TEMPLATE M80-0180-0002TM-14 EL PREP LOCATIONS, STEEL & STAINLESS STEEL HINGES FRAME & DOOR PREP LEFT HAND APPLICATION SHOWN FOR ILLUSTRATION PURPOSES ONLY * DIMENSIONS SHOWN STAND TRUE WHEN TAKING INTO CONSIDERATION THE INDUSTRY STANDARD OF 1/8" CLEARANCE BETWEEN TOP OF DOOR OPENING AND TOP OF DOOR. "A" FROM TOP OF DOOR FOR LH/RHR APPLICATION 13/16" "C" * FROM TOP OF D.O. FOR LH/RHR APPLICATION "B" FROM TOP OF DOOR FOR RH/LHR APPLICATION 3/4" DIA. HOLE ** SEE NOTES 1 5/8" FROM EDGE OF FRAME 1/8" DEEP 1 5/8" FROM PULL SIDE OF DOOR TEMPLATE "D" * FROM TOP OF D.O. FOR RH/LHR APPLICATION 1-1/4" CL 1/8" DEEP 1-1/4" CL BETWEEN EL CLIPS DIM. "A" OR "B" 3" C L 2" DEEP POCKET 7/8" 3" 1-1/4" CL 2" DEEP POCKET 1/4" 1-3/4" VISUAL REPRESENTATION SHOWING DOOR AND FRAME PREP LOCATION DIFFER. FOR ILLUSTRATION PURPOSE ONLY. DIM "C" & "D" 1-1/4" 1/4" McKINNEY Products Company • 225 Episcopal Road • Berlin, CT 06037 • PHONE: 800-346-7707 • FAX: 800-541-1073 Copyright © 2014, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. **NOTES FOR WOOD DOORS & FRAME, ADDITIONAL POCKET IS NEEDED. SEE BELOW EL CLIP M80-0180-0002TM-14 Effective date: July 20, 2014 Supercedes: All Previous 8/26/14 TEMPLATE M80-0180-0002TM-14 ***DIMENSION SHOWN BELOW IS NEEDED*** AT THE TIME OF ORDERING LOCATION ABOVE HINGE CENTER STANDARD LOCATION BELOW HNGE CENTER ABOVE HINGE CENTER STANDARD LOCATION BELOW HNGE CENTER TOP TO CENTER DOOR PREP "A" 21 25/32 20 29/32 22 25/32 22 21/32 21 1/32 25 23/32 24 27/32 26 23/32 26 19/32 24 31/32 29 11/16 28 13/16 30 11/16 30 9/16 28 15/16 33 21/32 32 25/32 34 21/32 34 17/32 32 29/32 37 19/32 36 23/32 38 19/32 38 15/32 36 27/32 41 9/16 40 11/16 42 9/16 42 7/16 40 13/16 45 17/32 44 21/32 46 17/32 46 13/32 44 25/32 49 15/32 48 19/32 50 15/32 50 11/32 48 23/32 TOP TO CENTER DOOR PREP "A" STANDARD LOCATION BELOW HNGE CENTER ABOVE HINGE CENTER STANDARD LOCATION BELOW HNGE CENTER TOP TO CENTER FRAME PREP "D" RH / LHR APPLICATION HINGE LENGTHS 83 3/16" - 85 1/8" TOP TO CENTER DOOR PREP "B" TOP TO CENTER FRAME PREP "D" 21 25/32 22 21/32 21 1/32 22 21/32 21 1/32 27 23/32 26 27/32 28 23/32 26 27/32 28 23/32 33 21/32 34 17/32 32 29/32 34 17/32 32 29/32 39 19/32 38 23/32 40 19/32 38 23/32 40 19/32 45 17/32 46 13/32 44 25/32 46 13/32 44 25/32 51 15/32 50 19/32 52 15/32 50 19/32 52 15/32 57 13/32 58 9/32 56 