POWER CORD
MFH
Contents
B
• Conduit
D
• Coiled Cord Assembly
8.5"
• Power Wire Harness
• Normally Open Low Profile Switch
included with two conductor kits
A
Area must
be open
to mount
power cord
• Hardware for fastening to Mast and
Carriage
C
Figure 1
Figure 2
„
Side
Mast
Maximum
Fork Height 
Number of
conductors &
wire size
OAL
≤ 77"
≤ 77"
78"-83"
78"-83"
84"-93"
84"-93"
94"-101"
94"-101"
102"-120"
102"-120"
≤ 77"
78"-83"
84"-93"
94"-101"
102"-120"
MFH
166"
166"
189"
189"
218"
218"
240"
240"
320"
320"
166"
189"
218"
240"
320"
AWG
2 @ 18 …
2 @ 18 …
2 @ 18 …
2 @ 18 ➅
2 @ 18 …
2 @ 18 …
2 @ 18 …
2 @ 18 …
2 @ 18 …
2 @ 18 …
4 @ 26 ➅
4 @ 26 ➅
4 @ 26 ➅
4 @ 26 ➅
4 @ 26 ➅
5A @ 12V
2A @ 24V-48V
5A @ 12V
2A @ 24V-48V
5A @ 12V
2A @ 24V-48V
5A @ 12V
2A @ 24V-48V
5A @ 12V
2A @ 24V-48V
1A @ 12V
1A @ 12V
1A @ 12V
1A @ 12V
1A @ 12V
 Dual and triple lift mast only, order by MFH and verify "A" dimensions.
For Quad Masts use a Cable Reel see page 14-8.
‚ List Price is $780 when purchased with an attachment or ERC.
ƒ OAL and MFH dimensions are guidelines. Refer to mounting clearance
requirements to verify that Power Cord will fit on mast.
„ Termination point must be attached to a non-sideshifting member of the
mast carriage. If using an integral carriage, special bracketing may be
required.
…Intended use: 2 conductor power transmission to interface with a
Cascade attachment. For generic applications, add a 6819638 list
price $100.
➅ Intended use: low current signal transmission.
➆ UL Claslified, see page vi for explanation.
Mounting
Clearance
Dimensions
Overall
Lowered
Height ƒ
6844331
6844332
6844336
6844337
6844341
6844342
6844346
6844347
6844351
6844352
6844334
6844339
6844344
6844349
6844354
Maximum
Amps @ Volts
Catalog
Order No.➆
Front
A
55.5"
55.5"
61.5"
61.5"
68.5"
68.5"
74.5"
74.5"
87.5"
87.5"
55.5"
61.5"
68.5"
74.5"
87.5"
B
8"
8"
8"
8"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
C
6.5"
6.5"
6.5"
6.5"
4.5"
4.5"
4.5"
4.5"
4.5"
4.5"
4.5"
4.5"
4.5"
4.5"
4.5"
D
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
3.5"
For best performance, the Power Cord must be mounted in the zone
above represented by the dashed lines and as close to the top of the
channels as possible. Please verify that this free area is available on
your lift truck.
Hose reel adaption mounting kit: Figure 1
(Order No: 6839261, list price $240).
Bracket to stack two power cords beside each other: Figure 2
(Order No: 6011619, list price $170)
Not suitable for applications under 35˚ F – NO COLD STORAGE
For Power Cord required for rotational control, see page 5-7.
Cascade Corporation • PO Box 20187 • Portland, OR 97294-0187 • USA • 800 CASCADE (227. 2233) • Tel 503.669.6257 • Fax 800.693.3768 • Fax 503.669.6367
Cascade Canada Ltd. • 5570 Timberlea Blvd. • Mississauga, Ontario L4W 4M6 • Canada • 800.380. 2272 • Tel 905.629.7777 • Fax 905.629.7785
Cascade is a registered trademark of Cascade Corporation.
© Cascade Corporation 2014. All rights reserved.
www.cascorp.com
04/14

Listing of Fellows - The Royal Canadian Geographical Society

Rasenmäher Tondeuse Cortacesped - Walker Vertriebs AG