special effect

INDUSTRIE VERNICI ALTO TEVERE s.r.l.
Via Dagnano, 20
52036 Pieve S.Stefano -ARP.IVA IT 01215760511
SPECIAL EFFECT
JK6.ES18, JK6.ES19, JK6.ES20, JK6.ES21, JK6.ES22 , JK6.ES23, JK6.ES24
JK6.JA15, JK6.MP14, JK6.SC12, JK6.SF16
Description
These colours are specifically used for car
tuning and painting items such as motorbikes,
helmets, bike and others.
The tinters "special effect" are already in resin
base coat KJN.1777, then only need a 70-80%
dilution with acrylic thinner.
Not being the pigments with high coverage,
their iridescent effect depending on the color
of the background (usually dark colors offer
best enhance the effect ) see the colour effect
card.
However, is also possible to use other types of
colors, the final result changes, depending on
the type of the background color. We suggest
try a sample before.
Best performance is obtained with application in "TRIPLE LAYER”:
First layer: basecoat RAL 9005 in KJN.1777
Second layer: special effect
Third layer: IVAT Clearcoat KKL series.
INDUSTRIE VERNICI ALTO TEVERE s.r.l.
Via Dagnano, 20
52036 Pieve S.Stefano -ARP.IVA IT 01215760511
MIXING AND DILUITION RATIO
Choose thinner according to the operating temperature
Thinner
10-25 °C
25-30 °C
RDL.F888
RDL.S777
RDL.L666
80
---
>30 °C
-80
--
--80
Spraygun viscosity: Ford Cup 4 at 20°C : 16-17 sec
Pot Life at 20° C: n.a
APPLICATION GUIDE
Spraygun
Gravity feed
Suction feed spray
Nozzle
1,3-1,4
1,4-1,6
Pressure(bar)
2-3
3-4
N° of coats
1+1
1+1
Flash-off at 20°C: 5-7 min
Dust-off at 20° C: 10 min
Drying time at 20° C: 1 hour
Dry microns (min/max): 10-25
Theoretical yield: 5-6 mq/l each lt of ready to use product

Download Report