Declaration of Performance
CONSTRUCTION PRODUCTS REGULATION 2011
DECLARATION OF PERFORMANCE
UK-MR-DOP–S1-001
1.
2
3.
4.
5.
6.
7.
Unique identification code of the product-type:
Martin Roberts AD3, AD9003
Performance Steel Door Set
Type, batch or serial number or any other element allowing identification of the construction product as required under Article 11(4)
of the CPR:
Martin Roberts Type AD3, AD9003 – Double door with area >3.6m2 & Single Doors
Intended use or uses of the construction product, in accordance with the applicable harmonized technical specification, as foreseen
by the manufacturer:
For use on an external pedestrian door set for commercial premises
Name, registered trade name or registered trade mark and contact address of the manufacturer as required under Article 11(5):
Allegion (UK) Ltd, Bescot Crescent
Walsall WS1 4DL
Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article
12(2):
N/A
System or systems of assessment and verification of constancy of performance of the construction product as set out in CPR,
Annex V:
System 1
In case of the declaration of performance concerning a construction product covered by a harmonized standard:
EN 14351-1:2006+A1:2010
Notified Certification body No1121 BS EN ISO 10077-1:2006
8.
European Technical Assessment:
9.
Declared performance
N/A
10.
Essential characteristics
Performance
Height
3021
Dangerous substances
None
Watertightness – Non-shielded (A)
NPD
Watertightness – Shielded (B)
NPD
Resistance to wind load – Test pressure
NPD
Resistance to wind load – Frame Deflection
NPD
Load bearing capacity of safety devices
NPD
Acoustic performance
NPD
Thermal transmittance
1.9 W/(m2.K)
Air permeability
NPD
Ability to release
EN1125,EN1935, EN179
Harmonised technical
specification
EN 14351-1:2006+A1:2010
The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9.
This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by:
Chris Crampton
Director
Allegion (UK) Ltd.
Walsall, WS1 4DL
24th April 2014
Gaurav Arora
Product Manager
Allegion (UK) Ltd.
Walsall, WS1 4DL
24th April 2014

Weekly List of Planning Applications Received

DOP Enertherm ALU 20141007 V13.xlsx

DECLARATION OF PERFORMANCE No. DoP-997 - DIANA-Bad

L/LV/LM/LMV-Series