux
3) HI lamps with high luminous flux which are
suitable for operating with HS (sv) choke
(such as OSRAM HQI-E 400D, HQI-E/P 400/D,
PHILIPS HPI Plus 400 HOR) or equal.
4) In case of use of ignitors with timer (please
16,7
16,7
15,1
13,8
13,8
14,7
15,1
16,7
15,1
16,7
contact us)
5) PHILIPS Master Colour CDM-T ELITE
6) Includes ignitor with timer.
7) For lamps without burst protection
8) Weights without packing material.
3070/.. TS
IP65
3070… D
for locations with increased fire risk
HIT-CE
HIE
HSE
HIT
HST
Application:
Halls with increased fire risk due to deposits of combustible dusts and fibres
Type
Article no.1)
HIT-DE HST-DE
e.g. as stipulated in VDE0100 Part 482
Lamps
W
Weight
ca. kg 4)
for high pressure discharge lamps, lamp holder E40 or Fc2
3070…FF
3070/250 CE D 3)
30702 0011
3070/250 HI-TS D 2)
3070/250 HS-TS D 2)
30702 0005
30702 0007
1) Uncomp., article no. for comp. see price list
2) In case of use of ignitors with timer (please
contact us)
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
160
1 x HIT-CE 250
1 x HIT/HIE/HST/HSE 250
1 x HIT-DE 250
1 x HST-DE 250
15,1
15,1
15,1
3) Includes ignitor with timer.
4) Weights without packing material.
Produkt-Katalog 2014-15
26.05.2014
Advantages of the ENDURA
Induction-type lamp system:
IP65
3070… ENDURA
with induction lamp system ENDURA
• Ideal for difficult to reach areas or with long
maintenance periods
• Extremely long working life (up to 60.000
hours, see manufacturers data)
• flicker-free, instant start < 0.1 sec., suitable for
emergency applications
• instant restart (observe the start-up behaviour)
• constant high luminous flux (12 000lm) over a
wide range of mains voltage, suitable for DC
• wide supply voltage range 120-240V AC
• low ignition temperature and constant high luminous flux over a wide temperature range up
to -40°C.
• good colour reproduction / rendering
• lamp can be mounted at any angle; when
mounted vertical or inclined, connection to face
downwards
• maintenance-free
LMT
3070/150 ENDURA
Application:
In difficult to reach places where a lamp replacement would be time consuming and
quite costly or if generally long maintenance intervals are wanted for cost saving.
For cold storage or refrigerated rooms for
Type
Article no.
temperatures down to -30°C or -40°C, or
covered areas generally outdoors.
Design:
As 3070…- but with electronic operating
system (EVG) and with induction-type
lamp.
Lamps
W
Weight
ca. kg
with induction lamp and EVG
3070/150 ENDURA
30700 0023
1 x LMT 150
12,5
Note:
A modified version of Type
3070/150 ENDURA is available
for deep temperature applications down to -30°C/-40°C upon
request. (Observe the start-up
behaviour)
IP65
3070… SA
with asymmetrical reflector system
Application:
Lighting applications with limited backward radiation e.g. assembly shops, assembly lines, loading platforms etc.
Type
Article no.1)
HIT-DE HST-DE
1) Uncomp., article no. for comp. see price list
2) For Osram HQI-TS 400 or equivalent
If metal halide lamp to be used is suitable
for operating with HS ballast please select
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
Lamps
W
for high pressure discharge lamps with socket Fc2
3070/250 HI-TS SA 3)
30700 0045
1 x HIT-DE 250
3070/400 HI-TS SA 3)
30700 0047
1 x HIT-DE 4002)
3070/250 HS-TS SA 3)
30700 0049
1 x HST-DE 250
3070/400 HS-TS SA 3)
30700 0051
1 x HST-DE 400
3070/250 HI-TS SA
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Design:
As 3070 but with asymmetrical reflector
system made from high anodized pure
aluminium.
