Disc milling cutters

Disc milling cutters
335.15... First choice for circlip and narrow grooves
ap .063-.203 inch
Grooving
Cylindrical: 1.00 and 1.25 in
Product pages:
Insert pages:
Cutting data:
212
539
242
B type: 2.50 in
Insert designation:
R335.15-13...
R335.15-18...
Basic choice for grooving.
From dia 1.00-2.50 in
2 cutting edges per insert.
ap = .063-.203 in
Edge form: Chamfer
335.10... First choice for cutting off and narrow grooves
ap .089-.157 inch
Grooving
Cut-off
Slotting
Cylindrical: 2.50-3.00 in
A type: 3.00-12.00 in
B type: 2.50-6.00 in
Product pages:
Insert pages:
Cutting data:
Add. information:
213-215
569
243
216-217
Insert designation:
150.10...
Basic choice for grooving,
cut-off, full side and face.
From dia 2.50-12.00 in
1 cutting edges per insert.
ap = .089-.157 in
Edge form: Radius
208
206-211 Disc Tech.indd 208
8/23/2012 9:40:53 AM
Disc milling cutters
335.19... First choice for slotting up to .500 wide
Grooving
ap .156-.500 inch
Slotting
Cut-off
Type B Ø
2.50-6.00 in
Combimaster Ø
1.50 and 2.00 in
Cylindrical Ø
2.00/2.50/3.00 in
Type A Ø
2.50-10.00 in
335.335.19 cutter with SNHQ inserts
For full side and face use left and right hand inserts
For half side and face use only left or right hand inserts
Product pages:
Insert pages:
Cutting data:
Add. information:
218-219
553-556, 569
244
221
Insert designation:
SNHQ inserts are the first choice.
335.19 inserts are an alternative.
335.18/335.29 Equipped with cassettes for round inserts
Full radius
Combimaster Ø
1.50-2.00 in Fixed pocket
Product pages:
Insert pages:
Cutting data:
Add. information:
Half radius
B Type Ø 2.50-3.00 in
Fixed pocket
223-225, 235, 239
540, 542-543
246-253
241-241
Insert designation:
RD..06T1M0
RD..0803M0
RD..10T3M0
RP..1204M0
RP..1605
A Type Ø 4.00-12.00 in
Adjustable
Basic choice for grooving, cut-off,
full side and face.
Can be used for full and half radius
profile with radii inserts.
From dia 2.00-10.00 in
2 or 4 cutting edges per insert
depending on radii.
ap = .156-.500 in
Edge form: Chamfer
Corner radii .008-.236 in
Full radius .118-.236 in
ap .236-.709 inch
Grooving
B Type Ø 3.00-12.00 in
Adjustable
Basic choice for full radius profiling,
half radius profiling and grooving.
From dia 1.50-12.00 in
ap = .236-.709 in
Edge form: Full radius .118-.315 in
209
206-211 Disc Tech.indd 209
8/23/2012 9:40:56 AM
Disc milling cutters
335.18 LNK Fixed pocket – First choice for fixed width slotting
Slotting
Half side and face
Grooving
A Type Ø 3.00-6.00 in
Fixed pocket
Cylindrical
Ø 1.25-3.00 in
Combimaster
Ø 2.00 in
Product pages:
Insert pages:
Cutting data:
Add. information:
ap .312-.750 inch
226-227
532-533
245
240-241
Basic choice for full side,
face and grooving
From dia 1.25-6.00 in
1 to 4 cutting edges per insert
depending on radii.
ap = .312-.750 in
Edge form: Corner radii .016-.157 in
Insert designation:
LNK..05..
LNK..06..
LNK..08..
335.18 LNK/335.18/AC..15/AP..16 Adjustable – First choice LNK type
Slotting
Product pages:
Insert pages:
Cutting data:
Add. information:
ap .394-1.20 inch
Half side and face
Grooving
A Type Ø 4.00-12.00 in
Adjustable
228, 230-234, 236-238
528-530, 532-533, 573-574
245, 254-258
240-241
B Type: Ø 2.50-6.00 in
Fixed pocket
B Type Ø 3.00-12.00 in
Adjustable
Insert designation:
LNK..06..
LNK..08..
335.18
AC..15
AP..16
Basic choice for full side, face,
half side and grooving.
From dia 3.00-12.00 in
1 to 4 cutting edges per insert
depending on radii
ap = .394-1.20 in
Edge form: Corner radii .016-.236 in
210
206-211 Disc Tech.indd 210
8/23/2012 9:40:59 AM
Disc milling cutters
335.18: Seco adjustable disc milling cutters
Cartridge family
LNK insert
Round insert
335.18 insert
AC..1506 insert
AP..1604 insert
211
206-211 Disc Tech.indd 211
8/23/2012 9:41:03 AM

Download Report