NTO LABEL GUIDELINES SINCE 1949 SINCE 1972 1/30/14 NTO Label Guidelines – General information The following booklet contains informa�on for Norm Thompson and Sahalie clothing labels. Main labels, size tabs, and care and content labels should be purchased through Nexgen. Contact informa�on is listed below. Hong Kong Unit a 11f Leroy plaza 15 cheung shun street cheung sha wan Office. 852.3551.2600 Fax. 852.2741.9948 [email protected] [email protected] PO-ID labels can be sourced through a vendor of your choice. Refer to artwork for details. If you have any ques�ons, please contact the technical designer or developer responsible for your style. Important Label Standards: * All s�tching should match the main labels unless otherwise specified. * Examples of label placements are standard. Any variances will be called out in the Tech Pack or confirmed by your technical developer. * No Nylon Monofilament thread is to be used. Please note: Label sizes may not be to scale in this document. Content informa�on listed on the CNC labels is for example only. 1/30/14 Page 2 MEN’S LABELS WOMEN’S LABELS fold line fold line fold line fold line SINCE 1949 SINCE 1949 item NT-EF1M [main endfold label] item NT-EF1W [main endfold label] flat dimensions 22mm x 67mm flat dimensions 22mm x 67mm finished dimensions 22mm x 55mm finished dimensions 22mm x 55mm stock woven label stock woven label fold line fold line fold line fold line SINCE 1949 SINCE 1949 item NT-EF2W [main endfold label] item NT-EF2M [main endfold label] flat dimensions 56mm x 95mm flat dimensions 56mm x 95mm finished dimensions 56mm x 83mm finished dimensions 56mm x 83mm stock woven label stock woven label SINCE 1949 SINCE 1949 fold line fold line item NT-LP1M [main loop label] item NT-LP1W [main loop label] flat dimensions 58mm x 55mm flat dimensions 58mm x 55mm finished dimensions 29mm x 55mm finished dimensions 29mm x 55mm stock woven label stock woven label XL XL XL MADE IN CHINA XL MADE IN BANGLADESH MADE IN USA OF IMPORTED FABRICS XL MADE IN CHINA XL MADE IN BANGLADESH MADE IN USA OF IMPORTED FABRICS fold line fold line item NT-SZ1M [size loop label] item NT-SZ1W [size loop label] flat dimensions 48mm x 16mm flat dimensions 48mm x 16mm finished dimensions 24mm x 16mm finished dimensions 24mm x 16mm stock woven label stock woven label (label size may not be to scale) Page 3 NT-CNC Label (content on below CNC label is for example only) Placement: Tops and Jackets - Inside left side seam, 4” up from hem Pants and Skirts - Inside left side seam, 3” down from waistband seam Back Front 7mm seam allowance 44mm Shell: 90% Polyester 10% Nylon Body & Upper sleeve lining: 100% Cotton Lower sleeve lining 100% Polyester Machine wash cold with like colors Delicate cycle No bleach Tumble dry low Remove promptly Cool iron if necessary Do not store damp item NT-CNC [care & content label] flat dimensions 33mm x 88mm finished dimensions 33mm x 37mm RN# 91871 7mm stock white satin seam allowance 33mm PO-ID Label Placement: Inside left side seam, under the CNC label Vendor Sourced S# = style number V# = vendor number PO# = PO number 5/8” item PO-ID Label S# V# PO# finished dimensions 5/8” x 5/8” stock white satin 5/8” (label size may not be to scale) Page 4 DJ-LP1 and DJ-SZ1 Loop Label Size Tab XL MADE IN XXXXX fold line fold line item DJ-LP1 [main loop label] item DJ-SZ1 [size loop label] flat dimensions 58mm x 55mm flat dimensions 48mm x 16mm finished dimensions 29mm x 55mm stock woven label finished dimensions 24mm x 16mm stock woven label Dream Jean loop label sewn into CB seam Size tab stitched to the left, and next to loop label Placement (centered) CB (label size may not be to scale) Page 5 NT-EF1W or NT-EF1M Endfold Label Endfold Label Main label stitched at ends size tab centered at bottom edge Main label tacked at each corner size tab centered at bottom edge Placement approx. 