Download PDF - Azad Corporation

CENTRIFUGAL OH1 PUMPS
The model ND is a singlestage, self venting centrifugal
process pump for chemical,
industrial, and petrochemical
general services.
(read more)
Flows to 1,761gpm (400m³/hr)
-Heads to 492ft (150m)
-Temperature: -58° to 482°F (-50° to
250°C)
CENTRIFUGAL API 610 10TH EDITION OH2 AND ISO 13709 PUMPS
The SMK pump series are
-Flows to 7,000gpm (1600m³/hr)
end-suction, centerline
-Heads to 1200ft (360m)
mounted, radial split,
-Temperature: -238 to 842°F (-150 to
overhung horizontal single and 450°C)
double volute centrifugal
pumps. SMK OH2 Type
pumps are fully API-610 10
edition and ISO 13709
compliant.
(read more)
CENTRIFUGAL API 610 10TH EDITION OH3/OH5 AND ISO 13709 PUMPS
The LMV-801 is a direct drive - Flows to 380 gpm (86 m³/hr)
centrifugal pump in a
- Heads to 720 ft (219 m)
standard OH5 configuration
or OH3 when used with the
bearing box option. The LMV801 is a General Service pump
for the HPI, CPI, Gas, and
Specialty Processing
industries. Available in three
models, the Sundyne Direct
Drive pump lineup is designed
to keep your process up and
running around the clock and
around the globe.
(read more)
w w w . a z a d c o r p o r a t i o n . c o m
Office # 21 & 22, Crown Plaza, Shadman II, North Nazimabad, Karachi, 75850 Pakistan Tel: +92-21-36965482, +92-21-34219730
Email: [email protected]
The LMV-802 is a direct drive
- Flows to 150 gpm (34 m³/hr)
centrifugal pump in a standard
- Heads to 210 ft (64 m)
OH5 configuration or OH3 when
used with the bearing box option.
The LMV-802 is a general service
pump for the HPI, CPI, Gas, and
Specialty Processing industries.
Available in three models, the
Sundyne Direct Drive Pump
lineup is designed to keep your
process up and running around
the clock and around the globe.
(read more)
The LMV-806 is a direct drive
- Flows to 380 gpm (86 m³/hr)
centrifugal pump in a standard
- Heads to 760 ft (232 m)
OH5 configuration or OH3 when
used with the bearing box option.
The LMV-806 is a general service
pump for the HPI, CPI, Gas, and
Specialty Processing industries.
Available in three models, the
Sundyne Direct Drive Pump
lineup is designed to keep your
process up and running around
the clock and around the globe.
(read more)
Sundyne API-610, OH3 Type
Pumps are our standard direct
drive vertical in-line single-stage
overhung pumps equipped with a
separate, rugged bearing box
support. The driver is mounted
directly on the bearing box
support and is flexibly coupled
with the pump.
w w w . a z a d c o r p o r a t i o n . c o m
Office # 21 & 22, Crown Plaza, Shadman II, North Nazimabad, Karachi, 75850 Pakistan Tel: +92-21-36965482, +92-21-34219730
Email: [email protected]
CENTRIFUGAL API 610 10TH EDITION OH6 AND ISO 13709 PUMPS
Sundyne API-610, OH6 Pumps are centrifugal, overhung, close-coupled, high-speed integrally geared type
pumps ideal for critical heavy-duty process applications. The impeller is mounted directly to the gearbox output
shaft. There is no coupling between the gearbox and pump; however, the gearbox is flexibly coupled to its
driver. The pumps may be oriented vertically or horizontally.
The LMV/BMP-311 is a gear
- Flows to 400 gpm (91 m³/hr)
driven centrifugal pump. It is
- Heads to 6,300 ft (1,921 m)
designed to ISO-13709 and API610, 10th edition (OH6) standards
for maximum performance and
reliability. Available in vertical or
base-mounted configurations, this
pump is engineered for
critical high-head, lowflow, heavy-duty services within
the Refining, Chemical,
Petrochemical, Power
Generation, Gas Production, and
Specialty Processing industries.
(read more)
The LMV-313 is a gear driven
- Flows to 1,040 gpm (236 m³/hr)
centrifugal pump. Utilizing our
- Heads to 1,790 ft (546 m)
high-efficiency hydraulic
technology, the LMV-313 is ideal
for services in the Refining,
Chemical, Gas Production, and
Specialty Processing industries.
(read more)
The LMV-322 is a gear driven
- Flows to 230 gpm (52 m³/hr)
centrifugal pump. The LMV-322
- Heads to 3,000 ft (915 m)
is engineered for heavy-duty
services within the HPI, CPI, Gas,
and Specialty Processing
industries.
(read more)
w w w . a z a d c o r p o r a t i o n . c o m
Office # 21 & 22, Crown Plaza, Shadman II, North Nazimabad, Karachi, 75850 Pakistan Tel: +92-21-36965482, +92-21-34219730
Email: [email protected]
The LMV/BMP-331 is a gear
- Flows to 400 gpm (91 m³/hr)
driven centrifugal pump. The
- Heads to 6,300 ft (1,921 m)
LMV/BMP-331 is engineered for
heavy-duty service in the HPI,
CPI, Gas, and Specialty Processing
industries.
