Spool Type, 3-Way Valve Series DSH083 Catalog HY15-3502/US Technical Information CV DSH083A Check Valves 3-Way Spool Valves. For additional information see Technical Tips on pages SV1-SV6. (2) SH (3) (1) Shuttle Valves General Description Features Load/Motor Controls DSH083A FC (1) Operating Temp. Range/Seals Fluid Compatibility/ Viscosity Filtration Approx. Weight Cavity Form Tool (1) (3) (1) (3) Normally Open (1) Selector LE Logic Elements Normally Closed DSH083A N.O. 11.3 LPM (3.0 GPM) N.C. 7.5 LPM (2.0 GPM) Selector 7.5 LPM (2.0 GPM) DSH083B N.C. 15.0 LPM (4.0 GPM) Selector 15.0 LPM (4.0 GPM) DSH083C N.O. 15.0 LPM (4.0 GPM) DSH083N N.O. 11.3 LPM (3.0 GPM) Selector 15.0 LPM (4.0 GPM) 350 Bar (5000 PSI) (2) DSH083B DC (1) (2) (3) (2) (2) Directional Controls (3) (2) (3) (1) (3) (1) Normally Closed Selector Manual Valves MV 3 160 cc/min. (10 in /min.) at 350 Bar (5000 PSI) DSH083B - 250 cc/min. (15 in3/min.) DSH083N - 250 cc/min. (15 in3/min.) 85% of rated voltage at 20°C (72°F). 50 ms All parts steel. All operating parts hardened steel. -45°C to +93.3°C (“D”-Ring) (-50°F to +200°F) -31.7°C to +121.1°C (Fluorocarbon) (-25°F to +250°F) Mineral-based or synthetic with lubricating properties at viscosities of 45 to 2000 SSU (6 to 420 cSt) ISO Code 16/13, SAE Class 4 or better .13 kg (.28 lbs.) C08-3 (See BC Section for more details) Rougher NFT08-3R Finisher NFT08-3F DSH083C SV Solenoid Valves Minimum Operating Voltage Response Time Cartridge Material PC (2) (1) (2) (3) PV Proportional Valves Maximum Inlet Pressure Leakage at 150 SSU (32 cSt) (3) Pressure Controls (2) Specifications Rated Flow Flow Controls Construction/Symbols (2) (3) (1) CE Normally Open Coils & Electronics • LM DSH083N SV62 (1) BC (2) (3) (2) (2) Bodies & Cavities • • • • • High flow capacity with reduced space requirements Standard valve bodies and common cavities One piece encapsulated coils with minimal amperage draw Manual overrides, seal variations and other options available No dynamic seals Variety of coil terminations Polyurethane “D”-Ring eliminates need for backup rings Nylon inserted jam-nut provides secure holding in high vibration applications All external parts zinc plated TD (3) (1) Normally Open (3) (1) Selector Parker Hannifin Corporation Hydraulic Cartridge Systems Technical Data • • • SpoolType, 3-Way Valve Series DSH083 Catalog HY15-3502/US Technical Information CV Dimensions Millimeters (Inches) Check Valves 39.6 (1.56) 9.7 (.38) SH LM Load/Motor Controls 39.6 (1.56) XXVDC XXW CCX XXX H PAT.XXXXXXX MADEINU.S.A. Shuttle Valves 60.9 (2.40) 62.7 (2.47) 7-10 Nm (5-7 lb. ft.) Torque 19.8 (0.78) 33.8 (1.33) See Super Coil 1/2" I.D. Information For Terminal Connectors 102.6 (4.04) 7/8" Hex. 43-49 Nm (32-36 lb. ft.) Torque FC Flow Controls 11.4 (.45) 3/4-16 UNF-2A Thread (3) PC (2) Pressure Controls (1) Ø 14.2 (.56) 29.7 (1.17) Normal LE Logic Elements THIRD-ANGLE PROJECTION 34.2 (1.35) Shifted Push and Twist M.O. DC Directional Controls MV Manual Valves SV Ordering Information DSH083 08 Size Solenoid Valve Code Style (2) A Solenoid Valves PV Proportional Valves CE Style (3) (1) (2) B (3) (1) Override Option Seals Coil Voltage Coils & Electronics (2) N Diode Body Material Port Size Code Coil