161
Weight
ca. kg 4)
15,9
17,4
15,9
17,4
HS light fitting for higher luminous flux
3) In case of the use of ignitor with timer please
contact us.
4) Weights without packing material.
Produkt-Katalog 2014-15
Industrieleuchten
Industrial
Light Fittings
Photo: BASF
IP65
3070… SB
with extreme wide beam reflector for low light point heights
Type
HIT-CE
HIE
HSE
HIT
HST
Article no.
Lamps
W
Weight
ca. kg 8)
for high pressure discharge lamps, lamp holder E40 or PGZ18
3070/400 HI SB 4)
30700 0107 1)
1 x HIT/HIE 400 2)
3070/400 HS SB 4)
30700 0111 1)
1 x HST/HSE 400
1 x HIT/HIE 400 3)
30700 0153 1)
1 x HIT-CE 250
3070/250 CE SB 6)
1 x HIT/HIE/HST/HSE 250
1 x HIT-CE ELITE 210 5)
3070/210 CE SB EVG 7)
30700 0155
1 x HIT-CE ELITE 210 5)
3070/210 CE SB DIMD 7)
30700 0156
30700 0157
1 x HIT-CE ELITE 315 5)
3070/315 CE SB EVG 7)
HIT-DE HST-DE
3070/... SB
for high pressure discharge lamps, lamp holder Fc2
3070/250 HI-TS SB 4)
30700 0113 1)
1 x HIT-DE 250
3070/400 HI-TS SB 4)
30700 0115 1)
1 x HIT-DE 400 2)
3070/250 HS-TS SB 4)
30700 0117 1)
1 x HST-DE 250
3070/400 HS-TS SB 4)
30700 0119 1)
1 x HST-DE 400
16,7
16,7
16,7
15,1
13,8
13,8
14,7
15,1
14,8
13,2
14,8
1) - 8) See Standard-Version series 3070/...
IP65
3070… SSK
for sand/glass blasting areas and cabins
HIE
Application:
Rooms and cabins where sand and glass
pearl etc. are used for the treatment of
goods.
HSE
Type
HST
Note: The light fittings are designed for mounting
to the ceiling of sand blasting areas.
For applications where the light fittings are installed at a lower height, e.g. on the walls and/or
where the fittings are continuously exposed to
grit additional protective measures must be taken.
Please contact us.
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
Design:
As 3070 but with easy to replace polycarbonate protective cover instead of safety
glass window.
Article no.1)
Lamps
W
HST-DE
Weight
ca. kg4)
for high pressure lamps, lamp holder E40
3070/250 HI/HS SSK 2)
3070/... SSK
30703 0003 1)
1 x HIE-P/HST/HSE 250 3)
16,0
1 x HST-DE 250
16,0
for high pressure lamps with sockets Fc2
3070/250 HS-TS SSK 2)
30703 0007 1)
1) Uncomp., article no. for comp. see price list
(400 W upon request)
2) In case of the use of ignitor with timer please
contact us.
162
3) When using HIE lamps only use lamps with
plastic protective covering (e.g. OSRAM HQIE/P..250)
4) Weights without packing material
Produkt-Katalog 2014-15
IP65
3070... Z
for areas with high levels of dirt and dust deposits
retrofi
t possib
Application:
Areas with high dust and dirt deposit e.g.
in the pulp and paper industries, brick, limestone and cement industries, plaster
storage, refuge depots, rubbish sorting
and thermal handling installations etc.
le!
Design:
Same as 3070... but including selfcleaning particle filter for pressure equalisation as well as with white painted sheet
steel dust protection ring for protecting
the light exit surface from dust deposits.