(read more)
The LMV-333 is a gear driven,
- Flows to 1,000 gpm (227 m³/hr)
centrifugal pump. This pump is
- Heads to 3,000 ft (915 m)
engineered for heavy-duty services
in the HPI, CPI, Gas, and
Specialty Processing industries.
(read more)
The LMV/BMP-341 is a gear
- Flows to 400 gpm (91 m³/hr)
driven centrifugal pump. This
- Heads to 6,300 ft (1,921 m)
pump is used in the HPI, CPI, Gas,
and Specialty Processing
industries.
(read more)
The LMV-343 is a gear driven
- Flows to 1,000 gpm (227 m³/hr)
centrifugal pump. The LMV-343 is - Heads to 3,000 ft (915 m)
designed for services in the HPI,
CPI, Gas, and Specialty Processing
industries.
(read more)
The LMV-346 is a gear driven
- Flows to 400 gpm (91 m³/hr)
centrifugal pump. This pump is
- Heads to 6,300 ft (1,921 m)
used in the HPI, CPI, Gas, and
Specialty Processing industries.
(read more)
w w w . a z a d c o r p o r a t i o n . c o m
Office # 21 & 22, Crown Plaza, Shadman II, North Nazimabad, Karachi, 75850 Pakistan Tel: +92-21-36965482, +92-21-34219730
Email: [email protected]
CENTRIFUGAL API 610 10TH EDITION BB1 AND ISO 13709 PUMPS
Sundyne API-610, BB1 Model Pumps are centrifugal, between-bearings, 1 and 2 stage, axially split, case type
pumps ideal for critical heavy-duty process applications.
Designed for Heavy API-610,
BB1 applications, the PDH-LH
pump features an axially split case
with a single or double suction
impeller.
(read more)
-Flows to 27,298gpm (6,200m)
-Heads to 525ft (160m)
-Temperatures up to 302°F
(150°C)
CENTRIFUGAL API 610 10TH EDITION BB2 AND ISO 13709 PUMPS
Sundyne Marelli Pumps are centrifugal, between-bearings, 1 and 2 stage, radially split case type pumps ideal for
critical heavy-duty process applications
Radially split one & two stage,
-Flows to 13,209gpm (3,000m³/hr)
centerline mounted, double volute, -Heads to 1,640ft (500m)
between-bearings (BB2)
-Temperatures: -238 to 752°F (centrifugal process pump.
150 to 400°C)
(read more) -Pressures to 1,160psi (80bar)
CENTRIFUGAL API 610 10TH EDITION BB3 AND ISO 13709 PUMPS
Sundyne API-610, BB3 Type Pumps are centrifugal, between-bearings, multistage, axially split case designs
ideal for critical heavy-duty process applications.
The DVMX is a fully
-Flows to 6,604 gpm
compliant API-610 and ISO 13709 (1,500m³/hr)(50 Hz)
multi-stage process pump.
-Heads to 4,920 ft (1,500 m)(50 Hz)
Horizontal, axial split case
running back-to-back impellers in
heavy-duty double volute casings.
(read more)
w w w . a z a d c o r p o r a t i o n . c o m
Office # 21 & 22, Crown Plaza, Shadman II, North Nazimabad, Karachi, 75850 Pakistan Tel: +92-21-36965482, +92-21-34219730
Email: [email protected]
CENTRIFUGAL API 610 10TH EDITION VS1 AND ISO 13709 PUMPS
Sundyne Marelli API-610, Type VS1 Pumps are wet pit, vertically suspended, single-casing diffuser designs with
discharge through the column.
The FG vertical multistage,
-Flows to 13,209gpm (3,000m³/hr)
radially split case, submersible
-Heads to 656ft (200m)
centrifugal process pumps are
-Temperature: -22° to 482°F (-30°
API-610, 10th edition compliant.
to 250°C)
(read more) -Power: 1,341hp (1,000kW)
CENTRIFUGAL API 610 10TH EDITION VS2 AND ISO 13709 PUMPS
Sundyne Marelli API-610, Type VS2 Pumps are wet pit, vertically suspended single-casing volute designs with
discharge through the column.
The FQ model vertical mounted,
-Flows to 44,029gpm (10,000m³/hr)
double suction centrifugal pumps
-Heads to 492ft (150m)
are highly reliable and ideal for
-Temperature: -22° to 482°F (-30°
sump applications.
to 250°C)
(read more)
CENTRIFUGAL API 610 10TH EDITION VS4 AND ISO 13709 PUMPS
The API Pump Type VS4 is a vertically suspended, single-casing volute line-shaft driven sump pump.
The VSMK and VSMKD are API- --Flows to 4,403gpm (1,000m³/hr)
610, 10th edition, VS4
-Heads to 1,100ft (250m)
model pumps for submersible
-Temperature up to 752°F (400°C)
applications.
