Download - AxxonSoft

Drivers Pack 3.2.28
Release Notes
17 November AxxonSoft presents version 3.2.28 of the Drivers Pack module
Learn all about Drivers Pack on the product website:
http://www.axxonsoft.com/integrated_security_solutions/supported_ip.php
Drivers Pack 3.2.28 should be used with version 4.9.3 of Intellect and version 3.6.1 of Axxon
Next.
New IP devices integrated




























GBT28181 protocol
3S Vision N3071
3S Vision N3072
3S Vision N4011
3S Vision N5011
3S Vision N9034
3S Vision N9073
3S Vision N9074
AVTech AVM302
AVTech AVM311A
AVTech AVM317A
AVTech AVM359
AVTech AVM417A
AVTech AVM459BH
AVTech AVM561AH
Axis general device (1 ch)
Axis general device (4 ch)
Bosch AUTODOME 800 HD
Bosch AUTODOME Jr 800 HD
Bosch DINION NBN-498-P IVA
Bosch TINYON IP 2000 HD
Bosch TINYON IP 2000
Bosch FLEXIDOME IP micro 2000
Canon VB-H610VE
Certis NVR-9016-08HR Encrypted
Eneo GLD-1401
Infinity TPC-3000AT 3312
LTV LTV-ICDM1-E6231L-V3-10.5
www.axxonsoft.com











































LTV LTV-ICDM1-E6231L-V7-22
LTV LTV-ICDM2-E8231L-F
LTV LTV-ISDNO20-EM2
Probe PIB-H2000ATIR
Probe PMI-H2050F
Probe PIB-H2008HTIR
Probe PRI-H2010
Probe PRI-H2010W
Probe PTI-H2100
Surveon CAM1200
Surveon CAM1201
Surveon CAM1300
Surveon CAM1301
Surveon CAM1320
Surveon CAM2301A
Surveon CAM2311P
Surveon CAM2311
Surveon CAM2331P
Surveon CAM2331
Surveon CAM2441P
Surveon CAM2441
Surveon CAM2511
Surveon CAM3351
Surveon CAM3361
Surveon CAM3371
Surveon CAM3471MP
Surveon CAM3471M
Surveon CAM3471V
Surveon CAM3571M
Surveon CAM4211
Surveon CAM4221
Surveon CAM4311
Surveon CAM4321
Surveon CAM4361
Surveon CAM4371
Surveon CAM4471MP
Surveon CAM4471M
Surveon CAM4471V
Surveon CAM4471VT
Surveon CAM4571M
Surveon CAM6181
Surveon CAM6351
Surveon CAM7511
www.axxonsoft.com





Tattile ANPR Mobile
Tattile Vega Color
Tattile Vega HD
Tattile Vega HD Color
Vivotek IP8165HP (Onvif)
The following enhancements are included in Drivers Pack:
• Multistreaming support for RTSP protocol. To use this feature in SW Axxon Next you should
update Drivers Pack to version 3.2.28. In SW Intellect video streaming option will be available since
Intellect 4.9.4.
• In ONVIF driver was added Override Address setting, which enables / disables the ability to
connect to IP-equipment via dynamic address translation (NAT).
• A General device driver for Axis IP-devices IP-manufacturer. This driver allows client to use the
following features of Axis cameras: video signal receiving for 1- and 4-channel devices, MJPEG,
H264, MPEG codecs support, two-way audio transmission (microphone and speaker), I/O support
(relay, rays), telemetry (PTZ). All settings need to be set upped in device’s web-interface.
Installation
To install Drivers Pack, close the VMS, run the installation file IPDriverPack.msi, complete the
installation and open the VMS.
Please note that, if Drivers Pack 3.2.0 or an earlier version is installed, you should first go to
Windows Control Panel –> Add/Remove Programs and uninstall the earlier version.
Download the installer for Drivers Pack 3.2.28:
http://www.axxonsoft.com/resources/downloads.php
Please refer to http://www.axxonsoft.com/integrated_security_solutions/supported_ip.php to
check what features and firmware versions of integrated IP devices are supported in AxxonSoft.
It is important to note that operation of IP-devices with full version of drivers pack differs for
various Axxon products.
www.axxonsoft.com

Download Report