Advantages of the air flow system with particle filter:
•
good pressure equalisation due to the built-in particle filter (allowing the light fitting to breath
freely when switching on/off)
self cleaning particle filter to ensure protection
against deposits of dust and dirt inside the light
fitting
air flow system for reduction/prevention of contamination of the outer light exit surfaces (i.e.
avoidance of reduction of the illumination caused by
any contamination)
•
•
Type
HIE
pressure
air cushion
equalisation
Article no. 1)
HSE
dust particles
Lamps
W
Weight
ca. kg 4)
for high pressure discharge lamps, lamp holder E40 or PGZ18
HIT-CE
HIT
HST
HIT-DE HST-DE
3070/250 HI/HS Z
3070/400 HI Z 4)
3070/400 HS Z 4)
30705 0007 1)
30705 0009 1)
3070/250 CE Z 6) 7)
30705 0019 1)
3070/210 CE Z EVG 7)
3070/210 CE Z DIMD 7)
3070/315 CE Z EVG 7)
30705 0021
30705 0022
30705 0023
1 x HIT/HIE 400 2)
1 x HST/HSE 400
1 x HIT/HIE 400 3)
1 x HIT-CE 250
1 x HIT/HIE/HST/HSE 250
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 315 5)
19,0
19,0
17,4
16,1
16,1
17,0
3070/250 HI-TS Z 5)
3070/400 HI-TS Z 5)
3070/250 HS-TS Z 5)
3070/400 HS-TS Z 5)
3070/315 CE Z EVG
30705 0011 1)
30705 0013 1)
30705 0015 1)
30705 0017 1)
for locations
with increased fire risk
3070/250 CE D Z 4)
30705 1) 0117
3070/250 HI-TS D Z 4)
3070/250 HS-TS D Z 4)
30705 0111 1)
30705 0115 1)
1 x HIT-DE 250
1 x HIT-DE 400 3)
1 x HST-DE 250
1 x HST-DE 400
17,4
19,0
17,4
19,0
IP65
1 x HIT-CE 250
1 x HIT/HST/HIE/HSE 250
1 x HIT-DE 250
1 x HST-DE 250
17,4
17,4
17,4
1) -8) See standard-version 3070/...
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
163
Produkt-Katalog 2014-15
Industrieleuchten
Industrial
Light Fittings
for high pressure discharge lamps, lamp holder Fc2
IP65
3070... IFS
for applications in food industry areas
Application:
Production halls in the food industry, locatiard
S-Stand
ons which come under the requirements of
IF
e
th
with
ordance
the IFS (International Food Standard) e.g.
• in acc
le
ib
manufacture of food packaging, rooms
fit poss
o
tr
re
•
with higher ambient temperatures etc.
Design:
Same as the standard version but with
additional hinged and detachable UV
protective painted Polycarbonate bowl in
"Sandwich"-design.
Advantages of the "Sandwich"-design:
•
•
•
•
•
•
•
plain walled enclosure designed to avoid surface dust accumulation and without any external
closure parts
additional PC cover eliminates the risk of glass splinter falling down (shatter protection)
polycarbonate glass bowl with additional UV protective paint finish
no special lamps with plastic protective coating required
special paint finish for protection against aggressive cleaning agents and disinfectants available upon
request.
fulfils the requirements of IFS (International Food Standard) for lighting in areas of risk in
food manufacture and processing
a FSA certificate confirms the compliance to the IFS and the food hygiene regulations
Type
HIT-CE
HIE
HSE
HIT
HST
HIT-DE HST-DE
3070/400HI IFS
Article no. 1)
for high pressure discharge lamps, lamp holder E40 or PGZ18
3070/400 HI IFS 4)
30707 0007 1)
1 x HIT/HIE 400 2)
3070/400 HS IFS 4)
30707 0009 1)
1 x HST/HSE 400
1 x HIT/HIE 400 3)
3070/250 CE IFS 6)
30707 0019 1)
1 x HIT-CE 250
1 x HIT/HIE/HST/HSE 250
3070/210 CE IFS EVG 7)
30707 0021
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
3070/210 CE IFS DIMD 7)
30707 0022
30707 0023
1 x HIT-CE ELITE 315 5)
3070/315 CE IFS EVG 7)
for high pressure discharge lamps, lamp holder Fc2
3070/250 HI-TS IFS 4)
30707 0011 1)
1 x HIT-DE 250
3070/400 HI-TS IFS 4)
30707 0013 1)
1 x HIT-DE 400 2)
3070/250 HS-TS IFS 4)
30707 0015 1)
1 x HST-DE 250
3070/400 HS-TS IFS 4)
30707 0017 1)
1 x HST-DE 400
1 x HIT-DE 400 3)
3070/315CE IFS
1) Uncomp., art. nos. for comp. see price list
2) If metal halide lamp to be used is suitable for
operating with HS ballast, please select HS
light fitting for higher luminous flux
3) HI lamps with high luminous flux which are
suitable for operating with HS (sv) choke
(such as OSRAM HQI-E 400D, HQI-E/P 400/D,
PHILIPS HPI Plus 400 HOR) or equal.