-Maximum Case Pressure: 580psi
(read more) (40bar)
w w w . a z a d c o r p o r a t i o n . c o m
Office # 21 & 22, Crown Plaza, Shadman II, North Nazimabad, Karachi, 75850 Pakistan Tel: +92-21-36965482, +92-21-34219730
Email: [email protected]
CENTRIFUGAL MULTI-STAGE HIGH-PRESSURE
Sundyne Corporation manufactures a variety of centrifugal multi-stage pumps ideal for most heavy duty process
applications.
The HMP-7000 is a four-stage
- Flows to 1,585 gpm (360 m³/hr)
centrifugal pump. The HMP-7000 - Heads to 15,000 ft (4,570 m)
is for heavy-duty services in the
Fertilizer, HPI, CPI, and Specialty
Processing industries.
(read more)
The HMP-3000 is a two-stage
- Flows to 440 gpm (100 m³/hr)
centrifugal pump. The HMP-3000 - Heads to 10,000 ft (3000 m)
is for heavy-duty services in the
Fertilizer, HPI, CPI, and Specialty
Processing industries.
(read more)
The HMP-5000 is a four-stage
- Flows to 1,000 gpm (227 m³/hr)
centrifugal pump. The HMP-5000 - Heads to 14,500 ft (4,500 m)
is for heavy-duty services in the
Fertilizer, HPI, CPI, and Specialty
Processing industries.
(read more)
w w w . a z a d c o r p o r a t i o n . c o m
Office # 21 & 22, Crown Plaza, Shadman II, North Nazimabad, Karachi, 75850 Pakistan Tel: +92-21-36965482, +92-21-34219730
Email: [email protected]
CENTRIFUGAL SELF-PRIMING PUMPS
Self-Priming pumps from Sundyne Corporation are designed for reliable fluid transfer of liquids ranging from
water to hazardous and toxic substances.
The KP is a self-priming, magnet
- Flows to: 285 GPM (65 m³/hr)
drive centrifugal pump. The KP is - TDH: 150 Ft. (46m)
ideal for most corrosive or acidic
transfer services in the Chemical,
and Specialty Chemical industries.
(read more)
The SPGS is a self-priming
- Flows to 264 usgpm (60 m³/hr)
magnet drive centrifugal pump.
- Heads to 250 ft (76 m)
This pump is perfect for transfer
duty services within the HPI, CPI,
and Specialty Process industries.
(read more)
CENTRIFUGAL LOW FLOW PUMPS
Sundyne Corporation is the leading expert in Low Flow pumping applications. In fact, our design heritage
comes from the type of low flow applications nobody else could, or would typically handle. Sealed or sealless,
direct drive or flexibly coupled, our engineering expertise has evolved over the decades to encompass a wide
range of products to precisely fit your particular service.
The KMLF is a non-metallic,
- Flows to: 40 GPM (9 m³/hr)
magnet drive centrifugal pump.
- TDH: 170 Ft. (52m)
The KMLF is ideal for Low
Flow corrosive or acidic
applications in the Chemical,
Specialty Chemical, and Steel
industries.
(read more)
w w w . a z a d c o r p o r a t i o n . c o m
Office # 21 & 22, Crown Plaza, Shadman II, North Nazimabad, Karachi, 75850 Pakistan Tel: +92-21-36965482, +92-21-34219730
Email: [email protected]
The P-1500 is a gear driven
- Flows to 33 gpm (7.5 m³/hr)
centrifugal pump. For general
- Heads to 1,300 ft (396 m)
industry and non-API services, the
P-1500 is built strong to stay up
and running.
(read more)
The P-2500 is a gear driven
- Flows to 180 gpm (41 m³/hr)
centrifugal pump. Used in general - Heads to 2,600 ft (792 m)
industry and non-API services,
Sunflo pumps are in continuous
service worldwide.
(read more)
The P-3000 pump is a gear driven,
centrifugal pump. The P-3000 is
ideal for high-pressure general
industry, non-API applications.
- Flows to 500 gpm (114 m³/hr)
- Heads to 4,200 ft (1,280 m)
CENTRIFUGAL HIGH HEAD, LOW FLOW PUMPS
Sundyne wrote the book on High-Head, Low-Flow pumps over 50 years ago and everyone else has been playing
catch up ever since. Originally engineered for use in passenger jet engines during the boost phase of the flight,
our centrifugal pumps are designed to be highly reliable to keep you up and running. Sundyne Pump models are
available in single and multi-stage configurations with small, compact footprints.
This is a base-mounted gear
- Flows to 1,100 gpm (250 m³/hr)
driven centrifugal pump. The
- Heads to 2,800 ft (854 m)
BMP-338 is desinged for heavyduty services in the HPI, CPI, Gas,
and Specialty Processing
industries.
(read more)
w w w . a z a d c o r p o r a t i o n . c o m
Office # 21 & 22, Crown Plaza, Shadman II, North Nazimabad, Karachi, 75850 Pakistan Tel: +92-21-36965482, +92-21-34219730
Email: [email protected]