QNVR – Third party camera compatibility The following cameras have been tested on QNVR. The QVNR will auto detect these models and the AUTO IP set function operates. All the cameras video streams are seen and can be configured to record in normal time lapse modes or Stream Switching using the physical alarm inputs on the rear of the QNVR. Currently there is no 3rd party PTZ control from the QNVR Notes: 1. Stream switching via motion detection is only available when using the Vista VK2 range of cameras. 2. I/O functions have not currently be tested. QNVR Firmware release: RP02 or above. Manufacturer / Model Vivotek FD8131 FD8134 FD8134V FD8135 FD8136 FD8164 FD8164V FD8166 FD8363 SD8362 IP8133 IP8151 IP8332 IP8364 VS8100 ( Encoder) VS8102 ( Encoder) Samsung SND-3080 SND-5080 SNB-6004 SND-6011R SNP-6200 SND-6084R SND-7080 Sony SNC-DH110 SNC-CH120 SNC-CH140 SNC-EM520 Firmware version 0301c 0109a 0202c 0202d 0100f 0101a 0101a 0102a 0103a 0200b 0200a 0305a 0109a 0101a 0100g 0203a V2.42_130107 V3.10_130416 V1.0 V1.11_131011 V1.20_130930 V1.00_130412 V2.10_130416 (@1080P only) QNVR third party camera compatibility Feb 14 _V3.0 V1.80.00 V1.80.00 V1.80.00 V1.77.00 QNVR – Third party camera compatibility Axis M3004 M3006 M3014 M3024-LVE M3203 P3301 P3364 Pelco IM10LW10-1 V5.40.5.4 V5.40.13.2 V5.40.9.2 V5.40.5 V5.40.9.2 V5.11.1 V5.40.17 v1.9.2.11-20131112-1.8270-O1.10251 (H.264 only) This list will be continually upgraded as new models are tested. If the model you require does not appear on the list, please let us know and we will endevaour to test it. QNVR third party camera compatibility Feb 14 _V3.0
© Copyright 2024 ExpyDoc