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
Lamps
W
164
Weight
ca. kg 8)
17,5
17,5
19,0
15,9
14,6
14,6
15,5
15,9
17,5
15,9
17,5
4) In case of use of ignitors with timer (please
contact us)
5) PHILIPS Master Colour CDM-T ELITE
6) Includes ignitor with timer.
7) For lamps without burst protection
8) Weights without packing material
Produkt-Katalog 2014-15
!
Further Series / Versions
-
with emergency light circuit (design …SLS) to bypass ignition time for high pressure lamps
with emergency light lamp holder E27 and separate terminal for the emergency supply
with frame for recessed installation
with painted or glass pearl blasted stainless steel
enclosure
with painted aluminium enclosure
with internal self cleaning particle filter for pressure equalization (AF)
with swivel bracket up to 45° (SWB)
Compact flood light 3070/... with vibration absorbing 3-point suspension and swivel mounting bracket (SD SWB)
Swivel range: ±45° in the longitudinal axis
Compact flood light 3070/... with vibration absorbing suspension (SD)
for application in areas with heavy shocks and vibrations (e.g. turbine halls, forging plants, cranes in industrial halls etc).
vibration absorbing suspension (SD)
Industrieleuchten
Industrial
Light Fittings
vibration absorbing suspension (SD SWB)
– with pipe clamps for mounting on conduit or poles
– with slightly structured safety glass window
– with vibration absorbing suspension mounting (SD
and SD SWB, see photos)
– 400W version for sandblasting cabins
(SSK)
– for higher ambient temperatures
up to +50°C
– for low ambient temperatures <
-30°C
Accessories / Spare Parts
Type
3070/010
3070/011
3070/020 SSK
3070/021 SSK
3070/010 Z
3070/013 Z
3070/012 IFS
3070/022 IFS
3070/023 IFS
AF 02
AF 03
3070 SWB
2560
2572
Article no.
90073 9000
90073 9003
90073 9001
90073 9005
90073 9002
90073 9011
90073 9006
90073 9007
90073 9008
90300 9002
90300 9003
90231 0001
25600 9000
25720 9000
safety glass window for quick release clamps (to March 2005)
safety glass window for central locking system (from April 2005)
polycarbonate protective cover for 3070... SSK (to March 2005)
polycarbonate protective cover for 3070... SSK (from April 2005)
spare safety glass window for 3070.. Z (to March 2005)
spare safety glass window for 3070.. Z for central locking system (from April 2005)
spare safety glass window for IFS version
polycarbonate protective bowl, painted for IFS version
polycarbonate protective bowl and safety glass assembly for IFS version
spare filter for 3070... Z (to June 2005)
spare filter, internal, for 3070... Z (from July 2005)
swivel bracket with mounting accessories
plastic cable gland M25 x 1.5
threaded plastic blanking plug M25 x 1.5
Safety light device
surcharge
incorporated safety light system with 1 x E27 lamp holder, but without lamp
SLS
Vibration absorbing suspension devices
SD 3070
90231 0002
for types without swivelling bracket
vibration absorbing 3-point suspension device for
SD SWB 3070
90231 0003
swivelling mounting bracket
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
165
Produkt-Katalog 2014-15

Download Report