Voltage Code Diode Omit None T Push & Twist* (N.C. & N.O.) Omit Without Coil D012 12 VDC Omit None R Diode *Requires Super Coil Code Seals / Kit No. Omit “D”-Ring / (SK08-3) N Nitrile / (SK08-3N) Fluorocarbon / (SK08-3V) D024 24 VDC A120 120/110 VAC, 60/50 Hz A240 240/220 VAC, 60/50 Hz Code Body Material Omit Steel A Aluminum SP* Coil Coil Termination Code Port Size Omit Without Coil Omit Cartridge Only Code Coil Type C D Conduit With Leads DIN Plug Face Omit Without Coil A Amp Jr. Timer† SP* Super Coil - 19 Watts S L Dual Spade† Dual Lead Wire† LS Sealed Lead Wire† H Molded Deutsch† C (3) (1) Coil Termination Code Override Options V (2) Coil Type *Recommended BC (3) (1) Body Part No. 4P 4T 6T 1/4″ NPTF (B08-3-*4P) SAE-4 (B08-3-*4T) SAE-6 (B08-3-*6T) 6B 3/8″ BSPG (B08-3-*6B) * Add “A” for aluminum, omit for steel. Bodies & Cavities *Recommended †DC Only TD Technical Data SV63 Parker Hannifin Corporation Hydraulic Cartridge Systems Spool Type, 3-Way Valve Series DSH083 Catalog HY15-3502/US Performance Curves CV Pressure Drop vs. Flow (Through cartridge only) 1 4 8 11 15 1 2 3 4 PSI 100 Bar 7 80 6 DSH083B 60 4 40 3 20 1 3t 0 LPM 0 GPM o2 or o 2t 1 4 8 11 15 1 2 3 4 Flow (Q) Bar 7 80 6 60 4 DSH083C 40 3 20 1 o1 or o2 1t 3t 0 LPM 0 GPM 4 8 11 15 1 2 3 4 Flow (Q) Pressure Drop vs. Flow (Through cartridge only) 80 Bar 7 6 DSH083N 60 4 40 3 20 1 3 0 LPM 0 GPM to 2 2 to 1 4 8 11 15 1 2 3 4 Flow (Q) Check Valves Shuttle Valves 8 11 15 1 2 3 4 Flow (Q) FC PSI Bar 6000 414 5000 345 Hydraulic Oil 150 SSU @ 100°F (32 cSt) DSH083B PC 4000 276 3 to 2 2 to 3 2 to 1 3000 207 1 to 2 2000 138 1000 LE 69 0 LPM 0 GPM 4 8 11 15 1 2 3 4 Flow (Q) PSI Bar 6000 414 5000 345 Hydraulic Oil 150 SSU @ 100°F (32 cSt) 4000 276 2 to 1 1 to 2 3 to 1 3000 207 SV 1 to 3 2000 138 1000 69 0 LPM 0 GPM SV64 PSI Bar 6000 414 5000 345 DC MV DSH083C 4 8 11 15 1 2 3 4 Flow (Q) Shift Limit Characteristics (Min. Operating Voltage) Hydraulic Oil 150 SSU @ 100°F (32 cSt) Operating Pressure - PSI Pressure Drop ( P) PSI 100 4 Shift Limit Characteristics (Min. Operating Voltage) Hydraulic Oil 150 SSU @ 100°F (32 cSt) Operating Pressure - PSI Pressure Drop ( P) Pressure Drop vs. Flow (Through cartridge only) PSI 100 0 LPM 0 GPM LM Shift Limit Characteristics (Min. Operating Voltage) Hydraulic Oil 150 SSU @ 100°F (32 cSt) Operating Pressure - PSI Pressure Drop ( P) Pressure Drop vs. Flow (Through cartridge only) 69 Flow Controls Flow (Q) 1000 1 to 2 Manual Override Pressure Controls 0 LPM 0 GPM 1 to 3 2000 138 Directional Controls 20 r 1o Manual Valves 3 to 1 to 2 3000 207 Solenoid Valves 3 2 1 to Hydraulic Oil 150 SSU @ 100°F (32 cSt) CE 2 to 1 2 to 3 DSH083N PV Coils & Electronics 40 4 SH 4000 276 4000 276 BC 3000 207 1 to 2 2000 138 Bodies & Cavities 60 2 to 1 3 to 1 DSH083A Load/Motor Controls DSH083A 5000 345 Hydraulic Oil 150 SSU @ 100°F (32 cSt) Logic Elements 6 PSI Bar 6000 414 Proportional Valves Hydraulic Oil 150 SSU @ 100°F (32 cSt) 3 to 2 1000 69 0 LPM 0 GPM 3 to 2 Manual Override 4 8 11 15 TD 1 2 3 4 Technical Data 80 Bar 7 Operating Pressure - PSI Pressure Drop ( P) PSI 100 Shift Limit Characteristics (Min. Operating Voltage) Flow (Q) Parker Hannifin Corporation Hydraulic Cartridge Systems
© Copyright 2024 ExpyDoc
