Rotary Sensor. 360 degree, Flat Shaft, IMC

Rotary Sensor. 360 degree, Flat Shaft, IMC
Ø48.00 (Ø1.88”)
Ø38.00 (Ø1.49”)
150.00 (6.00”) nom.
4
1
3
2
16.00
(0.62”)
shaft in electrical middle
4.20 (0.16”)
Introduction
Ø6.0 (Ø0.23”)
The sensor is suitable for measuring parameters such as gear selection, steering angle,
or throttle position.
3.50
(0.13”)
23.00
(0.96”)
14.20
(0.55”)
10.10
(0.40”)
Ø10.0 (Ø0.39”)
This lightweight sensor measures rotational movement. The sensor uses temperature
compensated Hall Effect technology, resulting in excellent resolution and long life.
Two elongated slots are provided for fixing the sensor and allow mechanical adjustments
Ø28.00during installation.
to be made
(Ø1.10”)
with boot
Installation notes
When installing the sensor:
nn Select a position where the sensor will not be in constant contact with water,
fuel or oil.
nn Protect the sensor from excessive vibration.
nn Make sure that the sensor will not be affected by heat soak.
nn Make sure that air can flow over the sensor to keep it below 125°C.
nn Try not to place the sensor near sources of electrical interference. (e.g. ignition
coils, plug leads, ECUs, alternators, and telemetry antennas.)
Product Information 29S-071651-1E
1
Dimensions
Ø48.00 (Ø1.88”)
Ø38.00 (Ø1.49”)
150.00 (6.00”) nom.
4
1
3
2
16.00
(0.62”)
shaft in electrical middle
4.20 (0.16”)
Ø10.0 (Ø0.39”)
3.50
(0.13”)
23.00
(0.96”)
14.20
(0.55”)
10.10
(0.40”)
Ø6.0 (Ø0.23”)
Ø28.00
(Ø1.10”)
with boot
Dimensions in millimetres and (inches)
Connector details
Sensor connector
IMC11-2204X
with #22 pins
6860-201-22278
4
1
3
2
Pin
1
2
3
4
Mating connector
IMC16-2204X
with #22 sockets
6862-201-22278
Description
Supply voltage
Current Consumption
Output voltage range
Resolution
Mechanical travel
Electrical travel
Calibration
Function
No connection
+5V
Signal
Ground
Rotational speed
Operating temperature
range
Weight
Environmental
Calibration information
Displacement
0°
180°
360°
2
Specifications
Output
0.5V
2.5V
4.5V
Product Information 29S-071651-1E
Value
5V DC ±10%
16mA
0.5 to 4.5 VDC
Ratiometric
12 Bit
360°
360°
11.11mV/degree
Ratiometric (nominal)
120 RPM (max.)
–40°C to +125°C
40 grams (approx.)
IP65
Ordering information
Product
Rotary Sensor.
360 degree, Flat Shaft
with IMC connector.
Part number
21A-0176

Download Report