Data sheet KTZ22.2-51 [m] Head 30 28 26 24 22 20 Eff. 18 47.7% 16 14 12 10 8 6 1 4 2 0 [kW] Shaft power P2 2.4 1 (P2) 2 1.6 1.2 [%] Efficiency 50 40 30 20 1 10 0 0 5 10 15 20 25 [m³/h] CWL: Continuous running water level Specification Shaft seal Electric submersible pump Degree of protection IP 68 Depth of submersion max. 25 m Type of impeller Semi-open Max. solid handling 8.5 mm Suitable for: spring-/rain-/waste-/ground water, water containing sand Double inside mechanical seal in oil bath additional lubrication by oil lifting device Primary seal Silicon carbide on silicon carbide Secondary seal Silicon carbide on silicon carbide Electric motor Bearings Dry-type submersible induction motor Insulation class F 2Poles 2840 1/min Starting mode Directly Rated voltage 400 V 50 Hz 3~ Power uptake 3.15 kW Rated power 2.20 kW Rated current 5A Start current 34.0 A Shielded ball bearings, maintenance-free Materials Impeller Pump casing Suction cover Motor Frame Shaft Cable Chromium Iron HiCrFC FC200 (EN-GJL-200) FCD50 (EN-GJS-500-7) FC150 (EN-GJL-150) Stainless steel SUS420J2 Discharge size 20m H07RN-F 4Cx1,5mm² 2” (50mm) BS-Coupling (threaded flange) Motor Protection Weight Circle thermal protector (snap-action bi-metal device) 34 kg T surumi Europe Gm bH 04.03.2014 V.16 / 1.10.2013 (dry weight of the pump only without cable) Heltorfer Str. 14 * 40472 Düsseldorf * Germany Tel.: +49-211-4179373 [email protected] www.tsurumi.eu Fax: +49-211-4791429 Performance curve KTZ22.2-51 Discharge port Head Flow Rated power Power input Phases Voltages Frequency Rated current Starting current Number of poles Speed Starting mode Insulation class 2" 26.0 m 30.0 m³/h 2.20 kW 3.15 kW 3~ 400 V 50 Hz 5A 34.00 A 2 2840 1/min Directly F [m] 32 Head 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 [kW] 0 Shaft power P2 2.8 Eff. 47.7% 1 2.6 2.4 2.2 1 (P2) 2 1.8 1.6 1.4 1.2 [%] 55 Efficiency 50 45 40 35 30 25 20 1 15 10 5 0 0 2 4 6 8 10 12 14 16 18 T surumi Europe Gm bH 04.03.2014 V.16 / 1.10.2013 20 22 24 26 28 30 [m³/h] Heltorfer Str. 14 * 40472 Düsseldorf * Germany Tel.: +49-211-4179373 [email protected] www.tsurumi.eu Fax: +49-211-4791429 Dimensions KTZ22.2-51 CWL: Continuous running water level LWL: Lowest running water level T surumi Europe Gm bH 04.03.2014 V.16 / 1.10.2013 Heltorfer Str. 14 * 40472 Düsseldorf * Germany Tel.: +49-211-4179373 [email protected] www.tsurumi.eu Fax: +49-211-4791429 Sectional drawing KTZ22.2-51 No. Description No. Remark Description Remark 1 Cable H07RN-F 55 Rotor . 20 Pump casing FC200 (EN-GJL-200) 56 Stator . 21 Impeller Chromium Iron HiCrFC 64 Motor Frame FC150 (EN-GJL-150) 22 Suction cov er FCD50 (EN-GJS-500-7) 68 Handle Steelplate and rubber 23 Strainer Steel plate 71 Shaf t protection sleev e Stainless steel SUS304 25 Mechanical seal H-20T 26 Oil seal DD25388 30 Oil distributor Plastic 32 Pressure socket Aluminium alloy casting 35 Oil screw Stainless steel SUS304 36 Lubricant Turbine oil (ISO VG32) 50 Main cov er FC150 (EN-GJL-150) 52A Upper bearing 6204ZZC3 52B Lower bearing 6305ZZC3 53 Motor Protector . 54 Shaf t Stainless steel SUS420J2 T surumi Europe Gm bH 04.03.2014 V.16 / 1.10.2013 Heltorfer Str. 14 * 40472 Düsseldorf * Germany Tel.: +49-211-4179373 [email protected] www.tsurumi.eu Fax: +49-211-4791429
© Copyright 2024 ExpyDoc