Swislite Water-base Anti-Rust Paint NPR~03

Swislite Water-base Anti-Rust Paint
NPR~03
Advantages:
 Water based – solvent free, No TOXIC, Superior corrosion resistant
formula.
Quick drying and can be handled within an hour.
Primer for a variety of metals.
Superior anti-rust coating for new or weathered metal
It has good flow and leveling properties, leaving the surface smooth and
ready for paint.
 Good sanding and topcoat inter coat adhesion.
 Non-flammable and environment friendly.
 Suitable for domestic, industrial and automotive uses, including priming
-industrial steel framing, farm implements, tanks, roofs, handrails, windo
and -door frames.




多麗雅納米防銹漆
Swislite Nano Anti-Rust
Paint
Nano performance
Anti-Rust Coating (Metal Primer) NPR-3
Swislite's ECO Series: Anti-Rust Coating NPR-3 (Nano Performance), is a high performance metal primer
and rust treatment engineered with anti-corrosive pigments that prevents the development of rust. It is suitable
for new or weathered metal, NPR-3, Anti-Rust coating stops rust that may have already formed and creates a
highly effective barrier against the formation of new rust.
PRODUCT USES
-Primer for a variety of metals
-Superior anti-rust coating for new or weathered metal
-Suitable for domestic, industrial and automotive uses, including priming of industrial steel framing, farm implements, tanks, roofs, handrails, window and door frames.
ADVANTAGES
-Water based – solvent free, No TOXIC, Superior corrosion resistant formula.
-Quick drying and can be handled within an hour.
-It has good flow and leveling properties, leaving the surface smooth and ready for paint.
-Good sanding and topcoat inter coat adhesion.
-Non-flammable and environment friendly.
TECHNICAL DATA
Composition:
Drying time Surface:
Hard:
Volume solids:
Wet film thickness:
Dry film thickness:
Service temperature:
Application temperature:
Density:
Finish:
Toxicity:
Fire Hazard :
Colors
Pack Size:
Shelf life:
Acrylic resin
1 hour at 25ºC
6 hours at 25ºC
48% to 52%
80 microns per coat
40 microns per coat
-10ºC to 60 ºC
5ºC to 40ºC
1.31 to 1.38g/cm³
Matt
Non Toxic
No
Black, Green, Grey, Red Oxide, White
4 litres, 18 litres.
12 months, Storage Under covers in cool, dry conditions
COVERAGE: 8 - 10m² litre per coat. Applied in a two coat application. Coverage will vary depending on the
porosity of the surface. Recommended wet film thickness of 80 microns per coat giving a dry film thickness of
40 microns per coat.
PREPARATION:Ensure all substrates are thoroughly clean, sound, dry and free from any contaminants such
as dirt, mill scale, salt, algae, grease and excess rust.
NEW METAL: Abrade surface lightly and remove any surface rust or mill scale by sanding, wire brushing,
with a chipping hammer, or sandblasting (sandblasting to SA2½ with a 40 to 50 profile gives the best results)
to a sound metal. Clean away sanding dust, grease and dirt, rinse thoroughly with water until a water breakfree surface is attained and allow drying.
NEW GALVANIZED IRON:
-New galvanized iron is covered with temporary protective oil which needs to be removed.
-Clean away grease and dirt, rinse thoroughly with water until a water break-free surface is attained and allow
drying.
Flat B, 1/F., Wah Fung Building, 296-298 Lockhart Road, Wan Chai, Hong Kong.
Tel: (852) 2787 9878
Fax: (852) 2787 9565
Web site: www.eco-swislite.com E-mail: [email protected]
WEATHERED METAL: -Remove loose, flaking rust and paint by wire brushing, chipping or sandpapering to a
sound metal.Treat inaccessible rust areas, clean away sanding dust, grease and dirt, rinse thoroughly with water,
especially if metal has been exposed to salty air, until a water break-free surface is attained and allow drying.
WEATHERED GALVANIZED IRON: Remove loose, flaking paint and rust by wire brushing, chipping or
sandpapering to a sound metal. Clean away sanding dust, grease and dirt, rinse thoroughly with water until a water breakfree surface is attained and allow drying.
DIRECTION TO USE: Stir NPR-3 Anti-Rust Coating well. Apply using a brush, roller or spray. For spray
application, thin NPR-3 with water by 10% to 15% and mix well. Allow first coat of NPR-3 Anti-Rust Coating to dry for
at least one hour before applying a second coat. For best results always apply two coats.
PROTECT: New or weathered metal or galvanized iron:
Allow NPR-3 Anti-Rust Coating to dry before applying the topcoat (4 hours for an acrylic based topcoat,),
Decorate and protect metal with NPP-8 Metal Topcoat.
CLEANING
Hands and equipment are easily cleaned in water while wet. Collect spills with suitable absorbent material.
Note: Contents subject to change without notice.All technical details are based on laboratory tests and practical experience. Swislite Building
Materials Co., Ltd (SBM) is not liable for improper application of its products. Application procedures should be requested before applying (SBM)
products or systems.
Flat B, 1/F., Wah Fung Building, 296-298 Lockhart Road, Wan Chai, Hong Kong.
Tel: (852) 2787 9878
Fax: (852) 2787 9565
Web site: www.eco-swislite.com E-mail: [email protected]
Nano performance
Swislite ECO Anti-Rust Paint (Nano Grade)
Product
Swislite Water-base
Color & Finish
Grey & Matt
Dry Time Surface(Hrs)
1 hour at 25ºC
Anti-Rust Paint
Coverage:
8-10m²/Kg/Layer
Preparation
Ensure all substrates are thoroughly clean, sound, dry and free from any
contaminants such as dirt, mill scale, salt, algae, grease and excess rust.
Drying time Surface:
Touched 1 hour at 25ºC，Completed cure dry Six Hrs.
Second layer need time:
After one or two hour upon the first layer dry time.
Wet film thickness:
80 Microns per coat
Dry film thickness:
40 Microns per coat
Shelf life:
12 months, Storage Under covers in cool, dry conditions
NPR-03 is Green Environment product (only included nature ingredient), No Hazardous Material,
Less VOC Value < 0.1。
SGS Report: Copper-Accelerated Acetic Acid Salt Spray (CASS) by 24 Hours = 960 days coach days & 8 year
nature expose environments。(BS EN ISO 9227:2012)
‐
‐
‐
By Union Europe "REACH" testing rule，These product ZVHC value < 0.1%.
By "Certitek Testing and Certification" Tested, these product achieved BS EN 13300-2002 Standard.
Hong Kong Fire Service Department signed the "Approval Letter"，these product achieved BS 476:Part 7 Standard.
Flat B, 1/F., Wah Fung Building, 296-298 Lockhart Road, Wan Chai, Hong Kong.
Tel: (852) 2787 9878
Fax: (852) 2787 9565
Web site: www.eco-swislite.com E-mail: [email protected]

Download Report