Sierra Nevada Arms Jig Instructions

Sierra Nevada Arms Jig Instructions
Step 1
Assemble Jig
Required Drill Bits
1/8inch
5/32 inch
5/16 inch
3/8 inch
7/16 inch
1/2 inch
Note: only use high speed steel brill bits
Visit www.sierranevadaarms.com to purchase
Step 2
Holes circled in red drill through with 5/32" drill
Hole circled in blue drill through with 3/8" drill
Step 3
Drill 3 holes in red box with 1/8" drill through
Drill 4 holes in blue circle with 1/8" drill to a depth of .775 from top of jig plate
Drill all other holes with 1/8" drill to a depth of 1.375 from top of jig plate
Step 4
Drill purple hole with 1/2" drill to a depth of .650 from the top of the part
Drill2purple
drilltoto
a depth
of .650
from
toptheofpart
the part
Drill
orangehole
holeswith
with 1/2"
1/2" drill
a depth
of 1.250
from
the the
top of
Drill
2
orange
holes
with
1/2"
drill
to
a
depth
of
1.250
from
the
top
Drill 6 pink holes with 7/16" drill to a depth of 1.250 from the top of the part of the part
Drill
with
3/8"7/16"
drill todrill
a depth
1.250of
from
the from
top ofthe
the top
part of the part
Drill66blue
pinkholes
holes
with
to aofdepth
1.250
Drill
3
black
holes
with
5/16"
drill
through
Drill 3 black holes with 5/16" drill through
Drill 6 blue holes with 3/8" drill to a depth of 1.250 from the top of the part
Step 5
Use file to finish slot for trigger
Step 6
Use flie to finish fire control pocket

Download Report