YS61-0711
"Y" (WYE) STRAINER
TITAN
ANSI CLASS 150
®
TITAN FLOW CONTROL, INC.
f
f
FLANGED ENDS, RAISED FACE
CARBON AND STAINLESS STEEL
NEWLY DESIGNED...
Gauge Taps
MODELS:
STANDARD ON ALL
YS 61 MODELS IN
SIZES 2" ~ 24"
YS 61-CS
( CARB O N
STEEL )
YS 61-SS
( S TA I N L E S S
STEEL )
5" YS 61-SS
F
FEAT URES
s
NEW
DESIGN
SIZ E RAN GE: 1/ 2" ~ 24"
WITH
GAUGE
G A U G E TA P S F U R N I S H E D W I T H A P L U G O N B O T H T H E
I N L E T A N D O U T L E T S I D E S O F S I Z E S 2" T H R O U G H 24" .
D ETERMINE W H EN SCREEN CLEANING
LARGE
STRAINING
TECHNICAL
T H E S E TA P S A L L O W F O R E A S Y
I N S TA L L AT I O N O F P R E S S U R E G A U G E S T O M O N I T O R D I F F E R E N T I A L
s
T
TA P S
T I TA N ' S Y S 61 H A S C O N V E N I E N T
PRESSURE AN D
IS NECESSAR Y .
C A PA C I T Y
W I T H I T S L A R G E B O DY A N D S I Z A B L E S T R A I N I N G
ELEMENT
,
PRESSURE/ TEMPERATURE RATING
CS - ASTM A216 GR.WCB - CLASS 150
T H E Y S 61 P R O V I D E S E X C E L L E N T
O P E N A R E A R AT I O S T H AT A R E T Y P I C A L L Y T W O - A N D - A - H A L F T I M E S L A R G E R T H A N T H E
C O RRESP O N D ING PIPELINE .
s
PRECISION
M AC H I N E D
WOG (Non-shock) : 285 PSI @ 100 °F
Saturated Steam: 150 PSI @ 366°F
Maximum Liquid: 80 PSI @ 800 °F
S E AT S
P R E C I S I O N M A C H I N E D S C R E E N S E AT S I N B O T H T H E B O DY A N D C A P H E L P T O E N S U R E
A C C U R AT E
PO SITI O NING
O F T H E SCREEN D URING
REASSEMBLY AFTER CLEANING
T H E M A C H I N E D B O DY S E AT S E N A B L E F I N E R F I LT R AT I O N B Y P R E V E N T I N G
s
SELF
-CLEANING
.
ALSO ,
D E B R I S B Y PA S S .
W I T H A TA P P E D N P T B L O W - O F F C O N N E C T I O N , T H I S U N I T C A N B E F I T T E D W I T H A B L O W
DO WN
V A L V E W H I C H FA C I L I TAT E S
C O N TA C T
s
E P OX Y
CLEANING
O F T H E STRAINING
ELEMENT
FA C T O R Y F O R M O R E I N F O R M AT I O N .
.
-
PLEASE
WOG (Non-shock) : 275 PSI @ 100 °F
Saturated Steam: 150 PSI @ 366 °F
Maximum Liquid: 20 PSI @ 1000 °F
PA I N T E D
C A R B O N S T E E L U N I T S A R E E P OX Y
F C I A L S O O F F E R S E P OX Y
OPTIONAL
C OV E R
C O AT I N G
PA I N T E D T O H E L P R E S I S T R U S T A N D C O R R O S I O N .
T I TA N
A S A N O P T I O N F O R T H E Y S 61 .
DESIGNS
T I TA N ' S Y S 61 I S A V A I L A B L E W I T H D I F F E R E N T C O V E R O P T I O N S I N C L U D I N G S W I N G
A N D H I N G E T Y P E C OV E R S .
,
CLAMP ,
P L E A S E C O N S U LT FA C T O R Y F O R M O R E I N F O R M AT I O N O N T H E S E
• The abovelistedtemperaturesare theoreticaland
may vary duringactualoperatingconditions.
• Carbon Steelnot recommended
for prolonged
use above800 °F.
• StainlessSteelnot recommended
for prolonged
use above1000 °F.
O PTI O NS .