21/32 58 9/32 56 21/32 63 11/32 62 15/32 64 11/32 62 15/32 64 11/32 LH / RHR APPLICATION RH / LHR APPLICATION HINGE LENGTHS 85 3/16" - 95" HINGE LENGTHS 85 3/16" - 95" TOP TO CENTER BETWEEN EL CLIPS TOP TO CENTER DOOR PREP "A" TOP TO CENTER FRAME PREP "C" TOP TO CENTER DOOR PREP "B" TOP TO CENTER FRAME PREP "D" 27 23/32 28 19/32 26 31/32 26 27/32 28 23/32 31 21/32 32 17/32 30 29/32 30 25/32 32 21/32 35 5/8 36 1/2 34 7/8 34 3/4 36 5/8 39 19/32 40 15/32 38 27/32 38 23/32 40 19/32 43 17/32 44 13/32 42 25/32 42 21/32 44 17/32 47 1/2 48 3/8 46 3/4 46 5/8 48 1/2 51 15/32 52 11/32 50 23/32 50 19/32 52 15/32 55 13/32 56 9/32 54 21/32 54 17/32 56 13/32 59 3/8 60 1/4 58 5/8 58 1/2 60 3/8 63 11/32 64 7/32 62 19/32 62 15/32 64 11/32 ***DIMENSION SHOWN BELOW IS NEEDED*** AT THE TIME OF ORDERING LOCATION TOP TO CENTER FRAME PREP "C" TOP TO CENTER DOOR PREP "B" LH / RHR APPLICATION HINGE LENGTHS 95 1/16" - 118 3/4" TOP TO CENTER BETWEEN EL CLIPS TOP TO CENTER DOOR PREP "A" 39 19/32 43 17/32 47 1/2 51 15/32 55 13/32 59 3/8 63 11/32 67 9/32 71 1/4 75 7/32 79 5/32 40 15/32 44 13/32 48 3/8 52 11/32 56 9/32 60 1/4 64 7/32 68 5/32 72 1/8 76 3/32 80 1/32 TOP TO CENTER FRAME PREP "C" 38 27/32 42 25/32 46 3/4 50 23/32 54 21/32 58 5/8 62 19/32 66 17/32 70 1/2 74 15/32 78 13/32 RH / LHR APPLICATION HINGE LENGTHS 95 1/16" - 118 3/4" TOP TO CENTER DOOR PREP "B" 38 23/32 42 21/32 46 5/8 50 19/32 54 17/32 58 1/2 62 15/32 66 13/32 70 3/8 74 11/32 78 9/32 TOP TO CENTER FRAME PREP "D" 40 19/32 44 17/32 48 1/2 52 15/32 56 13/32 60 3/8 64 11/32 68 9/32 72 1/4 76 7/32 80 5/32 McKINNEY Products Company • 225 Episcopal Road • Berlin, CT 06037 • PHONE: 800-346-7707 • FAX: 800-541-1073 Copyright © 2014, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. ABOVE HINGE CENTER TOP TO CENTER FRAME PREP "C" LH / RHR APPLICATION HINGE LENGTHS 83 3/16" - 85 1/8" TOP TO CENTER BETWEEN EL CLIPS ***DIMENSION SHOWN BELOW IS NEEDED*** AT THE TIME OF ORDERING LOCATION RH / LHR APPLICATION HINGE LENGTHS UP TO 83 1/8" TOP TO CENTER BETWEEN EL CLIPS ***DIMENSION SHOWN BELOW IS NEEDED*** AT THE TIME OF ORDERING LOCATION LH / RHR APPLICATION HINGE LENGTHS UP TO 83 1/8" TEMPLATE EL PREP LOCATIONS, STEEL & STAINLESS STEEL HINGES (CONTINUED) M80-0180-0002TM-14 Effective date: July 20, 2014 Supercedes: All Previous 8/26/14
© Copyright 2025 ExpyDoc