1” down from CB (centered) Placement approx. 1” down from CB (centered) CB CB SINCE 1949 SINCE 1949 XL XL MADE IN CHINA MADE IN CHINA CB CB SINCE 1949 SINCE 1949 XL XL MADE IN CHINA MADE IN CHINA (label size may not be to scale) Page 6 NT-EF2W or NT-EF2M Endfold Label Main label stitched at ends or all around Size tab centered at bottom edge of endfold Placement to be confirmed by NTO SINCE 1949 XL MADE IN CHINA SINCE 1949 XL MADE IN CHINA (label size may not be to scale) Page 7 NT-LP1W or NT-LP1M Loop Label Loop Label Main loop label sewn into CB seam Size tab set to the left and next to main label Main loop label sewn into CB seam Size tab set to the left and next to main label Placement (centered) Placement (centered) CB CB XL XL MADE IN CHINA MADE IN CHINA SINCE 1949 SINCE 1949 (label size may not be to scale) Page 8 SAHALIE LABELS fold line fold line SINCE 1972 fold line SINCE 1972 .com item SA-EF1 [main endfold label] customer id# flat dimensions 22mm x 67mm finished dimensions 22mm x 55mm stock woven label item SA-LP1 [2 sided loop label] flat dimensions 57mm x 45mm M A D E I N U SA O F I M PO R T ED FA B R I C S fold line M A D E IN B A N G L A D ESH M A D E IN C H IN A XL XL XL SI N C E 1 9 7 2 finished dimensions 45mm x 45mm stock woven label fold line . c om item SA-LP2 [2 sided loop label] flat dimensions 108mm x 16mm item SA-SZ1 [size straight cut label] flat dimensions 11mm x 80mm finished dimensions 11mm x 40mm stock woven label finished dimensions 95mm x 16mm stock woven label fold line fold line . c om . c om item SA-BF1 [2 sided loop label] flat dimensions 108mm x 16mm finished dimensions 95mm x 16mm stock woven label item SA-WBY1 [2 sided loop label] flat dimensions 108mm x 16mm finished dimensions 95mm x 16mm stock woven label (label size may not be to scale) Page 9 SA-CNC Label (content on below CNC label is for example only) Placement: Tops and Jackets - Inside left side seam, 4” up from hem Pants and Skirts - Inside left side seam, 3” down from waistband seam 7mm 44mm Machine wash cold with like colors Delicate cycle No bleach Tumble dry low Remove promptly Cool iron if necessary Do not store damp Shell: 90% Polyester 10% Nylon Body & Upper sleeve lining: 100% Cotton Lower sleeve lining 100% Polyester item 9 SA-CNC [care & content label] flat dimensions 33mm x 88mm finished dimensions 33mm x 37mm stock white satin RN# 91871 7mm 33mm PO-ID Label Placement: Inside left side seam, under the CNC label S# = style number V# = vendor number PO# = PO number 5/8” item 10 PO-ID Label S# V# PO# finished dimensions 5/8” x 5/8” vendor supplied white satin 5/8” (label size may not be to scale) Page 10 SA-EF1 Endfold Label Main label stitched at ends size tab centered at bottom edge Placement approx. 1” down from CB seam (centered) SA-EF1 (main endfold label) CB M A D E IN C H IN A XL SINCE 1972 (label size may not be to scale) Page 11 SA-LP1 or SA-LP2 Loop Label Loop Label Main loop label sewn into CB seam Size tab stitched to the left and next to loop label Placement (centered) Main loop label sewn into CB seam Size tab stitched to the left and next to loop label Placement (right edge at center) SA-LP1 (2 sided main loop label) SA-LP2 (2 sided main loop label) CB XL XL M A D E IN C H IN A SINCE 1972 M A D E IN C H IN A CB (label size may not be to scale) Page 12 SA-WBY1 or SA-BF1 Loop Label Loop Label Main loop label sewn into CB seam Size tab stitched to the left and next to loop label Placement (centered) Main loop label sewn into CB seam Size tab stitched to the left and next to loop label Placement (centered) SA-WBY1 (2 sided loop label) SA-BF1 (2 sided loop label) CB M A D E IN C H IN A M A D E IN C H IN A XL XL CB (label size may not be to scale) Page 13
© Copyright 2024 ExpyDoc