APPLICATIONS
s
PRESSURE/ TEMPERATURE RATING
SS - ASTM A351 GR. CF8M - CLASS 150
C A PA B I L I T Y
A
CARBON
STEEL
H A Z A R D S.
S TA I N L E S S
:
P R O P E RT I E S
C O N T I N U O U S S E RV I C E .
CARB O N STEEL STRAINERS
STEEL
P R O P E RT I E S
100 0° F I N C O N T I N U O U S S E R V I C E
PH A R M AC E U T I C A L
IN D USTRIES
.
,
C A R B O N S T E E L P E R F O R M S E X C E P T I O N A L L Y W E L L I N H I G H T E M P E R AT U R E S
I T P R O V I D E S H I G H R E S I S TA N C E
.
:
T O S H O C K , V I B R AT I O N , P I P I N G S T R A I N S
,
ARE O FTEN USED IN T H E O IL AN D PETR O C H EMICAL IN D USTRIES
S TA I N L E S S S T E E L I S C O M MO N L Y S P E C I F I E D F O R H I G H T E M P E R AT U R E
S TA I N L E S S S T E E L S T R A I N E R S
U P T O 80 0° F I N
AN D FIRE AN D FREE Z ING
.
S E RV I C E , U P T O
A R E C O M MO N L Y F O U N D I N T H E C H E M I C A L
,
FOOD
,
AN D
T he above data representscommonmar ket and ser vic e appl i c at i ons . N o repre s e ntat i onor g uarant e e ,e xpre s s e dor i mpl i e d,i s g i ve n due t o the nume rous
v ar i ati onsof conc entrat ionst,emperat uresand fl ow c ondi t i onst hat may oc c ur dur i ngac t ual s e r vi c e .
TITAN FLOW CONTROL, INC.
YOUR PIPELINE TO THE FUTURE!
Manufacturers Distributor, Inc. | www.TitanFiltrationsales.com
(813) 241 - 4900 | [email protected]
YS61-0711
BILL OF MATERIALS
PART
YS 61-CS
Flanged Ends • Raised Face • Carbon & Stainless Steel
A
(1)
8
YS 61-SS
(6)
1
Body (2)
Carbon Steel
A216 Gr. WCB
Stainless Steel
A351 Gr. CF8M
2
Cover
Carbon Steel
A216 Gr. WCB
Stainless Steel
A351 Gr. CF8M
3
Straining
Element (3)
Stainless Steel
Stainless Steel
4
Gasket (3) (4)
Stainless Steel
Spiral Wound
Stainless Steel
Spiral Wound
5
Studs
Alloy Steel
Stainless Steel
6
Nuts
Alloy Steel
Stainless Steel
7
NPT Plug
Blo
Carbon Steel
Stainless Steel
8
NPT Plug
Gauge Taps (5)
Carbon Steel
Stainless Steel
(Includes Raised Face)
D
Illustrationsare representativeof
sizes 2" through24" only. Pleaseask
for certifieddrawingswhenrequired.
1
5
3
66
4
1. Bill of Materials represents standard materials. Equivalent or better materials may be
substituted at the manufacturer's discretion.
2. Available in additional body materials, such as LCB,WC6,WC9, 316L, Alloy 20, and Monel.
3. Denotes recommended spare parts.
4. A wide range of gasket materials are available; contact factory for more information.
5. Part number 8 (NPT Plug - Gauge Taps) only applies to sizes 2" through 24".
6. Carbon Steel bodies are epoxy painted.
A DIMENSION
FACE TO FACE
(2)
B DIMENSION
CENTER LINE TO BOTTOM
C DIMENSION
SCREEN REMOVAL
D NPT Plug
BLOW-OFF
E NPT Plug
GAUGE TAPS
ASSEMBLED WEIGHT
APPROXIMATE
Flow Coefficient
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
lb
kg
Cv
½
15
6.50
166
3.50
89
5.00
127
3/8
10
N/A
N/A
5.5
2.5
C/F
¾
1 1¼ 1½
20
25
32
40
7.37 7.37 7.00 7.12
188 188 178 181
3.75 3.75 4.75 4.75
96
96 121 121
5.00 5.00 7.00 7.00
127 127 178 178
1/2
1/2
1/2
1/2
15
15
15
15
N/A N/A N/A N/A
N/A N/A N/A N/A
10.3 10.3 12.0 12.5
4.6
4.6
5.4
5.7
C/F C/F C/F
42
2 2½
50
65
7.87 9.75
200 248
5.25 6.50
134 166
7.00 9.75
178 248
1/2
1
15
25
1/4
1/4
8
8
21.0 32.0
9.5 14.5
70 110
7
2
Exploded View
DIMENSIONS AND PERFORMANCE DATA
SIZE
E
B
®
ANSI Class
150
C
TITAN
No.
WYE STRAINER
YS 61-CS - (Carbon Steel)
YS 61-SS - (Stainless Steel)
Web: www.TitanFiltrationSales.com
Phone: (813) 241 - 4900
Email: [email protected]
Fax: (813) 571 - 0422
(1)
3
4
5
6
8
10
12
14
16
18
20
24
80 100 125 150 200 250 300 350 400 450 500 600
10.06 12.12 15.62 18.50 21.37 26.00 29.87 36.00 41.75 46.00 49.50 58.37
256 308 397 470 543 661 759
914 1060 1168 1257 1483
7.00 8.25 11.25 13.50 15.50 18.50 22.25 25.00 26.50 31.00 39.00 45.00
178 210 286 343 394 470 566
625
673
787
991 1143
10.00 12.00 20.00 20.00 22.75 28.00 30.00 36.50 42.00 45.50 56.00 68.00
254 305 508 508 578 712 762
927 1067 1156 1422 1727
1 1 1/2
2
2
2
2
2
2
2
2
2
2
25
40
50
50
50
50
50
50
50
50
50
50
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
8
8
8
8
8
8
8
8
8
8
8
8
35.0 55.0 90.0 140.0 220.0 356.0 644.0 1000 1090 2400 2700 5000
15.9 24.9 40.8 63.5 99.7 161.5 292.1 453.6 494.4 1089 1225 2268
160 260 400 570 950 1600 2200 3300 4900 6100 8000 11000
1. Dimensions and weights are for reference only. When required, request certified drawings.
2. Face to face dimension includes raised face. These values have a tolerance of ±0.06 in (±2.0 mm) for sizes 10" and lower and a tolerance of ±0.12 in (±3.0 mm) for sizes 12" and larger.
REFERENCED STANDARDS & CODES
PRESSURE - TEMPERATURE RATINGS
CODE
DESCRIPTION
ASME/ANSI B16.5
Pipe Flanges and Flanged Fittings
ASME/ANSI B16.34
Flanged,Threaded, and Welding End
Size
Liquid
1/2" - 4"
SCREEN
Open Area
Steam
Open Area
1/16 (.0625)
41%
1/32 (.033)
28%
5" - 8"
1/8 (.125)
40%
3/64 (.045)
36%
10" - 12"
1/8 (.125)
40%
30 Mesh Lined
44.8%
PRESSURE
Body Material
- TEMPERATURE
A216 Gr.WCB
RATING
A351 Gr. CF8M
(Non-shock) :
285 PSI @ 100 °F
275 PSI @ 100 °F
Saturated Steam:
150 PSI @ 366°F
150 PSI @ 366°F
Max Liquid:
80 PSI @ 800 °F
20 PSI @ 1000 °F
WOG
SOURCE: ASME/ANSI B16.1
Carbon Steel
A216 Gr . WCB ANSI Class 150
Carbon Steel not recommended
for prolonged use above 800°F
250
SELECTIONS
Pressur e ( PSI)
STANDARD
300
Stainless Steel
A351 Gr . CF8M ANSI Class 150
Stainless Steel not recommended
for prolonged use above 1000°F
200
150
100
50
0
-100
0
100
200
300
400
500
600
Temperature ( °F)
700
800
900
1000
1100
Titan FCI makes everye ortto ensurethe informationpresentedon our literatureaccuratelyreflectsexact productspecifications.However,as productchangesoccur,theremay be short-termdi erencesbetweenactualproduct
specificationsand the informationcontainedwithinour literature.Titan FCI reservesthe rightto make designand specificationchangesto improveour productswithoutpriornotification.When required,requestcertifieddrawings.